The Adept Technology MV‑10 is a rack‑mounted 100–240 V power supply chassis (typically 10 or 20 slots) that delivers up to 5 A per output and includes built‑in power‑factor correction for the MV series. Common failure modes observed on this model are capacitor degradation in the main DC bus, overheating of the internal fan or heat sink, and tripped overcurrent protection caused by shorted outputs or damaged wiring harnesses. First‑check diagnostics: verify incoming AC voltage and phase balance; inspect the output rails with a multimeter for correct DC levels and look for any visible signs of capacitor bulging or burn marks; check the status LEDs or diagnostic codes on the chassis controller for fault flags such as “OCP” or “PF‑CORR”.[oss-gpt-20b]