T for Service call 1-336-969-0110 at Industrial Electronics Repair

T Service & Repair Forum

If you need your unit tested or repaired then give us a call.
We offer fair estimates and offer extended warranties.

You can contact us at 1-(336)-969-0110
Shipping/Receiving
Industrial Electronic Repair
931-E S. Main St #204,
Kernersville, NC 27284
Phone: (336) 969-0110

We repair industrial electronic devices

If you have an industrial electronic device that needs repair,
Feel free to contact us!

— Posted by Sales on 2005-05-09

Reply🗨️Ask a New Question Below❓

If you need your T unit tested or repaired,
give us a call at 1-336-969-0110.
We offer fair estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 367 Comments

#Todd Engineering by john scoggins on 2005-01-16 00:00

We are experiencing a critical issue with the circuit board on our Todd Engineering ts30, resulting in a complete halt to our production line. Urgent repair is needed to avoid further delays and disruptions. Please prioritize this service request to get our operations back up and running swiftly.

#Techmalux by Donald Albin, Maintenance Dept. on 2005-05-20 15:29

I have a defective light as described above. Can you either repair this light or supply us with a replacement? Thanks

#Techmalux by Sales on 2005-05-20 21:26

There are many different versions of the TECHMALUX HALOGEN LAMPS SE-418, SE-436, KE-418, KE-424, KE-436, etc Do you have a model number for the unit?

#Takuma Seiko by Judy Marshall on 2005-06-02 15:01

Can you tell me if you have repaired Takuma items? I have a Motor Driver Card part number 00529, and a Motor Driver part number DR24V.Thank You,Judy Marshall

#Techmalux by Scott B. on 2005-06-22 15:08

I would like to know a price on a techmalux light #591-054-006, KE /418, 24 vdc/18w. Thank You.

#Texas Instruments by Wilco Stroo on 2005-07-18 00:00

Texas Instruments 505-4916-a not powering on. Need immediate repair assistance.

#Techmalux by Stanley E. Goodman on 2005-08-10 17:00

We are a state school and have a Charmilles wire EDM machine. It has a Techmalux light assb. # 591-034-003 (other numbers,D-78727, SE/418, IP67) We have repaired it a couple of times but it has started to leak and has stopped working. I was looking for a replacement cost. As you probably know it is ...
Show More

#Techmalux by Jon Tylock on 2005-08-15 15:44

I am interested in replacing this light. Please, send me pricing and availability information. Thank you.

#Taylor Electronics by Bruce Cunningham on 2005-08-29 17:52

my SYBRON-TAYLORhas stopped recording the correct speed--at low wind speed the indicator wiggles only a small amount---at high wind speed it moves only slightly up the scale---the cups seem to rotate at different speeds ie as the wind builds to higer speeds the cups rotate faster---as best i can tel...
Show More

#Todd Engineering by claeys on 2005-10-14 00:00

Hello, it sounds like there may be an issue with the Todd Engineering PC55A battery charger/power supply. The symptoms reported include the unit not turning on and no power output. Please check the power source and connections as a first step.

#Techmalux by Miroslaw Bator on 2005-10-26 16:13

Advise price and delievery time for new light fixture, LUMOLUX KE/418 24VDC/18W art. no- 591-054 006How much would cost to repair an old one?Please advise A.S.A.P

#Techmalux by Mike Brooks on 2005-11-09 13:54

Dear Sir or Madam,We are looking for a supply of lights for a MAHA MOT lift.The light package is numbered: 4967 and is a 4\' light tube. The lift is a 4 post 3.5tPlease supply delivery & price in sterling.Thank you,Mike Brooks

#Tokyo Shindenki by Le Hai Duong on 2005-11-14 05:04

Dear sirs or madam, As first, let us introduce our-self.Our company is a Joint venture between Asea Honda (Thai partner), Machino Import Corp. (Vietnamese partner),Showa Corp., and Itochu Copr. (Japanese partners). Our activity field is producing parts for motorcycle. Now our butt welder machine had...
Show More

#Tracor Westronics by John Landua on 2005-12-09 02:58

I am looking for a Tracor Westronics DDR 10 System Manual. Do you have one or know where I can find one? I would be happy to pay to have one copied. I need to figure out how to move data to a PC system from an existing DDR 10 on site, and cannot find a manual in our shop or engineering library.Thank...
Show More

#Taylor Electronics by James S. Chatfield on 2006-01-07 21:04

The weathervane rod bent due to some unknown reason and when I took off the top I noticed the vectical shaft was also worn very bad. Do you sell the whole package that sits on top of the roof? The machine was in for repair back in 12/17/82, bought in Sept of 73. Rough weather up here near Rochester,...
Show More

#Tde Macno by Richard Kolb on 2006-01-25 00:00

Having issues with my TDE Macno OSC06N10X drive not responding to control inputs. Need assistance with diagnosis and repair ASAP.

#Tempsonics by ZEESHAN on 2006-01-28 07:21

We have a machine called DESMA from Germany . HAving a TPU pouring head whcih has TEMPOSONIC position Sencor with following details;Serial Number : RHM 0300MD701S2G4100RANGE 0.1mm / 24 bit gray.GRD: 2782.06 M/SF.NR: 04303162.The above Sencor is not working , And red light is blinking ,so the operati...
Show More

#Techmalux by GARY MACEY on 2006-03-01 08:36

We have a machine with a ke/418 model lamp fitted. Is there any uk based suppliers that we can contact to repair/purchase a new lamp.best regardsGary MaceyMacvere Engineering Ltd

#Tajima by Noel Declaro on 2006-03-11 08:42

I would like to know if you can repair the above mention PCB? How long it take to repair and how much it will cost?

#Taylor Electronics by David R. Watson on 2006-03-31 19:51

I would like to know if I can purchase the roof unit ( wind/speed indicator and wire )for the 3108 Weatherscope or if I can use a different/more current model that will work as well. I was given the Weatherscope, but I cannot access the weather/wind vane at this time. Thanks, any other info. on this...
Show More

#Therm-L-Tech by Gary Vodvarka on 2006-04-11 18:35

I need to know if you still repair these boards. Gary

#Teca by Dawn Hoff on 2006-05-23 19:39

WE HAVE TWO TECA MODEL M MACHINES THAT NEED REPAIR. SERIAL # B131804.

#Teijin Seiki by Frank Taylor on 2006-07-01 01:23

We need a manual for the Teijin Seiki AR60 drive.Thanks

#Teijin Seiki by KENNY SMITH on 2006-07-18 14:51

FRANK TAYLOR, IF YOU STILL NEED IT, I HAVE A COPY OF THE AR60 OPERATION MANUAL ON MY COMPUTER. I AM CURRENTLY HAVING TROUBLE WITH MINE AND WAS ABLE TO GET ONE FROM MY MACHINE MANUFACTURER. I WILL GLADLY EMAIL IT TO YOU. IT IS 170 PAGES LONG SO AN EMAIL ADDRESS WITH A LARGE CAPACITY IS NEEDED FOR ME ...
Show More

#Tecaprint by Jeremiah Shem E. Santos on 2006-07-23 21:16

Hello There,This is Shem Santos, Mark Process Engineer of Amkor Technology Philippines. Would like to ask for your expert opinion in our quest to improve TPC 261 cure time from 1.5 Hrs to 1 hr. Out current temperature setting is 110 degrees celcius.If ever I opted for 1 hr for faster cycle time do i...
Show More

#Tde Macno by Holger Ploesser, Migona GmbH on 2006-08-11 10:18

Hello,we have 2 drives of the type DSCH 15N/B0, but no manual. We have to assemble them to a machine in about 2 weeks. On the homepage of the manufacturer there is no possibility to download a manual.Is it possible to get a manual from you via E-Mail? It´s urgent!Many thanks in advance.GreetingsH. P...
Show More

#Telind by Gamal Perez on 2006-08-12 14:49

DEAR FRIENDA NEDD TO MANUAL CONTROLLER TELIND MOD DE4410BEST REGARD GAMAL PEREZ

#Tracor Westronics by Richard Torp on 2006-08-23 15:35

Looking for the clear plastic door that cover the chart paper. The manual we have does not provide a part number. The manual number is MO 100021-01. The cover is shown on page 5-17 figure 5-33.

#Tsudakoma by Araujoa Ramon on 2006-08-23 16:10

Hi:Let me know if you have for sale a copy form Tsudakoma Rotary axis wire electric conection diagrams (Anphenol conectors)Model: RN 150L or RN 150RPlease tellme how much is an how can to pay.Thanks

#Therm-L-Tech by David Borchert on 2006-08-25 15:18

I have a Freezer door with a cicuit board of some type in it made by a compnay called Therm - L - Tec. I cannot find any information on this door manufacturer. I think they have gone out of business. We have several places on the circuit board that are bad. Can these be repaired? Please Respond by E...
Show More

#Taylor Electronics by darren on 2006-09-21 15:00

we are looking for parts that go from the back of our barameter to the tower. it is a old unit. The only thing I see on it is model E weatherscope by Taylor. It is a wind guage, wind direction, temp and barameter. Thanks for your help. Darren

#Takagi by rolly north on 2006-10-01 14:43

I have some questions about the wiring diagram. I am using my takagi tk1s for experimental purposes and was wondering if I could modify the amount of natural gas it uses and also modify the way it fires on start up. Any info or help would be greatly appreciated! Thank you!!!!

#Trane by GERAB on 2006-11-18 00:00

Subject TRANE X13650780-05 Repair RequestHi there,I'm reaching out on behalf of our technician in the shop. They mentioned the TRANE X13650780-05 unit isn't working. Could you please help us look into this?Thanks!

#Teijin Seiki by Ricardo Villada on 2006-11-29 18:51

HelloI need a manual for ani AR vigo servo (best for ARS30).Tank you

#Teltrend by Miroslaw Labuda on 2006-12-29 00:00

HDSL repeater Teltrend HRP6819 not boosting signal beyond 100 meters. Need repair as soon as possible.

#Texas Instruments by khalid firoz on 2007-02-02 11:13

we have a concrete block manufacturing plants of Columbia Machines equiped with TI 5 sequencers and a whole [plant is electronicaly controled including P T S.(pallet transport system ) at present we understand that the system is out dated we want o upgrade our system and would like to receive a qout...
Show More

#Tajima by CARLOS MARTINEZ on 2007-02-12 16:40

I HAVE A TMEF-H612 EMBROIDERY MACHINE THAT ITS X/Y CONTROLLER IS DAMAGED AND I WANT TO KNOW IF YOU CAN REPAIR THIS BOARD AND HOW MUCH IT WILL COST.

