John Deere Service & Repair Forum
I have a John Deere RE219402 controller that is not functioning properly. The unit fails to power on and does not respond to any input commands. I have attempted to troubleshoot the issue by checking all connections and ensuring proper power supply, but the problem persists. Based on my assessment, the controller likely needs to be replaced. The estimated cost for a replacement John Deere RE219402 controller is approximately $300 to $500 based on current market rates. I am seeking repair service to address this issue
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "John Deere"
- John Deere → John Deere RE66821 7AT6JD01 ↗
- John Deere → John Deere RE64583 7SUD5JD04 ↗
- John Deere → John Deere BALE TRAK PLUS RE159944 ↗
- John Deere → John Deere MOTOROLA RE64583 ↗
- John Deere → John Deere RE63440 7SUD4JD03 ↗
If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 331 Comments
Hello, I am inquiring about the John Deere RE66265 7MRT8JDO1E Digital Tachometer. Our team is looking for information on whether this unit is still supported and if replacement parts are available. Could you please provide us with information regarding the current status of this model? Thank you. —>…Purchase or Repair: 
...
Show More
Show More
The John Deere Bale Trak Plus RE159944 is not functioning properly and needs maintenance.
—> Purchase or Repair:
—> Purchase or Repair:
the John Deere RE66821 7AT6JD01 Analog Tachometer unit went down mid-shift. Needs attention ASAP!
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE66265 7MRT8JDO1E Digital Tachometer is displaying abnormal behavior - it is not functioning as expected.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere AT320355 AT320694 is a CAN Monitor Unit that is currently not working.
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing SCV setup panel issues on John Deere RE63440 7SUD4JD03 suspect a drive or board failure. Need immediate inspection and replacement.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE49192 7THM2JD03 tachometer is displaying inconsistent readings and is fluctuating erratically, making it difficult to accurately measure engine RPM. It may need to be inspected and possibly replaced to ensure proper functioning.
—> Purchase or Repair:
—> Purchase or Repair:
Equipment down with error code displayed on John Deere RE64583 SCV Setup panel. Need urgent assistance troubleshooting issue to resume operation.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm interested in the John Deere RE46704 7AT2JD01 part for a tach display. Could you please provide information on pricing and availability? I'm looking to source this unit quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing an issue with the SCV setup panel on my John Deere RE64583 7SUD5JD04. Something seems to have stopped working, and I'm not sure what the exact problem is. Any guidance or assistance would be greatly appreciated.
—> Purchase or Repair:
—> Purchase or Repair:
Equipment down due to faulty tachometer (John Deere RE49192 7THM2JD03). No display on screen, possible internal connection issue. Need urgent repair.
—> Purchase or Repair:
—> Purchase or Repair:
My John Deere Bale Trak Plus RE159944 isn't displaying any data or responding. Looking for a technician who can troubleshoot and repair it
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE172237 7VMU0JD01 Vehicle Monitor is failing to display critical data, causing delays and disruptions in our production line. Immediate repair service is urgently needed to prevent further downtime.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE65483 7SUD5JD04 is not functioning properly, acting in an unusual way. Please provide more details so we can better assist you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I've noticed that the John Deere Bale Trak Plus RE159944 is displaying abnormal behavior. Instead of functioning as usual, it seems to be acting strangely. Thank you for looking into this issue for me.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE64583 7SUD5JD04 experienced downtime due to issues with the SCV Setup Panel. The incident occurred during our shift. Please provide insights on what went wrong before the next shift begins.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please provide pricing and availability for the John Deere RE43902 7MRT2JD02 controller? I'm looking to source one quickly. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Do you have a John Deere RE66265 7MRT8JDO1E Digital Tachometer available for repair or purchase? Need one urgently to keep production running smoothly.
—> Purchase or Repair:
—> Purchase or Repair:
The unit with part numbers AT320355 and AT320694, which is the CAN Monitor Unit, is behaving abnormally. It is not functioning as it normally does and appears to be acting strangely.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I wanted to inform you that the John Deere SE502802 controller unit malfunctioned today during the morning shift, resulting in unplanned downtime. Can you please provide me with an update on the issue before the next shift begins? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
John Deere RE66821 7AT6JD01 is down, not functioning correctly. Analog Tachometer not working, no response to any input. Please advise on next steps for repair. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The CAN Monitor Unit on the John Deere AT320355 AT320694 is malfunctioning, causing a disruption in the production line. Immediate attention is needed to resolve this issue efficiently and resume operations swiftly.
