We repair a wide range of K Equipment.
Ask questions, or 1-336-969-0110 for faster service.
Use the search bar above to find specific manufacturers.
The K Tron 9191-00051d is a high precision weighing controller designed for use in industrial manufacturing processes. It features advanced load cell technology, multi-language display options, and a user-friendly interface for easy operation. Typical failures may include faulty load cells, issues with the communication interface, or power supply problems. Regular maintenance and calibration are recommended to ensure optimal performance and accuracy.
The K Tron 9191-00000-k model is a high-precision industrial weighing controller used in manufacturing processes. It is designed to accurately measure and control the flow of materials in production lines, ensuring consistent and reliable output. This device features advanced digital signal processing capabilities, integrated communication interfaces for seamless integration into automation systems, and a user-friendly interface for easy configuration and monitoring. Common failures in the K Tron 9191-00000-k model include communication errors due to faulty interface connections, power supply issues leading to erratic behavior, and sensor malfunctions resulting in inaccurate measurements. Regular maintenance and calibration are recommended to prevent these failures and ensure optimal performance.
The K Tron 9191-30316 is a specialized industrial electronic device used for material handling processes, particularly in the field of conveyor belt systems. This module is equipped with advanced sensor technology, enabling precise measurement and control of material flow rates. Typical failures observed in this model include sensor malfunctions, communication errors, and power supply issues. Regular maintenance and calibration are essential to ensure optimal performance and reliability of the K Tron 9191-30316 in industrial applications.
The K Tron 9184-601370 is a precision industrial weighing controller used in manufacturing processes to ensure accurate and consistent material feeding and batching. It features high-speed digital signal processing for real-time weight monitoring, advanced communication capabilities for integration with other systems, and user-friendly interfaces for easy operation and calibration. Common failures include software glitches leading to inaccurate weight readings, power supply issues causing intermittent operation, and communication errors resulting in data transfer failures. Regular maintenance and calibration are essential to ensure optimal performance and accurate weight control.
The K Tron 2403-607100-b is a high-precision industrial electronic weighing system commonly used in applications such as filling, batching, and check weighing. This device features a robust design with high accuracy and reliability, making it suitable for use in various industrial settings. Typical failures of the K Tron 2403-607100-b may include issues with load cell calibration, communication errors between the controller and peripheral devices, power supply malfunctions, or software glitches. Regular maintenance, calibration checks, and troubleshooting of these components can help prevent and address such failures effectively.
The K-Tron UKN model is an industrial electronic device used for process control and automation in various industries. It is designed to accurately monitor and control the flow of materials such as powders, granules, and bulk solids. Features of the K-Tron UKN model include a robust construction that can withstand harsh industrial environments, precise feeding capabilities with high accuracy, and the ability to handle a wide range of materials at different feed rates. Typical failures of the K-Tron UKN model may include issues with the motor or drive system, malfunctioning sensors or control units, and wear and tear on feeding components leading to inconsistencies in material flow. Regular maintenance and calibration are important to prevent and address these common failures.
The K Tron 2401-70000 is a high-performance industrial electronic weighing system commonly used in material handling applications. It features advanced precision and accuracy in weight measurement, making it ideal for controlling and monitoring bulk material flow. However, common failure issues with this model include sensor malfunctions, wiring problems, and calibration errors, which may require troubleshooting and repair by an experienced technician.
Dear Sir, We would like to contact KML Elektronik. but we do not know their contact number such as e-mail address.... if you know, please let me know. Thank you for your help! missy from Japanβ‘οΈ Reply Kml Elektronik
Dear SirWe have in our possession the following I/O cards installed on a Workhorse Alarm Monitoring system on board our subject vessel.Kindly advise if you have the means to troubleshoot and repair these old cards.two pcs WH-D11-16 PC7472,14144 , this one does not complete the scan cycle (the orange light is not lit)one pc WH-AEX-16 PC7392 14145two pc WH-PCDB-ISO PC7362 14156 REV 2Your prompt reply will be highly appreciated.With Kind regardsK. Karathanosβ‘οΈ Reply Keithley
I am trying to refurbish a kew 1502v-66 power washer. I cannot get the oil fired burner to kick on. The control panel has a digital temp gauge and it shows the temperature of the water at its maximum value when the water is cold. I am in question if this is the problem with the burner not firing. I am interested in any electrical diagrams, service manuals, or tech suggestions that you have. Thanks, Josh.β‘οΈ Reply K.E.W.
All the lights on the temp gauge lit means that the fuel tankis empty. If there is fuel in the tank, there may not be enoughto activate the tank sensor. put more fuel in.If the tank is full,the tank sender is faulty. It will need replacing.In the meentime you can bypass the tank sender by shorting out the two wires. Follow the cable up from the diesel tank up to the circuitboard inside the electrics box.cut the two wires that go to the circuit board and strip of insulation. Twist these wires togetherand this should solve the problem. If not, Either the board isknackered or the temperature sensor is knakered. The temperature sensor is located underneath the boiler on the water outlet andshould have a red wire coming of it up to the circuit board.Remove these 2 wires from the curcuit board and measure theresistance between these wires.It should measure around 500 ohmsat room temperatre. If not it requires replacing.You can Temporaryiliybypass the temperature sensor by repacing it with a 500 ohms resistor,any problems or if you need any parts email me regards.β‘οΈ Reply K.E.W.
My KEW 1502v-66 is smoking badly and does not get hot. I think the diesel is not burning right. There is a blue flame between the contacts.β‘οΈ Reply K.E.W.
clean out the disel jet, clean out fillter under the fan, make sure u have good tight flexi hose connection, good luckβ‘οΈ Reply K.E.W.
The temprature regulator on the top of the washer is broken off next to the gauge i need a new partβ‘οΈ Reply K.E.W.
Is there anyway to get a takedown of the pump on my kew steam cleaner the model # 08022-56? A parts book would be good.β‘οΈ Reply K.E.W.
Hi there.I have A Kew steam cleaner model #0802v-56 And would like to see about getting these manuals for this cleaner . Please and thank you . Scottβ‘οΈ Reply K.E.W.
HelloI have a kew 1502 steam cleaner which has a problem with the burner. It will run for about 5 seconds then cut out, I have changed the diesel filter and cleaned the filter into the nozzle. Also I have checked that the electrodes are working properly. Its as if something is turning the diesel supply off. Do you have any ideas? Also can you supply pump seal kits and how much are these?Many thanks Richardβ‘οΈ Reply K.E.W.
Hi, put a oring kit in pump an still get only tap pressure everything looks good ,keyway on pump motor fine. any ideas. Thanks,β‘οΈ Reply K.E.W.
when i turn the machine on it trips the electrickβ‘οΈ Reply K.E.W.
Please can you help i have a kew 1502v it will run fine cold, as soon as i demand heat it runs for 5 seconds and switches off if you switch it on & off,it runs for 5seconds and it will do this all day. what is the solution pleaseβ‘οΈ Reply K.E.W.
Im looking for the maintenance manual for this machineβ‘οΈ Reply K.E.W.
Hi I have a KEW 1502v and some body stolen parts so I put all back together but for any reason it not working the heater and I suspected it about the wiring position, and the pressure is stopping and not keep spraying and some times work fine but some times not, one time I fix only with a new clamp in the feeder line from the tank to the pump and now I put a new hose and clamps but still the sameβ‘οΈ Reply K.E.W.
