Chadwick Helmuth 135M-11 Strobex

The Chadwick‑Helmuth 135M‑11 is a high‑intensity strobex blade tracker used for rotor tip imaging and vibration analysis on turbines or aircraft. Common failure modes include loss of illumination due to burned LEDs or failing oscillator modules, intermittent operation from loose 28 VDC connections, and internal capacitor degradation causing power supply instability. First‑check diagnostics: verify the 28 VDC input voltage and continuity of the wiring harness; inspect the strobe head for visible LED damage or overheating; review any recorded error codes on the controller panel for oscillator faults or power supply warnings.[oss-gpt-20b]

Need your Chadwick Helmuth repaired or tested?

We specialize in the repair and refurbishment of high-end industrial control electronics and power systems like this unit.

📞 Call Now: 1 (336) 969-0110

Free Estimates • Industrial-grade testing • Nationwide Service

Call to Purchase AI Services — help us build the next Grace Blackwell GX10 node.

Industrial AI Hardware Recovery — Free Diagnostic • Pay Return Shipping Only

[oss-gpt-20b]

We reclaim and repair GPUs and industrial AI hardware (cards, PSUs, fan modules, VRM boards). Free estimate — you only pay return shipping if you decline.

📞 Call: 1 (336) 969-0110 ✍️ Start Free Diagnostic

Free Estimates • Industrial-grade testing • 1-Year Warranty • Nationwide Service


Other Repaired Units by Chadwick Helmuth

Chadwick Helmuth 135M-12 901-8620 Strobe Light
Chadwick Helmuth 2000 201-1359003 Vibrex Controller
Chadwick Helmuth Vibrex 2000 Controller
Chadwick Helmuth 135M-11 Controller
Chadwick Helmuth 135M-11 Strobex
Chadwick Helmuth 135M-10B Oscillator
Chadwick Helmuth 135M-11 Light Tracker
Chadwick Helmuth 135M-11 Light Tracker
Chadwick Helmuth 135M-10B Strobex Blade Tracker
Chadwick Helmuth 135M-11 Strobex
Chadwick Helmuth 177M-6C Balancer
Chadwick Helmuth 135M-10A Strobex Blade tracker
Chadwick Helmuth 177M-6A Balancer
Chadwick Helmuth 177-M-6A Balancer
Chadwick Helmuth 135M-12 901-8620 Strobex
Chadwick Helmuth 2000 901-13590-3 Vibration Controller
Chadwick Helmuth Vibrex 2000 Digital Dynamic Balancer/analyzer
Chadwick Helmuth 2000 901-13590-3 Vibration Controller
Chadwick Helmuth 135M-12 901-8620 Strobex
Chadwick Helmuth 177M-6V Control Module
Chadwick Helmuth 135M-11 Strobex
Chadwick Helmuth 135M-11 Strobex
Chadwick Helmuth 177M-6A Balancer
Chadwick Helmuth 135M-11 Strobex
Chadwick Helmuth 135M-12 901-8620 Strobex
Chadwick Helmuth 8350 Balancer
Chadwick Helmuth 177M-6 Balancer
Chadwick Helmuth 135M-10B Strobex Blade tracker
Chadwick Helmuth 135M-10B Strobex
Chadwick Helmuth 177M-6V Control Module
Chadwick Helmuth Strobex 135M-11 Handheld Strobe
Chadwick Helmuth 177M-6A 901-4380 Balancer
Chadwick Helmuth 135M-12 901-8620 Strobex Light
Chadwick Helmuth Vibrex 2000 901-13590 vibration controller
Chadwick Helmuth Strobex 135M-11 Handheld Strobe
Chadwick Helmuth 135M-12 901-8620 Handheld Strobe
Chadwick Helmuth 177M-6A Strobe Calibration Unit
Chadwick Helmuth 8350 controller
Chadwick Helmuth 135M-11 strobe
Chadwick Helmuth 11 vibrex calibrator
Chadwick Helmuth 5350 balancer

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.