#Teijin Seiki by Dave Keeton on 2007-02-23 14:59

If you still have a copy of that manual I could sure use it...... Dave Keeton

#Teijin Seiki by Anthony Leung on 2007-04-03 04:26

I need the manual for the VIGOSERVO ARS30.ThanksAnthony Leung

#Twin by Rafael Diaz on 2007-04-25 00:00

The T-win PS-2S400EP industrial power supply unit is not powering on when connected. Looking for a technician who can diagnose and repair this issue

#Therm-L-Tech by Peter Albrecht on 2007-05-02 22:25

We used to develop some electronics for Therm L Tech in Kansas City Kansas.If you have any problems please contact us via email at 808 - 227 - 7957Boards which have only relays where not manufactured by us, but we can service them.If you want to contact us via e-mail: thermltech@ihtltd.comP.S. We wi...
Show More

#Tracor Westronics by Tawanda Mulilo on 2007-05-03 14:01

Please advise on calibrating the above unit being used as a temperature indicator. When i select a channel to be calibrated and make adjustments, it effects an equal change to all the other channels to which it is multiplexed while we only want to calibrate a single channel.Regards

#Texas Instruments by Jiong Hong on 2007-05-20 00:00

Texas Instruments 505-4332 not powering on, no display. In need of repair ASAP.

#Tokyo-Rikosha by Rob / PSI Printing on 2007-07-09 13:53

I need to know if you can repair or replace the following part.Tokyo RikoshaVaritapVP-03ALine V. 100/110V 3A

#Teijin Seiki by MIKE PIERCE on 2007-08-07 14:16

We have the above mentioned unit for our kitamura cnc and the one that the maintenance company supplied does not work, can you rebuild this unit? are they available for purchase as rebulit units.thanks

#Therm-L-Tech by Mark H. on 2007-08-07 16:13

having problem with close limit slipping and also the pull cord works sometimes you can hear the plc humming but nothing happens when you pull the cord need manuals and schematics Thank You Mark H.

#Teledyne Gurley by Israel Sánchez on 2007-08-09 13:36

Good Morning Could you please send a formal quotation for this equipment the labor consist in checking the correct functionality and calibrationPlease include delivery time and method to pay this job ?Teledyne Gurley Model HRS-20PA-BRD& 8325-360-CBQA Encoder System.AttentionIsrael SanchezSiemens...
Show More

#Tenma by Carl Little Jr on 2007-09-06 21:03

This is a Tenma 72.6345 Solder Rework Station.It is not in warranty. This equipment has a digital display for the soldering part that is not working properly.I am an electronic techician by trade and I would like to repair this unit but I am having a problem locating a schematic.Is it possible to pu...
Show More

#Telind by Nuno Ferreira on 2007-09-14 16:12

Dear Sirs, I would like to receive the manual of the model MP011 from Telind manufacturer.Many thanksNuno Ferreira

#Teijin Seiki by Tom on 2007-09-21 14:37

We have purchased a used machine with an ar60 drive which we are having trouble with. I having been looking for the manual and found this thread. if you could send me a copy it would be greatly appreicated.Thank youTom T

#Transrex by Marvin Lien on 2007-09-25 17:35

I am interested in acquiring relay boards or parts for relay boards models 34053 and 35739. I can find the relays and the relay sockets but cannot find the spade lug connectors that the board uses. I can either by parts or complete replacement boards if you have them. Thanks.

#Tajima by surbhi jain on 2007-10-10 11:34

DEAR SIR I WANT TO BUY DU10 XY CARD, WORKING CONDITION,PLEASE TELL ME THE PRICE AND ALSO THE COURIER CHARGES.THANKS.SURBHI,.

#Teca by Amy Waggoner on 2007-10-11 18:35

The information on the unit is emg/ep td20 mki pleasantville NY

#Teijin Seiki by Sam on 2007-10-18 22:50

Hi I\'m also in need of this manual desperately. If you could email me a copy it would be appreciated

#Teijin Seiki by Agoes on 2007-10-24 04:37

We need Ar series manual for set the parameter on my drive teijin seiki ARS30, because the battery has dropped.thanks

#Tracor Westronics by Joe Lyons on 2007-10-25 12:14

I have an SDI 310 digital indicator system which is multiplexed to 4 MX60 remote mounted Mux units. After a recent power outage, We lost the display / keypad module and the ADC card (current driver seems to have gone bad-- every point flashing INVALID DATA).I used the last of my spares getting this ...
Show More

#Telemecanique by NURIA on 2007-11-08 15:32

Dear Sir/Madam;we need to know assap if you can repair the following board of TELEMECANIQUE.The reference is:885015-41-03Please, it\'s very urgent for us!Thank youBest regardsNuria

#Thermal Dynamics by Jason Joiner on 2007-12-07 21:03

I have a Thermal dynamics pak master 50xl plus I have a part# 9-8010 logic / gate drive pcb board that needs repair can you fix mine? and how much would it cost me?

#Thermal Dynamics by Kim Ware on 2008-01-09 23:11

I have a Pakmaster that also has a bad board. Maybe we have enough parts to make one good machine.

#Taylor Electronics by Jeff on 2008-01-21 15:45

David,I too have become the owner of an older 3108c Weatherstation. I was fortunate enough to get the instruction booklet with it, but like you, I have no roof unit to feed it a signal.I\'ve looked around the Internet to no avail and wondered if you ever found a source for one?Thanks in advance for ...
Show More

#Tajima by warner gonzalez on 2008-02-08 01:39

I have an embroidery machine tajima temg-g618 but it is does not work only can see in the screen the next code :3d7main shaft motor speed control have some problem .or cpu board is bad .Can you help me?Thank you so muchwarner

#Thermal Dynamics by Hershel Pearl on 2008-03-04 19:23

I have w-Thermal Dynamics plasma cutter that apear to be be bad. The first one is a Pakmaster 50.It has a bad ldd board in the Thermal Dynamics PakMaster 50. Can you repair it? If so, about what does it run?I\'m still trouble shooting the ecno 50 to see what\'s wrong with it.Thank you,Hershel

#Teijin Seiki by KRIANGKRAI PHROMPAK on 2008-03-10 09:47

I NEED MANUAL FOR THE SERVO DRIVE TEIJIN SEIKI AR60 THANKS YOU

#Thermal Dynamics by wilson ray walls on 2008-04-03 01:42

my son knock it off of the stand and fell on the concrete it broke off the regulater/assembly can i get a replacement part.

#Techmalux by DWIGHT KEARNEY on 2008-04-04 17:50

I HAVE A LAMP; THAT CAME IN A CHARMILLES MODEL 290 EDM WIRE MACHINE. MY COLLEAUGE HAS PREVIOUSLY HAD THEM SHIP HIM A REPLACEMENT BALLAST BOARD FOR THIS LAMP AND THE PART THAT THEY SENT WAS NOT A DIRECT REPLACEMENT. I CONTACTED THE CUSTOMER SERVICE DEPARTMENT FROM CHARMILLES TO GET TECH INFORMATION O...
Show More

#Tasc Drives by Kjeld Jensen on 2008-04-14 12:27

We have one TASC unit, Type 132 CD/6. Mod. 4, IP55, Nm 24, Serie nr. 178571-3. 90 V, 3,3 ADCIt has been standing still for some periodes. Now the iron disc with cupper has been corroded ) because off wet environment. Can you offer us a new iron/cupper disc and what is the price and delivery time?Kin...
Show More

#Telind by Narong Wonghanchai on 2008-06-18 12:38

I buy the machine \' GARZATRICE\' Mod. PEGASO-X5/VE from COMET. Now it can\'t running . I saw in electrical drawing manual. I want to interview Mr. Simocini Simone\"who signs in drawing\" to ask him \"Who can repair it.

#Techmalux by David on 2008-07-16 16:18

What is the cost for a Lumllux KE/418 glass tube that protects the light bulb and fixture?Regards,Dave

#Teijin Seiki by Alain JOUSSET on 2008-07-30 06:21

Bonjour,Nous sommes à la recherche d\'un variateur TEIJIN SEIKIIndications relevées sur variateur en panneAR15A 120 - BA0S/N 1H 185C/N 488 406Dans l\'attente de votre réponse.SalutationsAlain JOUSSET

#Techmalux by Chris Taylor on 2008-08-05 19:01

A couple of weeks ago, we had sent in a techmalux light to be repaired. (light is from a Citizen swiss turn machine). I was just wondering if you could let me know what the repair status is on this.Thank you,Chris TaylorCarolina Precision Mfg.1183 Gateway Dr.Mooresville, NC 28115ph. 704 662-3480fax ...
Show More

#Takagi by JEFF SHARB on 2008-08-23 09:16

WE HAVE A TM-1. HERE\'S WHAT HAPPENS-BLOWER TURNS ON, THEN A 2ND BLOWER. IGNITER SPARKS, BUT WE HAVE NO FLAME. TAKAGI SAYS GAS VALVE(S) ARE OPENING (TECH SAID HE COULD HEAR IT OVER THE PHONE) BUT I DON\'T THINK THEY ARE. TECH SAID TO CHECK INCOMING GAS PRESSURE. GAS COMPANY CHECKED, MAINTAINING A ST...
Show More

#Tunturi by Lynn Taylor on 2008-08-29 16:15

My treadmill got a E100 error code. The model is a J440 and although has some age - looks like new and was working like new. I had someone look at it here, and I am not confident in his ability. He also broke the switch (on/off) while looking at it. Can you help?

#Teijin Seiki by kim young gill on 2008-09-03 08:24

dear sirwe need repiar center near korea or japanhow can repiar pls show me the way(tel nomber )we will waiting reflythank you

#Teledyne Gurley by Roberta Jones on 2008-09-09 22:06

We need to order a new bottom gasket for our Cobb Sizing Tester. It measures approximately 5.25\" in diameter. Please provide pricing and payment options.

#Teca by Harold Mars on 2008-09-12 20:42

Do you have official manuals for the TECA EMG 4 channel premium plus.If so, what is the cost. Thank you.