My kew steam cleaner does not have water pressure. It exits the gun but only trickles out. Can you help? Many thanksMarkβ‘οΈ Reply K.E.W.
i just got a used ke w scorpian steam cleaner and everything works exept it does not ignite or no spark to get flame.any idea.thankshassanβ‘οΈ Reply K.E.W.
How do i test the electrod or egniter to see its good?Thanksβ‘οΈ Reply K.E.W.
Hi, I have a KEW Steam Cleaner model 16A2V-66 Year 1986. I bought it from a company asset auction and never saw it working. I have now tried to use it and the temperature lights reached the temperature set once, then the burner went out and would not re-light. I dissconnected the fuel supply to the burner and no fuel was leaving the Danfoss pump. I had a full tank of fuel and checked the supply voltage to the solenoid of the Danfoss fuel pump and with the switch set to the the burner on position, there was no voltage going to the coil to open the outlet port of the pump. Please could anyone tell me what the safety systems are on this unit and what could stop the printed circuit board sending the voltage to open the solenoid valve of the pump to supply the fuel to the burner ?Thank you for your time.β‘οΈ Reply K.E.W.
Dear AllPlease give me the information about Services center KEW 0901V In indonesia , for your best cooperation i would to say many thanksβ‘οΈ Reply K.E.W.
Hi would you have a service manual for this cleaner??β‘οΈ Reply K.E.W.
DO YOU HAVE A SOLUTION FOR THE OIL VALVE FROM THE BURNERIT WILL NOT GO ON BY WORKING WITH THE MACHINEPRESSION KONTAKTS ARE OKEβ‘οΈ Reply K.E.W.
Looking for parts manual of help with parts for Unit Model #3803V-103 1985/40No.# 2104067 240v/1/30 ampAny help would be greatly appreciated.β‘οΈ Reply K.E.W.
call windy city equipment located in Elgin, Illinoisβ‘οΈ Reply K.E.W.
I need a service manual for a KEW 4503KB with exploded views, parts lists with prices... thank you for your time and help with this problem..Raymond Cooper951-926-5394β‘οΈ Reply K.E.W.
Can I find a manual ?I was given one of these to me by a customer. I think I need a special water hose??β‘οΈ Reply K.E.W.
I need a service manual with part numbers and specifacation please.β‘οΈ Reply K.E.W.
hi could you tell me where I would get service manual for kew 1640hathanks markβ‘οΈ Reply K.E.W.
i need to fix my pei kew 4503kb pumbe kit and throtecan you fix itthank youβ‘οΈ Reply K.E.W.
we cant get water flow through the machineβ‘οΈ Reply K.E.W.
need the service manual of KEW 01K pressure washerβ‘οΈ Reply K.E.W.
I need a operation manuel for K.E.W. 3803V-103β‘οΈ Reply K.E.W.
I need a operation manual for KEW 1502v-66β‘οΈ Reply K.E.W.
KEW 3803V-103 fuel pump is not delivering to the burner. Please either send a manual or advise. I will call for technical assistance 6/23/2011Thank you Carolyn S. ValdiviaJackson Drop Storage YardTruck & Trailer Repair517-795-1353β‘οΈ Reply K.E.W.
No fuel getting to burner, need manual for test procedure. Thank you, Brent C.β‘οΈ Reply K.E.W.
KEW 1502 V-66 user manual , service manualβ‘οΈ Reply K.E.W.
i need manual for kew 1640haβ‘οΈ Reply K.E.W.
I have Kew 1640h i need operating manual,β‘οΈ Reply K.E.W.
I am looking for a shop that carries replacement parts for a KEW pressure washer, the hose has sprung a leak and need to replace it the spray nozzle is also attached to the hose as a all in one unitβ‘οΈ Reply K.E.W.
Hi.I need reper manual for KEW royalBest regards Reidar Kvalvikβ‘οΈ Reply K.E.W.
my machine stop work hot water and pressure no good workβ‘οΈ Reply K.E.W.
Great machine, had since new, recently experiencing difficulties acquiring heat.Lots of kerosene, lots of pressure on cold, new fuel spray nozzle...Helpβ‘οΈ Reply K.E.W.
Hello. And Bye.β‘οΈ Reply K.E.W.
I am trying to find out any info on this Kew (0802v-56)steam washer. If someone has a manual available, that would be great.β‘οΈ Reply K.E.W.
I need a parts schematic so I could repair the pump I need the seals kit.β‘οΈ Reply K.E.W.
i need a parts list so i could repair the pumpβ‘οΈ Reply K.E.W.
the fuel will not pump, I dont have the voltage coming out of the oil area of the board to open the solenoid on the fuel pump. I need a schematic to trace the problem, is there one available ?β‘οΈ Reply K.E.W.
my steam cleaner is flashing F1 light, does anyone know what this fault is and does anyone have a manuel for this model?many thanksβ‘οΈ Reply K.E.W.
my steam cleaner 1640h is showing alarm F1 could anybody help me to find out the reason or send me manual of this machine thanksreygan bernardβ‘οΈ Reply K.E.W.
I need an instruction manual for a KEW 1640H When i put power to it, it just shuts off after two seconds, and i have to reset it. A sign in the small screen says, P1 and F1 i dont know what they mean.β‘οΈ Reply K.E.W.
i cant get pressure on my kew 1640H. But i have seen that there are watercristals in the pressuremeter. Does someone know what the problem is?Thanksβ‘οΈ Reply K.E.W.
we have a KEW steam cleaner,not sure of age,trolley mounted, recent purchase, but not working.is there anybody out there who can help us, with regards to diagrams, or any possible imformation, perhaps we can then decide on further age, model etc , your help would be greatly appreciated.Yours sincerelyβ‘οΈ Reply K.E.W.
need to find out how to change the unit from 110 volts to 220 volts. thanksβ‘οΈ Reply K.E.W.
HI,I HAVE JUST PURCHASED A KEW 38A2VA POWER WASHER. IS IT POSSIBLE TO GET A MANUAL FOR THIS MACHINE? ALSO WHAT GOES IN THE TANK MARKED WITH A SNOWFLAKE?THANKS PAUL.β‘οΈ Reply K.E.W.
No commentsβ‘οΈ Reply K.E.W.
We have recently purchased an second hand KEW high pressure cleaner but it does not get the full cleaning pressure. Can I recieve an owners manual by email to see what parts may be broekn in order to fix the machine?Thank you in advance.best regards,Thijs.β‘οΈ Reply K.E.W.
HelloBought a secand hand KEW38A2VA and overhauld and cleanend the machine. The boiler doesnt start however. Can I get a manual for the machine ?? Thanks in advance. Bodengien.β‘οΈ Reply K.E.W.
The burner wont turn off can anyone helpβ‘οΈ Reply K.E.W.
My Kew is not building up pressure can you tell me why pleaseβ‘οΈ Reply K.E.W.
I have a kew alto 2340ha Everything was working and the usint up and quit It showed a 0 flashing and I unplougged it and put it back it reset to solid 0 but when you push the power on it does nothing. I let sit unplugged but nothing works now. Is there anyone who works on these anymore I am in Wisconsin and I realize it is outdated but I spent thousands of dollars on this unit. Now im stuck Any suggestions ?β‘οΈ Reply K.E.W.
