We repair a wide range of L Equipment.
Ask questions, or call 1-336-969-0110 for faster service.
Use the search bar above to find specific manufacturers.
The L A Starrett 60850 is a precision digital level commonly used in industries such as manufacturing, construction, and engineering for measuring angles and leveling tasks. It features a digital display for accurate angle readings, a durable aluminum construction for rugged use, and a magnetic base for secure mounting on metal surfaces. Common failures in this device may include display malfunctions, inaccurate readings due to sensor issues, and wear and tear on the exterior components. Regular calibration and maintenance are recommended to ensure consistent and precise operation.
The L and H mmii-e0915-115 is a common industrial electronic power supply unit used in various applications. It features a wide input voltage range of 100-240V AC, making it suitable for different power systems. This model is designed to provide a stable output voltage of 24V DC at 3.75A, making it ideal for powering electronic devices in industrial settings. Typical failures of the L and H mmii-e0915-115 include overheating due to excessive load or poor ventilation, capacitor degradation leading to voltage fluctuations, and component failures caused by power surges or electrical shorts. It is important to regularly inspect and maintain this power supply unit to ensure optimal performance and reliability.
The L A Starrett 60849 is a precision electronic level commonly used in industrial applications for measuring and checking the level of surfaces. It features high accuracy, digital display, and a durable construction suitable for rugged environments. Typical failures include display malfunctions, sensor issues, and battery-related problems. Regular calibration and maintenance are recommended to ensure accurate measurements and prolonged equipment lifespan.
The L and J Engineering MCG 2100 model is a versatile motor condition monitoring device used in industrial settings. Its main purpose is to monitor the health of motors by continuously analyzing key performance parameters such as vibration, temperature, and current. Key features of the MCG 2100 include multi-channel inputs for comprehensive monitoring, customizable alarm thresholds for early fault detection, and integrated data logging capabilities for trend analysis. Additionally, it offers remote monitoring and diagnostics through Ethernet connectivity. Typical failures associated with the MCG 2100 include sensor malfunctions leading to inaccurate readings, communication errors causing data loss, and power supply issues affecting overall functionality. Regular maintenance and calibration are recommended to ensure the device operates effectively and contributes to the efficient operation of industrial motors.
The L and J Engineering 820054 e is a motor controller used in industrial applications. This device is designed to regulate the speed and direction of electric motors, providing precise control over various industrial processes. It offers features such as adjustable speed settings, direction control, and overload protection. Common failures in the L and J Engineering 820054 e include power supply issues, component failures due to overheating, and damage to the control circuits. Regular maintenance and inspection can help prevent these failures and ensure the reliable operation of the motor controller.
The L Siete wv-smb-1 is a high-performance industrial Ethernet switch typically used in automation and control systems. It features seven ports, providing reliable connectivity for various devices within a network. Typical failures include port malfunctions, power supply issues, or firmware corruption that may require reprogramming or hardware replacement. Regular maintenance and firmware updates are recommended to ensure optimal performance and longevity of the switch.
The L and H 855553-565 is a precision oscilloscope commonly used in industrial electronics repair. It features high input impedance, a wide frequency range, and accurate signal measurement capabilities. Typical failures in this model include display malfunctions, power supply issues, and input/output connector failures. Proper maintenance and calibration are key to ensuring reliable performance.
The L and H 851040-004 is a power supply module used in industrial electronics. It is designed to provide a stable and reliable power source for various electronic devices. Its features include high efficiency, compact size, and a wide input voltage range. Common failures in the L and H 851040-004 power supply module include component degradation, loose connections, and overheating issues. These failures can lead to voltage fluctuations, power interruptions, and ultimately system malfunctions. Regular maintenance and timely repairs are recommended to ensure the proper functioning of the module.
The L and H 847760-001 is a power supply unit commonly used in industrial electronics. Its primary purpose is to convert electrical power from a source into usable power for various components within electronic devices. This power supply unit features high efficiency and reliability, making it suitable for continuous operation in industrial environments. It typically includes overvoltage protection, short-circuit protection, and thermal protection to ensure the safe and stable operation of connected devices. Common failures in the L and H 847760-001 power supply unit include component degradation, overheating, capacitor failure, and power surges. Regular maintenance and inspection can help prevent these failures and ensure the longevity of the unit.
The L and H tm23-e0789-115 model is a temperature controller used in industrial processes. It features a user-friendly interface for setting and monitoring temperature levels accurately. The typical failures with this device include sensor malfunctions, control relay issues, and power supply failures. Regular maintenance and calibration are essential to ensure proper functioning.
HalloCan you please help me about a manuel for a Argus 3 readerWe use the Argus 3 for codereading.best regardsCCL Labels A/SMichael JensenQa coordinator➡️ Reply Laetus Am Sandberg
We have contacted the company in Germany and requested a manual. Will let you know when we receive any futher information. Thanks ------------------- Laetus am Sandberg Geratebau GmbH Postfach 1262 D-64660 Alsbach-Hahnlein - Germany Tel: +49 A– 6257 A– 50090 Fax: +49 A– 6257 - 5009260 Laetus am Sandberg Geratebau GmbH (a company based in Alsbach, Germany).➡️ Reply Laetus Am Sandberg
Hello...Just a quick question. Do you have a schematic or parts list for the Larko commercial vehicular gate operator Model MKI #41 ??Need to identify the value of what looks like a high voltage capacitor in the motor driver circuit. No values are printed on the part itself. The part is bright red with about one half inch diameter. Seems to form a filter (along with a high current) coil between a 15 amp fuse and the motor itself.If you have either the manufacturers diagrams or the capacitor for this unit would you please contact me as soon as possible?Thank you,M. Bellesfield323-960-4315net_workz@hotmail.com➡️ Reply Larko Electronic
My community has a Larko Commercal Gate for the community. Where do you suggest I get a car remote for it?➡️ Reply Larko Electronic
I need the nylon wheels stops that turn off the opener for a Larko Model MKI-41. Where can I get them?➡️ Reply Larko Electronic
Hello:Could you please share the board to Motor connections diagram for the LARKO MKI-40 gate opener?.Ill appreciate your helpBest regards.➡️ Reply Larko Electronic
My opener has been unused for the last 5 years and now i would like to get operating again. All the parts are there and the logic board has been upgraded. Need to know how to jumper it to so that i can operate it and reset the open and closed stops.Thanks in advance Curtis Belk➡️ Reply Larko Electronic
I have a Larko 80-60E swing gate controller that is no longer working. The Logic board is a 24-02 Rev 15 and the Power board is a 24-04 Rev 3. Do you have replacement boards or schematics / manuals?➡️ Reply Larko Electronic
Looking for the repair manual for the above mentioned gate opener. If you have knowledge as to where one could get a hold of one of these, I would appreciate it.➡️ Reply Larko Electronic
Where can I purchase a repair manual and schematic for a Larko MK I40 gate opener ?➡️ Reply Larko Electronic
Replaced drive motor, but need information on how to retime the opening and closing.➡️ Reply Larko Electronic
I installed a new belt on the larko model I #41 an it will open just fine but will not shut. There is nothing blocking sensor nor there is no sound from motor at all if you can help i wouold suer appriciate it thanks dion➡️ Reply Larko Electronic
I NEED TO AUTOMATE GATE (CLOSE AUTOMATICALLY). I NEED DIP SWITCH CONFIGURATION.PLEASESTEVE➡️ Reply Larko Electronic
Where can I purchase a Larko gate opener?➡️ Reply Larko Electronic
Hi. My driveway slide gate motor belt broke,Larko electronic,Would you please tell me . Where can I get the belt around Los Angles area. Tkank you.➡️ Reply Larko Electronic
Logetronics 326-00-243 not powering on despite multiple attempts. Need urgent assistance.➡️ Reply Logetronics
i am searching for indian counter part of linotype paul of UK please help is you know.rgards➡️ Reply Linotype-Paul
Dear Sirs,We are currently using a Laetus bar-code system (black only) to identify our packaging articles. We would like to buy a bar-code reader (pen-type) which is able to recognize Laetus codes when the final corrected proof has been made. This will enable us to gain time when checking all the dimensions before giving our agreement to the printer to pass for press. Could you kindly let us know if you sell this type of bar-code reader (pen-type) ? If not, could you send us a list of the suppliers in France or abroad who sell them ?Thanking you for your help,Yours faithfully,➡️ Reply Laetus Am Sandberg
We have a brand new (never used) 15 year old vacuum pump with a Leland Faraday motor attached to it. We need to wire it for 208/220 volts but the wiring instructions are missing. The id tag on the motor says it is Type: ASFA BB and Model: LFI 84015C. The wires all have their id tags, we just need to know which to connect together for the 208/220 connection.If you can help us out, please let me know.Thanks.➡️ Reply Leland Faraday
Need a wiring diagram for a compressor.Thank you for your help.➡️ Reply Leland Faraday