#Tajima by m.abbas on 2008-09-21 17:03

we want a new tajima du-10driver box its ser-EH5404090000

#Taylor Electronics by Matt Sloan on 2008-09-26 03:16

After reading your comments about your sensor, I realized the magnet may be one of the culprits on this issue. Over time moisture accumulates in the magnet and may weaken the field to the induction coil. The induction coil in the Taylor anemometer heads are often weakened by time - temp changes etc....
Show More

#Tracor Westronics by William Jimenez on 2008-10-09 14:07

Hi, I need Manual and Technical information to chart register Westronics CCR 600, for calibrate the inputs and pens.Thank`s William Jimenez

#Takamine by Cal on 2008-10-09 22:31

I am inquiring about getting a replacement of the takamine tk 40 pre amp for an EG523SC I am looking at purchasing one with a possibly bad preamp I am just trying to find out how I can get a new preamp for it if I need to replace it, I can\'t find anyone selling the tk40 pre amp to replace it with.t...
Show More

#Teijin Seiki by zhou xiang on 2008-10-13 02:37

Hello!can you tell me what is the mean abuot the alarm code:E-109 about VIGOSERVO ARS30.thank you very very much!Zhou Xiang

#Teijin Seiki by Daniel on 2008-10-13 06:00

Anyone can help me on the error code \"E-109\"?Thx in advance!Daniel (Ji_shiao@hotmail.com)

#Thermal Dynamics by jim liccione on 2008-10-13 17:04

hello, we are a art museum plus art school. we have a thermal dynamics pax master 50. we are not able to control or use the gas pressure gauge. we do not have a part number. can you offer us some help. thank you

#Tracor Westronics by Kirk Wilson on 2008-11-16 23:54

Need some info about Tracor temperature monitoring system using model 7201 control unit and display. Have received a display unit, model 7201, with range module P/N 72-00022. This module is set up for rtd input, and I need to monitor Type K thermocouples. Can the range module from the old unit be sw...
Show More

#Taylor Electronics by Ray Orobona on 2008-11-17 16:09

I am looking for the anamometer cups of the above Taylor weatherscope. One of the cups broke in transit and I need a replacement for only the three cup assembly...not thr bottom sender..However,if I have to purchase the entire assembly I would gladly do so.Thank you,Ray Orobona

#Triangle Package by Ene Petre on 2008-11-29 00:00

Triangle Package 90wb6028ag seems to be malfunctioning and is not operational. Looking for a technician to diagnose and repair the issue

#Tdk by Sandeep on 2008-12-02 06:41

Dear Sir,I need urgently service manuls for TDK make radial insurtion machine, for madol no. VC-7A,VC-7B,VC-5B

#Techmalux by Christi Fogler on 2008-12-16 21:00

I have 2 lights needing repair. The glass tubes are gone and the bulbs need replacing. The unit is a Lumolux K/136 with an article # of 591-019-014. What type of turn around could I expect on the units? They are 120V / 60Hz 36w units.Christi

#Tracor Westronics by Jack Rogers on 2008-12-19 17:37

I have a tracor 7201, 7202 temp display and tracortemp chart recorder model MSESN 2280 options TJR 3650 0680That I would like repairedThanks jack

#Taylor Electronics by Sam on 2008-12-22 00:37

I have a Weatherscope by Taylor and the temperature probe is intact and works great, but the wind speed/direction thingie is gone. I have plentry of wire - nothing to connect it to.Can you help me find a new wind thingie?Sam

#Taylor Electronics by Leo McCarthy on 2009-01-11 08:28

Have an old? Taylor Weatherscope (cannot find a Model Number) made by Taylor Instrument Company Rochester USA. Has four separate gauges - Max/Min temperature, Barometer,wind speed and wind direction set in a solid wooden cabinet. Cable linking weathervane and wind speed indicator to instruments has ...
Show More

#Thermal Dynamics by mark decker on 2009-02-03 00:14

i have a service manual i have checked it out, toubleshooting points to main board i need estimate on repair of board

#Tunturi by Tto Roberts on 2009-02-05 16:11

Cannon get unit to start. Get error message that key is not inserted properly. Have key in and have changed the position and cannot get it to work. Was working and suddenly this happened.Thanks

#Teledyne Pines by Sue Taylor on 2009-02-13 12:46

I have a Teledyne Pines Single End Finishing Machine Model #660 that I am looking to buy replacement cutting tools for.I believe the part number is 8-660-086-042.Do you sell these?My machine is down and I\'m looking for these ASAP.Thank you,SueCell Phone 713.344.1327

#Teledyne Gurley by SeekersISeek on 2009-03-02 14:14

Hello Guys,Greetings. Introducing me.By the way, I am looking for book I ching translated by Kerson Huang. I cannot find those book anywhere. Do you know where I can find those? Thanks

#Teledyne Gurley by BookSeekers on 2009-03-03 12:20

Hello Guys,Greetings. Introducing me.By the way, I am looking for book I ching translated by Kerson Huang. I cannot find those book anywhere. Do you know where I can find those? Thanks

#Toyoda by AARON LESKO on 2009-03-07 21:31

WE HAVE 2 PCS. #MC1K-U050 AND 1 PC. #MC1K-U150 TOYODA ABSOLUTE POSITIONING CONTROLLERS. THEY ARE SURPLUS TO OUR NEEDS, BUT WE WOULD LIKE TO HAVE THEM REPAIRED SO THAT THEY ARE SALABLE. PLEASE QUOTE AND ALSO TELL US IF YOU COULD SELL THEM FOR US.

#Techmalux by GLEN TAYLOR on 2009-03-20 22:59

CAN YOU SUPPLY THE 70mm GLASS TUBE FOR A TECHMALUX LAMPLUMOLUX KE/224 591 049 024REGARDS,GLEN

#Techmalux by eduardo murga tome on 2009-04-18 16:14

se me ha estropeado una tarjeta electronica de un fluorescente estanca de 24 v corriente alterna necesitaria una de repuestola referencia que tiene la tarjeta es la siguiente485-000-04724 vac/18 wnr-4353

#Taylor Electronics by Bill Rizzo on 2009-04-30 02:01

Hi Jeff I, also have a Taylor Weatherscope. I\'m missing the Anemometer & Wind Direction unit. Can you PDF the Booklet that came with your unit? Thank you for your time. Bill of Magic Lantern Productions........Cheers !

#Teijin Seiki by duc quang on 2009-05-20 07:08

Can you please send me manual for vigo sevo ARS30

#Teijin Seiki by Nguyen Duc Quang on 2009-05-25 02:48

My company purchased Machine Centre style: MH4BN, serial no: 6AAA059. now it trouble ATC(auto tool charge), driver ( Vigo servo ARS30) loss parameter cause drop battery. Can you please send me manual for vigo servo ARS30.Nguyen Duc QuangEquipment departmentDiesel Song Cong Company.AD: Song Cong town...
Show More

#Tunturi by Rinus Heer on 2009-05-29 11:16

Hello,1) Do you have parts of the \"Tunturi ECB Workout Cycle F 400\"? 2) How much time do you need to deliver these at my home address? 3) Can I pick them up myself (where)?I need the following:Ref. nbr. 88 - Partnr. 263 1005 (one-way pulley)Ref. nbr. 85 - Partnr. 443 1002 (toothed belt)T...
Show More

#Takamine by Kurt Traynor on 2009-05-31 15:38

I am not receiving low end power when plugged into my amp. I get plenty of highs and after talking to someone from Tak they suggested it being the preamp assembly. So, I am looking for a replacement pickup assembly for my Tak fp360sc. If you have these in stock could you please send me a price.

#Taylor Electronics by Thomas J. Vogelpohl on 2009-06-14 16:35

Re; Taylor Model 3108A repair person at my home has severly damaged my external thermometer prob/bulb and has also severed the 5-strand ribbon cable which connects the wind-speed/direction unit to the main guage panel. Are there any replacement prob/bulbs and ribbon cables? Is there a 5-pin connecto...
Show More

#Teijin Seiki by javier on 2009-06-19 00:26

mi nombre es javier trabajo para una empresa de macanizados de presicion en una de las maquinas que atiendo tengo un SERVO VIGO ARS 30 el cual trabaja con un magacine y se para poniendo en el visor la siguiente incripsion E__9 nesesitaria si fuese posible me pasaran por mail un listado de los errore...
Show More

#Teijin Seiki by A. Enrique Soto on 2009-06-19 00:43

i need a list of code error or user manual of VIGOSERVO ARS 30.in the display appear the code E 09 ? and then cycle stop.if thi\'s possible i\'m greateful for delivery quick.thanks for your attention.

#Teijin Seiki by fabio vettori on 2009-06-29 08:37

list alarm tanks you for cooperation

#Teijin Seiki by JIM WILLIAMS on 2009-07-01 10:21

I AM LOOKING FOR MANUALS FOR THIS POWER SUPPLY AND MOTOR. WE HAVE ONE ON TWO OF OUR MACHINES BUT HAVE NO BREAK DOWN ON THE PARTS OTHER THAN THE ALARM LIST AND PARAMETER LIST. CAN YOU HELP?THANKS, JIM WILLIAMS

#Technifor by Steve Louie on 2009-07-01 14:09

Hello,I\'m Steve from Stanadyne Corp. here in Jacksonville NC. I have been in contact with Ms Donna about some items requiring repair. Namely a Technifor control box UN-200/e and now it\'s head Assembly Cn-200. I\'ve these items packed and ready to ship, but my supervisor has tasked with trying to f...
Show More

#Telind by Eduardo Palacios on 2009-07-13 19:08

saludos quiero programar un panel Cerberus Pyrotronic de Siemens MXL y no tengo el manual de programacion Podria alquien mandarmelo muchas gracias

#Techmalux by chip tipton on 2009-07-16 12:30

I have two ea l425-kbt015 bulb need repaired, how long does this usally take to repair ? regards,chip

#TC Electronic by Peter M Hayes on 2009-08-10 18:09

I have a TC-Electronics M-OneXL Dual Effects Signal Processor which emits \"white noise\" when any of the delay functions are selected.Is this something that you can repair. I have owned this unit for several years and it is well out of warranty repair status.Regards,P. M. Hayes

#Tunturi by Morris Yng on 2009-08-16 17:33

Have replaced batteries in the meter for F400 Exercise bike but display still not working when resetting or pedalling. However pulse sensor does work and registers on screen.

#Taylor Electronics by Deb McLaughlin on 2009-08-23 22:11

I have the same thing as Leo. My Dad was a weatherman for the County and I inherited this. I would love to use it but I know nothing about wiring. My cable linking the weatervane and wind speed is also cut. There is a very long wire with a metal rod on the end..not sure what that is for. Can anyone ...
Show More

#Teijin Seiki by ingouf on 2009-08-26 08:35

Hi,Is it possible to have a manual maintenance about a TELJI SEIKI drive model VIGO SERVO ARS60-15. Because i have an alarm E-14, or more explanation about this fault.thank you for your help.Best regardswilfrid ingouf

#Teijin Seiki by Antonio Perrotta on 2009-08-26 16:08

Dear SirsI need an ARS30 service manual Your help will be much appreciate.Many thanks Antonio Perrotta

#Toyo Denki by alex c muhitira on 2009-09-17 07:43

SIR WILL YOU PLEASE SEND FOR ME INSTRUCTION MANUAL FOR ABOVE DRIVE ,THE ONE WHICH WAS SUPPLIED WITH ,HAS LOST .IF YOU SEND EVEN CONNECTION INSTRUCTION IS GOOD IAM LOOKING FORWARD TO HIRE FROM YOU SOON YOURS IN TECH . ALEX C M

#Tunturi by Sara F. Shields on 2009-09-23 23:17

My Tunturi 900 StairStepper is not responding to the reset button and seems to be \"stuck\" in a cycle. I have tried unplugging the stepper and hitting the reset button. Please let me know what I can do?

