Welcome to GE

We repair a wide range of GE Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Free Estimates
• Low Prices

🛠️ Common AI Repair Summaries 🏭

Comments for GE

📝 Lim Thiam Hock said:

We are big user of GE drives. I am responsible to engage repair agent. Currently, I need some DCFB cards for GE DC drives. Are you able to supply immediately ?— Purchase or Repair:

➡️ Reply General Electric

📝 Mike said:

I have a surge arrester and no information on it at all. These are some of the numbers within the unit: bar code UT056415 ; barcode 4512 104 71144 . On a small green label gepruft 1205 . On the outside of the unit, this number and description: 9890 000 02472 Surge Arrester . I am in need of a cut sheet or submittal information. The unit is about 14 x 6 x 2.5 deep. A grey case, with an attached mounting plate, has pigtails about 3 ft long, purple, brown, black and green w/yellow stripe.Any information you can provide me for his unit will be of great help. This information is from an existing unit and we wish to duplicate this unit in another instillation. Thanks... Mike Vessels, Electrical Services...— Purchase or Repair:

➡️ Reply Gepruft

📝 Henry Brzeski said:

Gentleman,I got a Gelma POP 1-2/S036.2/GB controller with one bad axis card which needs to be fixed. I would like to know how long would it take or if you guys could supply only the bad card. I know that this is an old controller and there are no spare parts available for it. Here some numbers which I took straight off the board: Sach-nr: 295g - 32 - GA/5Fab NR : 0617. Dont know if this is of any help. Thank you and have a nice day!

➡️ Reply Gelma

📝 tronik said:

Gefanuc 78005682 IssueHi there,Im reaching out on behalf of someone in the shop regarding the Gefanuc 78005682 unit. They mentioned it isnt working. Could you please look into this?Thank you.

➡️ Reply Gefanuc

📝 snc said:

Hello, can you please provide repair information for a General Electric PWM50G 2183 44A399749 board? Something seems to have stopped working and we need a replacement urgently. Thank you.— Purchase or Repair:

➡️ Reply General Electric

📝 suranga said:

The General Electric PWM50G 2183 44A399749 is displaying an error code E34 and is not responding to any inputs.— Purchase or Repair:

➡️ Reply General Electric

📝 Scott Krinke - Biker said:

My GENERAL ELECTRIC OSMONICS OZONE SYSTEM appears to be malfunctioning and is not producing ozone as it should. I need urgent repair assistance to ensure our industrial process can continue smoothly.— Purchase or Repair:

➡️ Reply General Electric

📝 Jeffrey Garofola said:

I believe there might be an issue with the circuit board in your Gendex Orthoralix 8500. Unfortunately, were experiencing some trouble with its functioning. Would you like us to look into it further?— Purchase or Repair:

➡️ Reply Gendex

📝 IDONGESIT EKPO said:

The motor control on Ge Procond Elettronica 141914 is malfunctioning, halting the production line. Immediate repair service is required to resume operations— Purchase or Repair:

➡️ Reply Ge Procond Elettronica

📝 ALAN O\'SULLIVAN said:

wE HAVE A 400A 600V GEC ALSTHOM MINIFORM PANEL INSTALLED AT CANYNGE HALL ,UNIVERSITY OF BRISTOL WHICH HAS 100 AMP SWITCH FUSES.wE NEED TO UPGRADE ONE OF THESE SWITCH FUSES TO 200 AMP CAN YOU ADVISE?

➡️ Reply Gec-Alsthom

📝 Danny W Thamyiz said:

Dear Sirs,My customer need these following items : 1. AAU 900V1 45380355 1X 2. DAU 900V1 45180353 3X 3. DOU 911V1 45180387 1X 4. SAU 900V1 45180351 1X 5. PCU 900V1 787052548 1X 6. CPU 900V1 45180398 1X All of them are Alsthom product, or GE Alsthom...i dont know exactly...but they are RTU or Remote Terminal Unit card...Sincerely., Danny W Thamyiz Mobile : +62 818 064 43 577

➡️ Reply Gec-Alsthom

📝 Danny W Thamyiz said:

Dear Sirs,My customer need these following items : 1. AAU 900V1 45380355 1X 2. DAU 900V1 45180353 3X 3. DOU 911V1 45180387 1X 4. SAU 900V1 45180351 1X 5. PCU 900V1 787052548 1X 6. CPU 900V1 45180398 1X All of them are Alsthom product, or GE Alsthom...i dont know exactly...but they are RTU or Remote Terminal Unit card...Can u supply the above of parts,pls send me the best price including shipping cost to our address.Sincerely., Danny W Thamyiz Mobile : +62 818 064 43 577

➡️ Reply Gec-Alsthom

📝 Sigit Prayoga said:

We need to replace sleeve bearing DE & NDE of AC Generator with the spec. of Gennerator as follows:AC GENERATOR Manufactured by, : GEC Alsthom kVA : 4964 Serial no. : P140009-10Voltage primary: 3300 RPM : 1500Ampere primary: 868 Frequency : 50 HzPhase : 3 Power Factor : 0.9Insulation class: B IP : 54Temperature rise: 300C Ambient Temp. : 300CMachine weight: 19550 Kg Bearing Sleeve Bearing Please kindly quote your best price & condition and delivery time.Thank you & with kind regardsSigit Prayoga

➡️ Reply Gec-Alsthom

📝 MALCOLM LOCKE said:

I HAVE A DYMAT M3 ELECTRONIC BED ADJUSTER,WHICH HAS PARTLY STOPPED WORKING. AS PART OF THE CONTROLLER IS STILL WORKING , I HAVE PUT IT DOWN TO THE CONTROLLER & NOT THE MOTOR BEING FAULTY.CAN YOU SUPPLY A REPLACEMENT CONTROLLER OR CAN YOU FIX ONE I HAVE?MANY THANKS IN ADVANCED FOR YOUR TIMEMALCOLM LOCKE— Purchase or Repair:

➡️ Reply Gepruft

📝 thomas nardini said:

looking for a black & white monitor for a 1987 sprint gerber thankyou— Purchase or Repair:

➡️ Reply Gerber

📝 Traynor said:

Issue with General Electric Unit 1c752dpa062-bbHi ,I am writing to inform you about an issue with the General Electric unit, model 1c752dpa062-bb, located in the warehouse. While performing routine checks, I noticed that this unit is not functioning as expected. Heres a brief description of the unusual behavior- The unit seems to be operating at a reduced efficiency, as it is taking longer to complete its usual tasks.- There are intermittent noises coming from the unit, which sound like irregular clicks or hums that werent present before.- The output quality or performance of the unit appears to be inconsistent, with occasional glitches or fluctuations.- There is a noticeable increase in the units temperature, suggesting it may be overheating.- The unit occasionally shuts down or restarts on its own without any obvious cause.Please let me know how youd like to proceed with troubleshooting or if a technician should be called in for further inspection.Best regards,— Purchase or Repair:

➡️ Reply General Electric

📝 Ronald Hunt said:

The GENE GENE-5315 Rev A1.0 1907531502 CPU Board caused downtime on our shift today. Please provide information on what went wrong and when it happened. Need to know before the next shift arrives. — Purchase or Repair:

➡️ Reply GENE

📝 salah faddl allah said:

The GENE-5315 Rev A1.0 1907531502 is a CPU Board that isnt working. — Purchase or Repair:

➡️ Reply GENE

📝 mahendran said:

Can the GENE GENE-5315 Rev A1.0 1907531502 CPU Board be repaired or replaced? Im trying to check this off my to-do list. — Purchase or Repair:

➡️ Reply GENE

📝 gerold said:

Could you please let me know if the GENE GENE-5315 Rev A1.0 1907531502 CPU Board can be repaired or if a replacement can be purchased? Im trying to check this off my to-do list. Thank you. — Purchase or Repair:

➡️ Reply GENE

📝 mike gartside said:

The GENE GENE-5315 Rev A1.0 1907531502 CPU Board unit isnt working. — Purchase or Repair:

➡️ Reply GENE

📝 Jesse Galien said:

The GENE-5315 Rev A1.0 1907531502 CPU board you mentioned is exhibiting unusual behavior in our warehouse. It is not performing its normal functions, and we are currently investigating the issue. Thank you for bringing this to our attention. — Purchase or Repair:

➡️ Reply GENE

📝 KANDAVEL said:

Board failure alert GENE-5315 Rev A1.0 1907531502 (CPU Board) needs immediate attention. Maintenance team to investigate ASAP. — Purchase or Repair:

➡️ Reply GENE

📝 khanfasi said:

Hello, I am interested in purchasing a Gespac VIG-4W 9340 Video Board. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Gespac

📝 MEYERS said:

I need assistance with GENE GENE-5315 Rev A1.0 1907531502 CPU Board. Please provide information regarding repair options and pricing. Thank you. — Purchase or Repair:

➡️ Reply GENE

📝 LESKO said:

Board GENE-5315 Rev A1.0 1907531502 (CPU Board) just failed. Need to replace ASAP to avoid downtime. — Purchase or Repair:

➡️ Reply GENE

📝 saumet said:

The GENE GENE-5315 Rev A1.0 1907531502 CPU Board is still down. Please provide an update immediately. — Purchase or Repair:

➡️ Reply GENE

📝 Montefiore said:

Hello, Im interested in purchasing the Gespac VIG-4W 9340 Video Board. Could you please let me know the pricing and availability? Im trying to source one quickly. Thank you! — Purchase or Repair:

➡️ Reply Gespac

📝 Rich Potter said:

Please provide details on repair and possible solutions for Gespac VIG-4W 9340, a Video Board. Thank you. — Purchase or Repair:

➡️ Reply Gespac

📝 Luis Godinez said:

Im currently experiencing issues with my GENE GENE-5315 Rev A1.0 1907531502 CPU Board. It seems like something has stopped working properly, but Im unsure about the exact problem. Your assistance in diagnosing and resolving this issue would be greatly appreciated. Thank you. — Purchase or Repair:

➡️ Reply GENE

📝 DAVE VAZQUEZ said:

Hello, Im interested in purchasing the GENE GENE-5315 Rev A1.0 1907531502 CPU Board. Could you please provide information about the pricing and availability? I am looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply GENE

📝 Craig Pickenpaugh said:

The Gespac VIG-4W 9340 unit is not functioning properly. It is described as a Video Board. I am new and still learning about its functions. — Purchase or Repair:

➡️ Reply Gespac

📝 Vincenzo Giobbe said:

Do you have a spare GENE GENE-5315 Rev A1.0 CPU Board available for sale or repair? Our unit went down, and we need to keep production running. — Purchase or Repair:

➡️ Reply GENE

📝 Al-wakil said:

Video board on Gespac VIG-4W 9340 is not displaying any video feed. — Purchase or Repair:

➡️ Reply Gespac

📝 HUGO said:

Hello, we urgently need assistance with the GENE GENE-5315 Rev A1.0 1907531502 CPU Board. Our unit is still down. Please provide an update — Purchase or Repair:

➡️ Reply GENE

📝 Yamahajbk said:

the GENE-5315 Rev A1.0 1907531502 CPU Board went down mid-shift. Need someone to check it out ASAP tomorrow. Thanks! — Purchase or Repair:

➡️ Reply GENE

📝 Li Zhi Yun said:

The unit isnt functioning properly, please investigate. — Purchase or Repair:

➡️ Reply GENE

📝 DeVrieze said:

Do you have a replacement GENE-5315 Rev A1.0 1907531502 CPU Board available for sale or repair? Production is down and we need to keep it running. Thank you. — Purchase or Repair:

➡️ Reply GENE

📝 joey lavery said:

Hey, could you let me know if you have repair info for a Gespac VIG-4W 9340 video board? Its not working, and we need a replacement. Thanks! — Purchase or Repair:

➡️ Reply Gespac

📝 Kishan said:

The unit is not working and needs maintenance. — Purchase or Repair:

➡️ Reply GENE

📝 Johan Hagglund said:

Please provide an update on the status of the GENE GENE-5315 Rev A1.0 1907531502 CPU Board as the unit is still down. Your — Purchase or Repair:

➡️ Reply GENE

📝 Molly Maxson said:

We are experiencing repeated CPU errors on the GENE-5315 Rev A1.0 1907531502, impacting our production line. Urgent repair needed to minimize downtime. — Purchase or Repair:

➡️ Reply GENE

📝 RICHARD CORFIELD said:

The Gespac VIG-4W 9340 video board is showing a constant flashing red light. Unable to display any video output on the monitor. Please advise on troubleshooting steps to resolve the issue — Purchase or Repair:

➡️ Reply Gespac

📝 Anke Hamalian said:

Im experiencing an issue with my GENE GENE-5315 Rev A1.0 1907531502. It seems like something on the CPU Board has stopped working. Any guidance or assistance would be appreciated. — Purchase or Repair:

➡️ Reply GENE

📝 Ashish Sharma said:

The Gespac VIG-4W 9340 video board unit is not functioning and needs attention from the maintenance team. — Purchase or Repair:

➡️ Reply Gespac

📝 Shrikant Bedarkar said:

Hey there, I need a quick update on what happened with the GENE GENE-5315 Rev A1.0 1907531502 CPU Board that caused downtime. Can you provide me with a short explanation regarding the issue and when it occurred? Thanks! — Purchase or Repair:

➡️ Reply GENE

📝 uffelmann said:

Hello, could you please provide repair information for GENE-5315 Rev A1.0 1907531502 CPU Board? It stopped working and we need a replacement urgently. Thank you. — Purchase or Repair:

➡️ Reply GENE

📝 blade-studentKl said:

Im reaching out about the GENE GENE-5315 Rev A1.0 1907531502 CPU Board which caused downtime. Can you please provide details on what went down and when it happened? Need to address the issue before the next shift. — Purchase or Repair:

➡️ Reply GENE

📝 BOEUF said:

The GENE GENE-5315 Rev A1.0 1907531502 CPU Board is exhibiting unusual behavior. It is not functioning as it normally does. — Purchase or Repair:

➡️ Reply GENE

📝 Uggah said:

the GENE GENE-5315 Rev A1.0 1907531502 CPU Board went down during the night shift. Need to check and troubleshoot it first thing in the morning. Thanks! — Purchase or Repair:

➡️ Reply GENE

📝 Kubly said:

Hello, I hope this message finds you well. I am inquiring about the GENE GENE-5315 Rev A1.0 1907531502 CPU Board that needs to be fixed or replaced. Are you able to repair it, or should I look into purchasing a new one? Trying to check this off my to-do list. Thank you. — Purchase or Repair:

➡️ Reply GENE

📝 Rafael Angel said:

Hello, we have a GENE-5315 Rev A1.0 1907531502 CPU Board that needs repair. Can you provide repair information or recommend a repair shop we can contact? Appreciate your quick response. Thank you. — Purchase or Repair:

➡️ Reply GENE

📝 cove said:

The GENE-5315 Rev A1.0 1907531502 CPU Board is exhibiting abnormal behavior in the warehouse. It is not functioning as expected, displaying unusual actions. — Purchase or Repair:

➡️ Reply GENE

📝 Hartoog said:

the GENE GENE-5315 Rev A1.0 1907531502 CPU Board unit went down mid-shift. Need to check and fix it ASAP to avoid any further disruptions. Thanks! — Purchase or Repair:

➡️ Reply GENE

📝 Melenos said:

Hello, I am interested in the GENE GENE-5315 Rev A1.0 1907531502 CPU Board but I am unsure if its the right model. Can you provide information on pricing and availability? I am looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply GENE

📝 Ken Fether said:

Equipment down with GENE GENE-5315 Rev A1.0 1907531502 CPU Board. Error code Unknown. Need urgent repair assistance. — Purchase or Repair:

➡️ Reply GENE

📝 Pete Thomas said:

Could you please confirm if the Gespac VIG-4W 9340 is still supported or if replacement parts are available for this older video board unit? — Purchase or Repair:

➡️ Reply Gespac

📝 Theresa said:

Hello, Im inquiring about the GENE GENE-5315 Rev A1.0 1907531502 CPU Board. My client is experiencing issues with it and they are looking for repair services. Can you please provide more information on how to proceed with troubleshooting and potential repairs? Thank you. — Purchase or Repair:

➡️ Reply GENE

📝 Paulson said:

The Gespac VIG-4W 9340 video board is giving a constant Error Code 301. Its affecting the entire video output, no signal on the monitor. Please advise on troubleshooting steps or repairs needed ASAP. — Purchase or Repair:

➡️ Reply Gespac

📝 Dennis Hoffert said:

The GENE-5315 Rev A1.0 1907531502 CPU board in unit X went down mid-shift. Please investigate and repair in the morning. Thank you! — Purchase or Repair:

➡️ Reply GENE

📝 Enrique G said:

The unit labeled GENE-5315 Rev A1.0 1907531502 is a CPU Board, but Im still learning about it. It isnt functioning properly at the moment. — Purchase or Repair:

➡️ Reply GENE

📝 Idzal said:

The GENE-5315 Rev A1.0 1907531502 CPU Board is not working and needs attention. — Purchase or Repair:

➡️ Reply GENE

📝 Pawel Poborca said:

Hello, I am reaching out on behalf of my client who is experiencing issues with their General Electric VMIVME3122 VME SINGLE BOARD COMPUTER. The specific description of the problem is currently unknown. Could you please provide more information or guidance on how to troubleshoot and repair this board? Thank you.— Purchase or Repair:

➡️ Reply General Electric

📝 Hugo Torres said:

Urgent Maintenance Issue with General Electric 531x306lccbbg1Dear Maintenance Team,I am writing to report a critical issue with the General Electric 531x306lccbbg1 unit that caused unexpected downtime on . Unfortunately, the specific nature of the problem is currently unknown, leading to a disruption in our operations.As the next shift is approaching, I urgently seek assistance from our maintenance experts to quickly diagnose and rectify the issue to ensure smooth operations going forward. Your— Purchase or Repair:

➡️ Reply General

📝 Jari Aho said:

Your GE Fanuc IC695CPU310CA-EL is experiencing an issue where the RX31 CPU is not functioning properly. The unit fails to power on or execute commands, indicating a potential internal malfunction. Repair service is recommended to diagnose and address the problem. If the units value is high, the estimated replacement cost could be significant.To resolve the issue with your GE Fanuc IC695CPU310CA-EL, a technician will need to investigate the malfunctioning RX31 CPU and perform the necessary repairs. Contacting a professional repair service provider specializing in GE Fanuc units would be advisable to properly address the problem and restore the functionality of your unit.— Purchase or Repair:

➡️ Reply Ge Fanuc

📝 T Last Product Sourcing Agencu said:

Hi, we have a client with a faulty Gepruft door module, he has sent it to a repair agent in the UK but they say it is too damaged to repair.We cannot find a replacement in the UK and would like to ask if you can supply replacement units? If you can, or can suggest an alternate option we would be pleased to hear from you.If you could give this your urgent attention we would be very grateful.Kind regardsT. Last— Purchase or Repair:

➡️ Reply Gepruft

📝 Jaime Sida said:

Hello, Im interested in the GE Fanuc IC600CB514L Programmable Controller Card. Could you please provide me with information on pricing and availability? Im desperately trying to source one quickly. Thank you.— Purchase or Repair:

➡️ Reply GE Fanuc

📝 Jose Luis Almeida said:

Inquiry Regarding GENERAL ELECTRIC IS215ACLAH1AL FA/05 BoardHello,I am reaching out on behalf of a client who is experiencing issues with their GENERAL ELECTRIC IS215ACLAH1AL FA/05 Board. Unfortunately, we dont have detailed information about the problem at the moment. Could you please provide us with any insights or troubleshooting steps that we can pass along to assist our client in resolving the issue?Thank you for your attention to this matter.Best regards,— Purchase or Repair:

➡️ Reply General Electric

📝 erling johannsen said:

Repair Information Request for General Electric 169c2770g2Hi ,I am reaching out on behalf of a colleague who is in need of repair information for a General Electric 169c2770g2. They mentioned that something stopped working, but the exact issue is unknown. We are trying to assist them in finding a replacement part or getting it repaired. Any insights you could provide would be greatly appreciated.Thank you for your— Purchase or Repair:

➡️ Reply General

📝 jarmo said:

the GEC Alsthom 41Y4J76/10 B unit went down mid-shift. Needs attention ASAP. Cheers!— Purchase or Repair:

➡️ Reply GEC Alsthom

📝 Carl Faessler said:

Im looking to replace a small transformer:Info on transformer.WN 0942240-35114.99.1311 -045Gepruft:03.J MSMAlso on the side of the transformer ( PBV6826/bh )Primary voltage : 230VSecondary voltage : 11 V and 18 V If you need , I can send you a picture.Im looking to replace it , Need price and availibilityThank you— Purchase or Repair:

➡️ Reply Gepruft

📝 davinder said:

Hello, we are in urgent need of repair information for the GENERAL ELECTRIC IS200VTURH1BAA VTCCH MARK VI THERMOCOUPLE CARD as it suddenly stopped functioning. We are unable to locate a replacement and require assistance ASAP. Kindly provide repair details at your earliest convenience. Thank you.— Purchase or Repair:

➡️ Reply General Electric

📝 Leigh said:

Hi, I am inquiring about the GE Fanuc board with part number A20B-2900-310/03A. My client is experiencing issues with it and would like to get more information on repairs or replacements. Thank you.— Purchase or Repair:

➡️ Reply GE Fanuc

📝 TESSITURA PARDI SRL said:

GOOD AFTERNNON,WE ARE LOOKING FOR AN ELECTRONIC CARD USED ON SHUTTLE LOOM .IT IS THE ARTICLE LF-4 000057CAN YOU LET US KNOW IF YOU HAVE IT?THANK YOU SO MUCHBEST REGARDS,TESSITURA PARDI SRL

➡️ Reply Gebruder Loepfe

📝 dwyer said:

Hello, we have a client with a GE Fanuc IC200GBI001 interface module remote I/O Genius Network that requires repair. Can you provide more information on the services you offer for this type of unit? Thank you.— Purchase or Repair:

➡️ Reply GE Fanuc

📝 Harriman said:

GE Fanuc IC600CB500D IssueHi,I was informed that the GE programmable controller card IC600CB500D is not functioning properly. Kindly assist in troubleshooting or servicing the unit.Thank you.— Purchase or Repair:

➡️ Reply GE Fanuc

📝 patric said:

Can the Ge Fanuc IC200ALG630-EC ANALOG INPUT THERMOCOUPLE be repaired or bought? Im trying to check this off my to-do list.— Purchase or Repair:

➡️ Reply Ge Fanuc

📝 Carlos Lazo said:

We experienced downtime due to a malfunction in the GE Fanuc IC800SLA0102B SL Series Servo Drive during the previous shift. Can you please provide a brief explanation of what happened and when the issue occurred? Trying to resolve this before the next shift comes in. Thank you.— Purchase or Repair:

➡️ Reply GE Fanuc

📝 kiran said:

General Electric 5PY59JY1 SS TRIP DEVICE Issue ReportDear Repair Shop,I am writing to report a recurring issue with the General Electric 5PY59JY1 SS TRIP DEVICE. This unit has been returned or reported multiple times, but the specific problem or description is unknown from our end. According to our records, the same unit continues to be problematic. Please investigate further and provide a detailed assessment of the issues encountered with this device.Thank you for your attention to this matter.Sincerely,Inventory Manager— Purchase or Repair:

➡️ Reply General Electric

📝 Pedro Bello said:

GE Fanuc IC752BDT100-BA Operator Interface drive/board failure, needs immediate replacement. NOTIFY supervisor ASAP for further action.— Purchase or Repair:

➡️ Reply GE Fanuc

📝 Mauro Aragno said:

IC670ALG320J unit malfunctioned mid-shift. Needs assessment and repair. Please follow up during the day. - Night Shift Maintenance Crew— Purchase or Repair:

➡️ Reply General Electric

📝 Bill Nelson said:

Can the Georg 601591 Rack Power Supply be repaired or bought? Im trying to check this off my to-do list.

➡️ Reply Georg

📝 Ben Hur Aguinaldo Jr. said:

The GE Fanuc IC697CMM742-LL is not working properly. Maintenance team needs assistance.— Purchase or Repair:

➡️ Reply GE Fanuc

📝 Singletary said:

Hello, could you please provide information on repairing the General Electric DS215UCIBG3AZZ5 EXT ANALOG BOARD? Its not functioning and we need a replacement. Thank you for your assistance.— Purchase or Repair:

➡️ Reply General Electric

📝 Pijnenburg said:

Hello, Im interested in purchasing the GE Fanuc IC600CB516F Programmable Controller Card. Could you please provide me with information on the pricing and availability of this unit? I am looking to source one quickly. Thank you.— Purchase or Repair:

➡️ Reply Ge Fanuc

📝 Shanthi said:

The Gec-Alsthom RTS5104-301 unit in the warehouse is displaying abnormal behavior. It is not functioning as it normally does, and the specific issue or name of the behavior is unknown at this time.

