Procond EWM 1000 Plus W1A0DDBF is the main control board for Electrolux front‑loading washers and similar industrial appliances; it drives motor timing, water level sensors, and user interface circuitry. Common failures on this model include power‑rail degradation (especially the 12 V/24 V supplies), burnt or cracked ICs in the microcontroller array, failed MOSFET drivers for the motor controller, and shorted or open relays that manage pump and heating elements. The board also frequently shows intermittent faults when the front‑panel display or touch‑screen interface is disconnected, indicating a weak ground or decoupling capacitor issue.

First‑check diagnostics: verify all input power rails with a multimeter (look for voltage sag under load), inspect the board visually for burnt components or cracked traces, and check the status of the motor‑driver MOSFETs and relay contacts; finally review any stored error codes via the diagnostic port to pinpoint sensor or communication failures.[oss-gpt-20b]