Welcome to Eurotherm

Eurotherm specializes in manufacturing precision temperature control instruments and solutions for industrial processes. They are known for their advanced PID controllers, data recorders, and power controllers that help optimize efficiency and productivity in various industrial applications. [AI]

We repair a wide range of Eurotherm Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.


Why to send us your work?

To receive more information about your Eurotherm industrial electronics unit, please contact us at 1-336-969-0110. We offer testing, refurbishment, and extended warranty support for Eurotherm equipment. Our team of experts is here to assist you with any questions or concerns you may have.

🛠️ Common AI Repair Summaries 🏭

🔧 Eurotherm 955spd-4r51()

The Eurotherm 955spd-4r51 is a temperature controller commonly used in industrial processes. It features a PID control algorithm for accurate temperature regulation, a large backlit display for easy monitoring, and various communication options for integration with other systems. Typical failures in the Eurotherm 955spd-4r51 may include display issues such as dim or blank screens, communication errors with other devices, or control algorithm malfunction leading to temperature fluctuations. Regular maintenance and calibration can help prevent such failures.

  • Part: 955spd-4r51
  • Est. Repair Price: $3,930.00 (est.)
🔧 Eurotherm 461/083/28/43/Eng/073/002/69/9 (Unknown)

The Eurotherm 461/083/28/43/Eng/073/002/69/9 is a multifunctional industrial temperature controller used for precise temperature regulation in various industrial processes. This model comes equipped with advanced control algorithms, easy-to-use interfaces, and multiple input/output options for seamless integration into existing systems. Typical failures in the Eurotherm 461/083/28/43/Eng/073/002/69/9 include power supply issues, sensor failures, communication errors, and software glitches. It is essential to conduct regular maintenance and calibration to ensure optimal performance and reliability.

  • Part:
  • Est. Repair Price: $250.00 (est.)
🔧 Eurotherm 461/082/13/19/008/002/00 GRAPH RECORDER(Unknown)

The EUROTHERM 461/082/13/19/008/002/00 GRAPH RECORDER is a precision recording device used in industrial processes to monitor and record critical parameters such as temperature, pressure, and flow rate over time. Its key features include a high-resolution display, multiple input channels, and programmable recording intervals. Common failures in the EUROTHERM 461/082/13/19/008/002/00 GRAPH RECORDER include power supply issues, display malfunctions, and data recording errors. These failures can often be resolved through troubleshooting techniques such as checking connections, calibrating sensors, and updating firmware.

  • Part: GRAPH RECORDER
  • Est. Repair Price: $2,436.00 (est.)
🔧 Eurotherm 451-082-29-37-76-00()

The Eurotherm 451-082-29-37-76-00 is a high-quality temperature controller used in industrial processes. It features advanced PID control algorithms for precise temperature regulation, a bright LCD display for easy monitoring, and multiple communication options for integration into control systems. Typical failures in the Eurotherm 451-082-29-37-76-00 may include power supply issues, display malfunctions, or communication failures. Component failure due to wear and tear over time can also cause erratic temperature control. Regular maintenance and calibration are recommended to ensure optimal performance and longevity of this device.

  • Part: 451-082-29-37-76-00
  • Est. Repair Price: $700.00 (est.)
🔧 Eurotherm 590a-0350-5-3()

The Eurotherm 590a-0350-5-3 is a high-performance DC drive used in industrial settings to control the speed of DC motors. It features a compact design, advanced control algorithms, and robust construction suitable for demanding environments. Typical failures in this model include power module failures, control board issues, and communication errors. Regular maintenance and timely repairs are essential to ensure optimal performance and longevity of the Eurotherm 590a-0350-5-3.

  • Part: 590a-0350-5-3
  • Est. Repair Price: $2,590.00 (est.)
🔧 Eurotherm 3504/Cc/Vh/2/Xx/1/1/Xxx/G/D4/D4/Am/X (Unknown)

The Eurotherm 3504/Cc/Vh/2/Xx/1/1/Xxx/G/D4/D4/Am/X is a versatile multi-loop process controller designed for industrial applications. It features advanced control algorithms, multiple inputs and outputs, a high-definition TFT display, and easy-to-use programming functionalities. Typical failures of the Eurotherm 3504/Cc/Vh/2/Xx/1/1/Xxx/G/D4/D4/Am/X may include issues with the display screen, power supply failures, malfunctioning control algorithms, faulty input/output connections, and communication errors. Regular calibration and maintenance are essential to ensure optimal performance and prevent unexpected breakdowns.

