Welcome to Ird Mechanalysi

We repair a wide range of Ird Mechanalysi Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Fair Estimates
• Low Prices

No repair summaries available yet for this manufacturer.

Comments for Ird Mechanalysi

📝 Visalia Electric Motor Shoop said:

We have a model# 345 IRD Mechanalysis Balancer and we need to have it repaired. Do you repair these machines.Please let me know.Lisa Woodhouse

➡️ Reply Ird Mechanalysis

📝 Craig Jackson said:

I need an operating manual for an IRD Mechanalysis Model 345. Can I get one scanned and emailed as a PDF file?

➡️ Reply Ird Mechanalysis

📝 ANAS said:

DEAR I NEED A MANUAL BOOK OG IRD MECHANALYSIS WITH MODEL 880. BECAUSE I HAVE A IRD MECHANALYSIS BUT NO MANUAL BOOK. I NEED THE LESSON ABOUT THE BASIC OF VIBRATION MODULE 1 AND MODULE 2. I NEED IT FOR LEARNING ABOUT VIBRASTION..THANKYOU

➡️ Reply Ird Mechanalysis

📝 Anas effendi said:

NEED A MANUAL BOOK OG IRD MECHANALYSIS WITH MODEL 880. BECAUSE I HAVE A IRD MECHANALYSIS BUT NO MANUAL BOOK. I NEED THE LESSON ABOUT THE BASIC OF VIBRATION MODULE 1 AND MODULE 2. I NEED IT FOR LEARNING ABOUT VIBRATION..THANKYOU

➡️ Reply Ird Mechanalysis

📝 mohit bansal said:

SIR WE ARE USING IRD MECHANALYSIS 880 MODEL HERE IN NTPC AURAIYA. BUT NOWDAYS IT IS GIVING PROBLEM WHILE CHARGING. SO PLEASE PROVIDE ME REPAIR MANUAL SO THAT WE CAN REPAIR OUR EQUIPMENT

➡️ Reply Ird Mechanalysis

📝 ertac hurdogan said:

DEARI NEED A MANUAL BOOK Of IRD MECHANALYSIS WITH MODEL 246. BECAUSE I HAVE A IRD MECHANALYSIS BUT NO MANUAL BOOK. THANKYOU

➡️ Reply Ird Mechanalysis

📝 cristian ghita said:

. Data processing (diagnosis) with Amethist 1.01 program- data were taken over from the data collector 890 IRD Mechanalysis(England). Operating the data collector 890, model7090 PMP software, according to ISO 2372.

➡️ Reply Ird Mechanalysis

📝 Jose Sanchez said:

necesito por favor el manual de usuario de este modelo ird 880 mechanalysis, en espanol

➡️ Reply Ird Mechanalysis

📝 Carlos Eduardo Franco said:

Dear sirs:Please send me information and operation manual of IRD 345 mechanalisys.Very truly yours,carlos Eduardo Franco G.MECHANICAL ENGINEER

➡️ Reply Ird Mechanalysis

📝 ISAAC SINYANGWE said:

We are currently using Model 290 IRD (c) 1998 Mechanalysis Balancer and we are in a position of not knowing what to do with the machine whether to have it repaired or only calibration is required.This is what we are experiencing:-the machine is not responding to the weights initially indicated as requiredthe machine is not giving the actual speed.

➡️ Reply Ird Mechanalysis

📝 Roberto Perez said:

Hi: I am looking for a company that: First , I can send my IRD DATA LINe to be repair.Second: I need a new set of cables for IRd Fast trackThird: I need a chip for IRD Fast track DC_DC_ converter (dip371515db)part # IRD 35109.Do you service this equipmnet (data line) and do you sell chip and cables?Can you help me with these? If you do how do handle this, you need credit card, check, etc.Please let me know if you can help me. You can e-mail me or call at the above phone.Thank you very much for any help you can give me!Roberto Perez.