#Transrex by Assemospepe on 2009-09-24 18:30

#2 sono 1,75 X 75 g

#Takamine by Mark Naro on 2009-10-11 13:22

I have a Takamine EG530 C with a TK4 N preamp pop out of the guitar hit the floor and the case is broken. Now I do not know if the preamp works?

#Taylor Electronics by Don Havener on 2009-10-29 13:31

I have a complete station that was purchased new in 1976 and never used. Is there a market for such an item?

#Tracor Westronics by David Barnes on 2009-11-12 18:01

Looking for Westronics MX-60 multiplexer manual. Electronic, PDF, copy, or paper, not particular. Willing to purchase if necessary.Thanks!!Dave Barnes, 509-373-3667

#Toyo Denki by sanshay8002 on 2009-11-27 07:38

Dear. SirPlease, i want to know how to operate vf 51 vector inverter.(3 phase motor speed controller). Please reply me from my email address contact me.Your Sincerely,Sanshay8002

#Teijin Seiki by BICOT Luc on 2009-12-10 17:10

Hi,I have an ARS15 and i need to put new parameters on it.I can read it but cannot write in the servo.Could you explain me the process to re-enter the parameters please !Thanks a lot and best regards.Luc BICOT

#Toyo Denki by Thai Binh le on 2010-01-10 07:54

I had 2 inverter toyodenki but I don`t have catalog . Please give me the catalog thank!

#Toyo Denki by Thai Binh le on 2010-01-11 01:24

Dir!I had 2 inverter Toyodenki VF5100Hg but I don`t have a catalog. Please give me a catalog of this inverterThank!

#Tajima by Lynn Waterhouse on 2010-01-19 18:50

What would you charge for a \"house call\" to Mebane, NC to take a look at my Tajima single head embroidery machine? Please email your reply...Thanks,Lynn

#Techmalux by Lucia Valdez on 2010-02-18 18:48

HelloPlease quote on pricing and availability on Techmalux Lomolux light # 591-019-014 for 1pc.Thank you,Regards,Lucia ValdezOMA IndustriesTel. 956-454-2599Fax 956-424-3969

#Toshiba by Ken Lemanski on 2010-03-12 17:23

Please provide pricing to repair a Toshiba V-10 touch screen.

#Toyo Denki by j.v ravichandran on 2010-03-16 19:47

dear sir, we are having 10 toyodenki inverters vf 64 all are not working out of order can you please help us sir thank you ravichandran 00914423727543 or 00919972411227

#Tunturi by Matt Kahle on 2010-03-20 21:03

I can\'t get my T-6 to turn on. We just moved a few weeks ago and I\'m getting around to setting it up, but I can\'t seem to get it to turn on. I\'ve verified the power cord and outlet are working, but not hte unit itself.Any ideas? Is it possible to get a replacement Alpha unit? An alpha 150, 200 o...
Show More

#Teijin Seiki by Peter Mueller on 2010-03-24 06:07

HiPlease let me know which of the two Units ARS60-15 or ARS135-25replaces AR60B120-BAO?Thanks a lot its very urgent.Regards Pete

#Teijin Seiki by Ajay Ghanwat on 2010-03-28 05:00

We have Mitsubushi HMC500 with VIGOSERVO ARS30 drive for ATC magazine.Plz support for the alarm diagnosis.

#Techmalux by Aldo G. Quilang on 2010-03-30 02:09

Specifcation;Lumolux-K220vac 36WArt. Nr. 960 036 301

#Teijin Seiki by Cody Stamper on 2010-04-01 15:03

I know this post is old, but I\'m looking for the AR60 manual also. The servo set with no power for quite some time, batteries went dead, and now all of the positions are off. The only manuals I have are in Japanese.

#Technifor by RAVINDRA KUMAR Singh on 2010-04-15 17:57

marking complete but marker does not move its home position and key feeding does not move for bitting and display shows overtime of marking unit

#Taylor by jeard on 2010-04-26 21:06

Hi I have a taylor weatherscope and i was wondering if you have the sensors for the wind speed and wind direction? can i send the unit to you and you give me a estimate?

#Teca by mark on 2010-05-01 00:50

we need a teca synergy stimulator repaired can you help?

#Tokuden by Prabha Shankar Choubey on 2010-05-13 03:38

Dear SirWe have around 20 DC drives of TOKUDEN, Model No.-UCP 4300FAVNPlease suggest us, from where should we have technical/maintanance support.Please also suggest us that from where should we purchase spare parts.

#Toyo Denki by John Grundeland on 2010-06-09 23:24

I need to find a commutator for a toyo denki motor. do you have these or know where I can find one?

#Texas Instruments by Tacklind on 2010-06-18 00:00

Subject Texas Instruments 500-2151 IssueHi there, I'm reaching out on behalf of someone in the shop who mentioned that the Texas Instruments 500-2151 unit isn't working. Thanks,

#Toyo Denki by tuan truong on 2010-06-22 03:31

please for me catalog toyo denki vf5100hg.thank you.

#Toyo Denki by KREBS BIOCHEMICALS & INDUSTRIES LIMITED on 2010-06-22 11:57

dear Sir,we have above model of VFD which is in trouble, kindly let us know the authorized service center near to us and send us their details.so that we can interact with themand get it rectified.thanks & regards

#Trumeter by mike shores on 2010-06-23 16:06

i have an 8822 1:100 encoder. the pins have been damaged but the unit itself is ok. can it be repaired?

#Takamine by Andy Walls on 2010-07-26 04:46

I have no audio or light with fresh battery in preamp. How much to fix this preamp

#Teca by Naseem shekhani, MD on 2010-07-27 20:49

I have a service contract with CARE FUSION which services TECA machines and I like to know if you do repairs and give service contract also.How does it work in your company and where about you are located in USA.Shekhani

#Tunturi by jon on 2010-08-07 19:13

we have a tunturi t90 when we switch it on says system check failed

#Teijin Seiki by ROLANDO on 2010-08-09 12:16

HI,Please quote forTeijin Seiki Servo Motor PN UPH 7S31-B10 1pcRegards,

#Toyo Denki by siraj on 2010-08-11 13:06

i required the manual VF5100HG PLZ EMAIL ME

#Toyo Denki by toto on 2010-08-20 09:03

please inform to me the VFC2001-P1 Board. i need to order that part. if the Board is ready please give me the Invoice. please help me. ASAPregardToto

#Toyo Denki by Wong Chee Chong on 2010-08-21 01:37

Dear sir,Good morning.Kindly send me a soft copy of the inverter type stated above.Your reply is very much appreciated.Best regards,ccwong

#Techmalux by Andreas Reiter on 2010-08-23 08:04

We are distributor of Techmalux.Do you still need this light??Best regards,Andreas ReiterFNF Industrietechnik GmbHHuelsmeyer Str.: 32D-49406 Eydelstedt / Germany Tel.: +49 (0) 5442-804798-0Fax: +49 (0) 5442-804798-20E-Mail: Info@FNF-Industrietechnik.com

#Toyo Denki by HEMESH PAL on 2010-08-23 11:38

I HAVE REQUIRE THE PROGRAMING/OPERATING USER\'S MANUAL OFTOYODENKI INVERTER TYPE : VF5140HG-75.SO PLEASE MAIL ME ON email id: hempal911@rediffmail.com

#Total Control by upendran.sd on 2010-08-30 13:10

I am a business customer inquiring about repair service for my Total Control Quick Panel Jr. The display on my unit is not functioning properly - it remains blank even when the device is powered on. As this unit is essential for our operations, I would like to know the estimated cost of replacing th...
Show More

#Toyo Denki by Tran Minh on 2010-09-19 05:44

Dir sirwe have a vf61v-2222-w1 inverter . now inverter had problem .when error inverter display error code it is En 2.we have not manual book so we can not repaired . Please help me clearify this problem.Thanks & best regards

#Teijin Seiki by Victor Gonzalez on 2010-09-23 17:42

we have at least 50 OKK machines & these machine used in motor\'s magazine a: VIGOSERVO ARS Model: ARS60-15 Power: 1.5 Kw AC input 200-300V 50/60 hz Out Put 10.6A max 31.8 A Teijin Seiki Co. Ltd. Serial: 800023

#Teijin Seiki by Victor Gonzalez on 2010-09-23 17:46

We have at least 50 OKK machines working with a Vigo servo ARS for motor magazine control. We have at least 3 of them damaged but now we have a machine down because we dont have any more spare.Could you possible to help me with a quotation and your best delivery time for a new one & also for rep...
Show More

#Teijin Seiki by Victor Gonzalez on 2010-09-23 17:53

We have at least 50 OKK cnc machine working with VIGOSERVO ARS as a motor magazine control, and now we have 3 damaged & we have a machine down because we dont have any more spares: Could you possible to send me a quotation and your best delivery time for a new one? Could you possible to help me ...
Show More

#Toyo Denki by aslam butt on 2010-10-07 08:22

toyo denki inverter is a sold and good

#Toyo Denki by Michael Thompson on 2010-10-12 14:30

My company is tryng to locate a replacement gating board for a Toyo Denki VF61S 7522 unit.The board is labeled \"GAC61-7522-P1\"Please feel free to contact me directly if you have any questions or if I can be of any service.Regards,Michael Thompson

#Toyo Denki by Barry Illing on 2010-10-13 08:31

Please supply manual for the above inverter.Thank you.

#Toyo Denki by NILEAYSH GHODAKE on 2010-10-31 08:40

Respected sir/madam,we have a komori sprintII 26 one color machine. presently we are facing some problem for the toyo denki drive VF61s 5r522.we request u to plz send us the quote for the service manual of the same.waiting for the same.thanksregardsNileaysh ghodake2181 sadashiv peth,tilak rd.pune 41...
Show More

#Teijin Seiki by MANUEL PARTIDA on 2010-11-12 00:30

LOOKING UNIT MODEL VIGOSERVO ARS60-15 AND IF YOU HAVE A MANUAL FOR THIS UNIT PLEASE

#Techmalux by Dan deMackiewicz on 2010-11-12 22:34

We have about 47 machines with KE/418G 24 V DC lights in them.We are having a problem with a light that goes out after several hours of operation.Is there a part we can buy to fix this?