  • Part:
  • Est. Repair Price: $250.00 (est.)
🔧 Eurotherm 124316-002-023-03-92 (Unknown)

The Eurotherm 124316-002-023-03-92 is a precision temperature controller commonly used in industrial processes. It features a programmable input for various sensor types, PID control algorithms for optimal process regulation, and a bright and clear display for easy monitoring. Typical failures in this model include sensor calibration issues, power supply failures, and display malfunctions. Over time, the front panel buttons may wear out, and internal components such as relays and resistors may fail due to continuous usage. Regular calibration and maintenance are recommended to ensure accurate and reliable operation.

  • Part:
  • Est. Repair Price: $916.00 (est.)
🔧 Eurotherm Neb15-055/3-B2-H (Unknown)

The Eurotherm Neb15-055/3-B2-H is a high-performance industrial heating controller designed for precise temperature control in electric heating applications. It features a 15A output current rating, 3-phase power supply compatibility, and a Type B2 high-impedance input for thermocouples. Typical failures in this model include power supply issues, input signal failure, and output relay faults. Regular maintenance and inspection are crucial to ensure optimal performance and longevity of the Eurotherm Neb15-055/3-B2-H heating controller.

  • Part:
  • Est. Repair Price: $250.00 (est.)
🔧 Eurotherm 3504/CC/VH/2/XX/1/1/XXX/G/D4/D4/AM/X DRIVE(Unknown)

The EUROTHERM 3504/CC/VH/2/XX/1/1/XXX/G/D4/D4/AM/X is an advanced industrial drive used for controlling and regulating the speed of electric motors in various industrial applications. Key features of this drive include a high level of customization, allowing for the configuration of different control strategies and communication options. It offers a robust and reliable design suitable for demanding industrial environments. Common failures in this device typically involve issues with the power supply, control circuitry, communication modules, or the motor itself. These failures may result from electrical surges, thermal issues, or component wear over time. Proper maintenance and timely troubleshooting are crucial to ensure the optimal performance and longevity of the EUROTHERM 3504/CC/VH/2/XX/1/1/XXX/G/D4/D4/AM/X drive.

  • Part: DRIVE
  • Est. Repair Price: $1,400.00 (est.)
🔧 Eurotherm 918/0-5V/K/200-1200C/115V/A/VT 3 PHASE POWER CONTROLLER(Unknown)

The EUROTHERM 918/0-5V/K/200-1200C/115V/A/VT is a 3-phase power controller designed for industrial applications. It is used to precisely control the power supplied to heating elements, such as those in ovens or furnaces, based on inputs like voltage, temperature, and current. This model features a 0-5V analog input, a type K thermocouple input for temperature measurement range between 200 and 1200 degrees Celsius, and operates on 115V AC power supply. It also has a current rating and a voltage transient suppression circuit for surge protection. Typical failures in this power controller may include damaged power supply components, faulty control circuits, or issues with the thermocouple input leading to inaccurate temperature readings. Regular maintenance and monitoring of input signals can help prevent failures and ensure optimal performance.

  • Part: 3 PHASE POWER CONTROLLER
  • Est. Repair Price: $6,460.00 (est.)

