Welcome to MIT

We repair a wide range of MIT Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Free Estimates
• Low Prices

No repair summaries available yet for this manufacturer.

Comments for MIT

📝 Negron said:

Hi there, I am currently assisting an employee with a malfunction on a Mitsubishi MR-J2-100A system. The issue is unclear, and we are in need of repair information to identify the problem and find a replacement part. Can you please provide us with detailed repair instructions or suggest a suitable replacement? We appreciate your swift response. Thank you. Best regards,— Purchase or Repair:

➡️ Reply Mitsubishi

📝 MICHAEL BV. SANCHEZ said:

mitsubishi mc-70— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Sagan said:

The Mitutoyo AT11-N900 529-446 scale detector is malfunctioning, causing delays in our production line. Urgent repairs are needed to resume operations— Purchase or Repair:

➡️ Reply Mitutoyo

📝 hussein atrees said:

I HOPE THATE YOU HELP US TO SOLV THES PROPLEM IN MELSERVO MODEL MR-SA502WHEN POWER ON THE ALARM COD AL32 IS DISPLAY THANK YOU FOR YOUR SUPPORT— Purchase or Repair:

➡️ Reply Mitsubishi

📝 sonnico elsisura said:

their is an error on our mitsubishi melservo-sa-r the error is alarm 52. pls reply us. thanks.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Erhan said:

Hi there! Our Mitutoyo AT11-N900 529-446 scale detector is malfunctioning and your expertise is needed for repair. Can you please provide us with repair information or guidance as soon as possible? Thank you!— Purchase or Repair:

➡️ Reply Mitutoyo

📝 Leopoldo Gonzalez said:

Dear sirs. I have a Brake press Amada HFB 8025, I need a servo amplifier Melservo Mitsubishi MR-SO 403N— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Hitoshi Sugi said:

Dear sir.We are manufacturing the electrical machinery and apparatus in Japan.Our customer is using Mitsubishi Melservo MR-SA 202U.But Alarm code 24 indicated on the display of that one.The servomotor did not move. Please estimate it for repair if it is possible. Products .....Mitsubishi AC servo MR-SA 202U AC200V50Hz 200/220V 60Hz output 14AAn early answer would be appreciated.Best regardsHitoshi SugiCompany..........................SAN SI INC.Adress...............................Yoshimi 1258-8 sakura city chiba prefecture.JAPANTel........................................+81-(0)43-487-2307Fax......................................+81-(0)43-462-2194— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Tim Murphy said:

Reporting a failed drive or board on the Mitsubishi Electric BD625A887G52 KON-128H power supply. Action needed ASAP to avoid downtime. — Purchase or Repair:

➡️ Reply Mitsubishi Electric

📝 JOSEPH ALEXANDER OF REZENND said:

Please provide details on the availability of support or replacement parts for the Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier. We are in need of a replacement or repair option for this older unit. Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 zhangmenglong said:

Looking for repair for Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier - experiencing erratic movements and abnormal noises during operation. Need assistance ASAP to ensure operations remain uninterrupted. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 DITMER said:

We experienced downtime due to an issue with the Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier. Can you please provide some guidance on what might have caused this and when it occurred? Appreciate your — Purchase or Repair:

➡️ Reply Mitsubishi

📝 vahid said:

Do you have a Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier available for sale or repair? Our unit went down, and we need to get production running smoothly again. Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Len King said:

The Mitsubishi MR-SA-33T Melservo-SA servo drive malfunctioned yesterday at 730 PM, leading to unexpected downtime. We need to identify the root cause — Purchase or Repair:

➡️ Reply Mitsubishi

📝 JUAN CAMILO CASTANO said:

The Mitsubishi Electric BD625A887G52 KON-128H power supply unit seems to be malfunctioning. It is exhibiting unusual behavior, but Im not certain what the issue is. — Purchase or Repair:

➡️ Reply Mitsubishi Electric

📝 Helder said:

Im having trouble with the Mitsubishi MDS-A-V2-3510. Something seems to have stopped working with the machine. Im not exactly sure what the issue is, but I wanted to reach out for assistance. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Jaap said:

The Mitsubishi MDS-A-V2-3510 unit is not working and needs maintenance attention. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Nelsen said:

We experienced downtime due to an issue with the Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier. This occurred during the night shift today. Could you please provide insights into what went wrong to help us resolve the problem before the next shift? — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Md. Abdullah Khan said:

Hello, we need repair info for a Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier. It stopped working and we require a replacement. Can you provide repair assistance quickly for this model? Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Darrell lamme said:

the Mitsubishi Electric BD625A887G52 KON-128H power supply unit went down mid-shift. Needs attention ASAP! — Purchase or Repair:

➡️ Reply Mitsubishi Electric

📝 Arstall said:

Hello, Im interested in purchasing the Mitsubishi MR-SA-33T Melservo-SA Servo Drive. I wanted to inquire about its pricing and availability as I am looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Lon said:

I need assistance with the Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier unit. It caused downtime. What happened? When did it occur? Waiting for a quick answer before the next shift. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Glenn Karl said:

Im interested in purchasing a Mitsubishi MR-SA-33T Melservo-SA Servo Drive. Can you please provide information on pricing and availability? Im looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 STEVE PATTON said:

Hi there! Could you please provide repair information for the Mitsubishi Electric BD625A887G52 KON-128H power supply unit? Our team urgently needs this information for a replacement. Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi Electric

📝 ALEXIS PARRA said:

I have a Mitsubishi Electric BD625A887G52 KON-128H power supply unit that needs repair. It is currently not functioning and I need someone skilled in industrial unit repairs to address the issue — Purchase or Repair:

➡️ Reply Mitsubishi Electric

📝 DAN said:

: Our industrial unit, a large-scale packaging facility, has been experiencing a consistent issue with the conveyor system. The belt constantly breaks down, causing significant delays in product packaging and resulting in lost revenue. This leads to increased labor costs as were forced to manually sort packages. The current estimated repair cost is high, likely exceeding $50,000, given the complexity of the machinery involved. Given this ongoing problem, Im concerned about a long-term solution to prevent these frequent breakdowns and maintain our production capacity.:— Purchase or Repair:

➡️ Reply Mitsubishi Okk Hm40

📝 aji said:

Machine is not powering up. — Purchase or Repair:

➡️ Reply Mitsubishi Electric

📝 Aguiar said:

The Mitsubishi MDS-A-V2-3510 MDS-A-V2-3510 servo drive/spindle amplifier seems to have stopped working properly. Its causing issues with the machines functionality, but Im unsure of the exact problem. Hopefully, we can get it resolved soon. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 hieu said:

Please advise if the Mitsubishi MR-SA-33T Melservo-SA servo drive is still supported or if replacement parts are available. Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 David Wardle said:

Hello, Im interested in purchasing a Mitsubishi MR-SA-33T Melservo-SA Servo Drive. Could you provide information on pricing and availability? I am looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Strayer said:

Mitsubishi MDS-A-V2-3510 issue Servo Drive/Spindle amplifier malfunction impacting production line. Urgent action needed for repair service assistance. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Dale said:

Hey, the Mitsubishi MR-SA-33T Melservo-SA drive unit is down. Needs attention ASAP. Hope you can check it out in the morning. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 kelly wiebe said:

Hello, Im interested in sourcing a Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier. Could you please provide information on pricing and availability? Im looking to acquire one — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Jorge Coelho said:

have you a schematic diagram of this unit?have you some information to help us to fix this problem?Thank you— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Ika said:

Hello, we have a Mitsubishi MR-SA-33T Melservo-SA Servo Drive that recently stopped working. We are looking for repair information or a replacement. Would you be able to assist us with this issue? Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 KOSTAS said:

Could you please provide detailed information on troubleshooting and repairing a Mitsubishi MR-SA-33T Melservo-SA Servo Drive? My client is experiencing some issues with it. Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 maintenance dept. said:

The Mitsubishi MR-SA-33T Melservo-SA unit is not working. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Basudev said:

Im experiencing difficulty with the Mitsubishi Electric BD625A887G52 KON-128H power supply. It seems to have stopped working and Im unsure why. Could you please assist me with this issue? — Purchase or Repair:

➡️ Reply Mitsubishi Electric

📝 Mukesh Rawat said:

The power supply unit of the Mitsubishi Electric BD625A887G52 KON-128H is failing, disrupting the production line. Urgent repair is needed to resume operations swiftly. — Purchase or Repair:

➡️ Reply Mitsubishi Electric

📝 crispin said:

Mitsubishi MR-SA-33T Melservo-SA is malfunctioning. The servo drive is causing a halt in production. Need immediate repair to resume operations. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Boros said:

The Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier unit is not working. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Keyes said:

The Mitsubishi Electric BD625A887G52 KON-128H power supply unit is not working according to the maintenance team. Please investigate further. — Purchase or Repair:

➡️ Reply Mitsubishi Electric

📝 Bella said:

The Mitsubishi Electric power supply unit BD625A887G52 KON-128H is exhibiting abnormal behavior. It is not functioning as expected. — Purchase or Repair:

➡️ Reply Mitsubishi Electric

📝 Steven Baeza said:

Can you confirm if the Mitsubishi Electric BD625A887G52 KON-128H power supply unit is still supported, and if replacement parts are available? Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi Electric

📝 SLANINA said:

The Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier unit is down. Needs immediate attention. Please follow up during the day. - Night shift maintenance crew. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 HUANG said:

We have a Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier that stopped working. Could you please provide repair information or suggest where to find a replacement? Thank you for your quick assistance. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 ellis said:

Hello, I am reaching out on behalf of my client regarding an issue with a Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier. Could you please provide information on repair options and estimate for this component? Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 The said:

Hello, my client is experiencing issues with a Mitsubishi MR-SA-33T Melservo-SA Servo Drive. Can you please provide information on troubleshooting and potential repair options for this model? Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 Maroulas said:

Hello, I need urgent repair information for a malfunctioning Mitsubishi MR-SA-33T Melservo-SA servo drive. Please provide details as soon as possible. Thank you. — Purchase or Repair:

➡️ Reply Mitsubishi

📝 GRAPHIQUE said:

The Mitsubishi Electric BD625A887G52 KON-128H power supply unit is not functioning properly. Please investigate and address the issue. — Purchase or Repair:

➡️ Reply Mitsubishi Electric

📝 Tim Van Bruggen said:

I have a Mitsubishi lathe model M-TC8A serial TC8A-005. I believe one of the soft keys on the controll is sticking. I have removed both the small board and large board and cannot find anything wrong with them. I am pretty sure that one is sticking because I can here the beep and all my lights flash on and off on the controll. Is there a way to test these boards? Operator Board unit MH402A-1 serial 8911007. I am not sure whick numbers on the boards are part numbers.Thanks,Tim Van Bruggen, ownerCAM Specialties, LLC— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Sunil Shivatare said:

Dear Sir .We have a cnc sliding head machine on which the mitsubishi - AC Servo MELSERVO-SA is fitted for turret application .Macvhine has been recently imported .While installation we r facing problem on the above drive .Intially alarm AL32 over current alarm was coming ,so we tried to check the module etc so removed the card .But fitting it back we are getting this AL55.Can you help us in this regardsSunil— Purchase or Repair:

➡️ Reply Mitsubishi

📝 gilliland said:

Hi there, Im interested in purchasing a Mitsubishi MDS-A-BT-6 unit. I wanted to inquire about pricing and availability as Im looking to source one quickly. Thank you!— Purchase or Repair:

➡️ Reply Mitsubishi

📝 FAWZY said:

Urgent Downtime Report for Mitsubishi MDS-CH-CV-260Hi Team,I am writing to report an unexpected downtime caused by the Mitsubishi MDS-CH-CV-260 unit. Unfortunately, the specific issue is unknown at this time as we are still investigating the root cause.Downtime occurred today at , impacting our production schedule. We are currently working on diagnosing the problem to ensure a swift resolution and minimal disruption to operations.Please expedite the troubleshooting process and provide any relevant updates before the next shift arrives. Your— Purchase or Repair:

➡️ Reply Mitsubishi

📝 St said:

The Mitsubishi FR-A024-2.2KP is not functioning properly. Please have it checked by maintenance.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Mike Stalzer said:

Based on my previous experience, the MITSUBISHI PD21B CNC module might be experiencing intermittent power loss resulting in frequent system freezing during operation. This could indicate a potential issue with the power supply or internal connections. Further inspection by a qualified technician is recommended to identify and address the root cause of the problem.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Lluis j Jaimes Delgado said:

The Mitsubishi FR-F740-S185K-CHT inverter drive just failed, need immediate attention. No operations until fixed.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 blackjack54 said:

Machine displaying error code E102.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 MAX SOLOMON said:

Could you please confirm if the Mitutoyo KS-32 Control Unit is still supported and if replacement parts are available? Thank you.— Purchase or Repair:

➡️ Reply Mitutoyo

📝 Geraldzew said:

The Mitsubishi HF-KP23B drive or board has failed, needs immediate attention. Operating at less than optimal capacity, affecting production.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 M.Kaviani nezhad said:

Hello, Can you please provide more information regarding troubleshooting and potential repair options for a Mitsubishi A1SJ71AP21 Data Link Module? Thank you.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Ted Acker said:

The Mitsubishi HF-SP352 3.5kW Servo Drive experienced a malfunction, causing downtime during the last shift. It is crucial to resolve this issue— Purchase or Repair:

➡️ Reply Mitsubishi

📝 SADI said:

Our Mitsubishi FR-E720S-11 SC-EC industrial inverter unit is showing errors and not functioning properly. We need urgent repair service to get it up and running again. Please provide availability for a technician to come to our facility. Thank you.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Jansen Danganan said:

Our Mitsubishi MDS-B-V2-1005 servo drive unit is still down. We need assistance with this matter urgently. Please respond— Purchase or Repair:

➡️ Reply Mitsubishi

📝 wesley eddlemo said:

The Mitsubishi FR-A540-22K A500 22KW Inverter is not working.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 BATSCH said:

Can the Mitsubishi MR-J2S-200B-QR141U633 Servo Drive be repaired or replaced? Trying to check this off my to-do list. Thank you.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Nino Yanchapaxi said:

The unit connected with the Mitsubishi Q170CDCBL3M cable for the A30CD-PCF SSCNET interface board is behaving unusually.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 DeLurgio said:

The Mitsubishi Q64AD-GH A/D input module malfunctioned, causing downtime. This occurred during the night shift on July 12th. Please advise ASAP.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Mr. Surya Agussatria said:

Mitsubishi FR-E540-5.5K-CHT inverter displaying Overcurrent Fault error code.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 samir patel said:

The Mitsubishi ACL022-S input reactor inverter for the 2.2K single-phase inverter 200V caused downtime on . Seeking clarification before the next shift.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Mike m said:

Hello! I hope youre doing well. Im working on getting your Mitsubishi Electric Corporation MDS-C1-V2-1010 servo drive repaired or replaced. Before proceeding, I just wanted to confirm if it can be repaired or if a new one needs to be purchased. Your— Purchase or Repair:

➡️ Reply Mitsubishi Electric Corporation

📝 eugene a riotte said:

Mitsubishi MC116 circuit board issue, unit not powering on. Need repair service ASAP.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Langhirt said:

Could you provide further details regarding the malfunction of the Mitsubishi fr-e520-7-5k-na unit?— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Ben Cooper said:

The Mitsubishi Okk HM-40 is not functioning properly.— Purchase or Repair:

➡️ Reply Mitsubishi Okk Hm-40

📝 Iwan Sutio said:

Hi there, I understand youre having an issue with the Mitsubishi FR-S540E-0.75K-EC unit. From what I gather, its a 0.75kW three-phase micro inverter compatible with the FR-DU04. The problem seems to be that its not working as expected. Let me know if you need further assistance.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Markiewicz said:

The Mitutoyo GML-3705WEC counter unit is not working and needs maintenance.— Purchase or Repair:

➡️ Reply Mitutoyo

📝 Ben Tudor said:

Mitsubishi Inverter IssueMessageHi there, I was informed that the Mitsubishi FR-E520S-1.5K-EC 1.5kW inverter is not working properly. Kindly assist with troubleshooting or repairs. Thank you.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 mittal said:

The Mitsubishi FR-SF-4-26KP-T AC Spindle Controller is not functioning normally. It is exhibiting unusual behavior and not working as expected. Please look into this issue to ensure the unit is operating correctly.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Pai said:

Do you have a Mitsubishi MDS-C1-SPH-55 in stock for sale or repair? Our production is waiting on this crucial component.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 vlasta said:

Odd Behavior of a Machinery Component in the WarehouseI wanted to bring to your attention an issue with a machinery component in the warehouse. The device is displaying erratic behavior, deviating from its usual operation. It seems to be struggling, making unusual noises, and showing signs of instability. As of now, its uncertain what specific function this component serves, but its abnormal performance could potentially impact the overall efficiency of our operations. Your— Purchase or Repair:

➡️ Reply Mitutoyo

📝 lyndon hammill said:

Mitsubishi Q68DAI D/A Converter Module is malfunctioning, impacting production line output. Urgent repair needed to resume operations— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Nebojsa said:

Were experiencing a critical issue with the Mitsubishi MDS-C1-CV-185 POWER SUPPLY that is affecting the production line. Immediate attention and repair are needed to reduce downtime and resume operations swiftly.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Bhogal said:

The Mitsubishi HF-SP102B Servo Drive unit malfunctioned today, causing unexpected downtime. The issue occurred during the morning shift. Could you provide guidance on troubleshooting and resolving this problem before the next shift begins?— Purchase or Repair:

➡️ Reply Mitsubishi

📝 ALAN BUTTIGIEG said:

One of the Mitsubishi QM30DY-H transistor modules failed - need a replacement ASAP!— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Asheesh said:

One of the boards on the Mitsubishi FX3U-7DM display module has failed, causing a disruption in the system. Need to troubleshoot and replace— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Jeff Osborn said:

The Mitsubishi FR-D720-2.2K inverter unit is not functioning properly. Please inspect and troubleshoot the issue at your earliest convenience.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Bonnie Pierson said:

The Mitsubishi MR-J2-200B 2KW Servo Drive is not working and needs attention from maintenance.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Phil Hibdon said:

The Mitsubishi 501W000 drive unit is malfunctioning, causing a complete halt in production. Urgent repairs are needed to ensure minimal downtime and resume operations swiftly.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Mark Ivess said:

Looking for someone to repair my Mitsubishi FR-Z320-11K-AL inverter. Its not responding and needs immediate attention. Thank you.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 maples said:

Can the Mitsubishi Electric Corporation MDS-C1-V2-0303 Servo Drive Unit be repaired or purchased? Im trying to get this fixed as soon as possible. Thank you for your help!— Purchase or Repair:

➡️ Reply Mitsubishi Electric Corporation

📝 Charles Aron said:

Hello, we have a Mitsubishi Electric Corporation MR-E-40AG-KH003 servo drive that needs repair or replacement. Can you please provide information on how to proceed? Thank you.— Purchase or Repair:

➡️ Reply Mitsubishi Electric Corporation

📝 jeerkajh said:

Hi, Im looking for repair info on a Mitsubishi dl-scz-22-k-d. Urgent replacement needed, but cant find one. Can you assist with repair details ASAP? Thank you.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 SHAIKH said:

the Mitsubishi MDS-A-SP-150 spindle drive unit went down mid-shift last night. Needs attention ASAP. Cheers.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 abeer allen said:

We experienced downtime with the Mity VEO-08EF servo drive unit earlier today around 10 AM. Need a quick update before the next shift.— Purchase or Repair:

➡️ Reply Mity

📝 Morne Maree said:

The Mitsubishi BY171E475G51 control board failed on Machine #3. Need replacement ASAP to prevent further downtime.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Kevin Hughes said:

The Mity VEO-04 Servo Drive is currently showing error code E102, causing the equipment to stop functioning. Please advise on necessary steps to resolve this issue— Purchase or Repair:

➡️ Reply Mity

📝 THOMAS WHITE said:

Equipment Mity VE0491AIssue Equipment downSymptom Error code E302 displayedAction needed Urgent repair required to resolve E302 error and restore functionality.— Purchase or Repair:

➡️ Reply Mity

📝 Morandi said:

The Mitsubishi FR-A240E-11K-05 Inverter is malfunctioning, causing a slowdown in production. Immediate repair and attention are required to restore the line to full operation.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Ruby said:

The Mitsubishi SF-CA experienced downtime due to issues with the circuit board. The incident occurred during our shift, and I need a quick response before the next one begins. Thank you.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Charles Boursier said:

Can the Mitsubishi AUM-1391A monitor be repaired or replaced? Trying to check this off my to-do list.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 sidney karsney said:

Looking for a technician to repair my Mitsubishi FR-SF-2-22K-R power supply unit. Its not producing any power, need it fixed urgently.— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Ramanamapamonjy Rivosoa said:

The Mitsubishi FX3U-64DP-M unit stopped communicating with the PROFIBUS-DP interface master. Please investigate and resolve as soon as possible. Thank you!— Purchase or Repair:

➡️ Reply Mitsubishi

📝 Luciano da silva gradim said:

The Mitsubishi inverter FR-U120-N1-5K-UF is displaying error code E22. Machine is not responding to commands and shows OC on the display. Need urgent assistance to troubleshoot and fix the issue to resume production.— Purchase or Repair:

➡️ Reply Mitsubishi