Need transformer for above unit part number #3819901 can you help me..β‘οΈ Reply K.E.W.
Good dayI am trying to find a manual to assist me with the heating system of a K.E.W. 38A2VA.Many thanksβ‘οΈ Reply K.E.W.
hi:i am desperately in need of instruction manual for Kalish automatic label counter.i will really appreciate your help in this regard. thanksβ‘οΈ Reply Kalish
Hi ,I have a swiftpack/kalish .electronic counter and for any reason somebody have chance the language but I can not change it back to English .I do not have the manual for this machine to fine out the right password.MODEL--B12P3ANCSERIAL--M2387THNKS A LOT FOR YOUR HELP.JoseG.β‘οΈ Reply Kalish
Do you have available a Kalish SPC12P Manual?β‘οΈ Reply Kalish
please I need urgent quotation: 1. means compression 3/4D X 1L 902082 QTY: 202. means compression 3/4D X 2L 902126-0 QTY: 8 3. means compression 3/4D X 4L QTY: 5for packing machin Klockner Bartelt.β‘οΈ Reply Klockner-Bartelt
Dear Sir,Could you, please, to help to find manuals for old Klokner Ferromatik Desma machines of 160 / 320 series? How it is possible to get any kind oftechnical manuals of Klokner Ferromatik control units?Thank you Regadsβ‘οΈ Reply Klockner-Ferromatik
re Klockner ferromatic F60, model 1980 , made in germany serial no. 117217 volume 8.6 cm3, 1740 bar---i have a klockner machine with subject particulars, for which i am missing the electric cercuit map and the instruction manual. Pls urge advise if the cercuit map and the manual are available at yours, and if same can be mailed. affirmatively, pls advise cost of same, and proivde your full style and address together with your bankers details, enabling me transfer accordingly.waiting to receive your reply with the maximum interest.best regardselie ordakjiβ‘οΈ Reply Klockner-Ferromatik
re Klockner ferromatic F60, model 1980 , made in germany serial no. 117217 volume 8.6 cm3, 1740 bar --- i have a klockner machine with subject particulars, for which i am missing the electric cercuit map and the instruction manual. Pls urge advise if the cercuit map and the manual are available at yours, and if same can be mailed. affirmatively, pls advise cost of same, and proivde your full style and address together with your bankers details, enabling me transfer accordingly. waiting to receive your reply with the maximum interest. best regardsamosβ‘οΈ Reply Klockner-Ferromatik
re Klockner ferromatic F60, model 1980 , made in germany serial no. 117217 volume 8.6 cm3, 1740 bar---i have a klockner machine with subject particulars, for which i am missing the electric cercuit map and the instruction manual. Pls urge advise if the cercuit map and the manual are available at yours, and if same can be mailed. affirmatively, pls advise cost of same, and proivde your full style and address together with your bankers details, enabling me transfer accordingly.waiting to receive your reply with the maximum interest.best regardselie ordakjiβ‘οΈ Reply Klockner-Ferromatik
Dear sir,We are having Klockner Ferromatik Desma with high speed Injection Moulding machines Of FM series range 140 and 60T. for that we need service and i.e spares for moniter LOT, Pressure transducers, and scale displacement trannsducer.Can u help in this regards?With regards,K. Pavan kumarFor SYMBIOPLAST (INDIA) PVT. LTD.β‘οΈ Reply Klockner-Ferromatik
i get set 12 which says locking pressure build up , pressure switche 27 must switch..i cant seem to resolve this problem, if there is anyway someone could help i would relived to sort this out.many thankspaul andersonβ‘οΈ Reply Klockner-Ferromatik
I have a KEBA KeTop touch screen unit with a damaged touch screen, also will no longer power up. I would like a quote for repair of this unit if it is possible to repair it at all.Thank You,John ChiarenzaAutomation EngineerUniversal Plastic Mold13245 Los Angeles StreetBaldwin Park, California 91706β‘οΈ Reply Keba
I have a (KEBA E-CPU-186) board in need of repair. We have replaced all of the eproms and still have problems with the board itself. Can you repair this board?β‘οΈ Reply Keba
Please quote me:1 KEba card CPU model 186B/D1633CRegardsEng, Hernandezβ‘οΈ Reply Keba
What would it take to repair the above card? and how long?Thanks,Shiva502-553-1770β‘οΈ Reply Keba
Hi could you said me if possible to repair one CPU 211 KEBA, I need to knw the price for fix it, and where are send you the cpu..kind regards.davidβ‘οΈ Reply Keba
New tech support rep for Alcoa pharma group, lookinf for info on your equipment blister and pouch equipment. Would also like operating principles common adjustment as it relates to registration and print.Thank youEdwin Connorβ‘οΈ Reply Klockner-Bartelt
We have purcgased a old one, which is giving trouble while operating. Moniter and programmes works, but we getting some Alarm massages like Filter dirty, Safety gate open,Heating is under narrow zone or outside wide. This all leads to after starting the motor pump shows pressure of about 170 kgs, but we could not start injection cycle nor mold openning closing.Pl. either guide me what are the remedies ?Or if you have any service engg. in India give us their contact nos, and Address.Thanks.Jatin Shah.β‘οΈ Reply Klockner-Ferromatik
Kubota 1J508-59051 controller not responding to inputs. Need immediate repair assistance.β‘οΈ Reply Kubota
the LCD will be working fine one minute then the next there would be just a blank white screen. it would cylcle on & off. the problem is more persistent now. sometimes the screen is completelt black instead of white. please advise on what is wrong with it and options i have in terms of gettinh it repaired. tyβ‘οΈ Reply Kds Systems
I want to know about the adaptador of energy for my KDS Rad 5q i dont have a adaptador because is difficult to find a same. I want to Know if the ampere is important for your workingβ‘οΈ Reply Kds Systems
Hello,Im having some noises with a KTK field controller unit, that has the following numbers write on :6P4Q15A25865/15 08/86.Id like to know if you can give me data sheets or diagrams of the above written KTK unit, or if you repair it, or can you sell me a new controller?Waiting for your answer as soon is possible.Best regards.Giuseppe Bozzarelloβ‘οΈ Reply Ktk Ltd.