I have a 1.5 HP motor, it has 4 wires, one black, one red, and two that appear to be brown? They may of been a different color before? I had to wipe grease off of them just too see the red, and black wires. Other info I have is a Type # R 59, 110/220 volts, No.3639L3580, CV 3071, FR 203/4, 1725RPM, 60 cyl, form BICWJH, plate also says Guelph Ontario.I am looking to know what the other two colors are, and which combination of colored wires too hook it up for 220 volt operation, any and all info would be greatly appreciated. Thank you very much, Julien Lepitre.➡️ Reply Leland Faraday
part# m30502 frame s182t volts 115/230 the wiring diagram is not complete it has two capasatores and 8 wires➡️ Reply Leland Faraday
i have a 1 hp 1 ph leland faraday compressor motor with no wiring diagram. i want to know if i can run it on 110. the number on the side plate is 51 j17 6131 1 m306 81c frame k203. the wires coming out of the motor are red green yellow white blue and black.i need to know how to wire it for the right volts. thany you matt shea➡️ Reply Leland Faraday
wiring diagram for 110 volts➡️ Reply Leland Faraday
I need the wiring diagram for the motor. Its a M306➡️ Reply Leland Faraday
i need a wiring diagram for a wood splitter - leland farady- 3/4 horse motor M271 -from 220 to 110➡️ Reply Leland Faraday
Give me link to SEO software (promotion, advertisement, etc.). Im need it to promote my new e-shop. Thanks.➡️ Reply Leland Faraday
please send diagram➡️ Reply Leland Faraday
Have a MN-M-2052A motor. What color/number wire controls the cintrifical switch➡️ Reply Leland Faraday
Good MorningCan you please forward a wiring diagram for a M-511U 1/3HP 3450 RPMCat# C48H2N109B1➡️ Reply Leland Faraday
Need to know how the wires are hooked up on the pump all of them inside the canopy➡️ Reply Leland Faraday
I am wondering if you have a quote on or would have a picture electrical diagram for a Leland Faraday SCR Variable speed drive Model # MSCR.Please let me know as soon as possible Thanks Nicole➡️ Reply Leland Faraday
I am replacing my current, bad, 4HP, which is a 3 wire (black, white & green) with your 2HP M-2958E, which has 4 wires (red, black, yellow & blue).How can I wire this to my pressure switch which has four attach locations, 2 hot and two for the motor attach and a ground location.Thanks,Doug➡️ Reply Leland Faraday
Dear sir :We have a Leroi Dresser air compressor in our projcet . We want to know the agent for this type of compressors in Saudi Arabia .FarrajSincerely➡️ Reply Leroi Dresser
I need a service station in my general area of Maryland➡️ Reply Leroi Dresser
I have a 1988 LeRoi compressor 185 cfm Perkins diesel that has a C.A.V. primary fuel filter located near the fuel tank. It has the secondary filter monted on the engine. The secondary filter uses a 33166 canister filter. The primary did not have a filter element in it, just a metal cone. Is this filter supposed to have a filter element inside? If so, does anyone have a part # ?➡️ Reply Leroi Dresser
Hi, I have a Dresser 5000 with serial #. 4005X4959. I have been told the parts I need are obsolete but I cant believe know one doesnt have them. Anyway the part # I need is H39-4824 and H34-1261. I believe the whole balancer is GH116-320 or 820, if the whole thing is avaliable that way then I would take it.➡️ Reply Leroi Dresser
Hello Sales. We are a united kingdom based company with affiliates in benin and Nigeria.I will like to order for some of your product to one of my clients in the countries mentioned above.But before I proceed,I would very much appreciate if you could respond to our email as soon as possible.Also let us know if you do accept MASTER/VISA cards as means of payment and if you can ship to the detinations listed above via DHL freight courier service.Besides,let me know if the mode of payment for this transaction is accepted so that i can send my order. I look unto your reply regards,John.➡️ Reply Leroi Dresser
i need flexable member, coupler for this unit➡️ Reply Leroi Dresser
let me know price and delivery time part for compress leroi dreesser model # w5158v2 erie # 5000 two stage 1) 1 kit of gasket2) 1 set of bearing h21-9783) 2 ea cone bearing h187-4174) 2 ea bearing needle bushing h21-9835) 1 a seal oil h125-7496) 2 ea cup bearing h81-4157) 1 pin pston h17-1125b8) 1 pin piston h17-1124-fMETALMACHINING CO. INC.ROAD #2 KM.24.8 ESPINOSADORADO P.R. 00646ATT: GILBERT CRUZPHONE # 787-883-8852FAX # 787-883-8796EMAIL: gcruz@metalmachining.com➡️ Reply Leroi Dresser
GENTLEMENI WILL APPRECIATE IF YOU CAN GIVE ME INFORMATION ABOUT WHERE TO GET PRICES FOR LEROI DRESSER AIR COMPRESSOR PARTS.WE NEED PARTS FOR LEROI DRESSER MODELS: 700, 800 AND 880.THANK YOU FOR YOUR ATTENTION TO THIS REQUEST.FRANCISCO ROCHAF&R INTERNATIONALMEXICO CITYT. 2142-1927e-mail: fr_intl@yahoo.com fr_intl@hotmail.com➡️ Reply Leroi Dresser
I NEED HELP FINDING MANUALS FOR MODEL 130RGITHANKSBOBBY RAYBAXTER HEALTHCARECLEVELAND MS 38732➡️ Reply Leroi Dresser
I was wondering if you could track down an owners manual for a leroi air compressor # 20 sst, pump # a219-79. My boss has one with hardly any hours on it has been setting for a while. If you can help please mail me back. thank you steve➡️ Reply Leroi Dresser
I was looking for a rebuild kit for a Dresser Model 500 Air Compressor. It is from the early 1970s and has 5hp motor w/ 120-150 gallon tank. Please let me know if you can be of any further assistance. Chuck BozasParts SalesThe Craun-Liebing Company➡️ Reply Leroi Dresser
drifter air control valve or substitute part for a leroi/dresser drill Model CDR-12E part number is AM81-247. Controls rotation/feed/drill and blow.➡️ Reply Leroi Dresser
I have been given a Dresser Series 5000, S/N 4005X22583 compressor (less motor and tank). I am building a compressor unit for running a small sandblaster, but I need to know specifications on the unit above and what HP and RPM motor, as well as the size of the motor pulley (double pulley) I need to operate at maximum efficiency. Also, where can I get parts for the unit, as the reeds may need replacing? Thanks➡️ Reply Leroi Dresser
I have a 1992 model A219 178 Leroi aircompressor ,The filter container has been leaking transmission fluid,I would like to know where i could buy a service manual for this machinePlease get back to me have a great dayTom➡️ Reply Leroi Dresser
I AM LOOKING FOR A MANUAL ON A LEROI DRESSER 3054X27 1500 CFM 100 PSI COMPRESSOR THANKS FOR YOUR HELP➡️ Reply Leroi Dresser
looking for a service/operators manual for compsser model 85RGEW➡️ Reply Leroi Dresser
The Air compressor is a Leroi international, IncModel #: WE100SSIIAHS/N: 4227X625PSI: 125➡️ Reply Leroi Dresser
need a shop manual geting oil in air line how to stop it.➡️ Reply Leroi Dresser
need a fiber coupler disk for my 175 SDE compressor with the deutz diesel engine or a book with the part numberThanks➡️ Reply Leroi Dresser
pleasce parts air compressor screw rotary model WE100SSAQH SERIE 4227X554,air filter,oil filter, separator AIR/OIL ,Shaft Oil Seal ok please held➡️ Reply Leroi Dresser
Hello, I am looking for a repair manual for a leroi 185 compressor➡️ Reply Leroi Dresser
I recently purchased a 1978 Ford 7000 equpped with a road striping unit. It has a Leroi Dresser Compressor. It also has a hydraulic system driven by a Perkins diesel engine that drives both the hydraulics and the compressor. It starts up with no problem and will pump air up to 160 lbs, psi and then pops off the pressure relief mounted on the tank. I have no idea what is wrong and who can service this in the upstate Albany, New York area. I would also like to know if there is a manual, parts list. etc that I could obtain. Please call me as soon as possible, it is important that I get this truck up and running as I have work scheduled for this truck. My phone number is 518-857-8200. Thank you, Joe Kelley, Northeastern Striping Services, Inc.➡️ Reply Leroi Dresser
I am looking for the specifications of what appears to be a LeROI Dresser Rotary Screw Pump. The housing has the following stampings:Mfg: A219-84-3Serial No: 4154X110The best information I have been able to find is the original vendor was Gardner Denver but teh actual Rotary Screw Pump OEM is LeRoi DresserThe MFG Number appears to relate to: LeROI Part: D450-490SS➡️ Reply Leroi Dresser
im looking for air compressor 440A.we have this model in our plant aan we need to buy new one.wuold you help please➡️ Reply Leroi Dresser
Im looking for air compressor Dresser 440A.we need to buy new six.wuold you help pleaseBest regardsOrlando Farnetti➡️ Reply Leroi Dresser
Dear Sirs:How may I receive a service manual for a LeRoi Dresser Air Compressor Model # A219-132-4 Serial # 3174x29Thank you,Thomas Dameron➡️ Reply Leroi Dresser
Im looking for a part that goes to a Leroi Dresser air compressor. Sorry but i dont know the name of the part its made of rubber and has the letters on it ROUSA Flex ACT 3 W REICH its the part that conects with the motor that turns the air compresor. The Model # on the air compressor 2A219-120 SS# 3184X162. The one I have has a large crack on it. You can reach me at (956) 455 8127 Please help. thank you for your time.➡️ Reply Leroi Dresser
2a116-407 Suction Valve assembly Leroi Model W40-50SS. This is the same Valve on W40➡️ Reply Leroi Dresser
I have a dresser series 400 compresser (s)# 453x15390 five hp.it was made in Sidney Ohio.. What I need is aparts list and a co. to by parts from Thank you j geer➡️ Reply Leroi Dresser
We are looking a spare list parts for portable LeRoi air compressor 1750, we need a diaphragm of the inlet valve➡️ Reply Leroi Dresser
Need this Part for 10 hp unit made in 1975➡️ Reply Leroi Dresser
Hello sir: I am trying to wire up a 10 hp Leroi comperessor model 660A. I need a wireing deogram for the 3ph pressure unloader switch. Do you wire it to the pressure switch? Drop me a line monday if you can. Also is there a parts book on the compressor . Paul➡️ Reply Leroi Dresser
I am trying to find a starter for my compressor LeROI 175 Rotary Screw Portable Air Compressor 1973 or 1974Compressor Model---- 175SG1-USN ----------------------291X277International EngineEngin Model------------UC 200-L- LO 24AEngine SN -------------34871Can you help me find the correct part or a part # Or somthing➡️ Reply Leroi Dresser
I have purchased a leroi, dresser compressor recently but the engine has not run for quite some time (5 yrs ?) and is obvious that it has had water in the heads and visible rust stains outside the block. Where can i find a comparable engine to replace this? It looks like this engine is a allis chalmers d-226 4 cylinder gas.➡️ Reply Leroi Dresser
i have a 1978 160 gas compressor with a 4 cyl. international. the drive coupling wore out & cost too much to replace. replaced muffler ,hasnt been run since. if interested call262 657 4662➡️ Reply Leroi Dresser
I also have a 160 leroi. Did you want one for repair or did you want to sell yours for repair?➡️ Reply Leroi Dresser