#Toyo Denki by le tuan on 2010-11-15 09:48

can you help me? I need is user manual for VF61s series inverter.I speak English is not good!thanks

#Taylor Electronics by william gabriel on 2010-11-16 00:57

I would be extremely interested in your weaterscope if you still have it. I had one and would love to have a replacement for it.....Bill

#Taylor by Sharon Casey on 2010-11-18 14:40

We inherited the above ... wondering what we need to do to install and get it up and running. Please advise! Thank you!

#Toyo Denki by Ganesh on 2010-11-22 12:25

I am having Toyo Denki drive VF61s in my Mitsubishi Printing machine.Always saying UV or OV .Please help where to repairthisRegardsGanesh

#Toyo Denki by bobby on 2010-11-26 05:47

I think it has lost all its parameters if possible a manual would be great

#Teijin Seiki by Jay Carr on 2010-12-09 13:54

We have this code on our ARS15 :\"E-109\" and it is not listed in our manual.The controller to the machine Shizouka sv-4020 has this alarm message: \"no. 2063ATC servo alarmMagazine servo alarm\"I would like to know the problem and how i could trouble shoot it with out any extend...
Show More

#Thermal Dynamics by Abbas R Asariya on 2010-12-15 12:04

pak master 50XLpluse operation & repair manual

#Toyo Denki by Sarath Fernando on 2010-12-29 07:30

IT is a good quality inverter

#Techmalux by Gloria Pai on 2011-01-05 08:53

Dear Sir,I need one set of LUMOLUX K2/026, 26W ohne VG, Art number 591-042-001, and one piece of lamp 26W.Could you please give me your quotation. Thank you.With best regards,Gloria PaiSun Shine Gear Co., Ltd100, Chiu Se Lane, Pei Tun District 406, Taichung, Taiwan

#Toyo Denki by zaheer hussain on 2011-01-20 04:49

inverter model ed64sp-16044-w2 igbt module cm-300dy-24h faulty

#Toyo Denki by Madras Safire Lithographers on 2011-01-22 13:37

Dear Sir, We from Madras Safire Lithographers,Sivakasi. We using your ( VF61v 3722 ) model . (Lithrone 40P L-440P. SN116) . Here some technical problem in this machine. So we need Invertor English Operation Manual.. So Please send as Quick as Possible... our mail id is mention above itself . We look...
Show More

#Transformator-Teknik by STACY BARRETT on 2011-01-24 17:41

I see that you repair Transformator-Teknik products, however can you purchase new? If not, do you know of someone here in the States that is a distributor? I have a customer looking for the following transformer, new and possibly for Next Day Air.Transformer: Transformator-Teknik1-FAS ISOLERTRANSMOR...
Show More

#Toyo Denki by Enrique Marín on 2011-01-28 18:54

I need the VF61 inverter manual to help diagnose faults

#Taylor Electronics by John Tucker on 2011-02-04 04:07

Hello, Is it possible to purshase a weatherscope or the entire roof mount with the speed and wind direction?Best Regards,John Tucker

#Thermal Dynamics by T. Carr on 2011-02-15 19:00

will not fire only blows air

#Taylor Electronics by Julian on 2011-02-16 00:03

Do you sell, or tell me where I can get parts.Thank you

#Toyo Denki by mousa abed on 2011-02-17 13:13

I am having Toyo Denki drive VF61s 7R522 in my Komori Printing machine. Presently I am facing problem DSP ROM EROOSo i can gat a new rom vf61s 03-BIL

#Taylor Electronics by Tom Boscarino on 2011-03-11 19:26

I have a NOS Weatherscope 3108 new in the original box. Has never been unpacked or installed.I would like to sell the whole unit. Will take offers.Tom

#Taylor Electronics by john kolodzie on 2011-03-21 18:04

need to replace entire speed cup assembly that fits on shaft.please, advise.

#Therm-L-Tech by Mike Weber on 2011-03-25 17:58

I am looking for a replacement push button in handle of door. Please contact me. I assume I need to drill out rivets on handle to replace button.

#Taylor Electronics by TomR on 2011-03-28 01:31

Hi:I am trying to repair/replace my Weatherscope but I do not know what a 3108 looks like. Mine is in a chery case and has 4 guages; Barometer, Thermostat, Wind Speed, and Wind Direction.Thanks - TomR

#Taylor Electronics by TomR on 2011-03-30 13:47

How do I contact you to discuss purchase? I am interestedthanks - TomR - 215.589.0686

#Taylor Electronics by Gerald Wilgus on 2011-04-06 19:35

Do you have a speed cup for a 3108C assembly or do I have to buy the total roof replacement?Thank you.

#Toyo Denki by sajid on 2011-05-01 10:20

Dear Sir,Kindly send VF64-222-W1 instruction manual and connection details to us Kind Regardssajid

#Toyo Denki by farag on 2011-05-09 16:56

PLEASE SEND ME THE MANUAL OF vf61-02-B7 vfc61-P1-qB5THANKS AND REGARDS

#Therm-L-Tech by Steven Cole on 2011-05-15 12:55

Peter, I just wanted to say hello, I was the original owner of Therm-L-Tec Systems. Just wanted to let you know that we are in the planning stage of getting back in to business.

#Toyo Denki by FARAG on 2011-05-15 17:27

I need the VF61 inverter manual to help diagnose faults

#Toyo Denki by Andrey Evdokimov on 2011-05-18 09:11

Accidentally found your correspondence. We are looking for Toyo Denki inverter, model VF61S 7R522, used or new for our printing machine, on the off-chance, but may be you can find and provide us with this inverter or may be with new model of this, i.e. VF66B 7R522If yes, we can pick up in in USA too...
Show More

#Trine by Russell Owens on 2011-05-22 00:00

Trine 6201 isn't powering on. Need immediate repair assistance.

#Teledyne Gurley by Van Brahana on 2011-06-01 18:01

We have an old model 1100 flow velocity indicator (Serial No. AE0271) that we use for teaching, and just recently it is not registering revolutions. Do you still service these, and if so, what is your charge for problem assessment and repair?

#Toyo Denki by MOTORCONTROL on 2011-06-12 07:09

MANUAL DRIVE

#Toyo Denki by eko juhan on 2011-06-16 02:37

i want manualbook toyo denki type VF61S, and price list card control type vf61v-p1. thank before

#Toyo Denki by eko juhan on 2011-06-16 02:37

i want manualbook toyo denki type VF61S, and price list card control type vf61v-p1. thank before

#Toyo Denki by phu on 2011-06-17 10:57

HELLO My company have got a mitsubishi offset printing machine.I have problem with inverter vf61s 2222. control main motor .error display on display panel of inverter:error communication.I need manual for check it thank a lot

#Toyo Denki by sathish on 2011-06-20 07:09

need toyo denki ed64sp parameter setting.

#Toyo Denki by hoa van on 2011-07-01 06:34

Dear sirwe have a vf61s-7r522 inverter. now inverter had problem .when error inverter display error code it is oV.we have not manual book so we can not repaired . Please help me.Thanks & best regards

#Toyo Denki by LIM on 2011-07-07 06:06

Need to repair my machine!

#Toyo Denki by muhammad nadeem on 2011-07-13 11:24

pls send me by email. user manual vf 61

#Teledyne Gurley by Don Jensen on 2011-07-16 19:11

I am looking for a manual for my Pathfinder 5 DRO model 8770-2 S/N 26-7-0478. Also a source for renewal parts. I know I need to replace the encoder lamp on one axis.

#Toyo Denki by wilbert on 2011-07-25 16:55

my drive VF 61 is same pro so pls sent manuel

#Toyo Denki by Juan Carlos Suarez on 2011-08-03 19:43

Dear Sir, Kindly send VF64-222-W1 instructions and connection details with us Preferably in Spanish or English thanks and best regards Juan Carlos Suarez

#Teijin Seiki by Guersemdriree on 2011-08-05 13:37

lo que yo queria, gracias

#Toyo Denki by bethel graphics on 2011-08-06 06:21

Dear sir, we have one komori S II 28 106, Sprint one color printing machine,model-1994. When we switch on the main press, the inverter shows loc . So kindly tell us the meaning of loc, kindly send full details and trouble shoot diagrams, inverter details, we are waiting for your honorable reply, sti...
Show More

#Teijin Seiki by manoj sharma on 2011-08-18 17:22

PLEASE HELP ME ALARM DRIVE E 101

#Toyo Denki by Bui Duc Hoa on 2011-08-24 10:55

We are CDT Co.,Ltd in Hanoi Vietnam profesional ofice and industry equipments trade and repairs.Now we want the Catalog of VF61S 7R522 TOYO DENKI Inverter ,for repairs KOMORI SPRINT SII-226 Printing machine in VietnamPlease give me the Catalog of VF61SThank you very muchBest RegardBui Duc HoaTechnic...
Show More

#Teijin Seiki by KETAN GAJJAR on 2011-08-24 16:16

Dear Sir,We are lloking for above servo mannual.Pl. send me the same if you have.True regards,Ketan Gajjar

#Teijin Seiki by narinder singh on 2011-08-30 14:49

Dear Sir/Madam We Have machine teijin seiki Which has drive named ARS-30 vigo servo is getting problem of Alarm E - 101 . Kindly Give us the Solution of that alarm as well as send us the manuals.

#Toyo Denki by David J Langley on 2011-08-30 23:29

Please !

#Tsudakoma by Andy Smith on 2011-09-19 13:44

We are an Auto parts company.We have 4 of these units in operation, no back-up.Looking for a back-up unit.I am told the control card is no longer avalible.

#Teijin Seiki by Audre Chay on 2011-09-23 10:44

Dear, i am not sure whether the servo unit is faulty or not.the digital no. only show no. 5please consult.thanks.