I would like to get an estimate on fine tuning and calibrating our Komax 33.β‘οΈ Reply Komax
Hi I have a 3 electronic board model IP1000 for Komax equipment can you help me to repair these electronic board the problem that this have are that the Crimpper dont work dont send the voltaje at the motor.Thanks for yopur help a have a nice day.β‘οΈ Reply Komax
we have a komax 33 that is not working properly. can you tell me how long will take you to do an evaulation?or how long am I looking to be with out the machine?Please let me knowJuanβ‘οΈ Reply Komax
looking for operation manual for a Komax 33.β‘οΈ Reply Komax
Dear Sirs,Id need a service manual for our machine KOMAX33 (S/N K0 4657) due to a strange error message about knife that we are not able to identify.Many thnaks in advance,Massimiliano BrocchiPlant mgr of ICAR SPAVia Nosea, 124030 Villa dAdda (BG)ITALYMob. +39 3290571734β‘οΈ Reply Komax
We have recently purchased a Komax 33. Upon power up the display comes on and we are able to change the length, size and number of pieces....etc., though the Start button LED does not come on. The emergency switch and button works. I noticed in the back a number of ports/connectors. Does this need an external source in order to run this machine?Thanks, Tom StudeCDN SystemsLeander, TX78641β‘οΈ Reply Komax
I need a copy of the komax 33 manual.β‘οΈ Reply Komax
I bought the Komax 33 i can turn it on but i dont understand how it works, i want to get the manual so i can use it.β‘οΈ Reply Komax
Need a repair on an old Komax machine.β‘οΈ Reply Komax
I HAVE KENSOL MODEL - K27 D AND I WAS HOPING YOU HAVE SOMEONE LOCAL IN BUFFALO,NY TO DO REPAIRS AND IF YOU KNOW WHERE I CAN FIND A MANUAL TOO THANK YOU FOR YOUR HELPβ‘οΈ Reply Kensol
I purchased a K.E.W. 1500 unit on a sale and would like to get an owners manual/service manual for it. Its an electric unit. Thank you, Gerry Mansfieldβ‘οΈ Reply K.E.W.
i need new hoseβ‘οΈ Reply K.E.W.
Hi, Help please, im in need of a new lance for my older Kew Hobby 2600, would you have this item in stock ?β‘οΈ Reply K.E.W.
I have recently acquired a K.E.W. Pressure washer and am trying to find information about it. It appears to be from Denmark and in the Model box it just says Hobby. Another box on the ID plate says 62 bar. The gauge on the machine reads 0 to 150 and on the face of the dial it says X 1000. THAT WOULD BE A LOT OF PRESSURE! Let me know if you can help.β‘οΈ Reply K.E.W.
I may have the same pressure washer you have. My pressure gauge shows two circular pressure scales. The outer scale is from 0 to 150 with a heavy mark at the 50 digit and 100 digit. At the bottom it says BAR. If your information plate says 62 BAR as mine does then acceptable pressure is between 50 and 100 BAR. The inner scale is in PSI is shows a heavy mark at 1 and another at 2 which I take to be the normal range as well. It also says x 1000 psi. So, in my case the inner scale is in PSI. When my pressure washer is running (Im going from memory here) it seems to put out around 1000 PSI. Also, my KEW Hobby has a way to check the oil in the compressor at the top near the gauge. I have to pry the dipstick out with my finger nail, but thats OK by me. It thankfully says Full. On the ID plate Ive got a build date of 1986/33 which I take to be the 33 week of 1986. The ID plate also says 100 BAR (which may be the maximum pressure) and a flow rate of 8.6 l/min. This was my Dads pressure washer which I got from him. It still works after all these years although the rubber covering is peeling off the pressure hose exposing the white layer underneath. Good luck with yours.β‘οΈ Reply K.E.W.
Geachte meneer/mevrouw,Ik heb heb kew 1500 hogedruk spuitpart nr. 6137219 Serial nr. 6998760.Kunt u mij vertellen of ik een terrascleaner kan krijgen voor deze hogedruk spuit en als dat mogelijk is kunt u mij vertellen waar en wat hij kost.vr.gr.J.den Dekkerβ‘οΈ Reply K.E.W.
The black hose pipe connected to this pressure washer has a whole in it. Can it be repaired and if so how please. If not how much will it cost to desptach a replacement to me or where can I purchase this hose pipe? Is it something I can obtain from a builders merchants and if so what size please?I look forward to hearing from you as soon as possible please so that I can complete cleaning my patio.Thank youβ‘οΈ Reply K.E.W.
CAN I BUY A SPARE PART FOR THE ABOVE, IE, THE PRESSURE WASHER AT THE END OF THE LANCE.?WITH THANKS AUSTIN GIBBONSβ‘οΈ Reply K.E.W.
I have a KEW pressure washer, model 0840HA. I am receiving intermittant F2 error codes and C4 error codes. I have taken it into my dealer for repair however the problem continues. Any ideas?β‘οΈ Reply K.E.W.
I am looking a the circuit board for my 0840HA hot water pressure washer. Mine burned out, the rest of the machine is nearly new. It would be a shame to trash it. KEW no longer makes this board.β‘οΈ Reply K.E.W.
For any KEW products call Chris Gerber in S.C. (877)322-2586. Very knowledgable and helpfull. He is the US service rep.β‘οΈ Reply K.E.W.
i have a kew 1640ha which i am having a bit trouble with reacently when whent to use it it cum up with the fault L1 and now the machine will not start,i was wundering if you could give me a bit help THANKSβ‘οΈ Reply K.E.W.
HelloPlease can you inform me where i can repair my washing machinemodel (5203k) in united arab emitares.Thanks @ Best Regardsβ‘οΈ Reply K.E.W.
hi i brought this k.e.w h1500 steam cleaner some year ago,i put it away after it was working ok over 12month ago.i lent it to my brother and it will not pressure up.....his any one out there i can ring to get parts so i can fix it thx 07779666678β‘οΈ Reply K.E.W.
Dear Sir,We need our 3 Keyence PCBs repair. The following information is the P/N of each piece,(1) 736-A-C06(2) 667-A-E02(3) 736-A-C02Please advise me if you can offer the kind of service ASAP.If you need the pics, I will send you e-mail with the pics attached.Thanks for your replying.β‘οΈ Reply Keyence
Could you please send me a schematic for the wire harness plug for the KDC-X896? I purchased the stereo at a garage sale minus the plug. I dont have any way of purchasing a plug. I tried using my plug from a KDC-319, but didnt have any luck. Thank You.β‘οΈ Reply Kenwood
Try Pro Instruments @ www.proinstruments.com - phone and email info are on their website. They are US support for Kenwood Texio products. They might be able to help.β‘οΈ Reply Kenwood
Kindly inform us the PARAMETER DETAILS & ERROR CODE of this unit (KEB ANTRIESBSTECHNIK).β‘οΈ Reply KEB Antriebstechnik GmbH
we want to repair a keb turbine drive for laser cutting machineβ‘οΈ Reply KEB Antriebstechnik GmbH
we are trying to find where we can purchase ANTRIESBSTECHNIKgeared motor the number have are AF 90L/41-11 .8kw 3773 944Any help you can give will be most welcomeThank youKenneth Savageβ‘οΈ Reply KEB Antriebstechnik GmbH
HELLOSOMEBODY CLEAN UP THE F4 INVERTER FOR A LEYBOLD TURBINE,BYSTRONIC BTL2800 LASER WITH CARBONIC ICE....AND ALL PARAMETERS ARE LOST. IS POSSIBLE TO FIND SOMEWHERE? FROM BYSTRONIC IS POSSIBLE TO BUY A NEW ONE AND IS VERY EXPENSIVE.BEST REGARDS PAULβ‘οΈ Reply KEB Antriebstechnik GmbH
Hello, I need repair service for some differents electronic equippment, example, MCI 711 press board, DAC-100 Servo control, BIO KARD, SOCCAPEL, POWER SUPPLY. Do you have some prices for the repair of this items? Thanks you/β‘οΈ Reply Komax
Hello, I need repair service o sell for some differents electronic equippment, example, MCI 711 press board, DAC-100 Servo control, BIO KARD, SOCCAPEL, POWER SUPPLY. Do you have some prices for the repair of this items? Thanks you/β‘οΈ Reply Komax
Hello, I need repair service o sell for some differents electronic equippment, example, MCI 711 press board, DAC-100 Servo control, BIO KARD, SOCCAPEL, POWER SUPPLY. Do you have some prices for the repair of this items? Thanks you/β‘οΈ Reply Komax
HI. GOOD DAY I NEED REPAIR ONE E -CAD FROM MCI 761 I LIKE TO KNOW WHERE FOUND PIECES END IF YOU HAVE THE ELECTRONIC DIAGRAM OF THE CONTROL ..THANKSβ‘οΈ Reply Komax
Hello, I have a BT711 crimp module, the ip1000 board have a system failure 4, do you know which component is damage? thanksβ‘οΈ Reply Komax
Hello Mr.I have a problem with the Komax IP 1000.The error message is : communication default.Can you tel me which componet is damage?Thanks.β‘οΈ Reply Komax
I have problem with software for this machine,the machine need load some program to runing,but the software I didn have.Date machine: Machine type: 966.110Z0Year: 1989.Eca: # 411113.Date monitor: Name: culter hammer.mod: D73wtsp2643dw95s/n: 30071-001.Plc: texas instruments.I waiting your answerβ‘οΈ Reply Klocker
I need a service manual for a KEW 1502-66 with exploded views, parts lists with prices... thank you for your time and help with this problem..β‘οΈ Reply K.E.W.