have a 1985 leroi 185 portable air compressor need a manual or a diagram of air lines or a serial number for one of these machines it has a perkins engine the cab was gone can find serial # anywhere➡️ Reply Leroi Dresser
Dear We have leroi Dresser air compressor in our project. we want local agent in saudi arabia kindly give me address for local agent.Thank You➡️ Reply Leroi Dresser
leroi air compressores type 440A tow staje➡️ Reply Leroi Dresser
inquiry about Model series 400 - 400A rerpair parts availability, LEROI DRESSER➡️ Reply Leroi Dresser
Can you urgently advice who Leroi Dresser agent in South Africa;ThanksChris➡️ Reply Leroi Dresser
Center cylender making a lot of noise. Starts quiet and quickly starts making noise. Is there a repair shop in the Indianapolis area?➡️ Reply Leroi Dresser
I need a elliptical trainer or any other good excercise machine, to use at home. are there any websites where i can purchase this item? so i can train at home. as this is the excellent product to take as it train all the body.➡️ Reply Leroi Dresser
Our compressor is needing service. The coupling between the engine and the compressor has failed.Please recommend the nearest service center.Thank you,JIM➡️ Reply Leroi Dresser
We have a customer with a Dresser compressor, model # 880A, ser# 4020x402. If this is your model please provide a parts breakdown & advise if you have a distributor in Canada.RegardsAllister➡️ Reply Leroi Dresser
Dear Sir,i am R.MAHESH,from CAEL,Doha,Qatar. i wants to do the 6 number of BOG compressor has to do the alignments and tuning at RASGAS,Qatar.Whom i will contact?pls let me know? i need your kind advise.i hopw that you may consider my request and do the needful,thanks & regardsRajagopal MaheshSr.Project Engineer,CAEL(Chiyoda Al Mana Engineering LLC),Doha.QATAR.tel # 00974 462 2926,ext:112.Mobile # 00974 6758376.➡️ Reply Leroi Dresser
gents,i need to know where the above subjucted parts is availabe for the LE ROIin saudi arabia➡️ Reply Leroi Dresser
I am looking for the Model 20-25-30SS II Installation-Operation, Maintenance and Service Manual➡️ Reply Leroi Dresser
i want to no the operation an the comp.sst 4078x15➡️ Reply Leroi Dresser
Please prvide pricing and availability on a gasket overhaul kit for aSeries 600 Serial Number:455X7411➡️ Reply Leroi Dresser
i needs parts for a leroi air compressor model # tru-5 two stage please reply as soon as you can please. thank you➡️ Reply Leroi Dresser
i am looking for the wiring diagram for my DOERR LR-13758 2hp motor model 90450-D XD. i need to convert it to 3 phase if you can please help ....... Thank You Luis Paredes cell (626) 373-6890➡️ Reply Leroi Dresser
We want to know if we can convert a leroi rotary compressor mod 20-25-30 SS to a vacuum rotary screw and what it needs to convert ,what does it takes and how much it costs to convert if its posible ,thanks in advance for your precious help. greetings from Mexico .➡️ Reply Leroi Dresser
having trouble with compresor over heating past 250 deg. what can i do to correct this➡️ Reply Leroi Dresser
Hi: We are looking for a parts list for a old type Larko slide gate operator if you are able to help us please e mail any for fax us @808-676-5800 and thanks for your help. Julie Lee at Servco Raynor OverHead Door Inc.Ph#808-676-3667 Pacfic time➡️ Reply Larko Electronic
I have a Larko Slide gate operator, I have no manuals or diagrams for this gate but am pretty sure that the control board needs replacing or repair. I was hoping to get a quote on repair costs. I dont know the model number on the board. My cell number is 843-343-8552. Thanks.➡️ Reply Larko Electronic
I HAVE AN OLD (1990)LARKO GATE CONTROLLER MODLE #MKI #41AND I AM TRYING TO FIND OUT WHERE I CAN GET PARTS FOR THESE UNITS. ANY HELP WOULD BE APRECIATED.THANK YOURUDY.➡️ Reply Larko Electronic
Were you happy with the help and any service you recived from Industrial Electronic Repair Tom➡️ Reply Larko Electronic
I have a Larko ASSY 30-45/46 cant read the modle# its a 1987 slide gate controller the boards have malfunctioned is there any service or replacement?➡️ Reply Larko Electronic
dear siri am behzadi live in iran i wanet to buy electronic parts for sell in the iranplease help me to buy this partsthanks➡️ Reply Larko Electronic
larko mark V logic board➡️ Reply Larko Electronic
How can I get a wiring schematic for a Larko commercial gate opener model MK T #40, ser. # 54431, built in Nov. 1990? Is there a service manual available? I would appreciate any help I can get on this opener. Thanks.➡️ Reply Larko Electronic
I need a estimate on a gate repair , The unit has no power past the low voltage transformer I think its suspect and could be out because none of the operation lights come on and I get 120V going in to it but noting comming out ......Make : Allister -larcoModel:Mark I-40Build year 1993 115 V @ 4.5 A If you could call me with some info I could used that would be cool....Dan Michelotti916-613-8777Michelotti-Engineering Lic# 830295➡️ Reply Larko Electronic
purchased in 1995➡️ Reply Larko Electronic
Need to replace sprockets on my Larko Mark I Gate Operator.Do you have any parts that work for that model.Or any suggestions.➡️ Reply Larko Electronic
Need to replace sprockets on my Larko Mark I Gate Operator.Do you have any parts that work for that model.Or any suggestions.➡️ Reply Larko Electronic
Experiencing issues with a Lunar Corp. 7635; specifically, the control board is malfunctioning, leading to erratic behavior in the industrial unit. Looking for repair assistance as soon as possible.➡️ Reply Lunar Corp
Subject Urgent Repair Information Needed for LINCOLN G3909-1 PCBHi ,We have a LINCOLN G3909-1 PCB that suddenly stopped working and were unable to locate a replacement. Can you please provide us with repair information and availability for this specific model? Any assistance would be greatly appreciated.Thank you in advance for your➡️ Reply Lincoln
Drive or board failure on Lambda k40059, need replacement ASAP. Continuing rounds, will address➡️ Reply Lambda
Dear Mr or Mrs Please quote the following Lodge and Shipley Shear Parts 101 MODEL 308 SERIAL 49304 22 O´RING CODE 11-3922 O´RING CODE 11-4122 FINGER CODE 11-4222 CUP NEOPRENE PROTECTOR CODE 11-4322 PISTON CODE 11-4722 SPRING DISC CODE 11-4822 SPRING DISC CODE 11-4922 ADAPTER MALE CODE 11-12466 PACKING TEFLON CODE 11-125T22 PACKING NEOPRENE CODE 11-125H22 ADAPTER FEMALE CODE 11-126 Please send price FOB MIAMI FL 33166 and weight and delivery time THANK YOU MAGALY POLO ASKY TRUSTskytrust@cue.satnet.net➡️ Reply Lodge & Shipley
Board is an Esab componet that operates an Esab PCM 750-iplasma cutter. Esab (L-tec) Part # 838008 Rev. C.➡️ Reply L-Tec
I have the subject plasma cutter and am trying to use it in a X-Y machine operated by my older computer. It works most of the time but it seems the high frequency start is killing the computer on occasion. Is there a way to disable the hi frequency start circuit ?Thank you Bill➡️ Reply L-Tec
My L-Tec Plasma cutter PCM VPI has a short in the circuit board, i can bend it up and it start working fine but I cans fine the open circuit or lose wire, Could I sent only the board for repair or is this thing worth repairing, Thanks, Clyde➡️ Reply L-Tec
tendran informacion de diagrama de tarjeta de plasma pcm-750i, numero de parte (8) 38008 ya que lo requiero.porque la estoy reparando favor de mandarme contestacion➡️ Reply L-Tec
I have an L-Tec Plasma Cutter with a capacity of 1-1/2 thick steel, 230V. It powers OK but the tourch not working. Please do you carry any.➡️ Reply L-Tec
At our facility here in Marietta, were currently using a number of DEECO Systems C9 Display Controller PCB 11763 Rev B. types. Recently weve had a couple of boards fail and we are currently exploring external repair options. The company that I represent, CAE-USA, would like a repair estimate and turn-around time from LUCAS DEECO of one of the C9 Display Controller boards. Thank You.➡️ Reply Lucas Deeco
I have this very old magnet charger and would love a spec sheet or manual. Can you help me?Thank you..Bonnie➡️ Reply Ldj Electronics
I have this very old magnet charger and would love a spec sheet or manual. Can you help me?Thank you..Bonnie➡️ Reply Ldj Electronics
I need a wiring diagram for a Leyland Faraday Model M431, 3hp, 230v motor. Mfg#PB184C17FB2D. Another # not labeled is#LR-33543. I think the motor is currently wired wrong and the wire box plate is not original. Any help would be appreciated.➡️ Reply Leland Faraday
I require a wiring diagram for a KEW 1640HA High pressure cleaner, unit is complete but the hot water/steam side will not work. Any help with a schematic will be greatly appreciated.thanks, Glenn.➡️ Reply Leland Faraday
Where can I find parts and a manual for a KEW 1840HA machine. Thanks Bill➡️ Reply Leland Faraday
I,m looking for circuit diagram of KEW high pressure cleaner 3040HA. Would You like to help me to resolve this problem➡️ Reply Leland Faraday
Hi I have a machine kew good 3040ha and I can not connect the power contactor, I see the winding water pump is burned and I would like to know how to put the said coil. We appreciate you send me the installation diagram of the coil. I would be very grateful and thank you very much.➡️ Reply Leland Faraday
new watertank➡️ Reply Leland Faraday
pdf I need to servicing the 3040HA kew pressure washer quickly!➡️ Reply Leland Faraday
I require a wiring diagram/Manual for a KEW 1640HA, KEW 3040H High pressure cleaner, Any help with a schematic will be greatly appreciated.thanks, Glenn.➡️ Reply Leland Faraday
Dear Sir,We would like you to provide us with relevant information and valid quotation for the following requirements,MACHINE TYP CLEANING MACHI NE TYPE CLEANING ELECTRICAL RATING 380/460VAC 8KW 60HZ FFT COLD WATER; 20-170 BAR; CAPACITY 500-1290 L/H; MAXIMUM TEMPARATURE 65 DEG C; NEW MODEL IS 100% CHANGEABLE WITH OLD MODEL 5203K ALSO ACCEPTABLE TYPE POSEIDON 1280; EGRO 3000; FLOW 1280; MANUF ALTO; 3 CERAMIC MADE PISTONS; 10 LITER DETERGENT TANK; 10M HOSE; COMPLEYE WITH ALL STANDARD ACCESSORIES: MNFR K.E.W. INDUSTRI AS MNFR PART NO HD 1294Qty: 02URGENT➡️ Reply Leland Faraday
Fault Codes showing P1, can you help?➡️ Reply Leland Faraday
I am after Fuel level sensor #6420303 and Temp probe #1119270. Could you give me an idea on price and how much delivery to Australia would be.ThanksJeanette➡️ Reply Leland Faraday
I have a Logan leathe in my shop M 1920 need to wire it for 220 volts need wiring diagram. thank you John Work➡️ Reply Leland Faraday
is there a way to adjust the contrast on the TAT34 LCD module?Or is it possible to get a datasheet and a scheme?➡️ Reply Lohja Corporation