#Taylor by Frank Giannone on 2011-09-26 03:49

can i buy a replacement sending unit for the speed and wind direction for an old Taylor weatherscope.thanks,Frank

#Toyo Denki by B.GOVINDARAO on 2011-10-10 05:25

very good drive

#Tokyo Elmec Corp by eliyanto on 2011-10-13 00:00

Subject Urgent Rotary Indexer Equipment DownHello,We are experiencing issues with our Tokyo Elmec Corp. 2 Rotary Indexer. The equipment is displaying error code E123 and is not able to move the indexing mechanism. This is impacting our production line and we need immediate assistance to resolve this...
Show More

#Toyo Denki by indra on 2011-10-26 12:49

Dear Sir,Could you please help me to get the manual isntruction in PDF file in English Version for the TOYODENKI INVERTER type VF5140HGRegards,INDRA

#Trutzschler by RANGARAJ on 2011-11-08 13:12

REF YOUR ENQ BY SMS ON 7-11-11MR. MURUGESAN CELL : 09364228322UDAMALPETWE OFFER TRUTZCHLER CARDING PCB\'S [USED] TRUTZSCHLER CARDING USED PCB\'SPR-E-9 491-89.231.000 - 1NO @ 1500-00 EACCM N P1-9 491 .88.230.000 - 1NO @ 1500-00 EACCM U E 1 9-491 91.230.000 - 1NO @ 1500-00 EACCM IR1-9 491 -90.230.000 ...
Show More

#Tajima by javier acosta on 2011-11-14 15:52

good morning.I need urg board electronic for tajima.refe ED5101030000.new or used perfect .thanks a lot..or do you have electronic partsjavier

#Teijin Seiki by Nguyen dang van on 2011-11-24 08:41

My company purchased Machine Centre style: Okuma, serial no: milac-852v. now it trouble ATC(auto tool charge), driver ( Vigo servo ARS30) loss parameter cause drop battery. Can you please send me manual for vigo servo ARS30-A.Nguyen Dang VanMold & Die Deparment ManagerVIETNAM STANLEY ELECTRIC CO...
Show More

#Toyo Denki by vasanth on 2011-11-25 13:18

we want toyo denki inverter vf51hgs operating manual

#Tristem Electronics by sukhbir singh on 2011-11-28 08:05

Pl give your Indian Agent details or your details where we can send our enquiry

#Toyo Denki by vasanth on 2011-11-30 04:14

Toyo Denki VF51HGS Inverter Manual

#Toyo Denki by Vasanthkumar on 2011-11-30 04:17

fault cs2 is indecating

#Toyo Denki by awadhi mrutu on 2011-12-22 16:00

Hi! Sir I have problem with the invertor of my pinting press with the following specification:Yoyo Denki inverter Type VF61s-7R522-W1APPL: QB1INPUT 3Q 200V-230 50/60HZOUTPUT 200V 7.5KW 32.5 MAX(180 5.5KW 32.5A MAX). ALSO INCLUDE WITH ITS INSTALLATION MANUALI NEED THIS UNIT VERY URGENT SO KINDLY SEND...
Show More

#Taylor Electronics by Tom Whelan on 2011-12-31 19:56

Hello:I have acquired a Weatherscope by Taylor (wooden box with 4 gauges) Brand new, never used. It has all the parts except the wind vane for direction.Do you sell them? if not, I can\'t seem to find a picture of it so I can fabricate one for this unit.Great looking older unit, would love to get it...
Show More

#Toyo Denki by nasir on 2012-01-03 21:08

Required programming manual for parameter setting please asess me to download the programming manualregards,

#Toyo Denki by nasir on 2012-01-03 21:08

Required programming manual for parameter setting please asess me to download the programming manualregards,

#Toyo Denki by Shaliah AM on 2012-01-12 19:36

pls sent thrugh by mail

#Toyo Denki by Shaliah AM on 2012-01-12 19:40

we need VF61V 2222 connection and instrection Programme Manual pls saggestion for without (optcoder )option sent thrugh by mail.Best regardsA.M. Shaliah

#Toyo Denki by Mansour Sow on 2012-02-02 20:52

Hi I would like to get the instruction manual for this inverter VF 61.Thanks in advanceRegards

#Tasc Drives by Wesley Ballantine on 2012-02-03 12:42

We have a Tasc Unit Variable Speed Drive driving a bitumen pump on a Braham Millar asphalt plant. the plant runs most days for 1 to 2 hrs. we are finding that on start up the unit is slipping and not enough bitumen is delivered to the plant causing the plant to shut down. when it gets going it keeps...
Show More

#Toyo Denki by satheesh hr on 2012-02-03 17:43

Dear sirWe have one toyo denki vf51hgs and the display shows C52. Please send any manual for detailed fault explanation and programming.Thankssatheesh.H.R

#Toyo Denki by ngoc on 2012-02-08 06:47

please sen me VF5140HG-75

#Toyo Denki by sergio sanchez on 2012-02-14 14:14

I need the manual operation vf61v 2222 thanks I am at your servicesergio sanchez

#Toyo Denki by smijo varghese on 2012-02-28 06:02

Dear Sir We are using your VF61s 22 kw drive and currently we are facing with trip message of \"START FAILURE \" after given the start/jog command from console panel/terminals.Please suggest me what will be the reasons for tripping the drive/ or same drive is repairable or not.RegardsSmijo...
Show More

#Toyo Denki by Mitul Ravat on 2012-02-28 06:23

Urgent requirement of Manual of VF61V2222 make of TOYODENKI.

#Toyo Denki by shailesh patel on 2012-02-28 10:09

we have VF64V-2222-W1 drive but no any operating manual so please send to soft copy manual

#Toyo Denki by muhammad on 2012-03-28 15:01

pls send me book thanks and very good.

#Teijin Seiki by hiteshrana on 2012-04-09 09:28

yes i need it manual for my m/c .please sned this on my mail.My cell no.09540638378

#Toyo Denki by NAKUL on 2012-04-29 18:17

hello sir i want repair (vf 61 v 2222) drive please send me coatation for drive repair,

#Teijin Seiki by Steffan on 2012-05-10 23:03

Hi NguyenDid you ever find a manual for the ARS30? We are in the same situation and need a manual to get our machine up running again.Any responce would be much appreciated.Thank you.RegardsSteffan

#Techmalux by wayne sanders on 2012-05-24 20:05

We have been using Techmalux, Lumolux lights. A lot of failures in electronic base. Are they worth repairing? Rough cost? I have about 8 bases #410-000-022 from light #K2E/413 ( #591-026-010 ). I thought it may be fuse. Fixed one.

#Thermal Dynamics by Michael on 2012-05-30 11:51

I have an older oak master 50 the collar that screws on to the machine that holds the cables to the pak master snapped i\'n half is there any were you no of that I can retrieve this part?Thanks michael

#Toyo Denki by Fred Andrews on 2012-06-08 12:36

We have a vessel agitator running on dual drives due to the 133kw poer required. The drives are stopping then starting without any indication of why. No alarms or faults shown. Just stop and start for no reasong. These drives are over 20 years old. Could the transistors be going? Any ideas?

#Toyo Denki by asgar on 2012-06-11 06:05

dear sir/mam,i have 4pcs of toyodenky inverters for repair. i need its user manual (english) .i will bee very thankful to you if u provide me the manual book.thanks n best regards.

#Toyo Denki by Richard on 2012-06-13 09:35

Dear Sir/MadamHave a nice day.Firstly I would like to introduce our company.Our company is one of the largest cosmetic manufacturing companies in Myanmar,namely Shwe Pyi Nann Co;Ltd.Now we would like to buy Toyo Denki inverter from your company.In this case please let me know the price quotation of ...
Show More

#Toyo Denki by miha on 2012-06-14 06:56

Hello. we have a printing machine KOMORI LS 440 we need a parameter list for inverter VF 61V model 3722.

#Toyo Denki by Al Rawnak printing co. on 2012-06-23 18:35

May we request for a diagram for this inverter. Thank you

#Toyo Denki by azhar on 2012-07-10 19:52

plz vf5100hg munwal

#Toyo Denki by azhar on 2012-07-12 14:30

plz me munwal vf 500 hg 55kw

#Toyo Denki by imran on 2012-07-12 16:37

plz send me toyodenki vf5100hgthanks

#Takamine by Bill Sigle on 2012-07-15 18:38

I have a EG544SC-4C with a TK40 preamp that Does not operate properly. It will play through an amp when in the tuner mode, which it is not supose to, but with the tuner turned off its only static or nothing at all. I have removed it from the guitar and there is no visible exterior damage.I would lik...
Show More

#Toyo Denki by vv on 2012-07-16 09:30

vf61 invereter user manual

#Thermal Dynamics by Jerome Karsonovich on 2012-07-29 17:51

Can you give me the value of the two large resistors on the main pcb located in R165 & R166 locations. They appear to be around 5 watt in size.

#Toyo Denki by Avedis Kazandjian on 2012-07-30 13:44

VF5100HG manual to maintaind driver

#Toyo Denki by kwangyong, ham on 2012-07-31 05:53

The type of inverter : vf61 v 3722Equipped at offset press Lithrone 40P L-440PDear sir, Last couple days our press machine trouble with inverter as above mentionedSo I need to have english manual, please send as fast as possible, looking for your kind reply soon.Best regards,saint2662@yahoo.co.kr82-...
Show More

#Toyo Denki by Armando Ríos Garro on 2012-08-10 19:16

Por favor necesito me hagan llegar el manual de repración del varidor trifasico VF61 2244

#Toyo Denki by kedar patil on 2012-08-12 07:01

we need the parameter setting how to operate

#Toyo Denki by Patil on 2012-08-23 06:17

Urgent Requirement

#Toyo Denki by M HASSAN on 2012-08-28 16:55

Required programming manual for parameter setting please asess me to download the programming manualregards,

#Toyo Denki by nelson on 2012-09-10 03:04

Toyo Denki vf61v 3722 220vac

#Toyo Denki by Jotty George on 2012-09-11 05:53

SIR WILL YOU PLEASE SEND FOR ME INSTRUCTION MANUAL FOR ABOVE DRIVE ,THE ONE WHICH WAS SUPPLIED WITH ,HAS LOST .IF YOU SEND EVEN CONNECTION INSTRUCTION IS GOOD Expecting a sudden action

#Toyo Denki by Jotty George on 2012-09-11 06:14

Dear Sir,We have a printing Komori Machine. in that main motor drive got repeired.To rectify that we need manual of the above.please mail me back the mannual.hope you will mail me soonRegardsJotty george

#Teknor Microsystems by John Kowalkowski on 2012-09-18 04:51

Hi,We are a US DOD facility that has older White Carousels with the IPC controllers.They have a TEKNOR MICROSYSTEMS circuit card:MODEL:TEK-AT1 PROD:T700_6-16_WAAre these something that your company can repair? What would the price be? Shipping back/forth is easiest via USPS Priority Mail Flat Rate b...
Show More

#Thermal Dynamics by Dutch Higdon on 2012-09-23 03:08

I am looking for a service manual book for Pak Master Thermal Dynamics 50XL Plus Air Plasma Cutting System. This number is was on the main plate: EN50192; Volts 208/230; Manufacture Date: 228/00.This is the only informatin I found on the equipment. If you have a video, I am interested of purchasing ...
Show More

#Taylor Electronics by justin on 2012-10-07 00:07

I have a new weatherscope still in box. Call and make an offer 603 608 9670

#Toyo Denki by MUHAMMad WAHEED on 2012-10-17 07:45

i am user inverter

#Toyo Denki by kokyaw on 2012-11-05 04:56

My driver stop with over speed after starting a few second.i have no manual book so i want to need manual .please send me it...