guten abent icsh bin ljimani cshaban aus macedonia tetovo icsh brauche eine pumpe for choch druck for kew 1502und kene cshiken in macedonia und kenen preis ceigen bite und in duetsh ich veis bite und in meine email cshriben bite filen dank fur dasβ‘οΈ Reply K.E.W.
guten abent icsh bin limani cshaban aus macedonia icsh brauche eine tail for meine macshine das chaist pumpe for k.e.w.1502 iat mit drei klipen un federen und kenzi zaigen prais biteβ‘οΈ Reply K.E.W.
I need a instruction manual for a KEW 1502-66 thank youβ‘οΈ Reply K.E.W.
JA ICSH BIN LIMANI CSHABAN ICSH BRAUCHE EINE PUMP MACSHINE FOR AUTO VACSH MACSHINE IST FOR MARKE K.E.W 1502V ICSH CHAP MACSHINE ABER PUMP IST KAPUT BITEIN MAINE EMAIL CSHIKENSI DI VORT FOR MAINE RESPEKTβ‘οΈ Reply K.E.W.
Front seal on pump leaking, looking for parts to repair and repair manual. Please give me a call or email. Thanks Arvidβ‘οΈ Reply K.E.W.
quote for mailing me a replacement cable. it has a flaw in the vga+ power cable. now while i would have no problem splicing the cable my wife requests that i purchase the cable call or email me please.β‘οΈ Reply Kds Systems
I would also like to know if you repair Krausss Hyd. valves??β‘οΈ Reply Krauss-Maffei
I have a faulty encoder input module. Sach-nr 5298024Can you repair same.Please reply if you require any further information.Thanksβ‘οΈ Reply Krauss-Maffei
I am looking for schematics and manual for this machine. Please let me know if you would have this information.Thank you.Trent Tuckerβ‘οΈ Reply Kalish
HI I check all and no start and I am a Electricianβ‘οΈ Reply K.E.W.
I have a KEW 1502V β Hot & Cold Pressure Washer. I will be running this of a Generator at the same time as a water pump which has a rating of 700w.1. Can you what is the start up current of the Pressure Washer.2. What size Generator should I be looking for to run the Pressure Water and the Water Pump (700w) at the same time.2. Can you provide a manual for the Pressure Washer, if so how much?GSJβ‘οΈ Reply K.E.W.
I have a copy of the users instruction book for this machine if you are still in need.β‘οΈ Reply K.E.W.
I still do not have all the details of what this machine is, but it appears to be a hot water pressure washer.. Would be interested in the instructions manual to see if I can get it going. Do not have all of the ID place numbers copied down yet though. The copper windings for the boiler look good from what I can see through the top openings. Do not know what I need yet to get this thing working, the plug has been taken off of it for some reason. Only date tagging is a sticker that says 75th Anniversary on it and a year. That would make it about 15 years ago if I look again at it to verify the date. Would appreciate any and all feed back you can give me and how much you want for the manual or a copy of it. Cliffβ‘οΈ Reply K.E.W.
Price for repair of a KLC-15D300 power supply.β‘οΈ Reply Klaasing Electronics
We have a vb-4 vertical mill with kt-gemmini controls and the hard drive has broken. We have anew drive but do not have the main program disks to re load it. Do you have the software available.β‘οΈ Reply Kearney & Trecker
have a problem with tv dvd dsp receiver hideaway unit the unid burn not work please tell me who much for repair tks so muchβ‘οΈ Reply Kenwood
Have a Kew 3803V pressure washer, need to know where I can get itrepaired nearby.thank youβ‘οΈ Reply K.E.W.
Im needing Spindle Drives Electricam Diagrams Spindle Drive TPA/ 1 15885-603-5306B2Serian Number 2J-415C 78973-2 Rev-1Inland Drive DivisionKollmorgen CorporationIm really apprecite so much for Your helpβ‘οΈ Reply Kollmorgen
I have a Clark EC50 FL andand looking for a battery pack36 v20d x 32 7/8 w x 25 Lβ‘οΈ Reply Kw Battery Company
have a dead batteryID E583 w/covertype 6 75f 236 hours cap. 825 A Hfinish rate 41what dose a new one cost?β‘οΈ Reply Kw Battery Company
Looking for wall brackets ti hang a Lifeguard Freeoresonant Battery Charger on. Can you tell me where i can buy one.Thanks EDβ‘οΈ Reply Kw Battery Company
Is 48 volt forklift battery available for Drexell forklift?β‘οΈ Reply Kw Battery Company
I have a Kouwa hydraulic chiller ( model KMV-150-M16-B )attached to a Mazak FH6800 and the compressor burned up in it. I am looking for a replacement. Do you have one or know where I might find one. I need it ASAP.Thank you for your time,Jesseβ‘οΈ Reply Kouwa
Hello, I am with a HVAC/R company in Southeastern Michigan and have a customer with a Kouwa chiller that needs a new compressor, I would like to help them out, can anyone point in the right direction? i called the number above but only got voicemail. It is considered an urgent situation and i would like to get an answer to my customer as soon as possible. Thank you!!!!!β‘οΈ Reply Kouwa
Need condenser fan motor for an oil cooler model - KCT7-A52NPV.3 phase 200 volt 50/60 cycle.Serial number 0503-G8607Motor Model - VAS355BS-42 .2KW output.β‘οΈ Reply Kouwa
Check to see if you have a Sanyo, model number C-2RN153H3A-tse or possibly a Toshiba TH207JA / TG240X2-FLwww.smallchiller.comβ‘οΈ Reply Kouwa
Need to know were we can get a compressor for a model KMV-150-M15-A please respond soone, Thanksβ‘οΈ Reply Kouwa
Looking for a facility to repair our Kouwa hydraulic chillers ( model KMV-150-M16-B ). Are you interested?β‘οΈ Reply Kouwa
Kouwa KMV-150-M16-A throws an E8 code. Ambient pressure is around 140psi at 75 degrees. Unit will run for about 3 -5 minutes and throw the code. Current to the compressor is about 3.6 amps. Is this a good value? On page 8 of the check out procedure the term thermal setting value for current is listed in the E8 alarm procedure. What is the normal thermal setting value for current draw?What are the normal operating pressures and current load for this unit when running properly? Any ideas on what needs to be replaced?β‘οΈ Reply Kouwa
I am looking for a seal kit for the pump on this unit if you can get one please email me back.β‘οΈ Reply K.E.W.
where might I download a user manual for parts and maintenance of my 1640h Thanks Brianβ‘οΈ Reply K.E.W.
Keys Health 08-0050 Treadmill Controller needs repair. Unit powers on but displays error code E02 and does not respond to speed adjustments. Looking for a technician to troubleshoot and fixβ‘οΈ Reply Keys Health
HelloI have just purchased a KEW 38A2VA power washer with a faulty heater. Is it possible to get a manual and an exploded view drawing over this machine?Thanks! Olaβ‘οΈ Reply K.E.W.
HelloI have just purchased a KEW 38A2VA power washer with a faulty heater. Is it possible to get a manual and an exploded view drawing over this machine?Thanks!β‘οΈ Reply K.E.W.
HelloI have just purchased a KEW 38A2VA power washer with a faulty heater. Is it possible to get a manual and an exploded view drawing over this machine?Thanks!Uffeβ‘οΈ Reply K.E.W.
Good morning I deal with Komatsu Parts and my question is does Industrial Electronic repair Electronic Controllers for the Komatsu Brand machines and also Detroit Diesel.β‘οΈ Reply Komatsu-Dresser
Hi there,Do you happen to have a controller for a komastu pc 150. The serial number is pc150-K30272 or the serial number of the controller is 21230 or part 7834-24-2001?Look forward to your reply.ThanksTimβ‘οΈ Reply Komatsu-Dresser
HAVE A PC200LC-6L W/#7834-72-4002 MONITOR PANEL.WOULD LIKE TO HAVE CHECKED OUT & REPAIRED.THANKS,KEITH GANSNERβ‘οΈ Reply Komatsu-Dresser
We have recently purchase a Kensol K-65H. The unit came with no schematics, or user manual. We currently have an issue with the head coming down and staying in the down position until it decides to return to the home position. We believe that we are missing some parts for the roll leaf operation. Would your facility be equipped to handle this evaluation and repair?β‘οΈ Reply Kensol
Hello, I understand you are inquiring about repair services for your Kaiser Electronics 4001-01-0076/78006 HVPS unit. Could you please provide more information about the specific issue you are encountering with the unit? For example, does the unit fail to power on, or are you experiencing fluctuations in voltage output? Providing detailed information will help us determine the root cause of the problem and provide an accurate repair estimate.Based on initial assessment, depending on the complexity of the repair needed for your Kaiser Electronics HVPS unit, the estimated replacement cost could range from $200 to $500. However, a thorough diagnostic evaluation is necessary to pinpoint the exact issue and provide a precise cost for the repair service. Once we receive more details from you regarding the problem, we can schedule a technician to inspect the unit and provide further assistance. Thank you for reaching out to us regarding your Kaiser Electronics HVPS repair needs.β‘οΈ Reply Kaiser Electronics
My coil froze last winer when heater broke in shop over weekend , do you have any coilsβ‘οΈ Reply K.E.W.
Hello,I have some problems with a KOUWA type KMV-150-M14-CCould you send me electrical sheet please ?thank you in advanceBest regardsXavier ROLLANDMaintenance ManagerFAMER INDUSTRIEβ‘οΈ Reply Kouwa
Hello,Does anyone have a list of fault codes? Or the Troubleshooting Guide?Thank you.β‘οΈ Reply Kouwa
HiI need a replacement compressor motor for the above unit.Can they be sourced in Europe or do I need to import? either way I need cost and delivery time urgently.Steveβ‘οΈ Reply Kouwa
just want to know how old this machine is and if it can still be repaired,i have no knowledge of what year it was made and know of no place to get it repairedβ‘οΈ Reply K.E.W.
I have a KEW 23A2V pressure washer that the boiler Coil is completely shot now. I have welded some hole back together, but now it is beyond repair. Does anyone know where I can get a replacement coil?β‘οΈ Reply K.E.W.
I have a model kmv-110-m10-a, and it is used as a spindle coolant chiller and pump for a Masak 510 mill. The problem is that I am getting three alarms. The chiller unit in giving an E-9 alarm ( Oil pressure (flow) is lowered.) Consequently, that is generating two alarms on the masak machine side. 206 Spindle Lube chiller malfunction. And also, 392 Thermal Displacement offset Error. Im sure both of the masak alarms are related to the chiller alarm. My Question is, what would cause the chiller unit to generate the E9 alarm? Plugged suction strainer? Pump going bad? Motor? The unit is only about three years old. Any advise would be greatly appreciated. P.S. The problem is intermitant. And can usually be cleared by powering off unit and machine, and powering back on. Thank you, Nathan Olson Northland Machine Inc.Grand Rapids MN218-328-6479β‘οΈ Reply Kouwa
Kindly let us know whether there is any Kouwa chiller service facility in India.β‘οΈ Reply Kouwa
I have a manuel for the Kouwa model: KMV-150-M16-B-002 but not a parts list so I can order a cover for the wires above the condenser and a cover for the reset switch. Thats just a start, having the parts list would be very helpful.β‘οΈ Reply Kouwa
The above Model is on a Machine where I continually get an E8 Error for Thermal Relay Overload. The Compressor will run for no more than 1 minute. Amps or Watts run high. Seems like an internal failure on Compressor. Any other thoughts before I replace Compressor? Condenser Coil is clean, great airflow. Nothing noticeable at Liquid Filter screen before Cap Tube.Also on this Unit it says Refrigerant is R407C. Any ideas on how much Refrigerant is in System in pounds?Any Tech info on this unit in regards to the Refrigeration cycle would be great.Thank you,Andrew Maassβ‘οΈ Reply Kouwa
Hi , would you mind to give me a quotation for the chiller unit Model Kouwa Model KMV-150-M15.Thank you in advance.β‘οΈ Reply Kouwa
I have the above mentioned kouwa. we have a code flashing E9. I dont have a repair manual for this machine, and I may need a technician. What can you tell me about this code? please. I work for Collins Aerospaceβ‘οΈ Reply Kitake
We have a new chiller that is missing a ribbon cable connecter.Is this something you could supply for us. Or would you know what we need order.Thanks John Swank (773)501-7281β‘οΈ Reply Kouwa
I am looking for a flow switch. for model #KOEJ112BOV Serial # 1510-R0490-N81. Hope you can helpβ‘οΈ Reply Kouwa
I have a Kouwa chiller Model KMV-150-M15-B I keep getting a EJ alarm which is not in my manual. Any ideas???β‘οΈ Reply Kouwa
The condenser coil on my kmv-150-m34 unit is leaking , which is causing a chiller malfunction alarm. Does anyone know who to contact for a replacement condenser coil ????????β‘οΈ Reply Kouwa
Have an Eu alarm on a brand new Kouwa chiller unit on a Mazak ST550. can not clear. Any suggestions?β‘οΈ Reply Kouwa
CURRENTLY FAILS GPIB COMMUNICATIONSβ‘οΈ Reply Kikusui
I have a 1979 kew power washer and am looking for some pump parts or info on where to get parts it is mostly all in good shape put the pump needs work any info would be greatly apresated thanks ryanβ‘οΈ Reply K.E.W.