We currently have 40 Lucas Deeco M3 Touch Panels and would like to obtain 40 Display/Driver Boards. I was wondering if you support this particular model and how many new touch panel displays you could provide.Jim Murphy➡️ Reply Lucas Deeco
Hi, I STRONGLY need some Touch Panels M3 Lucas Deeco. It may be not working, but not mechanical damaged. I can, and want buy 2-3 units , but if someone have only one Ill be very happy.➡️ Reply Lucas Deeco
I have some used working and some new old stock of the M320ST. let me know if you have an interest more info.➡️ Reply Lucas Deeco
Please advise what you have available for the M320ST panelss➡️ Reply Lucas Deeco
Could you please provide us with your better price offer (with a 6 month validity period, and stating your delivery time) for the delivery of the following item(s) :RFQ Details = PN 91750017NSN PART NO ITEM NAME Qty7025013663055 M320ST SU DEFENSE SUPPORT PROGRAM/726/777 5Delivery place : Fleury-les-Aubrais (France)Please use the following Reference Number : FDP9608 in your mailsBest Regards,PIGER Pascal (Pricing Manager) THALES AIR SYSTEMS SA➡️ Reply Lucas Deeco
looking for new old stock touch panels➡️ Reply Lucas Deeco
i found old information on the internet that you had a few M320ST-PL7 touch terminals.we are interested in buying them. do you still have them, or do you know were we can buy them.In the netherlands it is very difficult to get them.kind regards Jos van de VenFujifilm europe.➡️ Reply Lucas Deeco
DEAR SIR,WE ARE LOOKING FOR AND WOULD LIKE TO PURCHASE LUCA DEECOTOUCH DISPLAY AS BELOW.(NEW SURPLUS OR REFURBISHED)MODULE NO.: M320STQTY : 2 EAPLEASE ADVICE US, IF AVAILABLE.SINCERELY,STEVE HONGTERRASYS INC.➡️ Reply Lucas Deeco
We (Excellis) are a newly setup company in providing equipment trading and service contract. We are currently tasked to provide a contingency plan for Hewlett-Packard Singapore for the purchase and repair channel for LUDL and LEP parts. Pls would you do me a favour. SImply reply me with this email attached in your reply email. I need to address HP-S on the following. a) STAGE,TWO-AXIS 8X 8LEP P/N 99S923-S S/N:141891b) STAGE,X/Y 200mm$9,407LEP P/N 57007 S/N:056646c) X/Y Stage Controller MAC22 7ENCLOSURE LEP P/N 73002001 S/N: 142163I could send you a picture if you cannot figure these LEP part number.thanksMahani Tang➡️ Reply Ludl Electronic
Hi there I own a 375cfm leroi compressor and am in need of a parts and service manual for this compressor and am wondering if you would possibly sell this or if you know where I would be able to purchase onemy model # A219-106 Serial # 3138X67. Any help would be greatly appreciated. Thanks Marc➡️ Reply Leroi Dresser
I HAVE THIS MODEL WHICH IS IN GOOD CONDITION,BUT BY MOVING IT TO OUR NEW LOCATION THE COPPER LINES LEAVING BOTH HEADS TO THE END COVER AT THE CRANK WERE RIPPED OFF ,SO MUST THEY BE RECONNECTED AND WHAT DO THEY DO AND WERE DO YHEY GO.IS THERE ANY WAY YOU COULD HELP ME BY SENDING ME A MANUAL OR A SHEET WITH THAT PROBLEM THAT I HAVE ..THANK YOU VERY MUCH.. NORM... FAX#705-474-8891 OR E- MAIL@ norm.blais@cogeco.ca➡️ Reply Leroi Dresser
hi thear steve at bigkidtoys.com looking to get parts fore a 550 leroy cmpresser need in and out valvs and all gsk.s and such 707-294-0133➡️ Reply Leroi Dresser
hello, could you please tell me the cfm for a leroi dresser compressor;series:A219-107; s/n 4141X1153. thanks in advance for your co-operation!➡️ Reply Leroi Dresser
Model 1a 219-132-6 What is the CFM of this 100 HP compressor?➡️ Reply Leroi Dresser
Can anyone please help with instruction book for the above compressor➡️ Reply Leroi Dresser
just aquired 2 a219-180-g17 electric air compressors and would like to find some manuals etc. Also they dont have sound enclosures and i would like to purchase some or build a quiet mechanical room to place units in along with a r800a pioneer refridgerated dryer. Any suggestions more than welcomed. thanks,john➡️ Reply Leroi Dresser
two stage model:44A 5HP 3PH 60HZ➡️ Reply Leroi Dresser
We need information about serie 100, serial. 459X10722, Leroi Dresser air compressor➡️ Reply Leroi Dresser
we have a leroi Dressor comperssor model #A219-92➡️ Reply Leroi Dresser
Need a manual on a H375 Leroi mod.3138X264, serial#3138X264 compressor➡️ Reply Leroi Dresser
Looking for a brakedown , and specs on this compressor and parts availablity would be grake as well➡️ Reply Leroi Dresser
would you please answered below my question.1.)how con commissioning no-load test compressor type 4E3+BALANCE LINE CE-55985? 2.)during the fist start up when we REACH the speed more thane 37oorpm by turbine drive low speed gear vibration AND tried what is you recommended ? we check alignment everything correct. BEST REGARDSR.AHMAD I➡️ Reply Leroi Dresser
would you please answered below my question.1.)how con commissioning no-load test compressor type 4E3+BALANCE LINE CE-55985? 2.)during the fist start up when we REACH the speed more thane 37oorpm by turbine drive low speed gear vibration AND tried what is you recommended ? we check alignment everything correct. BEST REGARDSR.AHMAD I➡️ Reply Leroi Dresser
We need parts for a LeRoi 256S2C like rings (8 1/8) diameter, suction and discharge valves and other parts, please tell me if you can get parts for us➡️ Reply Leroi Dresser
I would like to purchase a service manual for a 400 Leroi Dresser air compressor. #153x18674. Thank you➡️ Reply Leroi Dresser
Dear Sir,Have a nice day!I am Mr. Mya Than Soe, Senior Manager fo WIN ENGINEERING CO., LTD. We WIN ENGINEERING is major trading in Myanmar.I would like to request the quotaiton for Dressor Leroi Air Compressor under mentioned.Dressor Leroi Air Compressor UnitModel – 880 ABare Pump (Without Motor and Tank)Horse Power Range:15-25Maximum Cap@ 125 PSI:97.4 CFM, 1,033 RPMMaximum Cap@ 175 PSI:87.5 CFM, 916 RPMMaximum Cap@ 250 PSI:66.2 CFM, 667 RPMACFM 100 PSIG:82.8 - 97.4Qty – 2 UnitI am looing forward to your earliest reply.Please do not hesitate to contact us for any further information.Thanks & Regards,Mya Than Soe (M.Than)Senior Manager WIN ENGINEERING CO., LTD.winengg@myanmar.com.mmwww.winengineerings.com➡️ Reply Leroi Dresser
I need a complete copy of the service manual and parts manual for thiscompressor. (I believe it was manufactured in 1982.)➡️ Reply Leroi Dresser
voir partie compression➡️ Reply Leroi Dresser
I have a cylinder head that needs to be repaired. needs reed valves and a head gasket. Where do I need to send it for an estimate? I need to know ASAP. Thanks Ron.➡️ Reply Leroi Dresser
do you sell an owners manual or repair manual for this model?➡️ Reply Leroi Dresser
i m looking for a spare parts catalog leroi 185 cfm➡️ Reply Leroi Dresser
What is the CFM of Le Roy dresserModel 256 S2Serial 462X789Thank,Sylvain➡️ Reply Leroi Dresser
Please indicate current pricing and availability of P/N 15-1815 Pressure Relief Valve for Lerol Dresser Air Compressor Model 550➡️ Reply Leroi Dresser
HI I am looking for service kits for the above machines and cant find some one here to assist, Can u please help.Regards➡️ Reply Leroi Dresser
I have inhereited a Leroi Dresser Air Compressor. Im looking for the specs on this air compressor.Thank you.➡️ Reply Leroi Dresser
anyone know where I can get a parts book for this..➡️ Reply Leroi Dresser
I Have been using Leroi Compressor for the past 20 years i recently boughta newer model it will not hold the air in the tank with the valves shut off i think i know where the air is escaping from but i do not know the name of that particular part and i dont have a manual for the 660A.thanks,➡️ Reply Leroi Dresser
hi there,I need the information for the capacity (cfm) of air compressor Leroi Dresser series 660A. Also the maximum vacuum of this unit.Thank you & regards,➡️ Reply Leroi Dresser
Dear Sir,We have the above Air Compressor Model Number-Q1500DC in our possesion and are performing a basic service...I noticed on the coolant manifold a broken coolant temp shutdown sensor...leading to the Positive Air Shutoff Solenoid. Are you able to give me any info on where I can pick up this sensor. Thank youT.ThompsonIntequip Mining Sales➡️ Reply Leroi Dresser
WE NEED AS SOOM AS POSIBILITY THE FOLOWIN PARTS.FOR THE UNIT LERIO 1600 , MODEL A219-148-3, SERIAL 3165X95COUPLING (1 )BEARING 7313 BE.GAP (2)BEARING 7214 BUO ( 3 )GEAR P.O.P. 036.45.0 (1)GEAR P-O-P- 036.45.1 P/N 26944-2 (1)➡️ Reply Leroi Dresser
Leroi Model CL20CUB➡️ Reply Leroi Dresser
Hi, I am looking for a manual for a leroi dresser model Q160G, any help would be appreciated.ThanksMatt➡️ Reply Leroi Dresser
need a electrical diagram for a wayne air compressor model #550 (lerio dresser )➡️ Reply Leroi Dresser
need a manual for this compressor. please quote➡️ Reply Leroi Dresser
Has oil, new filters?➡️ Reply Leroi Dresser
I got a compressor leroi.Model 4A219-84-3Serial 4151X171And i need all manuals, Parts and operation.Tanks.➡️ Reply Leroi Dresser
please send or tell me where to find!!! tks. johnny por➡️ Reply Leroi Dresser
Model Q185DS/N 3449X50L➡️ Reply Leroi Dresser
buen dia fueran tan amable de enviarme un manual de operacion y de partes de dos compresores marca Leroi.mod: B75 SS A69-694-1mod: 4A219-85-2➡️ Reply Leroi Dresser
Model Q185DS/N 3449X50LLe ROI air compressor➡️ Reply Leroi Dresser
I LOOKING FOR LE ROI 550A SERIAL NO 4017X2168 COMPRESSOR OPERATION INSTRUCTION PARTS MANUAL.➡️ Reply Leroi Dresser
I need a service and repair manuel for this compressor Serial # 2023X241 and a parts manuel if not in the repair manuel➡️ Reply Leroi Dresser
i have a le roi 125. model a219-92 serial 3132x333.it is loading the engine on startup until it shuts itself down.➡️ Reply Leroi Dresser
i need the main barring . piston pin and bushing for the small piston in the pump. can you help me out?thanks chris847-778-2787➡️ Reply Leroi Dresser
I have a number for Wayne Vaughn Equipment Co. and they have the wearing parts you need. They dont have a lot but I know you can get those parts. I need a crankshaft for my pump, can you help me? Let me know, 517-898-1881➡️ Reply Leroi Dresser
would like to know were to get vavles for the head cyl thanks george609 567-2295➡️ Reply Leroi Dresser
Need a insert bearing h21-978➡️ Reply Leroi Dresser
Actually I have a Leroi compressor model CL 30 CUB and I need some parts for it but, I do not have the parts manual or the operation one.I would apreciate a lot if you can help me to get it.Thank you in avance.Frank Espino➡️ Reply Leroi Dresser
i´m looking for a manual for a compair leroi cl20ss.i would apreciate a lot is you can help me. thanks!➡️ Reply Leroi Dresser
Good afternoon i need the manual for my compressor leroi CL30 CUB because i need to replace some parts.If you can sale the manual i appreciate that.Thanks.➡️ Reply Leroi Dresser