#Toyo Machinery by Randall S. Kuyken @Atlas ind. on 2012-11-09 16:40

Thi servo amp will give us 11 alarms

#Toyo Denki by waheed on 2012-11-13 11:31

please reqaird instruction manual

#Toyo Denki by imran hussain on 2012-11-14 06:49

pleas sen me manual vf5100hgthanks

#Takamine by Paul Aubry on 2012-11-18 14:45

I try to know if it is possible to repair or buy a new takamine guitar premp , Graph-Ex preamp???

#Toyo Denki by yusron on 2012-11-21 03:47

Dear sir,Please send manual book inverter toyo denki VF5100HG to my email : yusron1985@gmail.com.Because my inverter trouble :\"LU3\"ThanksBest regardYusron

#Teijin Seiki by Heah Tai San on 2012-11-30 02:39

Dear Sir/Madam, We Best Solution Machine Tools Dealing In Metal Working Machinery And Service In Malaysia, We Face A Problem In Repairing The Magazine For Okuma&Howa Millac 511V. The Magazine Can Not Stop, Kindly Can You Tell Us How To Solve This Problem, What Is The Parameter No. For Magazine O...
Show More

#Takamine by Widdy Loo on 2012-12-01 05:22

My Takamine Electric Acoustic with the Takamine ACCUR Acoustic EQ has about half the volume it should. Battery is good, maybe one of those things in there lost there value and needs to be changed. Is it possible to repair? If so can I just send the onboard unit with out the guitar and pickup? Your r...
Show More

#Toyo Denki by parthajit samanta on 2012-12-15 07:37

Dear Sir / Madam Please you help me for manual & Software . I request you If you help with send me software with manual.

#Toyo Denki by Tarak Mondal on 2012-12-15 09:03

pl send me manual for below model,TOYO DENKIMODEL: VF61V-2222-W1

#Telind by ali niazmand on 2013-01-13 12:04

I buy the machine \' GARZATRICE\' Mod. PEGASO-X5/VE from italy iwant to have its user & repair manualwho can help methanks

#Toyo Denki by nguyễn đình thắng on 2013-01-16 15:54

Dear.....!I\'m using VF61S 7522 Inverter products, in the process of using an error has occurred. I would like a manual of the product VF61S 7522 Inverter. Can you please give me? thank you so much!

#Toyo Denki by yopi hermawan on 2013-01-30 12:02

Please sent user manual program VF5100HGWee need reprogram my inverter

#Toyo Denki by Raúl Londoño M. on 2013-03-25 01:32

Good evening. I have this drive in my Komori printing machine. I don\'t have any manual. I want to know what \"uU\" means. ¿Could you send me the list of the error codes?Thank you.

#Teijin Seiki by Gianni Campanello on 2013-04-10 09:44

Good morning,My name is Gianni Campanellol,I have a vigoservo, with display E14.I downloaded manuals from the internet, but can not find information E14.I ask for help for problem solution.1000 Thank you.

#Technotrans by luis rodriguez on 2013-04-20 05:05

I have a drawback in the control with no lights fkc 2000 water pump or compressorthank you for your information awaiting your response

#Toyo Denki by ashok solanki on 2013-04-25 09:14

dear sir,we need manual for ac servo drive.vf61-i,3r722,

#Technotrans by jon on 2013-04-26 18:22

I need a Technotrans screen replaced replacement part # 526535-000 elo touch screen

#Thermal Dynamics by Marvin Alfred on 2013-05-21 14:54

Hello There,I was using the above model a couple of days ago when it quit cutting for a moment and then started working again. This happened about three times and on the forth time the air was coming out but just quit cutting altogether.Are there things I can check before having it repaired to make ...
Show More

#Teijin Seiki by LEEGIN on 2013-06-18 15:43

alarm details vigo servo ARS6O E14 E3 E4 Pls details for alarm and solve it

#Teijin Seiki by leegin on 2013-06-18 15:51

i need it manual for vigo servo ars60 .please sned this on my mail

#Toyo Denki by sajid on 2013-06-25 18:42

Dear ,We are getting some Alarm On VF64S- 7R522 Showing MPU Ram Error . please send your advice and if you can send complete manual for Above mentioned Inverter please send as earliest possible , and also please send your company detailed information to my mail soon Waiting for your earliest replyRe...
Show More

#Toyo Denki by Muhammad Saiful Alam Sarker on 2013-06-27 09:27

Dear sir,Please give me user manual in English of the Inverter Vf61-i 3R722 soft copy. Best RegardsSaiful

#Takamine by Nathan Slaten on 2013-07-05 19:09

This preamp was missing a pickup that plugged in behind the preamp with a RCA jack. It did however contain with it a 1/8th inch male to 1/4 inch female pigtail for the guitars input. I was curious as to where I might be able to find a wiring diagram for this and another Takamine Pre-amp I am current...
Show More

#Tajima by Rod Chandler on 2013-07-13 23:49

The drive board on your Tajima CX5609030000 is malfunctioning, causing the unit to display errors or be unresponsive during operation. To solve this issue, it is recommended to replace the drive board components. The estimated cost for this repair depends on the extent of the damage and the overall ...
Show More

#Toyo Denki by ANGE Benjamin on 2013-10-01 19:36

Dear sir,We are in need of TOYODENKI VF16V-2222 User Operating manual.Can you please provide as son as possible.Thank you in anticipation.Regards

#Teijin Seiki by paul myers on 2013-10-08 00:00

Subject Teijin Seiki ARS15-06 Vigoservo Repair InquiryDear Repair Shop,I am reaching out on behalf of a client who is experiencing issues with their Teijin Seiki ARS15-06 Vigoservo (part number ARS15-06). The client has reported a problem with the functioning of the servo system and is in need of re...
Show More

#Toyo Denki by kiran kumar on 2013-10-17 05:48

required of vf61v 2222 drive operation manual.

#Trumpf by Jason Bullins on 2013-10-17 13:56

We are currently have issues with a Blum Power Supply Part#: SNT60200 that is installed on our Trumpf Laser. Is it possible that you guys can sell me another one of these.

#Teijin Seiki by Khoa Tran on 2013-11-22 15:51

Hello,I have Vigo Servo ARS15-06 now It alarm E-109 I have not the Manual Please help me for alarm E-109.Thank you very much.Khoa Tran.

#Tokyo Seimitsu by Bob Culvey on 2014-01-14 19:04

Good agternoon, We have a Handysurf E-30A that with the AC Adapter plugged in to the outlet and the Handysurf, when pressing measure it displays \"No Battery\". Would this be an AC Adapter issue? Also what would be cost of a Calibration for this Handysurf?Thank you for your time Bob

#Toyo Denki by sajid on 2014-01-21 11:51

Dear Sir,Kindly send us VF61S Complete manual , please send your price for manuals

#Toyo Denki by Karna Prayogi on 2014-03-15 02:43

I had trouble with toyodenki VF5100HG but I have not a manual bookplease sen me manual vf5100hgThank

#Toyo Denki by Ivor Wee on 2014-04-14 02:32

My machine Komori L528 , Inverter always indicate overload.Where do I have to send for repair?.Best Regards

#Toyo Denki by MAHES GAMINI PERERA on 2014-06-27 16:50

Dear sir Komori Motor giving problem, while it is running.Er re code is IOC I want to correct it,but i don\'t have manual. Thanks Mahes.

#Toyo Denki by arun on 2014-07-01 16:57

Dear sir I have a problem in toyo denki drive in which i am having the error c53 is it able to repair the unit can u tell me the price

#Toyo Denki by S. Mitra on 2014-08-23 12:42

Dear Sir,We have a drive of your company. It has come with machine. We don\'t have your manual. So if any problem comes then no repair possible.Recently, we observed, during running of main motor suddenly stopped and it shows high voltage. Please help us to solve our problem and instruct us what to ...
Show More

#Toyo Denki by Reny on 2014-08-26 07:43

Can we also request to have a copy of toyo denki vf61v2222 thank you

#Toyo Denki by nguyen kim son on 2014-09-25 03:57

I need ducument of vf5100h, can you help me. Thank.

#Tokyo Electronics by Gert Smith on 2015-01-09 00:00

Got a Tokyo Electronics 1D81-000098-C9 audio board failure. Need immediate replacement. Heading to the next machine now.

#Toyo Denki by Victor Gonzales Casas on 2015-03-22 20:25

Messrs. ToyoDenki please i need the drive VF61 2244. We appreciate manual if I send it to my email. Also need to buy 2 more. atte. Victor Gonzales Casas. Peru Lima.

#Taylor Electronics by don keating on 2015-05-17 19:29

Hello. Did this unit ever sell? I\'m interested!

#Toyo Denki by William Sia Jr. on 2015-06-11 06:20

I\'m currently using toyo denki inverter, I always experience stoppage during production run. the screen reading says \"over voltage\". is there a way to remedy this problem? can you help me adjust the input voltage? Thank youWilliam Sia Jr.

#Tracor Westronics by Chris Kenney on 2015-07-05 13:58

I am looking for a SBAG - 202Line Max 500VContact Cap. DC 30V 2A, AC 125V 2A, AC 250 1AAux power supply: AC 170V 270V 50/60 HZCan you provide price and delivery time.RegardsChris Kenney

#Takamine by Val Gladden on 2015-07-08 15:14

I have a 2001 graph ex pre-amp and recently the volume pot has been giving me problems. I\'ve tried cleaning it but it is so sealed up that it is hard to get any spray in there. I even drilled a small hole in the plastic housing and got the same result. I think if I replace it, my problem will be so...
Show More

#Teijin Seiki by John Robinson on 2015-10-01 17:31

Hello, we are having an issue with our vigo servo. We are getting an E101 alarm. We have found out that this alarm means a IPM alarm but we are unsure as to what that actually means.You can reach me by phone or email listed above.Thanks, John.

#Toyo Denki by areeb on 2015-11-26 07:41

Dear Kindly I require manual as i have the same inverter, i need to program

#Toyo Denki by alfonso toledo on 2016-03-30 00:51

it display error on inverse intelligence IGBTBF61TS

#Topedm by FRANCISCO GUERRERO GRO on 2016-04-26 00:00

Subject Topedm MCP001-AA IssueHello, I was informed that the Topedm MCP001-AA unit is not functioning properly. It's showing an unknown issue and needs attention. Can you please investigate further? Thank you.

