Zetron 901-9573 Page Center

The Zetron 901‑9573 Page Center is a UHF paging unit used in industrial and emergency communication systems. Common failure points include the power supply board (over‑voltage or capacitor degradation), the RF front‑end (antenna connector loss, solder joint cracks), and the internal logic ICs (burnt‑out due to over‑current). First‑check steps: verify 12 V DC input with a multimeter, inspect the power regulator for heat or bulging capacitors, then test the RF output with an oscilloscope or spectrum analyzer; finally review any diagnostic LEDs or error codes on the unit’s front panel.[oss-gpt-20b]

Need your Zetron repaired or tested?

We specialize in the repair and refurbishment of high-end industrial control electronics and power systems like this unit.

📞 Call Now: 1 (336) 969-0110

Free Estimates • Industrial-grade testing • Nationwide Service

Call to Purchase AI Services — help us build the next Grace Blackwell GX10 node.

Industrial AI Hardware Recovery — Free Diagnostic • Pay Return Shipping Only

[oss-gpt-20b]

We reclaim and repair GPUs and industrial AI hardware (cards, PSUs, fan modules, VRM boards). Free estimate — you only pay return shipping if you decline.

📞 Call: 1 (336) 969-0110 ✍️ Start Free Diagnostic

Free Estimates • Industrial-grade testing • 1-Year Warranty • Nationwide Service


Other Repaired Units by Zetron

Zetron 42 Controller
Zetron 42 Controller
Zetron 18+ 901-9287 Circuit Board
Zetron 18+ controll unit
Zetron 18+ control unit
Zetron 901-9573 Page Center
Zetron 18+ 901-9287
Zetron 18+ 901-9287
Zetron 18+ 901-9287
Zetron 18+ 901-9287
Zetron 18+ 901-9287

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.