I am looking for a complete rebuild kit and service manual for this air compressor( Model 5000, S/N 4005X5330). I dont know if there available, so if anyone can help me that would be great. Thanks.➡️ Reply Leroi Dresser
hi i have a 1600 comp,when i load it up it sometimes goes and sometims not,its like the engine isnt picking up the rpms,it will idle at 1300rps sometimes but it seems to just want to kill the engine.it has a cat engine,i even hot wired the fuel shut off just incase that was the problem,i know it is something simple but it has me beat,can you give me a few tips on a possible problem..Joe➡️ Reply Leroi Dresser
looking for the air regulator valve, compressor air filter and engine air filter.The model number is 2a219-120the serial number is 3184x127engine serial number is cd3179d846938model number 3179dfQuadrozzi Concrete Corp.718-474-4333cell phone 917-299-5138 Thanks➡️ Reply Leroi Dresser
hi i have a leroi dressor compressor modelq160de ser3033x340 rotary vane compressor needs about 150.00 worth of parts and they are available but would like to sell this unit asking 1000.00 for it the johndeere engine runs great you can call me at 754-456-1906➡️ Reply Leroi Dresser
Model 85rgewSerial 2022x156➡️ Reply Leroi Dresser
I have a 5 hp. electric Dresser compressor and the centrifugal unloader is not operating. Is there an adjustment for this system. Any help with this would be appreciated. Thanks Brad➡️ Reply Leroi Dresser
I am looking for a service & parts manual for a Le Roi 256 SDS Air Compressorwhat is the CFM & max pressure ?Model 256SDS SN 462X1421➡️ Reply Leroi Dresser
we have a leroi dressor compressor model #A219-92 and serial #3132x797 build in 1989 with a perkins engine and having trouble building air pressure and dont have manual book on it could you help with this info➡️ Reply Leroi Dresser
Need upper end rebuild parts Series 800 LeRoi/Dresser air compressor Serial # 458X5251 20 H.P.➡️ Reply Leroi Dresser
Need a manual for this compressor and need to know what size motor should be on it. Thanks➡️ Reply Leroi Dresser
We use a 3HP.➡️ Reply Leroi Dresser
Need a manual for this compressor and need to know what size motor should be on it. Serial number 40052X4064 Thanks➡️ Reply Leroi Dresser
LEROI DRESSERMODEL 130SSSERIAL #4081X488WOULD LIKE TO BUY A SERVICE MANUAL➡️ Reply Leroi Dresser
helloIm looking for a service manual for a Le roi dresser air compresser.Modle 1755 DIQ4 cylinder Deutz air cooledIf you could e-mail me back would be well apreciatedthanks➡️ Reply Leroi Dresser
Serial # 3138X226. The unit will not deliver any compressed air. When the valve is opened, it gives one little poof and nothing more. It seems to be making compressed air because when I shut the engine off, the compressor blows down. It was working fine up until this problem. Can you tell me whats wrong?Thank you,john mitchell540-955-3120➡️ Reply Leroi Dresser
Compressor wont build up pressure beyond 60 psi, new regulator set at 110psi. Compressor has been slowly declining and wont shut off➡️ Reply Leroi Dresser
Have a 515-0192 for sale. $400 Can send pics if interested.➡️ Reply Leroi Dresser
need a part # on motor coupling machine serial # is a219 152 g16➡️ Reply Leroi Dresser
Would you beable to tell me the CFM out put of a LeROI Dresser Compressor Model 256SDSRegards Klaus Eisner➡️ Reply Leroi Dresser
I have a LeRoi air compressor, serial # 3120x250. I found another # A219-89. Assembled @ Dresser Industries Inc. Sidney, Ohio. 62-48 I have a few issues with it. First issue is over heating. So I should probably install a new thermastat, but cant seem to find and purchase in my area. The second issue is, leaking at the oil cooler which is located between engine oil filter and engine. Cant seem to find a replacement part for that either. I do automatic underground sprinklers, which need to be blown out every fall to keep from freeze damage duing winter. I am in a bit of a hurry because it is my only compressor and my one thousand costumers are counting on me to blow out there sprinklers. A quick response to solve these problems is very appretiated.➡️ Reply Leroi Dresser
i have a compresser that is mixing oil with the air i need a break down so i can figure out the problem or if you can just tell me what might my problem could be thanks➡️ Reply Leroi Dresser
I have a 1988 Leroi Serial # 3120x112Model # A219-89 I have a question?If your compressor is low on oil will that preventit from starting. The fuel is not getting to the injectorsthe fuel filter is full but its not getting to the motor.What could the problem be. Can u help me. Thanks Dave.➡️ Reply Leroi Dresser
I have the serial and model number for this pull behind air compressor. If you could find out when it was built and were I could find a owners manual and repair manual that would be great.Serial #2057X22Model #0100RGW➡️ Reply Leroi Dresser
Hi Sr. I have a air compressor Leroi Dresser model: 660A (S/N:4018X4657).Price for: gaskit set piston ring set all valves air filter service manualShipping caost with Fedex to Nederlands Antilles Thanks:Raymond.➡️ Reply Leroi Dresser
Hi Sr. I have a air compressor Leroi Dresser model: 660A (S/N:4018X4657).Price for: gaskit set piston ring set all valves air filter service manualShipping caost with Fedex to Nederlands Antilles Thanks:Raymond.➡️ Reply Leroi Dresser
need a manual for a Dresser series 3000 ser. #4004x434➡️ Reply Leroi Dresser
would you please send me commissioning manual for reciprocating gas compressor type 4E3+balance line with turbine drive and high speed gear.beast regardsreza ahmadi➡️ Reply Leroi Dresser
Looking for a parts breakdown and/or service manual for a LeROI DRESSER Series 350K rotary air cooled electric compressor.➡️ Reply Leroi Dresser
I am attempting to secure an Installation, Operations and Maintenance (IOM) manual for LeROI 3274X30 (S/N 1A219-89) Air Compressors. I am developing maintenance procedures.➡️ Reply Leroi Dresser
I have a 175D Portable compressor. Engine will not accelerate when there is a demand for air. Need help with troubleshooting and parts.Thanks Tom➡️ Reply Leroi Dresser
I have a 125 compressor series Q125GH-H and would like to get a parts and service manual for the product. Serial # 2205X18 Mfg. date is 1990➡️ Reply Leroi Dresser
I purchased a used air compressor and i need to change the oil and i need to know what type of oil to use.➡️ Reply Leroi Dresser
Unloader valve working MOST of the time, but one failure almost started a fire. Would like advice on how to determine whats wrong. Disassembled, cleaned and reassembled. Found nothing suspicious. Still doesnt unload each time as it should. Parts estimate please.➡️ Reply Leroi Dresser
I bought an air compressor at an auction, just the tank and compressor, no electric motor. It is an 80 gallon tank, two stage compressor. The compressor name tag says, Dresser Model TRU-7.5, S/N 250687-07. What size electric motor do I need? Either 120 or 240 volt, and at what RPM is it supposed to run at?Thanks for any info.Mark➡️ Reply Leroi Dresser
Welcome to the world of adult Dating loveawake.ru➡️ Reply Leroi Dresser
Hi, I have a L-TEC brand plasma cutter pcm-7501, p/n 32905, serial a93b41632 and was wondering if I could ask you a question or three about it?My questions are,it will power up fine, and when you select air test, that function works as well. There is no fault light on, but the problem is that the unit will not do a thing when you push the trigger. We have tried changing the tip consumables out with new parts, and checked the trigger also. It tested fine. Is there anything that I could do or test before I bring it in to get it tested? Is there a common problem with these machines that maby i could fix? and lastly, If the circuit board is bad, how much for one and is it even worth fixing this machine.Sorry for the long post and thank you for your help!Ken➡️ Reply L-Tec
The problem is probably in the trigger or broken wiring back through the leads. If you have any of the electrical drawings, they should show where to close the connection inside the power supply to fire the torch. If it fires that way your problem is in the leads or trigger.➡️ Reply L-Tec
I NEED A SHAPE BOARD FOR MY L-TEC UCNC -8 PLASMA 810 OR A WAY TO HOOK UP A PC I HAVE MODEM BUT THE CABLES WANT GO TO MY XP USB AND A PROGRAM TO RUN IT . THANKS TEWLL RUDY IT STILL NOT WORKING➡️ Reply L-Tec
I have a L-TEC PCM UP1 plasma. Serial#a93a 34529.When I turn it in the fan comes on but nothing else will work. Help➡️ Reply L-Tec
I cannot get to work. I do not get anything on screen. This equipment was purchased in 1980 for cnc plasma cutting system for ductwork. I messed up origional software few years back. thanksballi➡️ Reply L-Tec
i need parts for my machine hopfuly u can help me thx kent jarrell➡️ Reply L-Tec
I have an L-Tec PCM750i plasma cutter, the power is on, air going through, the fault light on, fuse is good, arcs at the gun but will not cut.➡️ Reply L-Tec
The power turns on, air is going through, the fault light is on, fuse is good, arcs at the gun but will not cut. I have already stuck $1,300.00 into this machine in repairs.➡️ Reply L-Tec
i need manual for this Plasma Machine , Model:- PCM-100Plasma Arc,L-TecHope to receive the same.➡️ Reply L-Tec
my overload light is on everything esle seems to be working what do you think it is and or what can i try➡️ Reply L-Tec
Hi . Im looking for L-Tec Compact aircut 25 diagram for my Telwin plasmarc 250 (I know its strange but both of units are similar construction)Telwin forgot about this machine - have no diagram they sad its to old ...What is cost of one of parts that L-Tec plasma cutter -I mean HF transformer electronisches zundgerat SIG 3.2 .Its grey box made in west germany with 4 pins (marks HB HO TO T24 ) Regards Witek from Poland➡️ Reply L-Tec
Hi I can give you systems like the zundgerat PLasma ignition systems , quite reliable they work very well for plasma , and TIG we make our plasma systems , we use them in these plasma machines.proarcindia.com➡️ Reply L-Tec
Kindly tell me how to repair the L-TEC- CB7WB , Model VI502 , there is problem in the holder and also the plasma cutter holder is not available in the local market ,second the holder fot the co2 welding also not working can i purchase it form u thanks give me a call 00923339500248➡️ Reply L-Tec
Unit quit working and I would like to find out if it is worth repairing. I,m retired now and would like to use it once in a while.➡️ Reply L-Tec
This is a 220 unit that was pluged into 480 is it worth repairing .Thanks➡️ Reply L-Tec
Do you have someone in our area that works on the L-Tec machine➡️ Reply L-Tec
I have an L-TEC PCM-VPI plasma cutter. It doesnt work, I took it to Valley Welders Supply in Billings, they told me that it needs a new circuit board. What would be the cost and/or is it cheaper to buy a new plasma cutter?Kind Regards,Mike➡️ Reply L-Tec
i need 2 encodersmodel: k15dd 6a5e,0080p/n 6-111868-0080➡️ Reply L-Tec
I am looking for output diodes for the above unit. The console has a pn of 31746 and SN: a93a 31328.I spoke with Jamie @ esab. They can only come up with the doide module pn: 951902 and that part is obsolete.This unit has the individual output diodes, I believe two forward and two reverse polarity.Thanks,Pat➡️ Reply L-Tec
i have a pcm 32 i, and the light overload is open (is red) the machine ist doesnt work ,what is the trouble?➡️ Reply L-Tec
Dear Sir,We would like to introduce ourselves as registered supplier/indenter of various types of machinery/tools/Raw Material/electronics items with many of government and private sector organizations in our territory. One of our customers would like to purchase below mentioned items on urgent basis. S #ITEM DESCRIPTIONUOMQTY1MECHANIZED PLASMA ARC CUTTING TORCH WITHOUT RACK PT-20M (L-TEC, USA) 100 AMP P/NO 20593NO.1You are requested to please send us the literature along with your offer on FOB/C&F Basis for submission to the customer. You are requested to please reply through return mail. We are anxiously waiting for the reply. Thanking you in anticipation. Best regards Mobeen Ashraf Manager International Purchase Department Nazir & Sons International 2ndFloor, PrachaPlaza, Near Municipal Committee Office, Faisal Shaheed Road, Taxila, Pakistan. Ph No: 0092-51-4547995 Fax No: 0092-51-4547997 E-mail: nazirsonpvt@yahoo.com➡️ Reply L-Tec
My machine does not work and cannot use L-Tec 810 controller to to do anything.I just get black screen➡️ Reply L-Tec
I do not have existing Ductling II software. L-Tec 810 screen comes on with white dots filled and no instruction to do anything. Advise 202-438-0224➡️ Reply L-Tec
Hi I have L-Tec 7501 plasma cutter 220 single Ph was pluged into 440 is it repairable Thanks➡️ Reply L-Tec
I need the wiring diagram for a leland faraday motor for my air compressor the modell # xm005 thank you Darryl Hendricks➡️ Reply Leland Faraday
I have a requirement for 2 ea. thermocouple gauges, P/N P582004-01. Can you furnish?➡️ Reply Leybold-Heraeus
Good morning Im searching for the following parts. Is it possible to give us a price and delivery time for these parts? KF25ANCR Centering ring NW25 DN25KF Aluminium - neopreen 2 PIECES KF16AVCR Centering ring NW16 10 PIECES KF16C CLAMP NW 10/16 Aluminium DN10/16KF 5 PIECESThanks in advance Els GeudensWarehouse Belgonucleaire Europalaan 20 2480 Desselmagazijn@bndessel.be➡️ Reply Leybold-Heraeus
A system Z400 is used sussessfully for decades in our Lab. A reliable and easy-to-work-on piece of equipment.➡️ Reply Leybold-Heraeus
Hello. I recently purchased a used 60-gallon air compressor which appears to be about 50-years old. It is driven by a L-F motor. It was wired for 220V operation. There is no diagram to convert it to 115V. The wires have small, narrow colored strips of tape around them which appear to be from the factory. If you have any data or diagrams for wiring, please advise the method & cost for obtaining them.Data from the plate is below. Any assistance you can offer is appreciated. I can forward a photo if that will help. Thank You.Frame: AA204 AMPS: 19/9.5 FREQ: 60RPM: 1725DUTY: Cont CODE: J SF / .15➡️ Reply Leland Faraday
what size in ohms is the resistor on the pcb card no25273uaa 317322m 96. i have one but the resistor is burnt out and i do not know the size of it it is located at the bottom right hand side running north south there are two items running north south but this is towards the bottom. any help would be very welcome thanks➡️ Reply Lester Electrical
I have a complete series 5000 minus the tank. It it mounted with a 10hp Kohler engine. What is the output of this compressor? I cannot seem to find any information on it via the web.Thanks!➡️ Reply Leroi Dresser
i am looking for the small piston in the pump, main barring, piston pin and bushing for DRESSOR LE ROI MOTOR 5000-1 S/N 4005X222787Can you help me out? email me or call Chris at 847-778-2787.. thank you.➡️ Reply Leroi Dresser
I picked up rebuild kit for my 5000 dresser compressure. I was told Id needed special tool for removing valves. How much tourk are on these valves? I also need tourk specks on this unit.➡️ Reply Leroi Dresser
Do you have a crankshaft for the Dresser 5000? I need one.. call or email me. I have the specs you need, Ill give them to you.➡️ Reply Leroi Dresser
I have an older Dresser series 5000 Compressor witha 5hp GE motor on it.I do not have the ability to hook up the 3 phase motor and so am wondering what hp gas engine I would need to power this unit?.Ive seen that it is difficult to find info on this series .It is just for home use and I got it for next to nothing as it is older.Any help would appreciated.Jordan➡️ Reply Leroi Dresser
Machine issue Larko 01055 displaying error message Board Failure. Unable to resume production. Need urgent repair.➡️ Reply Larko
To Whom It May Concern,My name is Diana Nguyen and I am currently a student at the University of Konstanz. I am actually working with a very old piece of equipment from Leybold Heraeus that is giving us a bit of trouble. I was wondering if you could help in some way? The technical problem in question is actually a electronical connection in a cooling head with the serial number : 018715-89111. The cooling head just recently fell apart and one of it´s connection broke off. The connection is tied with a temperature controller, such that when we try to raise the temperature in the cooling head to make it hotter, the temperature actually decreases, making it colder. We are trying to fix it but need a blue print or a manual. Any help would be greatly appreciated.Sincerely,Diana➡️ Reply Leybold-Heraeus
: My Logic 1121B unit has developed a fault with its circuit board. The unit is no longer functioning correctly and displays error messages whenever it attempts to operate. Specifically, the unit wont power up at all. It seems that the issue lies with the circuitry on the circuit board itself as other parts of the unit seem functional. I have contacted several technicians who suggest a potential replacement cost around $800-$1,000 for this repair. This is causing considerable disruption to our workflow, especially given the critical role of the unit in our daily operations. We would greatly appreciate it if you could advise on a possible course of action. Should a full circuit board replacement be necessary, we would like to know about your turnaround times and expected cost-effectiveness for such a service.:➡️ Reply Logic
I have a Leland Faraday motor that I can not get referenced. Can you help?Stock # M-680EHP: 1.5RPM: 1725Volts: 208, 230/ 460Phase: 3Insul: class BFrame: LA56Hduty: Cont.Type: SCModel #: 8-182446-01➡️ Reply Leland Faraday
Other than it is obviously a touch screen panel, what does it do?Is it possible to connect it to a PC running windoze XP?If so, how do I connect it up and what may I expect it to do?I have two machines running on a hardwired network and a laptop via wireless ethernet modem. Could this unit be used as a remote input device, say at the entrance to the church?Again, if so - how so? If not - why not?Thank you for your time.➡️ Reply Lucas Deeco
We received some Willet Labeljet lable applicators from one of our plants that was closign. I beleive they are either a model 2100 or 2110. I would like to purchase manuals for them. Do you see the manual for the older labeljet applicators.ThanksFred JohnsDay Timers, Inc.www.daytimer.com➡️ Reply Labeljet
Poseeeos una aplicadora de etiqueta para la cual debemos adquirir repuestos y no tenemos inforamacion.gracias por su respuesta.➡️ Reply Labeljet
I am assisting a machine shop owner of selling excess tools and parts that he has accumulated over 35+ years in business. Came across a labeljet 2100 controller and labeljet 2112 rewinder. Both of these look to be unused and have been in storage in this machine shop for many decades.Do you have any interest to purchase these for parts for your repair business?If your interested, bounce back on my email and I will send you some pics➡️ Reply Labeljet
We have not used the labeljet equipment for a few years, intersted to find out if it works, also we need a manual.Do you have a manual for this model?➡️ Reply Labeljet
We have not used the labeljet equipment for a few years, intersted to find out if it works, also we need a manual.Do you have a manual for this model?➡️ Reply Labeljet
We have a table top labeler what we can not get the drive roll to kick on can you help??➡️ Reply Labeljet
We have willet applicators 2620 used with Sato print engine s8485s. Wondering how I can lower the air blast time. I adjust the dial numbers but the air blast duration stays the same. Is there a jumper on the board I can move?➡️ Reply Labeljet
i have a lelan faraday motor model # m-546da . i would like to know if that motor is reverisable or not. i would like a wireing diagram for that model . thank you➡️ Reply Leland Faraday
I have one of your motors model # 8-186701-01 and Im looking to purchase another one just like this one. can you tell me if this motor is still available or is there an equal to this. Also where in the Boston area can I purchase one? Thank you, Greg Pink➡️ Reply Leland Faraday
Hi, I have 2 off C9 Display controllers (PCB 11763 Rev B) without backlights. I would be grateful if you could give an approximate quotation for the repair of these displays. I know you would like to see the displays first, however as I am in the UK and after receiving the quote, if I do not accept it I will have incurred shipping costs and possible duty charges. I would be grateful if you could contact me as soon as possible as I have a customer with a system that is down due to the display.I look forward to hearing from you.RegardsNigel.➡️ Reply Lucas Deeco
: Our industrial printer has been experiencing recurring issues with paper jams. Despite troubleshooting, including cleaning the rollers and ensuring proper paper loading, it continues to jam frequently. It produces a high volume of printouts for our business, and this consistent failure is impacting productivity. Weve estimated that replacing the entire printer would be around $5,000 - $7,000, depending on features and models. Could you offer any repair options or suggestions before we consider a replacement?:➡️ Reply Lowrance
Looking for a parts manualThank you Ted➡️ Reply Louis Allis
could i buy the manuals for a 1984 185cfm leroi compressor it has a perkins deisel .thanks mike griffin➡️ Reply Leroi Dresser
could i buy the manuals for a LEROI DRESSER 1500CFM 100PSI3054X27 NOT SURE ON THE YEAR THANKS➡️ Reply Leroi Dresser
I have an older CC14V monitor that has a 9 pin VGA connector, I cant get it to power up using a 15 to 9 pin adapter. It appears the input does not match the standard VGA pinouts. Do you have any information that would alow me to run this monitor with the VGA output from a computer?➡️ Reply Lucius & Baer
Dear sir or madamplease let me knoew pin layout of 9pin adapter cable to 15 pin (3 row) for monitor CC14V .thanks vahid nikfarid➡️ Reply Lucius & Baer
Where I can buy the monitor Type: CC14V?➡️ Reply Lucius & Baer
Best regards, I need the pinout diagram of the 9 pin CC14V monitor thank you for your help.➡️ Reply Lucius & Baer
I have a Leroi Dresser model 500, that I would like to rebuild. Do you offer any rebuild kits for them?➡️ Reply Leroi Dresser
What kind of oil does this compresser take➡️ Reply Leroi Dresser
Model M-295E single phase motor. Is it possible to reverse the motor direction and if so, which wires would I change.Motor used in heating system, and running backwards, its trying to force water back to radiators, instead of to the boiler.➡️ Reply Leland Faraday
we have a 5 hp, 1740 rpm, 24.5, single phase stock # sm-005b motor to drive a compressor. we manufacture solar heating panels and finally the business is starting to pick up where we can justify using this compressor. the wiring schematic is gone. can you either help with the wiring schematic or direct me to a website that can?thanks for the consideration➡️ Reply Leland Faraday
dear sir,please send technical document of TSR.4Q83 thank youm.j.dashti➡️ Reply Labod Electronic
dear sir,please send technical document of mikro nc80 thank you➡️ Reply Labod Electronic
hellomy driver only move to forward but dont move to backward while turn on to both direction red led(ic tl604cp behind) is active but i dont have output to backward direct.please help me about that.andplease send me technical document of GN1DZ-4QBOthank youa.abedintash➡️ Reply Labod Electronic
kindly furnish the 9-pin signal diagram for LUCIUS Baer monitor model CC14V-CH for testing purpose.➡️ Reply Lucius & Baer
I need a drive motor, part no. 200-00-021 for my processor. I can install it myself, just need the part. Can you help?➡️ Reply Logetronics
could you please send me the operators manual for the gaussmeter model 511 or tell me where i could find one. thank you. Always A Friend, Herby➡️ Reply Ldj Electronics
I HAVE AN L D J MODEL 101-B GAUSSMETER AND AND A MODEL HP 3161 AXIAL PROBE IN NEED OF REPAIR. CAN YOU HELP OR RECOMMEND SOMEONE IF YOU AREUNABLETHANK YOU➡️ Reply Ldj Electronics
Please help I need the wiring diagram for a Leland Faraday electric motor, 3hp 1740 hp stock # xm003b date code dy Sincerely, Alan dapp➡️ Reply Leland Faraday
Hello, My Lepel Unit will not give any heat and my RF power Light comes on but my analog meter do not show any voltage? Thanks ahead for any troubleshooting methods.➡️ Reply Lepel
Hi there, Im new on the team and trying to assist with the LABEL AIRE 0031013. Im not entirely sure what it does, but Ive been told its not working. Any additional details you can provide would be appreciated. Thank you!➡️ Reply Label Aire
Hi, I have 2 LL1200 beacons I picked somewhere. My question is, what would it take to set them up to run on a 12 volt system instead of 36volt. I would like to install them on a street sweeper. Or just get some new ones? thanks John➡️ Reply Lectric Lites
I am looking for a Lectric lites LL809 do you have the replacment bulb for this application?➡️ Reply Lectric Lites
i have a leland faraday 5hp electric motor it is 3 phase. model #smd0367. i need a wiring diagram➡️ Reply Leland Faraday
WE ARE LOOKING FOR AND WOULD LIKE TO PURCHASETHE BELOW ITEM.ITEM : DISPLAYP/N : M320ST-P3QTY : 2 EACONDITION : REFURBISHEDPLEASE INFORM US, IF AVAILABLE. THANK YOU.B. RGD,STEVE HONG➡️ Reply Lucas Deeco
Hi there just enquiring if you know any one in New Zealand that can repair this particular touch screen?➡️ Reply Lucas Deeco
Does anyone know where I can purchase a manual for a LeRoi W75SS compressor?➡️ Reply Leroi Dresser
necesitamos por favor manual de partes e instrucciones de un leroi modelo WH75SSAgracia spor su ayudaelkin garces➡️ Reply Leroi Dresser
I need parts for a Le Rol Compresser Moden A219-120 Serial 3112x716 and a book➡️ Reply Leroi Dresser
what is cfm of 700 series and what electric hp is required➡️ Reply Leroi Dresser
I have a Dresser Series 550-A serial #4017x5185 and would very much appreciate a manual or some advice on maintenance.ThanksJR➡️ Reply Leroi Dresser
Can I find manual(s) parts lists based on the following:The only plate on my compressor says:Leroi Dresser air compressor noise compliance with a date codestamped on plate is 2044X30It is a rotory screw oil/air powered by a ford straight 4 gasoline engine what I call a pull behind. No other labels are appearent can you help?I would really like to find a good manual. This machine has served me well for the last three years. I bought it used of course. I want to have it for many more years➡️ Reply Leroi Dresser
Hi, i have a air compressor dresser serie 600 455x5732i want a pieces of maintenance : air filter, oil(type) strap i search informations of this type of compressor. Do you have this information ? If yes do you want give me ? Thank-u p.s excuse my english im a french Canadian of Quebec.➡️ Reply Leroi Dresser
i dont get any air➡️ Reply L-Tec
I WAS WONDERING IF YOU MAY HAVE INFORMATION (SERVICE) FOR AN OLD WAYNE MODEL 6300-3H COMPRESSOR. ANY INFO WOULD BE APRECIATEDTHANKS➡️ Reply Leroi Dresser
Need the spec. information on the Model 660A compressor➡️ Reply Leroi Dresser
DO YOU HAVE THE SPECS ON A 660A. THX➡️ Reply Leroi Dresser
My company is located in Hamburg (German ). I would be highly appreciated to receive your kind offer for the stuff as below: Lucas LedexOptical EncoderModel : K4 DO – 200 – 5DH – 6AEnclosure : TRIM STEPSerial : 96391561Lucas Ledex IncCode Ident 81840For Grinding Machine: FORTUNALooking forward for your kindly reply soon.Thank you.Kindly regards,➡️ Reply Lucas Ledex
Good Morning!Datametric optical encoder code ident 81840, model S-9605.Thank you. Regards,➡️ Reply Lucas Ledex
We have one of these compressors at the Fort Smith Trolley museum. I need info on the compressor and am also looking for a fuel pump.➡️ Reply Leroi Dresser
Does anyone have a wiring diagram for a 3hp, 230 volt, 1750 rpm, M431 motor?➡️ Reply Leland Faraday
have a model 75 RGI and have the 4 cyl fordwater in the oil now and it smokes been tryin to get it put back to working order for just blowing out sprinkling systems seems to be a money pit no one knows or has heard anything about this model please help.➡️ Reply Leroi Dresser
Good Afternoon,We currently have a Dresser Series 880A compressor at our facility and was hoping to find out the correct oil type and quantity as it is in need of an oil change (unfortunately the manuals have long since disappeared). Any information you can pass along will be greatly appreciated. Thank you in advance for your time.Doug KingUtility DepartmentPage, Arizona(909) 650-1091kingrobert46@yahoo.com➡️ Reply Leroi Dresser
I have had this lathe for some time and have retired, I have free time and would like my lathe tobe able to reverse. I found the tag but no wiring diagram. I am trying to get this wired but I need a little help. I have a square D drum switchand think i have that figured out but Im not sure which wires to hook up I think it is a 110/220 motor The wires are Red, Yellow, Blue, Black, White and Green.➡️ Reply Leland Faraday
1. Red wire from capacitor. 2. Blue from motor to sw. 3. White and Green were hooked together at motor. 4. Yellow and Black were connected together at motor To reverse you changed the Red and Black The motor is wired as 220V 1 Phase. I had no wiring for the motor but I did have the Plate The switch is a square D class 2601 type Ag-1. the motor is a 1.5 hp 1 ph cont dutym 204 frame 60 hz 1725 rpm 230 v 9.6 amp code K amb 40 I thimk this is the model # 51 J17 7111 1 76D M 326➡️ Reply Leland Faraday
Thanks anyhow guys I figured it out, Just sat down with my dog (he wasnt much help but company) got the motor reversing and running foward without any mishaps.Didnt need any repair just info. they didnt seem to want to share any info. Im sure the motor came with some instructions for an electrician.➡️ Reply Leland Faraday
What is the control voltage for this compressor➡️ Reply Leroi Dresser
I have a customer looking for a LELAND FARADAY motor. These are the only specs that I have on it.5HP1800RPM1 PHASE230 VOLTF213T FRAMEEXPLOSION PROOFThank you, Stan.➡️ Reply Leland Faraday
Looking for the instillation and service manual if anybody can help me out! Thanks much.➡️ Reply Leroi Dresser
We are looking for the manual for this unit. I have been looking for over a year with no luck. Does anyone know where I can find a copy? The unit will turn on but does not show the voltage on the meter.➡️ Reply Ldj Electronics
You need to contact Walker scientific for info on this we are using a 450-20c with booster bank and they have parts for it as well as a in house service good luck been there before hope this helpsRon Cohee 508-852-3674 exy. 515508-612-8148Product Manager Magnetizers Walker Scientific 10 Rockdale St. Worcester MA 01606 Ph: 508-612-8148 Fx: 810-603-9212 Email:rcohee@walkermagnet.com Website:www.walkerscientific.com➡️ Reply Ldj Electronics
Cheri,We have an LDJ 6000C Magnetizer with an old manual with circuit diagrams. We are also having problems with our LDJ in that it will not charge the capacitors, i have tried everything but to not avail.I coudl photocopy the manual for you if you want.➡️ Reply Ldj Electronics
I have a series 6500C Discharge Magnetizer complete with operator manual.I am also looking for another series 6500C unit. Are their any available to you knowledge➡️ Reply Ldj Electronics
Dear Sir,Please give a quotation for 0-600V Magnetizer Demagnetizer Model no:450-20CSerial no:92060011Model no:BoosterSerial no:860200017Thank you sirG.VANNURUASSEMBLY & TESTING ENGGMTAR TECHNOLOGIES PVT LTDPH:9060165219PH:080-25037265➡️ Reply Ldj Electronics
my company,home fabric finishing obtained an air compessor,,s/n 4002x181,model 50ss.i have a 480 flex going to a 50 h.p. motor and another flex going to a smaller motor.i didnt take out the unit so im unfamilar as to hook it back up.could use a manual or advice as to power hook up please➡️ Reply Leroi Dresser
I am experiencing issues with my Lucas Ledax S-10240-1024 373AR1 optical encoder. The unit is not displaying any output signals and appears to be malfunctioning. I have tested the connections and power supply, but the unit still does not function properly. Based on the symptoms, it seems that the encoder may need repair or replacement. The estimated cost for replacing the Lucas Ledax S-10240-1024 373AR1 optical encoder can vary depending on the service provider and the extent of the repair required. However, a rough estimate for a new unit could range from $200 to $500. I would appreciate your assistance in diagnosing and fixing the issue with the encoder➡️ Reply Lucas Ledax
Can anyone help with three items:1. What is the CFM of this compressor?2. Whats a ballpark value for the compressor? Assume working and average condition.3. APproximately what is the age?Thanks➡️ Reply Leroi Dresser
It is possible to tell, this exception :) Louis vuitton bags , Yes it is a fantasy In my opinion you are not right. I am assured. I can prove it. Write to me in PM, we will talk. I advise to you. You were mistaken, it is obvious.➡️ Reply Leroi Dresser
model# 365003stk#XM-015Edate KDRPM 1745Amp 15/7.8-7.5Hertz 60 Single phase I really need a wiring diagram. This motor can run 120V or 230V. A diagram for both would be GREAT!!Thank You!!!!!➡️ Reply Leland Faraday
LELAND-FARA DAY STOCK NO.XM005BHP-5 RPM-1740VOLT-230F.L AMP 24.5➡️ Reply Leland Faraday
i have a 3 hp single phase 6 wire leland electric motor and do not know how to wire it➡️ Reply Leland Faraday
I have a Leland Faraday 3 hp 230 volt single phase motor. It has 6 wires coming out of the motor, Black, Blue, Red, Green, White, Yellow. Code K, 61J5-8500-2, Stock M390, 84D, I wish to wire it to a single phase, 230 Volt, incoming power. Any help with this would be much appreciated. Thank you➡️ Reply Leland Faraday
I have A Model 660A Ser. #4018x6479 20 HP kohler magnum gas engine. I need to fine info. on unit. Unit is old, but never used. Any info. would be appreicated. Thanks, R Graham➡️ Reply Leroi Dresser
Need specs and or manual for Comp Air 660a ser # 4018x8326Can you help?➡️ Reply Leroi Dresser
Dear All,We are planning to buy a brand part LEROI Dresser is able to be helped to his agent,I wait because I really need the information materialDresser LEROI AIR COMPRESSOR SERIES 60 & 66AThanks for the good cooperationregardsSastroCV. Karya MandiriJl. PM Noor Perum Bumi Sempaja Blok AG No.18East Kalimantan - 75119P : +62 7020237F : +62 220447➡️ Reply Leroi Dresser
Hello.We have our client is interested in repairing this item attached in file. Please hear me if you have any successful experiences. If you had, let us know approx estimated price and delivery time based on your former jobs. ITEM: PCB boardP/N: 60560124-1 Rev-CS/N: 052503Qty: 1Best regards,Chaka Stickland➡️ Reply Lumonics
Good afternoon. Im looking for at least two solid state relay cards for LDJ magnetizers, number 11125A.Do you have these items available or can you refurbish existing ones?Please call me at 540-639-4440 x295, or Allen Duncan at the same number, x203.Thank you for your time.➡️ Reply Ldj Electronics
Motor works fine. Equipment in good condition.Stroke adjustment arm disconnected and pops out every time after been screwed again in place. Could be just a bolt issue...➡️ Reply Lab-Line Instruments
Lowrance 2000 Global Map unit not powering on. Need immediate repair assistance.➡️ Reply Lowrance
I have a LeRoi Dressor Model Q600DC air compressor and would like to try and find a service and parts manual. This fall something failed on the unit and believe it to be electrically related because now it prevents the unit from starting. I found a Q600D manual but the person told me its not the same as the Q600DC. I would appreciate any information you can give me.➡️ Reply Leroi Dresser
what kind of motor do i need?➡️ Reply Leroi Dresser
I have Leland Faraday 3/4 HP V2550 model G56 1578 02. The wiring diagram is damaged on the motor plate. I am trying to hock up a reversing switch.. Thank you for any help. Ken➡️ Reply Leland Faraday
hi,i mr ng from malaysia.i have dynagen g26-2001 inverter but the use manual is lost,can you e-mail to me.TH➡️ Reply Leland Faraday
I am a business customer seeking repair service for my Life Fitness A080-92182 controller unit. The issue with the controller is that it is completely unresponsive. When attempting to power on the unit, there is no display or any indication that it is functioning. I have tried troubleshooting by checking the power source and connections, but the controller remains non-operational. Based on my initial assessment and experience with similar repairs, I estimate the replacement cost of the controller to be in the range of $200-$300. I would appreciate assistance in diagnosing and resolving this issue➡️ Reply Life Fitness
i am in need of some info on the labod drive i have here the only numbers I can make out are as follow #408/4075 7541. if you need more than that I will try to see if there are more numbers. I am really in need of a book or something that can tell me where power is suppose to be going to and from the drive to motors. thanks Jeremy➡️ Reply Labod Electronic
Subject LINCOLN G-1504-2 Firing Board IssueHi,I was informed that the LINCOLN G-1504-2 firing board is not working properly. Could you please take a look?Thanks.➡️ Reply LINCOLN
Hello we have the following Leland Faraday Motor in our shop. I need to see if you have a wiring diagram for this motor. Below is all of the data from the plate.2HP, 3450 RPM, 56 Frame, 115/230 Volt, 21.2/10.6 Amps, 1 phase.#6145, 3 P19 8050 1, M2904.7 leads:WhiteRedGreenYellowRed/BlackBlackBrown.Thank you in advance for your helpTerri➡️ Reply Leland Faraday
Hi Terri I have the wiring diagram which you desire. to ease my assistance please let me know how your motor is terminated and if is not than what voltage you prefer.let me know➡️ Reply Leland Faraday
i have a piece of equipment from your company. i was wondering if you could tell me what it is and what it does. its called a SPECIAL FIXTURE. model# DA 13496serial# 990803151402i think your company built this piece for continental tire. thank you for any information you can share with me. sincerely herb➡️ Reply Ldj Electronics
Lenze 490 493e2 not functioning, requires repair. Seeking technician experienced with Lenze industrial units. Thank you.➡️ Reply Lenze
It sounds like the circuit board in your Lunar Corp 7635 unit is behaving unexpectedly. Some common signs of issues with a circuit board include erratic behavior, such as random shutdowns, inconsistent performance, or unusual error messages. Make sure to have a technician check the circuit board to diagnose and resolve the issue.➡️ Reply Lunar Corp
The Linde H2X684L00822 is experiencing issues with the Transmiller Control. Looking for a repair technician to diagnose and resolve the problem➡️ Reply Linde
Hi. I purchased a home with a 1991 Larko MKI40 gate opener installed. It stopped opening today. Is there somewhere I can get manuals for it? Are parts still available?Do you recommend a certain repair company?Thank youLinda C➡️ Reply Larko Electronic
Do you sell power boards for the MK 140 opener or just repair them. If so how long does it take and how much does it cost. Thank You....➡️ Reply Larko Electronic
The Lc CS20101035 circuit board is displaying no signs of power when connected. Need immediate assistance for repair.➡️ Reply Lc
Leudhardt Dial0G4-F controller not powering on despite proper connections. Need expert repair service ASAP for production downtime.➡️ Reply Leudhardt
Is it possible to repair (or replace) a Lotseite PCB, SAT 6654-E, part number 34430-681-01 that was used in a Sartorius brand analytical balance? I can visually see some damage to a couple of resistors.➡️ Reply Lotseite
this is a 1989 vintage SCT (STFI) compression tester. Looks like a memmory issue. The printout says setup erased and the instrument will not go to the next step choose 11program➡️ Reply Lorentzen & Wettre
Sir/Madam,Please quote me and provide me the time frame for repair of LDJ 450-20C Capacitor Discharge Magnetizer.Thank you!Cam Vu➡️ Reply Ldj Electronics
Im experiencing issues with my Larko Electronic 24-02 board. The unit is not powering on at all, and there seems to be no display or response when attempting to use it. Considering the complexity and value of the unit, may I please know the estimated cost for replacement if repairing it is not feasible? Thank you.➡️ Reply Larko Electronic
Leeds & Northrup 6014-3-04-1-7-41-00-103 unit not functioning, in need of repair. Please advise availability for service.➡️ Reply Leeds Northrup
Part# 230HP 1/3 Frame F56Type RKModel F-56-3550-02SN# AAMIVolts 115/230RPM 1725➡️ Reply Leland Faraday
Based on my experience, the issue with the Lumenis SA-1077240 Rev F Changer for M22 Power Supply may be related to a power supply failure. Symptoms to consider include unit not turning on, flickering lights, or unusual noises. I recommend seeking professional repair services for further diagnosis and resolution.➡️ Reply Lumenis
We have an LDJ model 6602-2 in Juarez Mexico in need of repair. Wondering if your company can help us...➡️ Reply Ldj Electronics
I HAVE A 1980S LELAND FARADAY WATER WELL PUMP 1RM2-S/A 4H7127119, SK 2ABN-175. THE PUMP IS LEAKING WHERE THE MOTOR SHAFT GOES INTO THE OTHER UNIT AND IT LOOKS LIKE ITS THE BEARING. MY QUESTION IS, CAN THIS BEARING BE REPLACED AND IF SO WHERE CAN I PURCHASE THE CORRECT BEARING?➡️ Reply Leland Faraday
Subject Urgent Downtime Report for Lunar Corp. 7635Hi team,I want to quickly report that our Lunar Corp. 7635 unit experienced downtime earlier today due to a board issue. The problem occurred at approximately 1030 AM during the production process, resulting in a halt in operations. I will provide more details as soon as possible, but we need to address this quickly before the next shift arrives.Thanks for your attention to this matter.Best,Shift Supervisor➡️ Reply Lunar Corp
Subject Repeated Issues with LLOYD CONTROLS LC-387-2A Controller Dear Repair Shop,I am writing to report a recurring issue with the LLOYD CONTROLS LC-387-2A Controller. Our inventory records indicate that this unit has been returned or reported multiple times. Customers have mentioned issues with the display screen flickering and the temperature readings being inaccurate. The technicians have also reported that the controller fails to respond to input commands at times. Your expertise in diagnosing and resolving these types of issues would be greatly appreciated.Thank you for your attention to this matter. Best regards,Inventory Manager➡️ Reply LLOYD CONTROLS
Leeds & Northrup 063230 e not powering on when plugged in. Need repair ASAP.➡️ Reply Leeds Northrup
Leeson 174964 isnt powering on. Need repair ASAP.➡️ Reply Leeson
The Motor Display on my Life Fitness treadmill board is not lighting up or responding. Need a technician to diagnose and repair as soon as possible.➡️ Reply Life Fitness
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.
Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.