Hi I have a Heated Pressure Washer, and Im lookin for a specific part can you tell me if ispossible to found it. Lelow information of the machineMAKER: KEWMODELL: 3803V-103SER:2103205ASSET:43-1-5β‘οΈ Reply K.E.W.
Good dayIm looking for a user manual for the obove mentioned machine if you can pls tell me where to go or how to get oneβ‘οΈ Reply Klockner-Ferromatik
Welcome to the world of adult Dating loveawake.ruβ‘οΈ Reply Klockner-Ferromatik
I have a KOUWA liquid tuner MODEL KMV-150-M14 using R407C refrig. I have installed a new compressor in this unit and need to know the amount of refrigerant to install in the unit. Iwould also like the running pressures thank youβ‘οΈ Reply Kouwa
I have a customer that is using a Kouwa Mod# KMU-150-M-16-B S/N 181776 oil cooler. Can you tell me what pressures to expect and how much 407C is supposed to be in the unit? We just replaced a stuck compressor and my suction pressure is at 0Psi. Performed system flush, installed new strainer and cap tube. Mazak hasnt a clue.ThanksJohn ArrinigtonHolohan Inc.Kankakee,Illinoisβ‘οΈ Reply Kouwa
Please let me know where i can get New or Rebuilt Liquid Tuner # GKN-75-HFVCβ‘οΈ Reply Kouwa
I have a customer that is using a kouwa KMV-110-M10-A oil cooler can you sendt my a parts list.Mandervelt J.M.Gemacool Genk,Belgieβ‘οΈ Reply Kouwa
I have a customer that is using a kouwa KMV-110-M10-A oil cooler can you sendt my a parts list.KMV-110P-M10-C01β‘οΈ Reply Kouwa
Type : KCT 7 -A52n-ASerial : 0807-H0256β‘οΈ Reply Kouwa
Hello, We have a bad compressor SANYO part: C-2RN153H3A code: 80805183 This it installed on KOUWA LIQUID TUNER model: KMV-150-M16-B Mfg. No. 0601-M7189 Could you send us please price and delivery time. We are in Nuevo Leon, Mexico. Please, send the answer as soon as posibble. Thanks.β‘οΈ Reply Kouwa
Looking for pricing for a compressor # C-2NR153H3a (808-051-83) and a fan motor # VAS405BS-42. Both from a Kouwa chiller unit # KMV-150-M14-Aβ‘οΈ Reply Kouwa
spare parts price and delivery time for a compressor for KMV 110 M21-Aβ‘οΈ Reply Kouwa
Do you sell compressor pumps for a KMV-150-M14? If not can you tell me where I can locate one. Thank you, Garyβ‘οΈ Reply Kouwa
We dropped our USN52L from 8 foot height. No obvious damage to the case or screen, but now it will not operate at all.Please advise whether this unit is repairable and/or your opinion of cost effective repair.Thanksβ‘οΈ Reply Krautkramer
Hello, We KEB COMBIVER F4 FREQUENCY CONVERTER, WANT TO REPAIR THE SAME. Which is used in along with Leybold Turbine D2500Please send the reapir cost urgentlyPLEASE DO NEEDFUL.Thanks & regardsβ‘οΈ Reply KEB Antriebstechnik GmbH
To whom it may concern,We have an Ultrasonic Test equipment (Brand name: Krautkramer, Model: USN Model), this equipment was broken, we have to repaired it. The Repairman requested the circuit diagram of USN 50 model ultrasonic test equipment,Could you please send me circuit diagram of USN 50 model ultrasonic test equipment,Please send me an e-mail about this,Best regards,β‘οΈ Reply Krautkramer
I am looking for a replacement timer for a KW battery charger.The model is 18-600F3B-21, serial K8126, spec B8720T F. Do you sell parts for this charger, or do you know where I can purchase parts?β‘οΈ Reply Kw Battery Company
Hi Mr/Mrs,Please advise your availability and price of compressor and main board for below machine type:KOUWA liquid tuner model KCT7-A52NThose parts to be delivered to Jakarta Indonesia.Best Regards,Heruβ‘οΈ Reply Kouwa
Hello,i would like to have price and deliveryconditions for a compressor KOUWA type KMV-150-M14-C-002 on R407 C gas and 3 x 200 V 50/60Hz.Can you inform me as soon as possible please ?I am a refrigeration company in Belgium (www.golling.be)Best Regards,Alain GOLLINGβ‘οΈ Reply Kouwa
Hello,i would like to have price and deliveryconditions for a compressor KOUWA type KMV-150-M14-C-002 on R407 C gas and 3 x 200 V 50/60Hz.Can you inform me as soon as possible please ?I am a refrigeration company in Belgium (www.golling.be)Best Regards,Alain GOLLINGβ‘οΈ Reply Kouwa
bonjour je recherche un compresseur R407C KOUWA LIQUD TUNER KMV-150-M14TARIF + FRAIS DE PORT ET DELAISSALUTAITONSβ‘οΈ Reply Kouwa
HiI need a compressor motor for a KMV-150-M14-C, we require this part urgently so details of agents in the UK or Europe would be helpful.is there a specification available for this compressor so we can source our own unit?β‘οΈ Reply Kouwa
WORKING ON CHILLER UNIT ON A MAZAK AND IT KEEPS SHUTING DOWN WITH AN E6 ERROR CODE . IVE CLEANED THE COIL AIR FILTERS ALL THE Y SUCTION STRAINERS . BUT WHEN I POWER UP MACHINE FAN COMES FOR TWO SECONDS AND QUITS. NEED SOME HELP PLEASEβ‘οΈ Reply Kouwa
Can the temp diff. be set any greater on a KMU-150-M16-B liquid tuner? the system currently has about 1 deg C between on/off cycle. Orignial compressor locked up. Charge was correct. We believe the excessive start/stop of the unit caused lock-upβ‘οΈ Reply Kouwa
repair cost ip1000and i need used qty.3β‘οΈ Reply Komax
hello..i would like some assistance with re-installing this machine..β‘οΈ Reply Klockner-Ferromatik
Hello,I am reaching out on behalf of a client who is experiencing issues with their Komax 33 wire machine. The part number involved is . The client has described a problem with the machine, but I do not have all the details at the moment. Could you please provide me with some guidance on how we can address this issue?Thank you for your assistance.Best regards,β‘οΈ Reply Komax
I have a Showa temperature controller Model#sho-650-104-lfvc-dc in the instruction manual it says to contact you for service.Is ths correct? and if it is do you have parts and tech support. our unit is running but we are going to need filters ect. down the road.thank you for your time,Joe colomboβ‘οΈ Reply Kouwa
1-437-496-21KRT-7-A-005S1K4F1SKKITAMURA KIDENPOWER SUPPLY FROM SONY 400DVD PLAYERβ‘οΈ Reply Kitamura
Hello, the KEYENCE CA-DC30E TERMINAL is not functioning properly. Further details are currently unknown. Please investigate and report back with more information. Thank you.β‘οΈ Reply Keyence
I need a troubleshooting manual for KOUWA LIQUID TUNER model: KCT7-A52N (english langauge). Now machine alarm code show E2. Thank you Peerasijβ‘οΈ Reply Kouwa
Pls technical supportβ‘οΈ Reply Kouwa
I need a troubleshooting manual for KOUWA LIQUID TUNER model :GK-150T-FZC-BE (english langauge).Now machine alarm code show E6 .Thank youβ‘οΈ Reply Kouwa