Comments for Eurotherm

1 comments found.
📝 ritchie said:
Eurotherm 818P4 CNX150 displaying Error Code E002 when attempting to heat up thermolyne. — Purchase or Repair:
➡️ Reply Eurotherm
📝 robert simeon said:
Could you please confirm whether the Eurotherm 818P4 CNX150 Thermolyne unit is still supported or if replacement parts are available? Thank you. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Paul Casem said:
The Eurotherm 818P4 CNX150 unit at Thermolyne went down mid-shift. Please check and address the issue ASAP. Thank you! — Purchase or Repair:
➡️ Reply Eurotherm
📝 Dallas Rasberry said:
Hello, do you have a Eurotherm 818P4 CNX150 (Thermolyne) available for sale or repair? Production is currently down, and we need a quick solution. Thank you. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Coronado said:
The Eurotherm 818P4 CNX150 (Thermolyne) is down - suspect a failed drive or board. Will troubleshoot further upon arrival at the machine. — Purchase or Repair:
➡️ Reply Eurotherm
📝 VIJAY.M said:
Hello, Im reaching out on behalf of a client who is experiencing an issue with a Eurotherm 818P4 CNX150, Thermolyne device. They would like to inquire about repair services for this equipment. Thank you for your assistance. — Purchase or Repair:
➡️ Reply Eurotherm
📝 joe Delle Dinne said:
Unit Eurotherm 818P4 CNX150 (Thermolyne) went down mid-shift. Needs attention ASAP during the day shift. — Purchase or Repair:
➡️ Reply Eurotherm
📝 abdoaakl said:
The Eurotherm 818P4 CNX150 experienced a malfunction today, causing downtime during the shift. Could you please provide a quick update on what happened and when so we can address the issue — Purchase or Repair:
➡️ Reply Eurotherm
📝 Jim Hershiser said:
The Eurotherm 818P4 CNX150 is showing error code E001 and not heating up. Please advise on troubleshooting steps or repair options. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Howard Hendricks said:
Eurotherm 818P4 CNX150 at Thermolyne just had a drive or board failure during routine maintenance rounds. The issue needs immediate attention to avoid any production downtime. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Jim Tull said:
One of the Eurotherm 818P4 CNX150 units at Line 3 went down mid-shift. Please check it out as soon as possible tomorrow during the day. Thanks! — Purchase or Repair:
➡️ Reply Eurotherm
📝 Mike Griffin said:
Hello, I am interested in purchasing the Eurotherm 818P4 CNX150 (Thermolyne) unit. I wanted to inquire about the pricing and availability of this model. I am looking to source one quickly. Thank you. — Purchase or Repair:
➡️ Reply Eurotherm
📝 press said:
Hello, I am interested in purchasing an Eurotherm 818P4 CNX150, Description Thermolyne. Can you please provide information regarding pricing and availability? I am looking to source one as soon as possible. Thank you. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Dillon said:
The Eurotherm 818P4 CNX150 unit in the warehouse is not functioning normally. It is exhibiting unusual behavior that is different from its usual operation. — Purchase or Repair:
➡️ Reply Eurotherm
📝 John Elliott said:
Could you please confirm if the Eurotherm 818P4 CNX150 by Thermolyne is still supported, and if parts are available for replacement or repair? Thank you. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Londoño said:
The Eurotherm 818P4 CNX150 unit is not working correctly. Let the maintenance team know. — Purchase or Repair:
➡️ Reply Eurotherm
📝 muhammadzakria said:
The Eurotherm 818P4 CNX150 unit you have is not working. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Christopher Cruz said:
Hey, one of the drives or boards on the Eurotherm 818P4 CNX150 (Thermolyne) just went down during maintenance rounds. Heading to check it out now. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Morelli said:
Do you have a Eurotherm 818P4 CNX150 (Thermolyne) available for sale or repair? Production is halted, and we need to get it running again quickly. Thank you. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Dennis Lund said:
My Eurotherm 818P4 CNX150 (Thermolyne model) seems to be experiencing some issues. Something has stopped working, and Im not sure what the problem could be. Your assistance in diagnosing and resolving the issue would be greatly appreciated. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Jeremiah said:
I believe there might be a problem with the Eurotherm 818P4 CNX150 machine from Thermolyne. It seems like something has stopped working, and Im not completely sure what the issue is. I will try to gather more information and get back to you as soon as possible. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Fabiola said:
The Eurotherm 818P4 CNX150 (Thermolyne unit) malfunctioned today during the afternoon shift, causing a significant amount of downtime. We need to address the issue — Purchase or Repair:
➡️ Reply Eurotherm
📝 Phu said:
Eurotherm 818P4 CNX 150 drive or board failure in Thermolyne equipment, need immediate repair to prevent downtime.Heading to next machine for checks. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Nilo D. Dahingo said:
Eurotherm 818P4 CNX150 issue in Thermolyne line. Drive or board malfunction, urgent attention needed. Heading to next machine, will investigate further. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Mr. Mya Than Soe said:
Eurotherm 818P4 CNX150 Thermolyne industrial unit needs repair. Not functioning, seeking repair technician. Please assist. — Purchase or Repair:
➡️ Reply Eurotherm
📝 abel said:
The Eurotherm 818P4 CNX150 unit in the shop is not working. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Snow said:
Eurotherm 818P4 CNX150 unit at station X is down mid-shift. Needs attention, wont power up. Please check it out tomorrow. Thank you! — Purchase or Repair:
➡️ Reply Eurotherm
📝 Neville Thomas said:
Hello, my Eurotherm 818P4 CNX150 Thermolyne industrial unit is malfunctioning and needs repair. Looking for a technician specialized in Eurotherm units to diagnose and fix the issue — Purchase or Repair:
➡️ Reply Eurotherm
📝 GANESH PM said:
Eurotherm 818P4 CNX150 Thermolyne equipment is down. Displaying Error Code E004, not heating up. Need assistance ASAP. — Purchase or Repair:
➡️ Reply Eurotherm
📝 aceto said:
The Eurotherm 818P4 CNX150 (Thermolyne) unit in the warehouse is exhibiting abnormal behavior. Ive noticed that it is not performing its regular functions and acting strangely. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Armindo carneiro said:
Eurotherm 818P4 CNX150 (Thermolyne) unit down. Needs fixing before next shift. Check it out ASAP. — Purchase or Repair:
➡️ Reply Eurotherm
📝 suranga said:
The Eurotherm 818P4 CNX150 in our Thermolyne line is malfunctioning, causing a halt in production. Urgent repair is needed to get the line up and running quickly. — Purchase or Repair:
➡️ Reply Eurotherm
📝 mike hetherington said:
The Eurotherm 818P4 CNX150 display is blank, indicating no power supply. Could this be a faulty power cord or a blown fuse? Need assistance — Purchase or Repair:
➡️ Reply Eurotherm
📝 Richard Moore said:
Eurotherm 818P4 CNX150 displaying Err 5 code, not reaching desired temperature. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Ahego said:
Machine displaying error code 350, not reaching set temperature. — Purchase or Repair:
➡️ Reply Eurotherm
📝 Andrew Kuehn said:
Hello, I was advised to get my Eurotherm 818P4 CNX150 Thermolyne fixed or replaced. Can you please let me know if it can be repaired or if it needs replacement? Im trying to check this off my to-do list. Thank you. — Purchase or Repair:
➡️ Reply Eurotherm
📝 ALEJANDRO dominguez said:
Do you have a Eurotherm 514c/08/00/00 available for sale or repair? Our unit is down and we need it to keep production running.— Purchase or Repair:
➡️ Reply Eurotherm
📝 Gilberto Saraiva said:
Issue escalated Eurotherm 2704 VH 121 XX D4 R4 malfunctioning, unknown description. Urgent action needed to restore production line. Please investigate and resolve ASAP to minimize downtime.— Purchase or Repair:
➡️ Reply Eurotherm
📝 HIBA said:
Eurotherm 029-077-01-65-00 is displaying Valve Controller Failure error.— Purchase or Repair:
➡️ Reply Eurotherm
📝 Charles Flory said:
Hello,I hope you are doing well. I understand that you are seeking assistance with your Eurotherm emd-dh-sct unit, which is older and the manufacturer is unknown. I recommend reaching out directly to Eurotherm or any authorized distributors to inquire about the availability of support, replacement parts, or repair options for this unit. They should be able to provide you with the most accurate information and guidance regarding your specific model.Best regards,— Purchase or Repair:
➡️ Reply Eurotherm
📝 snc said:
The Eurotherm 690 Series 5.5KW Inverter is not working.— Purchase or Repair:
➡️ Reply Eurotherm
📝 Zdenek Slaby said:
We experienced downtime on the Eurotherm 2500E/S/8LOOPUW module today between 1000 am and 1130 am. Can you please provide a quick explanation of what happened before the next shift arrives? Your— Purchase or Repair:
➡️ Reply Eurotherm
📝 rahimi said:
Hello, I hope this message finds you well. We have an older Eurotherm 2216L/C/H/2/X/1/ENG Temperature Controller that were looking to either repair or replace. Could you please let us know if this model is still supported and if replacement parts are available for it? Thank you.— Purchase or Repair:
➡️ Reply Eurotherm
📝 Lenora said:
Can you please provide detailed information or specifications for Eurotherm 5701-4? My client is experiencing issues with the device, and we would like to understand the problem better for potential repairs. Thank you!— Purchase or Repair:
➡️ Reply Eurotherm
📝 Faizal Khan said:
Eurotherm 2404 temperature controller is displaying error code F07.— Purchase or Repair:
➡️ Reply Eurotherm
📝 maschmeyer said:
The Eurotherm 818S/0V12/R0V5 controller is displaying abnormal behavior in the warehouse. It is not functioning as it typically does.— Purchase or Repair:
➡️ Reply Eurotherm
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.