➡️ Reply Gec-Alsthom

📝 Michaelclolo said:

Hi there, we have a General Electric 531x301dccafg2 that stopped working and we need a replacement. Can you please provide repair info or suggest a suitable replacement part? Urgent! Thank you.— Purchase or Repair:

➡️ Reply General Electric

📝 NISAR said:

The General Electric IC670MDL930J unit has malfunctioned and needs attention. Please investigate and address the issue— Purchase or Repair:

➡️ Reply General Electric

📝 Xavier PEna said:

The unit isnt working.— Purchase or Repair:

➡️ Reply General

📝 Barry Krentz said:

Hello, I just wanted to check if the Getronik 05130 power supply can be repaired or if it needs to be replaced. Im trying to get this off my to-do list. Thank you.— Purchase or Repair:

➡️ Reply Getronik

📝 simon Jackson said:

I need assistance with my Generalelectric 531x211kldacg1 unit. Its displaying an unknown description and needs immediate repair. Please let me know if you can help.

➡️ Reply Generalelectric

📝 Lu said:

We experienced downtime due to issues with the Generalelectric IC693APU300H unit during the night shift on October 12th. Please provide a quick update as the next shift approaches. Thank you.

➡️ Reply Generalelectric

📝 Jaap said:

The Ge Fanuc IC600YB948K unit went down during the night shift. Please check and fix it during the day shift. Thanks!— Purchase or Repair:

➡️ Reply Ge Fanuc

📝 RON KERR said:

: To best assist you with your industrial electronics problem, could you please tell me:1) Have you tried servicing the unit yourself? If so, what have you done already to diagnose the issue?2) Is there a manual available for this unit that covers troubleshooting and repair procedures? If so, where can I find it?:— Purchase or Repair:

➡️ Reply Ge Procond Elettronica

📝 mladen fagus said:

The Generalelectric Ic2800y101a3 unit isnt working. The issue is currently unknown. Thank you for looking into it.

➡️ Reply Generalelectric

📝 alsahir said:

Having issues with my GE Fanuc IC610CHS114A. Seems like the power supply 24VDC might be faulty. Need a technician to look into it ASAP.— Purchase or Repair:

➡️ Reply GE Fanuc

📝 Ben Rottinghaus said:

Im experiencing some issues with the Generalelectric Ds200slccg1f machine, but Im not quite sure whats wrong with it. Something seems to have stopped working.

➡️ Reply Generalelectric

📝 Calder said:

Issue with General Electric DS6800CCIC1F1C / DS600CCIE1E1D Field Ground Fault Detector - drive or board failure. Prioritize repair/replacement.— Purchase or Repair:

➡️ Reply General Electric

📝 Kara Willis said:

Board IC600BF808C failed. Need replacement ASAP. Fix in progress.— Purchase or Repair:

➡️ Reply Ge Fanuc

📝 Tammy Vineyard said:

Machine displaying error code 161 - requires immediate resolution.

➡️ Reply Gefanuc

📝 Molaison said:

We need assistance with the Ge Fanuc IC600BF915C programmable controller card as our unit is still down. Please reply— Purchase or Repair:

➡️ Reply Ge Fanuc

📝 Mahmood said:

Im currently experiencing some issues with the Ge Fanuc TGT-S00N-1-1-CA SERVO MODULE. It seems like something has stopped working, but Im not entirely sure what it does. Any assistance or information would be greatly appreciated.— Purchase or Repair:

➡️ Reply Ge Fanuc

📝 akbari said:

I urgently need assistance with my GE AK025C3F0602 DRIVE. It is still down. Please reply— Purchase or Repair:

➡️ Reply GE

📝 Salvesen said:

Could you please confirm if the Ge Fanuc A02B-0120-C131 Series 18-T Operator Interface is still supported? Im looking for replacement or repair options and wondering if parts are still available for this unit. Thank you.— Purchase or Repair:

➡️ Reply Ge Fanuc