—> Purchase or Repair:
—> Purchase or Repair:
the John Deere RE49192 7THM2JD03 tachometer unit went down mid-shift. Please check it out and troubleshoot first thing in the morning. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
Do you have a John Deere Bale Trak Plus RE159944 available for sale or repair? Our unit has gone down, and we need to get production up and running quickly.
—> Purchase or Repair:
—> Purchase or Repair:
Bale Trak Plus RE159944 unit malfunctioned mid-shift. Please check and repair tomorrow.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE64583 SCV Setup panel unit is displaying unusual behavior. The panel is not functioning as expected and is acting strangely.
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, we have a John Deere RE66265 Digital Tachometer that needs repair or replacement. Can you provide guidance on how to fix it or where to find a replacement part? Please reply ASAP. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
John Deere RE64583 7SUD5JD04 SCV Setup Panel down. Needs attention ASAP. Please check and repair in the morning. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE43902 7MRT2JD02 Controller is malfunctioning, causing a halt in production. Urgent repair is needed to get the line running smoothly again.
—> Purchase or Repair:
—> Purchase or Repair:
Please provide me with more information about the John Deere RE66821 7AT6JD01 Analog Tachometer. I need to know if it is still supported and if replacement parts are available. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Can you please confirm if the John Deere RE66821 Analog Tachometer is still supported or if there are replacement parts available? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Can the John Deere RE64583 7SUD5JD04 SCV Setup Panel be repaired or purchased? I am trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE64583 7SUD5JD04 is displaying error code E342. The SCV setup panel is unresponsive, preventing operation of the equipment. Please advise on troubleshooting steps or necessary repairs. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE64583 7SUD5JD04 experienced downtime due to an issue with the SCV Setup Panel. The incident occurred earlier this shift, and I am seeking a quick answer before the next shift begins. Thank you for your
—> Purchase or Repair:
—> Purchase or Repair:
Do you have a replacement John Deere RE64583 7SUD5JD04 SCV setup panel available for sale or repair? It's urgent to keep production running.
—> Purchase or Repair:
—> Purchase or Repair:
Looking for repair help for my John Deere RE64583 7SUD5JD04 SCV Setup panel. The unit is not responding to inputs, causing operational issues. Need immediate assistance.
—> Purchase or Repair:
—> Purchase or Repair:
Can the John Deere AT320355 AT320694 CAN Monitor Unit be repaired or purchased as a replacement? I'm trying to address this
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE66221 7EHH6JD01 electronic hitch is showing error code E306. Equipment not lifting as programmed. Need immediate assistance troubleshooting and resolving the issue to minimize downtime.
—> Purchase or Repair:
—> Purchase or Repair:
The digital tachometer on the John Deere RE66265 7MRT8JDO1E is malfunctioning, affecting the production line. Please address this issue urgently to minimize downtime.
—> Purchase or Repair:
—> Purchase or Repair:
Hi, do you have a John Deere RE64583 7SUD5JD04 motor control unit available for sale or repair? Our production is down, and we need to get it fixed quickly to keep operations running smoothly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Can you please provide information on whether the John Deere AT320355 AT320694 CAN Monitor Unit is still supported or if replacement parts are available? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Please provide more details about the John Deere RE63440 7SUD4JD03 SCV setup Panel so that we can check if it's still supported and if replacement parts are available. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Can the John Deere RE66821 7AT6JD01 Analog Tachometer be repaired or purchased to resolve the issue? Checking this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
The John Deere RE64583 7SUD3JD01 SCV Setup panel is displaying erratic behavior and not functioning as expected.
—> Purchase or Repair:
—> Purchase or Repair:
Please provide an update on the repair status of the John Deere RE66265 Digital Tachometer (7MRT8JDO1E) immediately. Your
—> Purchase or Repair:
—> Purchase or Repair:
I understand that the CAN Monitor Unit in your John Deere AT320355 AT320694 is not functioning properly. The exact issue with the machine is unclear, but we will do our best to assist you and resolve the problem as soon as possible. Thank you for bringing this to our attention. —> …Purchase or Repair: 
...
Show More
Show More
Can you please provide information on whether the John Deere RE64583 7SUD5JD04 SCV setup panel is still supported and if replacement parts are available at this time? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: