Welcome to F

unofficial service & repair forum

We repair a wide range of F Equipment.

Ask questions, or call 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.


Why to send us your work?

To receive more information about your unit then fill out the email form below
and we will be in contact with you within 24 hours.

🛠️ Common AI Repair Summaries 🏭

🔧 F P Electronics Division 319597-305(Unknown)

The F P Electronics Division 319597-305 is a power supply unit designed for industrial applications. It provides stable power output to various electronic devices in the machinery. This model features overload protection, overvoltage protection, and short-circuit protection. Typical failures include blown fuses, capacitor failures, and damaged power transistors due to overloading or power surges. Regular maintenance and periodic inspections are recommended to prevent unexpected downtime.

  • Part: Electronics Division 319597-305
  • Est. Repair Price: $1,302.00 (est.)
🔧 F Studer AG 1332 665A/00(Unknown)

The F Studer AG 1332 665A/00 is a precision power supply designed for industrial electronic equipment. It features a high level of accuracy and stability in output voltage and current, making it suitable for demanding applications. Typical failures in this model include component degradation, power supply issues, and poor thermal management leading to overheating. Regular maintenance and monitoring of critical components are recommended to ensure optimal performance and longevity.

  • Part: AG 1332 665A/00
  • Est. Repair Price: $2,424.00 (est.)
🔧 F Studer1332 665A/00 AG PCU Sender Empf2(Unknown)

The F Studer1332 665A/00 AG PCU Sender Empf2 is a PCU sender unit used in industrial applications for monitoring and controlling various parameters. It features high precision measurement capabilities and communication interfaces for data transmission. Typical failures include sensor malfunctions, communication errors, and power supply issues. Regular maintenance and calibration are recommended to ensure accurate and reliable operation.

  • Part: 665A/00 AG PCU Sender Empf2
  • Est. Repair Price: $2,426.00 (est.)
🔧 F Studer AG 1332 622C 100(Unknown)

The F Studer AG 1332 622C 100 is a precision signal generator designed for industrial and laboratory applications. Its primary purpose is to generate accurate and stable signals for testing and calibration purposes. Key features of this model include a wide frequency range, high signal quality with low distortion, and precise amplitude control. It is also equipped with various output options and interfaces for versatile connectivity. Typical failures in the F Studer AG 1332 622C 100 may include issues with the frequency synthesis circuitry, component failures in the signal path, or problems with the amplitude modulation functionality. Regular maintenance and calibration are necessary to ensure reliable performance.

  • Part: AG 1332 622C 100
  • Est. Repair Price: $2,676.00 (est.)
🔧 F Studer AG 1330 337A 01/B(Unknown)

The F Studer AG 1330 337A 01/B is a high-quality industrial electronics repair device used for troubleshooting and repairing electronic components in manufacturing equipment. It features advanced diagnostics and precision testing capabilities to accurately identify faulty components. Typical failures in this model include damaged circuit boards, defective power supplies, and malfunctioning circuitry due to overheating or electrical surges. It is essential to have expertise in industrial electronics repair to effectively diagnose and fix issues with this device.

  • Part: AG 1330 337A 01/B
  • Est. Repair Price: $250.00 (est.)

Comments for F

46 comments found.
📝 MS. said:
Hey there, the Fisher Rosemount 275 unit went down mid-shift. Not sure what the issue is, someone needs to check it out ASAP. Thanks!
➡️ Reply Fisher Rosemount
📝 Rodney Burke said:
Do you work on this type of winder. We just got this and can not get it started out of adjustment. Thanks
➡️ Reply Frastan
        
📝 mike gartside said:
HI yes we repair recondition and build new coreless rewinders
➡️ Reply Frastan
                
📝 Bill Emmers said:
We have 2 Frastan rewinders that we acquired in an acquisition, one is 30 wide and one is 48 wide. We run the 48 machine much more than the 30 machine. We run 50# offset paper that we first print with a flood coat ink to completely color one side of the web. These rolls are typically produced in 50 and 200 rolls with about a 7/8 dia hole in the center. We are not overwrapping the rolls, we just hand tape and hand pack the finished rolls into cartons. We have no idea what the maximum and optimum running speeds are and what we might need to do to achieve those speeds. I am also wondering how often the rubber tires on the winding rollers need to be changed, we seem to change them quite often and after the change typically we see a better wind but I think we are changing them needlessly rather than making adjustments.Thanks,Bill
➡️ Reply Frastan
                        
📝 heinz koch said:
Dear bill, if you need new winders, technical latest design, do not hesitate to contact machine building company OLBRICH, GermanyCoreless winders uptodiameter : 200 mmmax.speed: 300 m/min depends on the materialmax working width 1200 mm.adjustable web tensionspecial coated rollers for extremly high efficency and durationsales Mr. Klaus Ruland. email : kruland@olbrich.dephone +49 2871 283/888
➡️ Reply Frastan
        
📝 Rudolf Strohmenger said:
Plasma display unit P/N25581687, Model number SII1240-200, our P/O F4700019323. Failure: u/s
➡️ Reply Frastan
        
📝 Otto Schmidt said:
EnquiryDear Sir or Madam,So, please tell me the price of the machine LABEL FEEDER,and also the prices of the Spare parts from the machine FRASTAN SERVICE MANUAL with the articlenumbers 6552, FR0587; FR0588 I need it in german, or is it possible to get an german represantative---Yours faithfullyOtto Schmidt
➡️ Reply Frastan
📝 Randy Van Wyngarden said:
I need to purchase a rotary poisition sensor make by Foxboro/Jordan. Model # PF1010 Code # 1010-.25 Do you have know where I can purchase one? It is nothing more than a potentiometer mounted in an explosion proof housing and geared so .25 turns of the input shaft turns the pot 340 degrees.
➡️ Reply Foxboro/Jordan
        
📝 Doug said:
I am also having trouble finding units of this nature. It is the most reliable type in our systems. Most of the newer ones use an arm instead of a rack-and-pinion to move the mechanism. They also are not very tolerant to lightning strikes as the old Foxboro is. Sorry!
➡️ Reply Foxboro/Jordan
        
📝 Jaryan Gladden said:
I have two of this actuator that needs repaired.
➡️ Reply Foxboro/Jordan
                
📝 Juan Antonio Rodriguez Morales said:
¿Can you send me general information (with main dimensions) of a Foxboro/Jordan Rotary Actuator Unit Size TN200/MB30? Thank you very much for advance.
➡️ Reply Foxboro/Jordan
                        
📝 KARINA CORPUS said:
Buenas tardes, me urge cotizar un actuador FOXBORO, algun correo para enviar la peticion de oferta?Quedo al pendiente de su mas pronta respuesta.Gracias.
➡️ Reply Foxboro/Jordan
        
📝 brian williams said:
I have a customer that has a Foxboro/Jordan EC10649 unit and needs to order a potentiometer for it (Part # VW-1K-2358425). I need a contact number for someone who sells parts for these units so that I can order parts. Can you help?
➡️ Reply Foxboro/Jordan
        
📝 Lee McClune said:
I worked with Randy in yrs before retiring, now need some info, looking for self contained sonac, not sure of the name, want 0-10v output, we used them in our 3M plant,,Thanks, LFM=================
➡️ Reply Foxboro/Jordan
        
📝 Josue Moraes said:
Hello,I am looking for a motor manufactured by Foxboro Jordan:Mod 461123 SM 1500-100 PH /C/V/A/60/120/1How can I find it new or refurbished?Thanks for now Josue Moraes 12/30/09
➡️ Reply Foxboro/Jordan
        
📝 WILLiam dwyer said:
please provide information concerning price and turn around for these unitsthank you
➡️ Reply Foxboro/Jordan
📝 marty draves said:
Fuji Electric 6km 223003n1a1 is experiencing power loss, unable to turn on. Looking for a repair specialist to diagnose and fix
➡️ Reply Fuji Electric
📝 Paul Hickton said:
We currently have a Force computer board, Part Number: SYS68K/CPU-1C. can you please tell me if you are able to test and repair this type of board.If you can, please supply the approx turn round time and cost please.Regards,Paul
➡️ Reply Force
        
📝 Hideaki Endo Mr. said:
Dear sir,We are looking for purchase or repair Force SYS68K/CPU-1C single board computer.Please quote for repair the board with year warranty.Sincerely,Hideaki EndoWorkmanship Co.,Ltd.in Japanwww.workmanship.comemail:controlware@aol.com or h.endo@workmanship.com
➡️ Reply Force
                
📝 Alan Pentland said:
Dear Mr. Hideaki,I am Senior Engineer for Focus Support Ltd and we have recently started repairing the Force IBC-20/1. I believe this is similar to the board you wish to have repaired.Please let me how many boards you currently have for repair and how many you would expect to see for repair each month.Best regardsAlan S. Pentland
➡️ Reply Force
📝 Juvy Alvarez said:
We have 13 fire pump installed in various location in MRT Line 2 System. One of battery chargers became defective some months ago, it was not charging anymore. We are about to replace the charger but the price is too prohibitive. I am just inquiring if it is possible that the charger be repaired, or could you just refer us to your authorized repair center here in the Philippines.We are looking forward for your help, thank you
➡️ Reply Firetrol
        
📝 mohamed saad said:
We have 2 fire pump installed in our location in Jordan One of battery chargers ( firetrol 200 Amp Hour Capacity LL-1580) became defective some months ago, it was not charging anymore. We are about to replace the charger but we didnot know the price . I am just inquiring if it is possible to tell us the price of new one and the possibility to rapaire the defective one .
➡️ Reply Firetrol
                
📝 Salleh said:
we having problem with battery charger, actualy our panel model (FTA1100J). The problem is, when that engine starting time, foult alarm came out and display battery charger mulfunction, we already comfirm the battery condition, by used battery tester (free maintanance batt. N150 x 2unit). After a few second, charger change from slow to fast charge (26vdc to 30vdc). Can you give suggestion, about this matter,
➡️ Reply Firetrol
        
📝 Harris Mohidin said:
DEAR SIR,WE NEED YOUR ASSISTANCE TO PRESENT US THE MANUAL ABOVE CHARGER DUE OF OUR EXISTING FIRETROL CHARGER FAIL AND DID NOT HAVE QUALIFIED PERSON TO SOLVE IT.PLS REVERT AS SOONEST.TQ
➡️ Reply Firetrol
                
📝 Muhammad Yaseen said:
Dear Sir,we are in need of your rep. in pakistan to assist regarding the supply & Maintenance/Repair of Firetrol Battery Charger (200 Amp H Capacity) with AC Fuse Type 3AG 6A 250V and DC Fuse Type 3AB 20A 250V.Muhammad YaseenMechanical EngineerBobi Oil ComplexOGDCL Pakistan
➡️ Reply Firetrol
                        
📝 khulaif Abdullah said:
we are in need for your advice for the reasons why AC fuse 6A blown out in frequent time.
➡️ Reply Firetrol
                        
📝 thinesh said:
our existing firetrol battery charger 200amp hour capacity failure.it cant charge the battery and even not working at all
➡️ Reply Firetrol
                                
📝 Alexey said:
Please help me solve the problem of the battery charger firetrol, the fault is on, do not charge the batteries, without voltage in the chargers output, batteries were changed a month ago and another time they are downloaded.
➡️ Reply Firetrol
                
📝 Ossama A/Aty said:
Dear sirIwould like the suser manual for firetrol battery charger 200 ah and if you have agent at egypt for repairing theses types of chragers.your kind help appreciate regarding manualossama
➡️ Reply Firetrol
                        
📝 khaled said:
Dear sirIwould like the suser manual for firetrol battery charger 200 ah and if you have agent at egypt for repairing theses types of chragers.your kind help appreciate regarding manualossama
➡️ Reply Firetrol
                                
📝 Faizan Hassan said:
The above mentioned Firetrol charger is not working. Will be thankful if you send us its service/repair manual.
➡️ Reply Firetrol
                        
📝 gunaraja said:
Our fire battery charger cannot charge and it light up red and fault .what was the problem, can I get manual and the circuit diagram for this. Can the card been repaired.
➡️ Reply Firetrol
                
📝 Andrie said:
Where can we buyFiretrol Battery Charger 200AH CapacityAC Fuse 3AG 6A 250VDC Fuse 3 AB 20A 250 V.......................... 2 Unitis there any seller in indonesia?Thank youRgds,Andrie
➡️ Reply Firetrol
                        
📝 DRS.H.DARNO. MM said:
Dear Sirs, Please obtain the best price and delivery time for the following items : ItemStock CodeDescriptionQtyUoiUnit Price (IDR)Total Price (IDR)001 018829001 BATTERY CHARGER, MANUFACTURE :FIRETROL 24 VDC BATTERY CHARGER MODEL : C-652 FTA1100-EN24N 8 EA Your early response ie appreciated. Best regards, Drs.Darno/Arie. Adressed : General & Co CV Sawo I Street No.20 Bontang East Kalimantan Indonesia Telp : 0548-5100036, 510039 Fax : 0548-25517 HP. 081346555799 NOTE. : WHERE IS AGENT AT INDONESIAN
➡️ Reply Firetrol
                                
📝 nyoto atmojo said:
Dear Sirs, Please, give me the best price for Battery Charger as explanation below :Manufacturer : FIRETROL 12VDC, 200Amp, AC Fuse Type 3AGA , 250V DC Fuse Type 20A 250.Also manual user for the battery charger above.Your quick response and cooperation, highly appreciated.RegardsNYO
➡️ Reply Firetrol
                        
📝 Dewi Suminar said:
Dear Sir/ Madam,We need 1 unit ofCHARGER, BATTERY, FIRETROL, AS-2001-003, WITH COMPONENT P/N:PC-1061Best regards,Dewi SuminarPT Envika RekateknikIndonesia
➡️ Reply Firetrol
                                
📝 LAFENDRI said:
Please quote your price for the following itemsBATTERY CHARGER MANUFACTURE:FIRETROL, 24VDC,BATTERY CHARGER MODEL:KAS-2001-003, FTA1100-EN 24N,C/W TRANSFORMER AND CABLELEAD CONTROLLER QTY: 4EaDimensi and weight ..?For you prompt reply willbe appreciated
➡️ Reply Firetrol
                                        
📝 RINI said:
BATTERY CHARGER MANUFACTURE:FIRETROL, 24VDC,BATTERY CHARGER MODEL:KAS-2001-003, FTA1100-EN 24N,C/W TRANSFORMER AND CABLELEAD CONTROLLERQTY: 4Ea
➡️ Reply Firetrol
                                                
📝 Hamed mohtarami said:
Please send us price and delivery time for one set of above type of battery chargey .best regard MOHTARAMI
➡️ Reply Firetrol
                                                
📝 JEFFREY OMAYUKU said:
Good day,My name is Omayuku Jeffrey Gbubemi,i am the managing director of Jevin Energy Limited,we are a procurement ,engineering and logistics company.Please we will be most grateful if you can furnish us with your quote on the material stated below.Please quote with gross weight and dimensions.1- UNIT,CHARGER,BATTERY,24V,C/W 2 TRANSFORMER,CHARGERS AND WIRINGHARNESSESMODEL:KAS-2001-003MFG:FIRETROLRegards,Omayuku Jeffrey Gbubemi,MD.JEVIN ENERGY LTD
➡️ Reply Firetrol
                                                        
📝 Elaine said:
Dear sir , This is Elaine . I send the RFQ for FIRETROL LL-1580 2pcs. I really need it .please give the quotation for the new and orginal.Looking forward to your earlly reply.best regards,
➡️ Reply Firetrol
                                                                
📝 RAUL TUSCANO said:
Dear sir , This is Raul, May I inquire about, FIRETROL BATTERY CHARGER LL-1580 2pcs. I really need it . please give the quotation for the new and original. Looking forward to your early reply. best regards,
➡️ Reply Firetrol
                                                
📝 PHIL RUSH said:
NEED TO GET PRICING AND AVAILABILITY ON THESE CHARGERS. wE HAVE A CHEMICAL COMPANY THAT IS IN NEED ASAP!!!!THANKS,PHIL
➡️ Reply Firetrol
                                                        
📝 ain said:
Dear Sales,We are looking for asco firetrol battery charger KAS 2001-003 for 2 units.
➡️ Reply Firetrol
                                                
📝 Eddie Sim said:
Please do quote us 2 units of KAS-2001 Battery Charger. Thanks.Thanks & Regards,Eddie SimUltech Engineering Sdn. Bhd.Lot 1493, Piasau Industrial Estate,98000 Miri, SarawakTel: +6085-654133 Fax: +6085-491150Mobile : +6013-8113733www.ultech-engineering.com
➡️ Reply Firetrol
                                
📝 canciano ramirez said:
Dear Sir / Madam May I know if how much is the price of a new battery charger for diesel engine fire pump controllers model NS1100J-30 the problem is battery charger # 1 failurre or please help me to troubleshoot about this.Thank you .
➡️ Reply Firetrol
                                
📝 TATIANA said:
HELLO: IM LOOKING FOR THIS REFERENCE. THE PRICE AND TIME FOR DELIVERY Catalog number: FTA 1100 - Jl12 N (FIRETROL) Serial number: 613201 - 01RE QTY: 1THANK YOUTATIANA
➡️ Reply Firetrol
                                        
📝 ARIF said:
Kindly quote on urgent basis the price and and delivery schedule of the above charger c&f Karachi - Pakistan.
➡️ Reply Firetrol
                        
📝 syaepul said:
Where can we buyFiretrol Battery Charger 200AH CapacityAC Fuse 3AG 6A 250VDC Fuse 3 AB 20A 250 V.......................... 2 Unitis there any seller in indonesia?Thank youRgds,Syaepul
➡️ Reply Firetrol
                        
📝 Mrs iwany said:
Dear Sir/Madam,Please kindly quote us for the following items :1# BATTERY CHARGER FOR FIRETROL; BATTERY CHARGER FOR FIRE PUMP MANUFACTURE: FIRETROL FIRE PUMP MARK II NS1100-30(A) 200 AMP HOUR CAPACITY, TYPE 3AB 20A 250V DC FUSE LL-1580; Qty = 2 EAThank you.Regards,Wany (70300882 / 08551110309)PT. Prasasti Karya Sentosa/Prakarsa SAFETY Jl Daan Mogot No. 20D Jakarta Barat 11460Telp : 021-5669611, 5645668, 5678894Fax : 021 – 5660163 Email : prasasti@dnet.net.idWebsite : www.prakarsa-safety.co.id
➡️ Reply Firetrol
                                
📝 Abdul Waheed said:
Dear Sir/Madam,Please quote us for the following items :Diesel Engine Fire Pump Control Panel Battery Charger Firetrol Battery Charger 200 Amps Hour Capacity.Qty:01.
➡️ Reply Firetrol
                
📝 Fatima Shaikh said:
Dear Sir,Please give us your best price including packing Ex-works Packer Agility Projects Logistic in Houston TX 77032 USA, for the item(s) mentioned below as soon as possible. Provide Freight Charges to Packer.Advise availability of the material. Quote for NEW, OEM and Genuine only.Mention Country of Origin.QTY 1EACHARGER , BATTERY, FOR CONTROLLER S/N 139501 FIREWATER PUMP, DIESEL ENGINEFIRETROL INC P/N FTA1100-EL24N-XVENDOR P/N CG-0652In the event of an order, payment will be wire transferred to you before the shipment.Our Billing address is as follows :MOK Corporation Gen Trdg LLC.P. O. Box 41021,B-302 Baniyas Complex,Nasser Square, Deira,Dubai, United Arab Emirates.Tel : 00971-4-2240190Fax : 00971-4-2239183Email: purchasing-branch@mokco.aeEmail: purchasing.mok@gmail.com We thank you for your kind attention and hope to receive your reply soon. Best regards, Fatima shaikh
➡️ Reply Firetrol
                        
📝 Ika Lyana Ling said:
Please advise us your best price and delivery time for : 1. BATTERY, ALKALINE, DURACELL INC, PC915, 6 V, 13 AH SCREW TOP LANTERN. Quantity : 6 EA 2. CHARGER, BATTERY, FIRETROL, BATT-CHG 12V.C-655, FT1100-E, FOR DIESEL ENG FIRE PUMP CTRL.. Quantity : 2 EA 3. ELECTROLYTE, BATTERY ACID, 1 LITER/BOTL, H2SO4. Quantity : 106.000 L 4. BATTERY, CHARGER, AUTOMATIC, LINEGUARD CORP, LGC24V20A, 24 VDC, 20 AMP, 60 HZ, 1 PHASE. Quantity : 1 EA 5. BATTERY, PLC, SANYO ELECTRIC CO LTD, CR14250SE. Quantity : 1 EA
➡️ Reply Firetrol
                                
📝 KHALID HASSAN said:
Kindly inform that we need Battery Charger ( Firetrol ) for Diesel Engine Fire pump controller with Specification :-200 Amp. Hour Capacity –DC Fuse Type :- 3AB ,20A ,250 V,_ AC Fuse Type :- 3AB ,6A ,250V ( located under cover ) PLZ,send your offer early ASAP .
➡️ Reply Firetrol
                                        
📝 Abdul Waheed said:
Dear Sir /Madam,Kindly quot us your best price following item.Diesel Engine Fire Pump Controller Panel Battery ChargerFiretrol Battery Charger 200 Amps Hour Capacity Qty: 01.
➡️ Reply Firetrol
                
📝 Ouyporn Aumphirat said:
Dear Whom concerm,Please suggest me on the battery charger fault. That shown fault all time.Best regards,Ouyporn A.
➡️ Reply Firetrol
                        
📝 Fathi said:
I have two battery charger and shown all time fault I do not why
➡️ Reply Firetrol
                
📝 Mr.Thawatchai Suwanprasom said:
DEAR SIR,WE NEED YOUR ASSISTANCE TO PRESENT US THE MANUAL ABOVE CHARGER DUE OF OUR EXISTING FIRETROL CHARGER FAIL AND DID NOT HAVE QUALIFIED PERSON TO SOLVE IT.PLS REVERT AS SOONEST.TQ
➡️ Reply Firetrol
                
📝 SAID ABDELAZIZ said:
DEAR SIR KINDLY SEND TO ME YOUR BEST PRICE FOR THIS ITEM BATTERY CHARGER FIRETROL 2000AMP HOUR CAPACITY ,USED FOR FIRETROL DIESEL ENEGINE CONTROL PANEL (MARK II AS-2000F)P/N:FTA1100-JL12N-BA-F-LQTY:2Im looking forward to hear from you soon.With best regards Miss. /Rehab Ali COMPANY NAME: HAPI FOR ELELCTRICAL POWERCOMPANY ADDRESS: 396 EL HARAM STREET _ CAIRO _ EGYPT TEL & FAX:(202)_35874476AND(202)_35855015E_MAIL: HAPI_POWER @YAHOO.COM E_MAIL: HAPI_POWER @HOTMAIL.COM
➡️ Reply Firetrol
                
📝 Lisa Wang said:
Dear Sir,I want to inquiry an quotation with Battery charger.AS-2001H;200AH capacity;; Manufacture :Firetrol ,QTY:4 EAPlease offer your price ASAP. ThanksI am looking forward to hearing from you. Thanks and Best regards Lisa
➡️ Reply Firetrol
                        
📝 Steven Kwok said:
I want to inquiry an quotation with Battery charger.AS-2001H;200AH capacity;; Manufacture :Firetrol ,QTY:4 EAPlease offer your price ASAP. Thanksor please provide the email address of your correct contact person to us!Thanks and Best regards ¹u´O¸¦ Steven KwokEiUUEÐOÐcu»uе°²E«Ee±¸OÐIÞ¹«E¾Shenzhen¡¡Zhongqi¡¡Mechanical¡¡&¡¡Safety¡¡Equipment¡¡C0.,LtdRm¡¡805,Shangfu¡¡Building,¡¡East,¡¡Dengliang¡¡Rd,¡¡Nanshan¡¡District,¡¡ShenzhenTel:0755-26434053¡¡¡¡¡¡MB:15814693491Fax:0755-26487052HTTP:www.zq-china.com¡¡¡¡E-mail:zhongqi@zq-china.com
➡️ Reply Firetrol
                                
📝 Steven Kwok said:
want to inquiry an quotation with Battery charger.AS-2001H;200AH capacity;; Manufacture :Firetrol ,QTY:4 EAPlease offer your price ASAP. Thanksor please provide the email address of your correct contact person to us!Thanks and Best regards ¹u´O¸¦ Steven KwokEiUUEÐOÐcu»uе°²E«Ee±¸OÐIÞ¹«E¾Shenzhen¡¡Zhongqi¡¡Mechanical¡¡&¡¡Safety¡¡Equipment¡¡C0.,LtdRm¡¡805,Shangfu¡¡Building,¡¡East,¡¡Dengliang¡¡Rd,¡¡Nanshan¡¡District,¡¡ShenzhenTel:0755-26434053¡¡¡¡¡¡MB:15814693491Fax:0755-26487052HTTP:www.zq-china.com¡¡email:zhongqi@zq-china.com
➡️ Reply Firetrol
                                        
📝 insuntetepeby said:
Wonderful Your site is very helpful... Thanks...
➡️ Reply Firetrol
                                        
📝 Agus Supriyadi said:
Dear sir,we need new module of firetrol battery charger 200AH, JBL28100164.How many price about it?regards,agus
➡️ Reply Firetrol
                                        
📝 EMAD said:
dears we want to inquiry an quotation for Battery charger.AC fuse type 3AG 6A 250 V (located under cover) ;200AH capacity;; Manufacture :Firetrol ,QTY:1 EAPlease offer your price ASAP. Thanks
➡️ Reply Firetrol
                
📝 Mr. Richa Teng said:
Dear Sirs,We ould appreciate it if you could quote us the best price and availability of 2 units of Battery charger FT 1100E, 12V.C-655 for diesel engine fire pump control 13267832.Urgent !!!!!!!!! The tender closing date is October 12, 2010.Thank you.Best Regards,Richa Teng / Richie DengDurapower AsiaPte Ltd322 Jalan Ahmad Ibrahim,Singapore 629151.Email : richateng@pacific.net.sgFax. No. +(65)65614002Website : www.durapowerasia.com.sg
➡️ Reply Firetrol
                
📝 BOLA BANKOLE said:
CHARGER:BATTERY MFG FIRETROL,PN LL-1580 FIRETROL BATTERY CHARGER 200AH TYPE 3AB 20A 250A,PN LL-1580,RATED CAPACITY 200 AMP HOUR, CAPACITY COMPLETE WITH AC FUSE TYPE 3AG,6A ,250 V-DC FUSE TYPE 3AB ,20A,250V-CONNECTORS AND SOCKETS
➡️ Reply Firetrol
                        
📝 HASIM said:
REQUEST FOR QUOTATION BATEREI CHARGER FIRETROL TYPE 3AB20A250V RATED CAPACITY 200AH (1 UNIT )
➡️ Reply Firetrol
                
📝 dewi puspa said:
1 Ea, Battery Charger, Firetrol, Batt-CHG, 12 V.C-655, FT1100-E, for Diesel End Fire Pump CTRL
➡️ Reply Firetrol
                
📝 Wimol F said:
Dear Sir,Pls quote price BATTERY CHARGER CARD 200 AH CAPACITY, FIRETROL, MODEL: LL-1580, FOR BATTERY 12 V, 80 Ah Qty. 1 Each Best Regards,Wimol
➡️ Reply Firetrol
                
📝 Luis Rivera said:
HiWe have a customer looking for 5ea. AS-2001 Firetrol battery charges.Please provide price and availability.Thank YouLuis Rivera
➡️ Reply Firetrol
                
📝 mingjuin Lin said:
We arreplacemente try to find firetrols fta1100 battery charger for replacement, please provide brochure and price. lead time.
➡️ Reply Firetrol
                
📝 Mohammad Naseem said:
Sowing 17.4 dc volt and alarm high battery voltage
➡️ Reply Firetrol
                
📝 ISKANDAR said:
Dear Sir/ Madam,We would like to request your quotation, please quote the best price, delivery time and term of payment of the below item:No.QTYDESCRIPTION11 EaCharger, Battery P/N : AS-200 1H 200 AMP Hour Capacity () Used For Disel Engine Fire Pump Controler Model : FTA1100-J Cat No. FTA110-JL12N Mfg : FIRETROLWe are waiting for your response as soon as possible. Thank you for your kind attention and cooperation.Regards, PT. ISSANAZakaria Ar.PT. ISSANAJl. kembang Pacar No. C 65AKramat Pulo, Jakarta 10450Phone : 6221-3160087Fax : 6221-3144659
➡️ Reply Firetrol
                
📝 Marty Ward said:
Battery charger is out of a Firetrol FTA 1100 MK 11 Diesel Engine Fire pump controler. Unit is putting out 13.67 volts and showing amp output on screen of controler out put is within.2 amps of charger one . We have battery trouble code for charger 2. replaced with new and cleared falt.Please give rough estimate to repair.Thanks, Marty
➡️ Reply Firetrol
                        
📝 James Hale said:
To whom it may concern,We installed a charger upgrade kit (KAS-2001-003 ) in April of 2011 and have recently had some issues with over charging. We cannot locaqte our manual . It is installed in a Firetrol Cat# FTA1100-AA24LN-AA Cabinet Ser# 130263.Can you provide me with a service manual?
➡️ Reply Firetrol
                
📝 Alvaro Ferro said:
HelloCould you please give me a quote with your best price on the following PRODUCT and estimated BEST time of delivery to FL 33166 of :01 FIRETROL AS-2001 BATTERY CHARGERBest RegardsAlvaro FPRODELCOM EIRL/ PITS LIM : 174258376 NW 68th StMiami, FL 33166-2655
➡️ Reply Firetrol
📝 Dennis Betker said:
FMC 156447-R not powering on, no display. Need immediate repair assistance.
➡️ Reply Fmc
📝 ON OFODILE said:
I urgently need some quantity of a transducer for a CNC machine as follows: Manufacturer: Fadis s.p.aType/Make: Lic. Construz. Patent No 12201/16 Please send to me the unit price, shipping and other charges.
➡️ Reply Fadis
        
📝 Anatoly said:
Now in Russia there is no network of the service centers of repair (service) of the medical equipment. UNISERV has 130 service centers on repair of computers. I suggest under your managementmanual (delivery of spare parts, training, etc.) on the basis of the available service centers to organize a network of service of the medical equipment.UNISERV is a member of the Russian Association of Repair and Sale of the Medical equipment.A.Nesterov
➡️ Reply Fadis
📝 Andy said:
We need a Item #A06B-0141-B077. If you have one in stock, we are intrested in it. We can send you back our Motor so you have a core. If you dont, we woild like to know the leed time to repair ours and a Not to Exceed price.PS-- We also need a power supply replaced/repaired. It is a Mitsubishi #MDS-A-CV-150. Can you help us on this also?
➡️ Reply Fanuc
📝 kaviyarasu stanley said:
Certainly! Your Futaba EIRFBH002A Reader Head Assembly may be experiencing an issue if it fails to read data correctly or consistently. This can manifest as difficulties in scanning, misinterpreting information, or outright failure to detect any input. These issues usually indicate a malfunction within the reader head itself. When considering repair, the estimated replacement cost can vary depending on the specific damage and required parts or components. As such, a thorough inspection by a qualified technician is essential to determine the exact scope of the problem and provide an accurate cost estimate for repairing or replacing the reader head assembly. We recommend reaching out to a certified repair service specializing in Futaba equipment for a detailed assessment and repair solution tailored to your units needs.
➡️ Reply Futaba
📝 Israel Salas said:
Hello, it seems that the Fanuc A20B-1001-0770 board is malfunctioning and in need of repair. The unit may be showing errors or completely non-responsive. Depending on the complexity of the issue, repair costs can vary. If the unit is deemed high in value, the estimated replacement cost could be significant. It is recommended to seek professional repair services to diagnose and fix the problem efficiently.
➡️ Reply Fanuc
📝 John H Smith said:
I need cables (encoder and motor) to connect a DARC S12(35-060800) to a AC servomotor(HD142e6-130, 35161701).The cable part number are:70-25060070-251500
➡️ Reply Ferrocontrol
📝 RORY FISHER said:
WE HAVE A MATSUURA MC-2000V THAT IS IN NEED OF SOME PARTS. THE HAND CONTROL DOESNT WORK ON .100 AND THE CONTROL COVERS OR OVERLAYS ARE CRACKED. DO YOU CARRY THESE PARTS?THANKS
➡️ Reply Fanuc
📝 Dale Parrish said:
HelloIm working on a Le-blond-Makino 86 with an 11M control I get a 070 PC alarm when the machine starts and Makino says it is a CPU PCB A16B-1000-200-06D and I need to know how much and how fast to get this fixed please help.Dale P
➡️ Reply Fanuc
📝 dave swetnam said:
I have a High Voltage rectifier board for use in a high voltage lighting system - formerly purchased from Flash Tech. I am unable to purchase replacement boards, and am now looking for someone to repair my old boards. Can you be of any help?Dave
➡️ Reply Ftca
📝 Harris Mohidin said:
DEAR SIR,NEED YOUR ASSISTANCE TO GET MANUAL OF BATTERY CHARGER ABOVE.THANKS
➡️ Reply Firetrol
        
📝 Luis Lerman Agudelo Bermudez said:
not present pulse PWM on TP 18 for converser DC-DC
➡️ Reply Firetrol
        
📝 mr.siwaporn palatkong said:
NEED YOUR ASSISTANCE TO GET MANUAL OF BATTERY CHARGER ABOVE.
➡️ Reply Firetrol
        
📝 Edgar Barbosa said:
Dear Please need the diagram controller for this equipment , this charger Baterry dont work the operation is dont correct, we are need check this dispossitive.FIRETROL BATTERY CHARGER 200ah TYPE 3AB 20A 250VRegardsEdgar Barbosa G.
➡️ Reply Firetrol
        
📝 khulaif abdullah said:
we need your assistance to get the manual for above battery chargerthanksabdullah
➡️ Reply Firetrol
        
📝 Thawatchai Suwanprasom said:
I had problem of Charger re occured fault .Can you help me for troble shooting to this proplem?
➡️ Reply Firetrol
        
📝 herman florez said:
DEAR SIR,NEED YOUR ASSISTANCE TO GET MANUAL OF BATTERY CHARGER ABOVE.FIRETROL BATTERY CHARGER 200ah TYPE 3AB 20A 250ATHANKS
➡️ Reply Firetrol
📝 Tracy Steverson said:
Subject Repeated Issue with FISCHER & PORTER 3K620000046951 Control ModelHello,I am the inventory manager at , and I have noticed that we have been receiving multiple returns or reports regarding the FISCHER & PORTER 3K620000046951 Control Model. The specific issue has not been clearly described in the documentation we have on file. Our technicians have mentioned that there seem to be recurring problems with this unit. Could you please investigate this matter further and provide us with a detailed analysis of the common repair issues associated with this particular model?Thank you for your attention to this matter.Best regards,Inventory Manager
➡️ Reply Fischer Porter
📝 Brian Hill said:
I have four of these units that need to be diagnosed and then repaired. One of them somebody plugged a connector into the wrong socket and now the screen just flickers white and then black and never boots up. Please let me know by email or at the telephone number approximately how much you charge to check these units out. I would like to get this moving as soon as possible as I have a machine down for no lcd unit. I ned to get this machine up and running as soon as possible. Thanks, Brian Hill
➡️ Reply Fanuc
        
📝 silvano said:
four units...test free of charge....
➡️ Reply Fanuc
📝 David said:
My meter will not read amps, it read volts and every thing else but when it comes to amps the meter just scales from 0-300 over and over and when clamped around a wire it will still not read amps, is this worth repairing or can it be repaired any estimate of what it would cost?
➡️ Reply Fieldpiece
        
📝 fredie said:
my fieldpiece HS 35 blown when i tried to used it to read microwave voltage.i replaced the fuse but its still not working.i realised i have used it over the maximum rating which is 700 volt ac.but i assume the fieldpiece has some protection again it.
➡️ Reply Fieldpiece
📝 Mr. Johny said:
Subject Urgent Request for Repair Info - FAAC Gate RP418DSHello,We are in urgent need of repair information for a FAAC Gate RP418DS board. Currently, something has stopped working and we require a replacement part, but we are unable to locate one. Could you please provide guidance on where to source this part or suggest a suitable alternative for repair?Your
➡️ Reply FAAC Gate Manufacturing Co.
📝 Ed Puckett said:
We have an Elumatec MGS245 saw with an E550 controller. The controller uses a Kontron MOPSlcd6 PC/104 processor and a Ferrocontrol fieldbus card (all of these are German companies). I think that the fieldbus card is out. I think that the part number for the card is 91027100, but Im not sure.We need either a replacement card or to have the existing card and/or controller repaired. I have pictures of the card and controller that I can email.
➡️ Reply Ferrocontrol
        
📝 Brian Borst said:
We have an Elumatec MGS244 saw with an E550 controller. The controller uses a PC/104 processor and a Ferrocontrol fieldbus card (all of these are German companies). I think that the fieldbus card is out. I think that the part number for the card is 91027100, but Im not sure.We need either a replacement card or to have the existing card and/or controller repaired.
➡️ Reply Ferrocontrol
📝 Christopher J. Misseri / Polymeric Converting LLC. said:
Industrial Electronic Repair, We are looking for a company that can evaluate, test and repair a Forma Scientific Temperature Control Module @ a reasonable price .The Temperature Control Module part number was 231083 and is superceded by part 231883 per factory.This module fits a Forma Scientific Model # 3029 Countertop IncubatorThe unit is not responding to adjustments and the temperature output reading is not the same reading as the setpoint.We cant get the reading on the digital display to correspond to the to the set point and cant calibrate it.Please let us know if this is a unit you can test, calibrate and repair as needed. Thank You, Christopher J. Misseri
➡️ Reply Forma Scientific
📝 Mohammed Ghany Ewad said:
hello my dearI from iraq have 12 machine for your company.all the machine model 1990like NL11 sm,NL9S,W 3.3,U21-R.....................Please need your healp ..to work this machine I no have any thing about this machine ..need eng. to see this machine can i found any one in near my contary or turkey or india.please I like open work with your co.i need sperpart thank you Mohammed Ghany Ewad
➡️ Reply Fehrer
📝 An, Yuping said:
Type: s02-00-2e, current controll error
➡️ Reply Ferrocontrol
📝 Terry Potter said:
We have a Fincor power board 106049902-G that we need to send in for estimate repair. What are your terms and turn around time. We would have several if you can be economical and good turn around time. Please advise, thanks Terry!
➡️ Reply Fincor
📝 Larry Hurst said:
I am the maintenance director at an amusement park called worlds of fun.We are located in Kansas City Mo.I have a Fales power supply that that is bad.It is 480v to 24v dc.It is 4.5kw. sn is 0082/0113m.Would you be able to help us or have a replacement? Thanks, Larry hurst
➡️ Reply Fales
📝 Mark Rohlfs said:
I have a fanuc lcd screen that is dim. A02b-0220-c050. Can this be repaired?
➡️ Reply Fanuc
📝 Benjamin F Graves said:
Hi ive tried several times to cailbrate my Fieldpiece HS26. I can only get it to go down to 200V and thats as far as the pot screw goes. should I send it in to you? Or is there something else I can do. Thank you Ben F Graves. Senior Lab Tech-Earthsytems South West, Bermuda Dunes California92203 USA.Phone 760-345-1588 EX-3316
➡️ Reply Fieldpiece
📝 MAGDY SOLIMAN said:
CE VERSION V96.1A2-3 JOG AXES TO HOME POSITION THEN ENTER THE CS COMANDNO ENTER NEXTCOMAND DISPLY ON SCREEN AND I SEE LEDS ON BOARDS ON COPUTER FLASHING BACKUP BATTERY ON CPU1400-5 IS GOOD INEED TO SLOVED PROPLEM
➡️ Reply Fadal
📝 MEMO said:
Dear Mr. I have Indctotherm furnace 150 Kw with 2 heating element for aluminums and other for cast iron.When westart unit theres no indication on the meter (power- volt- frequency)We checked all diode and SCR and fuse all of them is OK So I want your advice how can make dry test for this furnace or how can repairthanks and best regardes
➡️ Reply Furnas
📝 Ben F Graves said:
hi I sent my HS-26 to you fro Repair did you recive it . Please let me know Thanks Ben
➡️ Reply Fieldpiece
📝 Mike gartside said:
If anybody needs assistance repairs, manuals, or new machinery with regard to frastan machinery contact me direct.mike@frastan.co.ukThanks
➡️ Reply Frastan
📝 Richie said:
hi, i have a federal signal siren model 67 with a working 6v motor on siren and light. i want to know if i can get it converted to 12v. i also have a motor off of a federal beacon model 17 id like to get estimates on also. (all motors work perfectly, just need it converted to 12v) thank you, Richie
➡️ Reply Federal Signal
📝 aaron pence said:
ROM number 152 A02B-0065-H512
➡️ Reply Fanuc
📝 Jay Rees said:
Hi, I am an integrator and will be visiting a new client regarding a JordanControls Dancer Pot. They gave me a part number:PF1010-E-2.89-0-Z-0.Id like to make a good impression during my first visit with the client, would you mind answering a few questions?- Is this a valid part number?- Can you repair this unit?- What is the turn around time?- Are spare units or a replacement available?Thank you! Jay Rees
➡️ Reply Foxboro/Jordan
📝 Bjorn Karlsen said:
What is this:10:33 (1)- SWRestart: Reboot = 0, Powerfail = 0 10:33 (2)- SWRestart: Reboot = 0, Powerfail = 0 10:33 (2)Emergency: Data transfer card 1 - card 2 is interrupted 10:33 (2)Emergency: Data transfer card 1 - card 2 is interrupted 10:33 (1)- PB-Status = Reboot: 0 PF: 0 HW-SN:1019 Var.: 257 10:33 BIOS-Ver.:27.07.94 17:00:00 10:33 (1)- SWInfo = MBSS V2.20 17.08.1994 FKCUT /dDPR8 10:33 (1)- EL = 8000 0800 3800 0007 0000 0000 0000 0000 10:33 ERGOMOVE-ERROR: 2003 (Board (1) Hardwaredefect, #15) Cutting center stopped to 10:33:11 6- 4-2011
➡️ Reply Fecken-Kirfel
📝 tracey schryba said:
please find me a flotronics flo-10 vac. pump/blower asap
➡️ Reply Flotronics
📝 RIGOBERTO BENITEZ said:
LEFT STICK ONLY GOES ONE WAY IT DOES NOT HAVE SPRING TO THE OTHER...... AND I WANT A REFURNISHED
➡️ Reply Futaba
📝 RIGOBERTO BENITEZ said:
LEFT STICK ONLY GOES ONE WAY IT DOES NOT HAVE SPRING TO THE OTHER...... AND I WANT A REFURNISHED
➡️ Reply Futaba
📝 RIGOBERTO BENITEZ said:
LEFT STICK ONLY GOES ONE WAY IT DOES NOT HAVE SPRING TO THE OTHER...... AND I WANT A REFURNISHED
➡️ Reply Futaba
📝 RIGOBERTO BENITEZ said:
LEFT STICK ONLY GOES ONE WAY IT DOES NOT HAVE SPRING TO THE OTHER...... AND I WANT A REFURNISHED
➡️ Reply Futaba
📝 RIGOBERTO BENITEZ said:
LEFT STICK ONLY GOES ONE WAY IT DOES NOT HAVE SPRING TO THE OTHER...... AND I WANT A REFURNISHED
➡️ Reply Futaba
📝 RIGOBERTO BENITEZ said:
LEFT STICK ONLY GOES ONE WAY IT DOES NOT HAVE SPRING TO THE OTHER...... AND I WANT A REFURNISHED
➡️ Reply Futaba
📝 RIGOBERTO BENITEZ said:
LEFT STICK ONLY GOES ONE WAY IT DOES NOT HAVE SPRING TO THE OTHER...... AND I WANT A REFURNISHED
➡️ Reply Futaba
📝 RIGOBERTO BENITEZ said:
LEFT STICK ONLY GOES ONE WAY IT DOES NOT HAVE SPRING TO THE OTHER...... AND I WANT A REFURNISHED
➡️ Reply Futaba
📝 Eric Haffner said:
We have an Elumatec SBZ122, and the monitor has gone dark.I would like to repair the display instead of replacing it (cost).Monday evening I installed a new display panel, and it worked on Tuesday, but not on Wednesday. I suspect the power supply, however the power supply is controlled by another module.I can find no evidence of any component failure.I feel the components are relatively easy to replace.I would be willing to send pictures, if you supply an email address.The machine is running, as I have connected an external monitor.Thank you,Eric HaffnerPlease CC emails to my personal address, because many time I am unable to get to a computer at work.ehaffner@trulite.com / eric.thered@yahoo.com
➡️ Reply Ferrocontrol
📝 patrick engle said:
Hello, Im experiencing some difficulties with the Fuji Electric DES100A Drive. It seems like something may have malfunctioned, and Im not quite sure what the issue is. Your assistance in diagnosing and resolving the problem would be greatly appreciated. Thank you.
➡️ Reply Fuji Electric
📝 Tarmizi said:
i have 2 unites of firetrol chargers that need repair as it tend to over charged the battery.
➡️ Reply Firetrol
📝 Steve O;Neill said:
We believe the part number for the fan is 581764.But could be ART#880225.Was wondering if you service and or support the F&K vac skiver # M111467 ?
➡️ Reply Fecken-Kirfel
📝 Roy Hartschen said:
Looking for repair service for a malfunctioning Fuji Electric DES100A controller unit. Issue unknown, requires diagnostic and repair expertise.
➡️ Reply Fuji Electric
📝 Scott Mook said:
I need a price and availability on a new cutter for this machine. The book shows a part #02006.Thank you,Scott
➡️ Reply Felins
📝 Dave Stevens said:
calibration of the following by an ISO 9001 companymfg Federal Pioneer (FPE)model DDT-SDDescription Protective Relay Test Set, AC Overcurrent Relay Test SetOur customer cannot provide us with schematics or specification so we are unable to develop verification tolerances, nor can we get the pin outs to determine the proper contacts for timer verification. Apparently this model number is used for analogue and digital displays. This unit has analogue displays.
➡️ Reply Federal Pioneer
📝 Alexander Uggah said:
Dear Sir,I have a problem regarding Firetroll Battery Charger. On the panel, System Status indicates that there is Charger Malfunction and Battery #1 Trouble. Inside the panel, the Battery Charger indicates Fault LED 3. I unable to reset it. The voltage across the Battery #1 is 2.1 Volts and 0.2 Ampere. Please help us to solve what causes this. Thank you,Alexander UggahPlant Unit Section, Electrical
➡️ Reply Firetrol
📝 collavet said:
hello,I have a fahr bucher mc3, there is a problem when a power its.the screen inform me connection impossible with koppelkarte.Can you repair my koppel karte.
➡️ Reply Fahr Bucher
📝 musab said:
The reader head assembly on your Futaba EIRFBH001B unit seems to be malfunctioning. The unit is not reading or recognizing input data, causing disruptions in its normal operation. This issue likely requires a replacement of the reader head assembly, which may come with an estimated cost ranging from $100 to $200 depending on the model and specific parts needed for repair. To ensure the proper functionality of your unit,
➡️ Reply Futaba
📝 subhash said:
Fairway 59516 not powering on, need immediate repair assistance.
➡️ Reply Fairway
📝 Pedro Duart said:
Received an urgent alert for a failed FUJI FCS-4I/O-2416P I/O CARD. Need to troubleshoot and replace it ASAP to prevent any production downtime.
➡️ Reply Fuji
📝 Michael Girard said:
The FSP Group Inc. FSP277-4F01 power supply is not turning on. No lights or fan activity when power is applied. Possible power supply failure. Further inspection and troubleshooting required.
➡️ Reply Fsp Group Inc
📝 glupan tupic said:
: My office copier has been experiencing consistent issues since last week, primarily with jams and paper feed problems that cause significant delays in production. The machine now frequently malfunctions, leaving us unable to produce output consistently. While the previous service call addressed a loose cable issue, it hasnt resolved the ongoing problem. Based on our recent experiences and the complexity of the malfunction, I estimate replacement costs to be in the range of $500-$700 for a new unit with comparable functionality.:
➡️ Reply Flygt
📝 Willie Downey said:
Machine Issue Formax c34692 not powering on despite multiple attempts.
➡️ Reply Formax
📝 Charles Martin said:
Experiencing issues with Farm Works 900-B Dyne Charge Electronic Fence Controller - not powering on. Need immediate repair assistance.
➡️ Reply Farm Works
📝 Iko said:
My Fluke 117 multimeter is not displaying readings accurately. Need repairs ASAP.
➡️ Reply Fluke
📝 Tom said:
I have a defective light as described above.
➡️ Reply forum2
📝 Tom said:
I have a Rittenhouse Home Intercom
➡️ Reply forum2
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.