Welcome to Jandy

We repair a wide range of Jandy Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Free estimate with an approved repair
• Practical owner-operated pricing
• Purchase orders and Net 7–30 terms for approved business accounts

Send the model and part number with a description of the failure for a repairability review.

Comments for Jandy

📝 Johnny Almeida said:

Jandy PCB 7588C not activating heater control function. Need assistance with troubleshooting and repair.— Purchase or Repair:

➡️ Reply Jandy

📝 ISIDRO said:

The Jandy PCB # 8124A experienced a malfunction, leading to unexpected downtime. This occurred earlier today during the morning shift. Could you please provide a quick analysis and solution before the next shift begins? Thank you. — Purchase or Repair:

➡️ Reply Jandy

📝 hussain m.g said:

My Jandy 8124A 8125B pool control board is not responding properly - the display is blank and none of the controls seem functional. Need immediate repair assistance, as this is impacting our pool operations. — Purchase or Repair:

➡️ Reply Jandy

📝 Brian Sagan said:

The Jandy 8124A 8125 Spa Controller is malfunctioning, causing a halt in our production line. We urgently need the repair service to address this issue immediately to ensure smooth operations. — Purchase or Repair:

➡️ Reply Jandy

📝 Coker said:

the Jandy 8124A 8125B pool control board unit went down during the night shift. Needs attention ASAP. Thanks! — Purchase or Repair:

➡️ Reply Jandy

📝 Suresh Chandra Sharm said:

the Jandy PCB#8124A 8125 pool controller went down mid-shift. Please check it out first thing in the morning. Thanks! — Purchase or Repair:

➡️ Reply Jandy

📝 madan kumar .A said:

Do you have a Jandy PCB#8124A 8125 pool controller available for sale or repair? Need to keep production running. — Purchase or Repair:

➡️ Reply Jandy

📝 Doreen Rogers said:

The Jandy PCB#8124A 8125 pool controller is displaying the error code ERR 24. Pool equipment is currently non-operational. Please advise on next steps for troubleshooting and repair. — Purchase or Repair:

➡️ Reply Jandy

📝 hadi shahbazi said:

the Jandy 8124A 8125 spa controller is down. Needs attention ASAP. Check it out in the morning. Thanks! — Purchase or Repair:

➡️ Reply Jandy

📝 Adrian Younger said:

Please provide an update on the status of the Jandy PCB # 8124A. The unit is still down and we need immediate assistance. — Purchase or Repair:

➡️ Reply Jandy

📝 KEITH PHELPS said:

Hello, Im interested in purchasing a Jandy 8124A 8125 Spa Controller. Could you please provide me with information on pricing and availability? Im looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Jandy

📝 PRAT YVES said:

Hello, Im interested in purchasing a Jandy PCB # 8124A. Could you please provide me with the pricing and availability of this model? I am trying to source one quickly and would appreciate your — Purchase or Repair:

➡️ Reply Jandy

📝 Edgar said:

Do you have a Jandy 8124A 8125 Spa Controller available for sale or repair? The unit has stopped working and I need to get production back up and running quickly. — Purchase or Repair:

➡️ Reply Jandy

📝 Han Park said:

The Jandy PCB#8124A 8125 pool controller is not working. — Purchase or Repair:

➡️ Reply Jandy

📝 karen drew said:

Hi there, the Jandy PCB # 8124A is displaying an error code ERR 05 and the unit is not powering on. Please advise on the next steps. Thanks. — Purchase or Repair:

➡️ Reply Jandy

📝 CROWLEY said:

Hello, I am interested in purchasing the Jandy 8124A 8125B pool control board. I am unsure if this is the correct model, but my team suggested I inquire about pricing and availability. I need to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Jandy

📝 Harald said:

Hello, we are in need of repair info for a Jandy 8124A/8125 spa controller. Can you please provide guidance on getting a replacement or repairing the unit? Thanks! — Purchase or Repair:

➡️ Reply Jandy

📝 Vinnie Tortorich said:

Hello, Im reaching out regarding the Jandy 8124A 8125 Spa Controller that my client needs assistance with. They are experiencing some issues with it. Could you please provide some information on potential repairs or troubleshooting steps? Thank you. — Purchase or Repair:

➡️ Reply Jandy

📝 Karen S. Dunn said:

Hello, Im interested in purchasing the Jandy 8124A 8125B pool control board. Im not entirely sure if this is the correct model, but my team suggested I reach out to inquire about pricing and availability. I need to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Jandy

📝 PIER said:

We experienced downtime due to an issue with the Jandy PCB #8124A. The problem occurred today during the evening shift. Can you provide assistance? — Purchase or Repair:

➡️ Reply Jandy

📝 andres felipe grisal said:

Could you please verify if the Jandy 8124A 8125B pool control board is still supported or if replacement parts are available for it? Thank you. — Purchase or Repair:

➡️ Reply Jandy

📝 Jacques Mura said:

We experienced downtime with the Jandy PCB#8124A 8125 pool controller unit. It occurred earlier today during the morning shift. Could you please provide some insight into what might have caused this issue? Thank you! — Purchase or Repair:

➡️ Reply Jandy

📝 Alexannder said:

The Jandy PCB#8124A 8125 for the pool controller is malfunctioning, causing delays in production. Please address this issue urgently to ensure operations can resume smoothly. — Purchase or Repair:

➡️ Reply Jandy

📝 Leonard Goodson said:

Hello, I am inquiring about the Jandy PCB # 8124A. Our team is looking to find out if this unit is still supported or if replacement parts are available for it. Thank you. — Purchase or Repair:

➡️ Reply Jandy

📝 araya said:

just a heads up that the Jandy PCB#8124A 8125 in the pool controller is down. Need to replace it pronto to keep things running smoothly. — Purchase or Repair:

➡️ Reply Jandy

📝 Walton said:

Jandy 8124A 8125B Pool control board not responding to inputs or displaying any information. — Purchase or Repair:

➡️ Reply Jandy

📝 Rafael Angel said:

We are experiencing a critical issue with the Jandy 8124A 8125 Spa Controller. The device is malfunctioning, causing a significant disruption in production. Immediate repair service is urgently needed to restore functionality and minimize downtime. Please prioritize this issue for swift resolution. — Purchase or Repair:

➡️ Reply Jandy

📝 Segal said:

The Jandy 8124A 8125 Spa Controller is showing error code E02 and is not responding to any commands. Please advise on troubleshooting steps. Thank you. — Purchase or Repair:

➡️ Reply Jandy

📝 Naser said:

The Jandy PCB #8124A is showing error code E05 and the heater is not turning on. Please advise on next steps to troubleshoot and resolve the issue — Purchase or Repair:

➡️ Reply Jandy

📝 habaqwe said:

Hello, my client is having issues with a Jandy PCB#8124A 8125 pool controller. Can you please provide information on possible solutions and repair options? Thank you. — Purchase or Repair:

➡️ Reply Jandy

📝 Gromling said:

One of the Jandy PCB # 8124A boards failed. No description available, currently moving between machines. — Purchase or Repair:

➡️ Reply Jandy

📝 Stecker said:

Hi, Im inquiring about repairing or replacing the Jandy PCB#8124A 8125 pool controller. Can it be fixed or bought as a replacement? Im trying to complete this task on my to-do list. — Purchase or Repair:

➡️ Reply Jandy

📝 boydayaveno said:

The Jandy 8124A 8125 Spa Controller unit is not functioning normally and is exhibiting strange behavior. — Purchase or Repair:

➡️ Reply Jandy

📝 Elimir said:

Can the Jandy PCB#8124A 8125 pool controller be repaired or purchased? Trying to check this off my to-do list. — Purchase or Repair:

➡️ Reply Jandy

📝 sugeng hariyadi said:

Jandy PCB#8124A 8125 pool controller malfunctioned. Need to troubleshoot ASAP and replace drive or board. — Purchase or Repair:

➡️ Reply Jandy

📝 Rafael said:

Do you have a Jandy 8124A or 8125B pool control board available for sale? The unit went down and we need to get production running ASAP. Thank you. — Purchase or Repair:

➡️ Reply Jandy

📝 Donald Fellwock said:

Can the Jandy 8124A 8125 Spa Controller be repaired or bought? Im trying to check this off my to-do list. — Purchase or Repair:

➡️ Reply Jandy

📝 Eagan said:

The Jandy PCB # 8124A unit is not functioning as usual. It is exhibiting strange behavior, but I am unable to provide a specific description. — Purchase or Repair:

➡️ Reply Jandy

📝 Jack Carswell said:

the Jandy 8124A 8125 spa controller went down mid-shift. Need someone to check it out and follow up. Thanks! — Purchase or Repair:

➡️ Reply Jandy

📝 Hans-Peter Schöpperle said:

Hello, I am reaching out on behalf of my client regarding an issue with a Jandy PCB #8124A. The problem is described as having no description. Can you please provide information on how to troubleshoot and repair this? Thank you. — Purchase or Repair:

➡️ Reply Jandy

📝 John Beerman said:

Hello, Im interested in purchasing a Jandy 8124A or 8125B pool control board. Can you please provide information on pricing and availability? Im looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Jandy

📝 cooley said:

The Jandy PCB#8124A 8125 for the pool controller is malfunctioning, causing a halt in the production line. This issue needs immediate attention from the repair service to ensure minimal disruption and swift resolution. — Purchase or Repair:

➡️ Reply Jandy

📝 schryba said:

The Jandy 8124A and 8125B pool control boards have a critical issue affecting the line, resulting in malfunctioning units and delayed production. Immediate repair service is required to resolve the situation and restore functionality swiftly. — Purchase or Repair:

➡️ Reply Jandy

📝 Peter Hancock said:

Hey, we had an issue with the Jandy PCB #8124A unit during the night shift. Its currently down; please check and address it during the day shift. Thanks! — Purchase or Repair:

➡️ Reply Jandy

📝 Alshaijy said:

Jandy 8124A 8125 Spa Controller not responding. — Purchase or Repair:

➡️ Reply Jandy

📝 GOUDA said:

The Jandy 8124A 8125 spa controller experienced a malfunction today, causing downtime from 1030 AM to 1145 AM. Please provide a quick answer regarding what went wrong before the next shift begins. Thank you. — Purchase or Repair:

➡️ Reply Jandy

📝 Robert Wise said:

Having issues with my Jandy Industries RS4 pool control panel. Need a professional to assess and repair it as soon as possible. Thank you.— Purchase or Repair:

➡️ Reply Jandy Industries

📝 presswala said:

Hello, Im reaching out on behalf of a client in need of assistance with a Jandy Industries 6473-E controller. They are experiencing issues with it and would like to know how to proceed with repairs. Thank you.— Purchase or Repair:

➡️ Reply Jandy Industries

📝 Bert said:

JANDY INDUSTRIES CONTROL PANELPCB# 6473-E ASSEMBLY #6475-NIt is located in my garage & went black screen over night yesterday. It was new when replaced June 2025. The main control panel next to my pool equipment was replaced new at the same time and it is working as normal. My iAqualink wifi control is also working as normal. How much to diagnose this control board? What have costs of repairs on this control board ranged in the past? Thank you!— Purchase or Repair:

➡️ Reply Jandy