Dear all :We are looking control Board, P/N : NAYUTA NB-584 01855B = 1 unit. Pls advice your price + freight cost + lead time to us.Best regards,Ms. Yingβ‘οΈ Reply Kouwa
I need an English manual for model KMV-150-M15-H serial 1906- M2328. I also need some sort of guidance with dip switch settings on the board.β‘οΈ Reply Kouwa
trying to convert a 208volt to 480kw 12 m725f3b bb718afk1105thanks james have no drawingβ‘οΈ Reply Kw Battery Company
Seeking repair for a Korteck KT-LS15XH LCD Monitor displaying a flickering screen with distorted colors. Need assistance urgently. Thank you.β‘οΈ Reply Korteck
I am getting an EA fault code on tuner display as soon as the unit is powered up. The EDM that it is attached to comes up with a false U794 high fluid temp alarm. I have checked all the wiring and fuses as well as the phasing of the motors.β‘οΈ Reply Kouwa
The Kniel FDC 5.12/24/PFS controller is not powering on when connected. Urgently looking for repair service to resolve the issue.β‘οΈ Reply Kniel
we have a Mazak VCN 510 C serial 162546 march 2003 with a schiller KMV-75-M02 the board NAYUTA NB-584 is out of orderWe do not know if the display is ok or notpls your comments asap we are in a hurry with that machine cordiallyβ‘οΈ Reply Kouwa
Hello there,We have Mazak 410 VMC with Serial no. 175268. There is Kouwa Liquid Tuner installed in it for spindle lubrication with Model no. KMV-75-M02-B with Mfg. No. 0607-M9038. It shows EE alarm on display and we are not capable to remove it. Kindly provide a suitable person or mail-id or if you can provide support through mail-id. Our machine is idle from last 20 days. Thanks & RegardsRashpal SinghIn-charge CNC SectionFor Ambika Overseas,Model House Road, Basti Shiekh,Jalandhar - Punjab (INDIA)β‘οΈ Reply Kouwa
Our tuner got a E9 error and then the controller went out. Pulled the controller cover and found NB0793 is smoked. We are trying to locate another circuit board to replace it with or maybe even have this one repaired; whatever is the quickest. Thanks, Chris Haiglerβ‘οΈ Reply Kouwa
Good morning our unit a KMV-150-M16-C. tHREW AN E8 fault. Per Mazak tech he said it was a bad compressor. We are trying to locate a compressor for this unit. We have a very hot job to run on this machine and need it repaired asap. Any help would be greatly appreciated. If you need additional info call Alan E. Trimue at 989-274-5675. Thank you.β‘οΈ Reply Kouwa
Kouwa Liquid tuner Fan motor D-PT-Z 222-S required & send details in India sale& service contact no , Email address, This liquid tuner using for Mazak m/c ,β‘οΈ Reply Kouwa
Getting an E7 alarm on the unit. What is the normal cause of this?β‘οΈ Reply Kouwa
I need a compressor for a kouwa kmv-150-m15-b but the BTU of the unit is not listed in the maunual. Its a 220v 3ph system.Do you sell the compressors? If so how much are they and what is the BTU rating?Thanks!!β‘οΈ Reply Kouwa
Hey team, the KUKA ECMBP1D3404BE531 unit went down mid-shift. Need someone to check it out ASAP in the morning. Thanks!β‘οΈ Reply Kuka
: Our industrial unit, which processes briefly describe the product or service, has experienced a malfunction in the control system. The unit is currently unable to produce output at its usual capacity and requires immediate attention. The estimated cost of repairing the existing control system is estimated repair cost, but if that fails to remedy the problem entirely, replacing it with a comparable model would likely cost between estimated replacement cost range. We require a swift assessment of the units damage and a proposed course of action for repairs or replacement within the next 24 hours.:β‘οΈ Reply Kikusui
hello i have a kouwa chiller on my mazak its flashing EJ on unit wanted to see what this meant thanksβ‘οΈ Reply Kouwa
I am looking for a company that can repair or replace the keypad membrane on my IBT-Basic operator panels.β‘οΈ Reply Kannegiesser
Subject Urgent Repair Needed for Korteck KT-LS15XH LCD MonitorGreetings,Our Korteck KT-LS15XH LCD monitor is displaying a blank screen with no power indication. No error codes or alarms are shown. We urgently require your expertise to diagnose and resolve this issue.Looking forward to yourβ‘οΈ Reply Korteck
Mazak 6800 HMC uses Model KMV-150-M14-C. Had a 30 amp trip shut down machine. Traced to low oil in the in the Hysol (Left side oil fill port). Still tripped. The CM motor starter 4th from left was dirty with carbon. We changed it out. Still trips. We ohmed out the motor. Seemed good. Thinking what the motor is spinning had frozen up but the e stop wont go away and the chiller never starts. I get the 4 dashes at boot up and I can push the parameter button to see A200. Nothing else shows on the display, no alarms.β‘οΈ Reply Kouwa
Subject Urgent Request for Repair Info on KEB 09.F5.B1B-R001 F5 COMBIVERT DRIVEHi ,Our KEB 09.F5.B1B-R001 F5 COMBIVERT DRIVE has stopped working, and we are in urgent need of a replacement. Unfortunately, we couldnt find a suitable replacement. Could you please provide us with repair information as soon as possible?Thank you for yourβ‘οΈ Reply KEB
I Have Model # KMV-75-M02-A W/ No Manual Alarm E1 on Unit.β‘οΈ Reply Kouwa
Helo, my name is Fabio.I working into graphics industries and need informations and eletric diagram for a LED DISPLAY.In Eleltronics Boards have word KLAUS ROTHENBURG GmBH.You could help me?Thanks for attentionsβ‘οΈ Reply Klaus Rothenburg
Hello, I understand you are experiencing issues with your KA Schmersal 2448 board. If you could provide more information on the specific problem you are facing, that would help in diagnosing the issue accurately. From your description, it is unclear what the unit is or isnt doing. As for potential costs, replacement parts for the KA Schmersal 2448 board could range depending on the extent of the repair needed. A ballpark estimate for a full board replacement could be in the range of $200 to $400. However, without a detailed analysis of the problem, its difficult to provide an exact cost. To proceed with repair services, please provide more details on the symptoms or problems you are encountering with the board.β‘οΈ Reply Ka Schmersal
Experiencing issues with the Krone 200809844 Baler Controller its not responding to commands properly. Need a repair technician ASAP.β‘οΈ Reply Krone
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
π Rush repair shipments only β no walk-ins.
Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
π¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.