#Teijin Seiki by Orlando Jones on 2016-06-21 19:14

I am trying to get information about an E-109 code for a Vigoservo ARS30

#Toyo Denki by Ravindran.A on 2016-07-29 06:51

We are using touodenki drives on our printing press made by Tks jspan

#Toyo Denki by Ravindran.A on 2016-07-29 06:51

We are using touodenki drives on our printing press made by Tks jspan

#Teijin Seiki by SUNG MO KANG on 2016-08-30 06:42

Hi,We have some technical problem about VIGO SERVO ARS60-15. I have an alarm \"E-3\", when tools are changing. If you have any solutions or manual book, please help me to solve this problem. In addition, if you have manual book or a file of the manual, i might be able to buy it.Thank you f...
Show More

#Trcor Westronics by KEVIN DRESCH on 2016-11-19 10:44

: Our industrial unit has been experiencing recurring issues with the conveyor system in recent weeks. The system is supposed to transport raw materials from the receiving dock to the production line, but it's consistently jamming and halting operations. This results in significant production delays...
Show More

#Teijin Seiki by ARUN UPANAL on 2016-12-16 14:36

list of alarm 1. E101 & E105 2. E2

#Toyo Denki by Imran Raza on 2017-01-02 07:22

Dear Sir,Please quote the competitive rates of the following with Literature: IGBT Firing Card Model: GAC2001.Early reply is requested please.Kind RegardsImran Raza

#Takamine by Richard Dunn on 2017-01-14 16:43

I have a EG330C with what is, I believe, a bad preamp. It uses the N4B preamp with the RCA plug input and a 3.5MM output. There is no output from the unit. Have switched the 9v and the batt test light does come on. Is there a way to test this? Can it be repaired? I realize that it could be the picku...
Show More

#Toyo Denki by Dadang Syarif Hidayat on 2017-03-07 02:11

may i see for manual book inverter toyo denki VF61V-3722?

#Toyo by PAULO DE OLIVEIRA BRASILEIRO E on 2017-03-11 02:33

Need electrical diagram for Toyo st50 disc pro

#Teijin Seiki by Conrado Estrada on 2017-04-03 23:12

Anyone can help me on the error code "E-116"?

#Thermltech by Lee Morris on 2017-04-24 20:52

: Our industrial unit, a [unit type] used for [brief description of unit's function], has been experiencing recurring issues with the [specific part of unit]. Its causing problems with [describe issue's impact on functionality - e.g., output is not consistent, production speed is hindered]. As it st...
Show More

#Toyo Denki by Kasimo on 2017-04-25 05:33

Manual for inverter VF5140HG-150

#Teijin Seiki by Tin Sarmiento on 2017-05-24 09:27

Dear Sir/Ma'am,Good day ! I would like to request a quotation for the item below. PLEASE QUOTE:1pc. SERVO MOTORPart no. / Model no. / Stock no. : UP H7S-11-BIOBrand: TEIJIN SEIKI/NabtescoFor Equip/ Tool: TSOP Deflash/Dambar Progressive Tool HANMIFor Equipment serial no. : TSP-2582-2002-- Notes:*Weig...
Show More

#Taylor Electronics by Brian Heneghan on 2017-06-27 20:24

I own an original Taylor Windscope Wind Vane w/ original "Wind Direction" indicator.After 30 years of service it needs to have the "distributor " unit either replaced or rebuilt ( currently does not show direction NE thru SE quadrant.What can you do to help ?

#Teijin Seiki by li yanming yanming on 2017-08-10 03:15

Hello.Excuse me?We are an electrical and mechanical engineering company in china.We need to buy the following products:We can accept: refurbishment, alternative.V160SERVD ARS30-10Quantity; 1Would you please make us a favorable offer?And provide accurate information:Price, weight, delivery date, info...
Show More

#Toyo Denki by Myo Aung on 2017-09-14 01:24

i need user manual please send me

#Teijin Seiki by JR TECHNO PRODUCTS on 2017-10-25 07:13

WE HAVE PURCHASED OKUMA & HOWA MILLAC 550H FITTED WITH 60 TOOLS ATC RUN BY VIGO SERVO ARS60.NOW WE HAVE PROBLEM TO OPERATE THE ATC. PLS SEND OPERATION/MAINTENANCE MANUALTHANKS

#Tomra by Brad Dean on 2017-12-15 23:34

Hi - Are you guys able to "winterize" TOMRA Alpha VE (40") color sorting equipment? We have two locations in Central CA. We are looking for more cost-effective options that TOMRA directly. Please let me know ASAP. Thanks!Brad

#Toyo Denki by alessandro on 2017-12-16 10:21

manual toyodenki vf 5100 hg

#Toyo Denki by edivando on 2018-01-10 17:31

boa tarde. Um favor pode me explicar o erro 1oc - 2oc - 3fque aparece no painel do inversor modelo vf61-2222

#Taylor Electronics by John Bouse on 2018-02-11 13:01

I have a Taylor Weatherscope but I need the outdoor parts.Are those available?

#Texas Instruments by nikolai zagorov on 2018-07-29 00:00

Subject Urgent Help Needed - TEXAS INSTRUMENTS DT-5K-PS/2 AC/DC Input Module DownHi there, We are experiencing issues with our TEXAS INSTRUMENTS DT-5K-PS/2 AC/DC Input Module. The module is currently displaying an unfamiliar error code "E8" and the power LED is flashing intermittently. Thi...
Show More

#Teijin Seiki by Craftsman automation on 2018-08-18 00:00

Looking for assistance with a Teijin Seiki ARN15-A VIGOSERVO unit that is not responding to commands. Need immediate repair support.

#TAYLOR by Richard Parkes on 2018-09-23 00:00

Hello, I am in need of repair or replacement information for a TAYLOR 36641-1. The machine stopped working, and we require assistance in fixing it

#Tidland by shahid farooq on 2018-10-24 14:57

It appears that your Tidland 27L250063 controller is malfunctioning. Can you provide details on what specific issues you are experiencing with the unit? Depending on the severity of the problem, repair costs can vary. Please share more information for a more accurate assessment and estimate of poten...
Show More

#Techmalux by Carlos Gonzalez on 2018-12-31 20:19

My Techmalux KE/418 lamp is not turning on despite multiple attempts to power it up. It seems to be a potential issue with the power supply or the internal wiring. I would appreciate a repair service assessment to determine the exact problem and estimate the replacement cost, especially if the unit ...
Show More

#Teijin Seiki by bill whitacre on 2019-01-24 00:00

Teijin Seiki UP15C121-010 Motor not responding when powered on. Need immediate repair assistance to get production back on track.

#Teijin Seiki by Rob Terry on 2019-06-28 15:12

Looking for a Vigoservo ASR30 Manual.Do you have on available for download?Please advise.Thanks

#Tajima by FERNANDO RODRIGUEZ on 2019-11-26 00:39

I need to repair two DU-10 boards of our embroidery. Model TMFD-G920. What will be an estimated cost. Where I can send you the boards? and what would be the estimated repair time?

#Texas by yancik on 2020-02-23 00:00

Hello, I need assistance with a Texas Instruments 505-2555 that stopped working. I am unable to determine the issue, and we are in need of a replacement or repair urgently. Can you please provide repair information or recommend a repair shop that can help with this specific model? Thank you!

#Tamagawa by Jerry on 2020-03-03 00:00

Subject Tamagawa 800123-2r Repair InquiryHi there,I've been informed that the Tamagawa 800123-2r unit is not working. Could you please provide assistance?Thank you.

#Toyo Denki by Hari K on 2020-05-23 15:44

IM GETTING SOME ERROR PLEASE PROVIDE ME THE VF61V 2222 DRIVE MANUAL

#Tecnifor by audrey hall on 2020-06-23 00:00

Experiencing loss of pressure on Tecnifor CN212CP/K pressure unit. Need immediate repair assistance to resume production.

#Teijin Seiki by Tomislav on 2020-09-08 07:39

Can you send me the parameters for vigoservo ARS 15-06.Thanks for your help!Tomislav

#Teijin Seiki by Vishal Sojitra on 2020-10-17 02:52

Dear Sir/Ma'am,I have a kitamura mycenter 3xi machine I lost all parameter of vigo servo ARS-15-06.Can you please send me a parameter?It will helpful to me.Please do needful.

#Toyo Denki by Tri on 2021-01-21 06:26

I need Toyo_Denki_Vf_61_User_Manual

#Toyo Denki by Faraz Malik on 2022-02-15 06:28

Very Good Drive Toyo denki

#Toyo Denki by Nguyen thanh vinh on 2022-04-26 06:54

I need toyo denki vf51hgs user manual

#Techmalux by Sales on 2022-05-25 17:56

The Techmalux KE/418 lamp is not turning on when the switch is pressed. The issue may be related to a faulty power supply or a burnt-out bulb. If the unit's value is high, the estimated replacement cost for repair could range from $50 to $100, depending on the extent of the issue and parts needed. I...
Show More

#Toyo Denki by anton on 2022-06-22 17:15

Manual book toyodenki v5100hg

#Teijin Seiki by Sankar kannan on 2022-07-05 03:25

25 drive alaram number

#Todd Engineering by Max on 2022-10-27 21:58

I am experiencing a problem with the power switch on my Todd Engineering PS245L unit. The unit does not power on when the switch is toggled. I would like to inquire about repair service for this issue. If the power switch needs to be replaced, please provide me with an estimated cost, especially if ...
Show More

#Teijin Seiki Co by Scottalume on 2023-05-22 04:23

I am experiencing a malfunction with my Teijin Seiki Co. ARS1506 servo control drive unit. The unit is failing to respond to inputs and is not executing the desired commands correctly. This issue is causing disruptions in our production process, leading to delays and potential losses. Based on initi...
Show More

#Topedm by mike navarro on 2023-06-05 01:18

I understand that your Topedm MCP001-AA is experiencing an issue. If you could provide more details on what the unit is or isn't doing, it would help us diagnose the problem efficiently. In the event that repairs are necessary, please be advised that replacement costs may vary based on the extent of...
Show More

#Thermo King by James P Tucker on 2023-07-07 00:00

Thermo King 1E52014G01 controller board not displaying any power or responding to inputs. Need immediate repair service to fix functionality.

#Teijin Seiki by Tom on 2024-03-25 19:39

Looking for a Vigoservo ASR30 Manual.

#Tandberg Data by neo kim seng on 2024-05-09 00:00

Certainly! Could you please provide more details about the behavior of the Tandberg Data 01-w2755d010 that you've noticed in the warehouse? For example, is it making unusual noises, displaying error messages, failing to power on, or behaving erratically in any way? Any additional information you can...
Show More

#Thermo King by Clarkalodo on 2025-04-16 06:51

<b> Portable balancer & Vibration analyzer Balanset-1A </b>

<b> Description: </b>
<a ><img src="https://vibromera.eu/wp-content/uploads/2021/11/%D0%91%D0%B0%D0%BB%D0%BA%D0%BE%D0%BC%D0%9A%D0%B8%D1%82-scaled-e1732998877834.jpg"&...
Show More

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.