MPA‑04342 is a Cleveland Motion Control Pacemaster 1 single‑phase DC drive rated 0.25–2 HP, operating from 115/230 V AC and delivering up to 180 V DC output. Common failure points on this class of drives include burned or tripped fuses, degraded rectifier diodes, worn motor windings, and overheating of the power stage due to inadequate ventilation. Initial checks should verify that the input supply is within spec and the fuse rating matches the drive’s current draw; inspect the rectifier bridge for cracked or bulging diodes; confirm the output DC voltage under no‑load conditions falls within 90–180 V, and review any error codes displayed on the front panel.[oss-gpt-20b] |
Need your Cleveland Machine Control repaired or tested?
We specialize in the repair and refurbishment of high-end industrial control electronics and power systems like this unit.
📞 Call Now: 1 (336) 969-0110
Free Estimates • Industrial-grade testing • Nationwide Service
⚡ Call to Purchase AI Services — help us build the next Grace Blackwell GX10 node.
We reclaim and repair GPUs and industrial AI hardware (cards, PSUs, fan modules, VRM boards). Free estimate — you only pay return shipping if you decline.
Free Estimates • Industrial-grade testing • 1-Year Warranty • Nationwide Service
Cleveland Machine Control MPA-04342 Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.
Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.