➡️ Reply Ird Mechanalysis

📝 NARONG SIRIWATTANAWONG-SAKUL said:

We have this part for IRD FAST TRACK

➡️ Reply Ird Mechanalysis

📝 John Richards said:

I have a vizio tv with a broken cable conecting the screen to the video buffer board, this cable has a chip on it .the chip is good . can you repair it?

➡️ Reply Ird Mechanalysis

📝 Locklear said:

Looking for a Prom Board ASM IRD Part # 24144 fro the above Monitor

➡️ Reply Ird Mechanalysis

📝 JAYARAJAN.C.N said:

Hello, We are using the above model for three 130MW units in Moolamattom. Now we are suspecting some problems in some channels. We hope you will send your offer via my email.Regards,Jayarajan.C.N,Exceucutive Engineer,Generation Circle,KeralaState Electricity Board,Moolamattom -685589,Kerala, India.

➡️ Reply Ird Mechanalysis

📝 Saul Bonilla said:

HelloWe are using the Model 5806 and only work a channel ( channel one)We Hope your offer .RegardsSaul BonillaEnee, HondurasPhone 26605706

➡️ Reply Ird Mechanalysis

📝 Saul Bonilla said:

HolaNecesito la reparacion de un monitor model 5806 de IRD MECHANALYSIS, no aparece nda en displey , no funciona nada.Ing. Saul BonillaENEE, Honduras.

➡️ Reply Ird Mechanalysis

📝 paul J. Guay said:

Units digitol output stuck on 00 does not scan

➡️ Reply Ird Mechanalysis

📝 Dennis Dixon said:

Please advise if you can supply 2 only rebuilt or repaired IRD model 5806 vibration monitorAwaiting your reply Thanks, Dennis

➡️ Reply Ird Mechanalysis

📝 saul bonilla said:

helloI have a ird 5806 it need repair.you can it ?

➡️ Reply Ird Mechanalysis

📝 W. Makaruk said:

Dear Sirs,I have bought an used Fast Track analyser from an ebay seller.I am looking for a on operating software for this device, more specifically, the memory of the analyser had been reseted before and i look for the programms that can be played into the analyser that are: data collection, balancing, and the software package COASTDN for the start runs.Please inform me if you could send us files that we can than played onto the device (we have the software that can do it). Please make us an offerBest Regards.W. Makaruk

➡️ Reply Ird Mechanalysis

📝 Benjamin Villegas said:

Hi, i have the files to load the os to the fast track, any version and the balancing and cost down program. my mail is cbdservicio@hotmail.com contact to me.

➡️ Reply Ird Mechanalysis

📝 James M Gradick said:

I need Cleaning/Calibration/Certification (ISO NIST) Tracible, for my IRD Fast Track Data Collectors. OS Download and Balancing/Coast Down program. Is that something you do?

➡️ Reply Ird Mechanalysis

📝 miguel bustillos calvo said:

recently acquire an ird balancing system model fast track, machine/instrument serial # 9311552, it was provide with your respective computer software.it was installed in my computer but when it runs appears the next messageird mechanalysis data analysis sistemwelcome to the ird7090 v.2.03oct 1989north america english versionand appears the next error...FCB NO DISPONIBLEanular, error ?end of file found unexpectedlycalled from C:IRD0DEV.PRGline number 00106END RUN DBRUNplease i need your help in order to correct this error and to make use of this software...i wait for your reply...thanks...miguel bustillos c.

➡️ Reply Ird Mechanalysis

📝 rick gatchell said:

looking for spares for this unit or direct replacements

➡️ Reply Ird Mechanalysis

📝 Carlos Dominguez said:

1. How do I adjust the contrast on the Fast Track screen.2. We have Emonitor Odyssey. I could load the Fast Track Operating System, but how do I load the balancing program and the Startup-Coastdown programs.

➡️ Reply Ird Mechanalysis