The Walty Way B E95‑050 Shear Controller is an industrial electronic drive that regulates the shearing blade’s speed and position through programmable logic and motor feedback. Common failure modes for this class of controllers include power supply degradation (brown‑out, over‑voltage), overheating of the main driver ICs or MOSFETs, and loss of communication with the PLC or HMI due to faulty I/O modules or cable breaks. Initial troubleshooting should verify that the 24 V DC rail is within spec, inspect the board for burnt components or loose solder joints, and check all input/output signals against the wiring diagram; reviewing any stored error codes on the controller’s display will often pinpoint the root cause.[oss-gpt-20b]