Seiberco Inc 21005-1 Servo Drive

The Seiberco Inc 21005‑1 is an AIM HX Series 5000 DSHX servo motor driver that accepts a 115 VAC input and communicates via serial (RS‑232/422). Common failure modes for this unit include over‑temperature shutdown of the power MOSFET array, loss of communication due to corrupted firmware or damaged UART pins, and degradation of the onboard DC/DC regulator causing voltage ripple on the motor supply rail. Initial checks should verify that the 115 VAC supply is within spec and that the output bus voltage matches the datasheet; inspect the board for burned traces or swollen electrolytics around the power stage; then read any status LEDs or error codes via the serial port to confirm firmware integrity.[oss-gpt-20b]

Need your Seiberco Inc repaired or tested?

We specialize in the repair and refurbishment of high-end industrial control electronics and power systems like this unit.

📞 Call Now: 1 (336) 969-0110

Free Estimates • Industrial-grade testing • Nationwide Service

Call to Purchase AI Services — help us build the next Grace Blackwell GX10 node.

Industrial AI Hardware Recovery — Free Diagnostic • Pay Return Shipping Only

[oss-gpt-20b]

We reclaim and repair GPUs and industrial AI hardware (cards, PSUs, fan modules, VRM boards). Free estimate — you only pay return shipping if you decline.

📞 Call: 1 (336) 969-0110 ✍️ Start Free Diagnostic

Free Estimates • Industrial-grade testing • 1-Year Warranty • Nationwide Service


Other Repaired Units by Seiberco Inc

Seiberco Inc AIM 4000 Drive
Seiberco Inc 482 Control Panel
Seiberco Inc 2342-022 Control Board
Seiberco Inc 2342-022 Motor
Seiberco Inc 21005-1 Servo Drive
Seiberco Inc 21005-1 Servo Drive
Seiberco Inc 21039-2

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.