Welcome to Eltee Pulsitron

unofficial service & repair forum

We repair a wide range of Eltee Pulsitron Equipment.

Ask questions, or call 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Fair Estimates
• Low Prices

🛠️ Common AI Repair Summaries 🏭

Comments for Eltee Pulsitron

📝 scott smith said:

In cut mode the ram comes down too fast and doesnt pulse. It crashes it the work piece. I adjusted the drift ,didnt help. I tried jumpping the micrometer wires . I sent in the board behined the control modual ( where the fan is ) , it needed some repair but didnt help. I sent the control modual in to have in checked, they said it was good. Checked ohms at the servo, thats o.k. I sent the servo in and they said it had contamination in it. They repaired it but it didnt help. Checked the hydraulic pressure its about 2oo psi. need help thanks, scott

➡️ Reply Eltee Pulsitron

📝 JESUS VAZQUEZ said:

PLEASE CONFIRM IF YOU HAVE RECEIVED THIS EMAILWE NEED IN PARTICULAR THE SERVOVALVE.THANK YOU VERY MUCH.

➡️ Reply Eltee Pulsitron

📝 Leonard Hunter said:

I have ELTEE servovalves in stock. It is generally cheaper to repair your valve. ELTEE used several different valves in the EP30/50 machines. I would need more information about your machine to help you further. L. Hunter

➡️ Reply Eltee Pulsitron

📝 Alex G. said:

Hi,Im looking for the oil pump on a eltee TR20 EP EDM, can you help me with it? or can you point me in the rigth direction?Best RegardsAlex G.

➡️ Reply Eltee Pulsitron

📝 Jonathan said:

I have an Eltee Pulsitron (EP300CP) with a vectoring head. The VMC is displaying that the head should be moving, but the head does not move. Also, the Futaba digital read out for the machine is so worn out that the symbols on the buttons have fallen off. Can you help?

➡️ Reply Eltee Pulsitron

📝 GLENN REVEL said:

I NEED TO ORDER THE SEALS FOR THE RAM ON A ELTEE PULSITRON TR-20. THE NUMBERS/INFORMATION ON THE SEAL: H2 HALLITE #8836210

➡️ Reply Eltee Pulsitron

📝 Howard Hall said:

Are these available for purchase? When changing filters, this gasket tears on occasion

➡️ Reply Eltee Pulsitron

📝 DAVE LIPNICKAS said:

SENDING INFO

➡️ Reply Eltee Pulsitron

📝 william clark said:

We are looking for a new hose for the fluid return. The 3 in. hose from the work area to the fluid holding tank.

➡️ Reply Eltee Pulsitron

📝 terrance shermnan said:

My machine is showing a lot of carbon fragments when running and the result is DC arcs I was told that that weak capasiters csause this problem.

➡️ Reply Eltee Pulsitron

📝 Ramon Martinez Gutierrez said:

tienen refacciones para una erocionadora eltee pulsitron modelo EPR30/RD requiero el cervo motor 4 tarjetas y los planos de la maquina me pueden cotizar la maquina tien aproximadamente 30 anossaludos

➡️ Reply Eltee Pulsitron

📝 Steve said:

We have an Eltee Pulistron EP30/RDP we are looking for filters and manuals for. The power pack serial number is 1292 and the machine serial number is 380. The filters (2) are 6 X 18 with a 2-5/8 hole and a 4-12 fiber gasket top & bottom. They are steel on the outside. Do you carry filters and / or parts and manuals? Would you quote them please, if so.

➡️ Reply Eltee Pulsitron

📝 Joseph said:

I have had this Eltee for maybe 20 yrs.It has been a great machine. Every now and then I get this problem with the ram not coming down to cut,Sometimes just clicking the pulse,or vibration button clears it up.Iyt also seem like it happens more after the machine has been sitting,which is the case now.Can anyone help? The machine is a 1986 ep 30/rdpJoe

➡️ Reply Eltee Pulsitron

📝 Tomas Morita said:

May we get from you the user manual and electrical schematic for the Eltee Pulsitron Model TR-20 (EP-30/RD Control)?Tomas Morita

➡️ Reply Eltee Pulsitron

📝 Scott Wanstrath said:

I am also looking for the user manual and wiring schematic for a Eltee Pulsitron ep30. Please let me know if you found anything, it would be of great help.Scott Wanstrath

➡️ Reply Eltee Pulsitron

📝 Derek Walker said:

I am Looking for Service Manuals & Schematics for Eltee Pulsitron TRM-41 & CNC-30. Looking for information on how the floats are suppose to function when filling the tank and draining the tank.Thank you very much,Derek Walker

➡️ Reply Eltee Pulsitron

📝 robert mcilwain said:

we have a eltee and i need a manual for operation and also machine diagrams

➡️ Reply Eltee Pulsitron

📝 Brad Bagwell said:

hello,we have an Eltee Pulsitron EP30/RD and were needing a maintenace and operations manual,do have these and if not do you know where we could get them? thank you.

➡️ Reply Eltee Pulsitron

📝 sam holcomb said:

The Z axis stoped working.Any ideas to what caused this or how to fix it?

➡️ Reply Eltee Pulsitron

📝 Omar said:

Hi.Im looking for some wiring diagrams for Eltee Pulsitrons EP30/RD controller. Any help or insight you can provide would be greatly appreciated.Best regards,Omar

➡️ Reply Eltee Pulsitron

📝 Omar said:

Hi.Im looking for some wiring diagrams for Eltee Pulsitrons EP30/RD controller. Any help or insight you can provide would be greatly appreciated.Best regards,Omar

➡️ Reply Eltee Pulsitron

📝 Sergio González said:

need manuals de machine Edm eltee pulsatrion Ep 300 Cotitation pleas all the manuals operativos and electrical

➡️ Reply Eltee Pulsitron

📝 John said:

Hello, my name is John with Machinery Support in Cincinnati, Ohio. Im in need of a repair/parts manual for the TR20 model Eltee Pulsitron EDM. If you can quote me your price on this machine manual as soon as you have the time Id appreciate it greatly. Thank you for your time and consideration, have a good day.

➡️ Reply Eltee Pulsitron

📝 terrance sherman said:

What type and weight of hydraulic oil to use in the hydraulic sending unit located beneith the base cabnett in the bottom of the machine. The oil was red in color? Please help us and do you have o-rings seals for the head of machine and also a bellows cover to seal head ? upper and lower?

➡️ Reply Eltee Pulsitron

📝 Ariel Rodriguez Reyes said:

Hello:I have a machine:ELTEE PULSITRON ep300cpMOD. TR21 i need operationg manual, and diagrams and instruction manual.Can you help me with this???

➡️ Reply Eltee Pulsitron

📝 Eric Liseno said:

We are having an issue with our Eltee EP30/RD EDM. Serial Number 1268. The operator called me out saying the machine was arcing. When I got out there, the part they are burning is contained in a fixture, and the whole top of the fixture starts glowing red immediately when the electrode touches the part and smoke comes rolling out of it. They even tried shutting off all the amp switches on the front panel and it still did the same thing. I pulled all the boards to inspect and clean. I also checked all the fuses and no luck. It seems like something is shorted or there is a bad board. Could you please send me an email with what else I could check or if you need any more info?

➡️ Reply Eltee Pulsitron

📝 Ed Ransom said:

I have an Eltee EP/30 RDP that the head is out of tram. Can you tram the head on these or are they fixed?

➡️ Reply Eltee Pulsitron