Welcome to N

unofficial service & repair forum

We repair a wide range of N Equipment.

Ask questions, or call 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Fair Estimates
• Low Prices

🛠️ Common AI Repair Summaries 🏭

Comments for N

📝 Alena said:

Experiencing erratic compass readings on my Navico HS 8000 unit. Need assistance diagnosing and resolving the issue

➡️ Reply Navico

📝 Richard McGrath said:

I need pricing for the following:50 each, Norblo Replacement ThimblesFor: Unit Serial #967-13Size: 324-A-1650P/N: L-1670, or L-1870 (End user could not distinguish correct P/N)IAC (Industrial Accessories Company) is an OEM. Please provide us list price, and what our discount schedule is for buy/resale items.Thank You,Richard McGrathProduct Manager

➡️ Reply Norblo

📝 karim said:

NSK 4083141 showing no power or response when turned on. Need immediate repair service to diagnose and fix issue.

➡️ Reply Nsk

📝 Tom Porter said:

I have a Nuova Fima 0-200 PSI stainless steel 4 gauge, Part#MGS18/3A-414, is liquid filled, and about an inch of the needle indicator broke off. Can I get a new needle and replace it myself? Please advise. Thanks, Tom

➡️ Reply Nuova Fima

📝 William Garges said:

I am looking to obtain information about the cost of repair and testing of a Nuova Fima gauge Type 03D. We have several and are in the need of replacements and or repair of the units that we have. Thank you, William GargesDocs E.M.S. (Emergency Maintenance Services)

➡️ Reply Nuova Fima

📝 John Milburn said:

Hello, are you able to supply a pair of neurodyne-dempsey Kelvin Test leads? Availability and price? Part number 9501-0032.Kind Regards, John MilburnDunedinNew Zealand

➡️ Reply Neurodyne-Dempsey

📝 Tom said:

Can you repair a ESLZ10CF1-01 drive and what is the turn around time? We have been sending these to another repair facility but we get about 20% of them back saying unable to repair. Can you help us ?ThanksTom

➡️ Reply Nsk

📝 Ray Buckman said:

The NEWALL A501000 is malfunctioning and needs repair. Looking for a skilled technician to address the issue

➡️ Reply Newall

📝 Mark Proctor said:

NSK ES3040K23-03 Servo DriveHi, We have an NSK ES3040K23-03 servo drive that requires repair.Do you have a fixed price repair on this unit?Please advise as soon as possible.ThanksMark Proctor

➡️ Reply Nsk

📝 MARTIN Michel said:

Hello ,we need repair some parts NSK servodrive or servo motor .have you an office or desk manager in france ?best regards Mr MARTIN Michel

➡️ Reply Nsk

📝 Brian Tam said:

Hi :we need repair some parts NSK servodrive or servo motor Do you have NSK E043SAPA1-002 for sale..

➡️ Reply Nsk

📝 marjan cresnar said:

we have a problem whit NSK servo drive Type ESA-Y2020T23-11Nr. Z-85192 -700Fault on electronic plate NSK Eo43SACB1-001Pleace give as offer for repaire or a new one.Best RegardsMarjan

➡️ Reply Nsk

📝 RAFAEL LOYA said:

I HAVE A PROBLEM WHIT A SERVO DRIVE AMP ESA_Y3040T25-21, I NEED A CATALOG OF ITEM PLEASE THANKS ALL

➡️ Reply Nsk

📝 Animesh said:

I have got a problem that the servo motor is getting fault.How could I repair when I get P1,P2 such kind of warning.

➡️ Reply Nsk

📝 Andy said:

I cant get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. Theres no C2 warning on the Display. Any ideas what could be the problem of the drive? Thanks for any Ideas. Andy

➡️ Reply Nsk

📝 Marhaeni Tambrin said:

Dear Sir / MadamWe need repair or buy servo drive M-ESA-Y2020 G23have you an office or desk manager in Indonesia or Singapore ?We will appreciate for your immediately reply.Best Regards,MarhaeniPurchasing of PT. Akeda Multi MediaJl. KH. Moh. Mansyur No. 11 Blok B 8-12Jakarta 10140 - INDONESIA.Telp. 6221 - 63862651 / 52Fax. 6221 - 63862653skype : marhaeni19

➡️ Reply Nsk

📝 Francesco Baldassa said:

Hello ,we need repair some parts NSK servodrive have you an office or desk manager in italy ?best regards Mr Francesco Baldassa

➡️ Reply Nsk

📝 Joe Beck said:

We have a 5 compartment dust collector at the north crusher of ASARCO Mission mine south of Tucson with a Norblo Model No. T1277 F4 program control that currently works in the manual mode.When put in automatic mode however, the unit has stopped cycling to the individual compartments. The on/off timers seem to work but always on the same compartment. Also, in manual mode it delivers 117 volts to the motor starters, which pulls the starters in solidly. In auto, it only delivers 111 volts and the starters chatter loudly.Is there something we can try with the existing unit, or would it be possible to order a specific part of the system that we can replace to repair these issues?

➡️ Reply Norblo

📝 Federico Fuentes said:

We have a dust collector Norblo and we want some body to contact us to get information to buy spare parts of our filter

➡️ Reply Norblo

📝 Mrs Mohan said:

The above mentioned drive needs repair.

➡️ Reply Nsk

📝 Richard Amante said:

Lather /Torno CNC TONGIL HEAVY INDUSTRIES CO.LTDChangwon KoreaTYPE TNL-35Serial No 7C17200898Model Sentrol-L We have acquired in our plant a Lathe CNC Tongil Modelo TNL35.It wanted to know if you can provide to us Manuals Operators, Manuals Panel and Manuals Sentrol Control.In spanish or english language.Our kind regards, Richard Amante

➡️ Reply NC-TEK CNC SENTROL

📝 Giancarlo Pastori said:

We have acquired in our plant a waterjet CNC Boram ITT Model: SentrolItem N°: E000-03523SerialN°: 02102312It wanted to know if you can provide to us Manuals Operators, Manuals Panel and Manuals Sentrol Control.In english language.

➡️ Reply NC-TEK CNC SENTROL

📝 MichaelNeank said:

friends at work have been hoping about. This kind of information here on the web site is one of a kind and helpful and is going to assist My wife and her kids in our studies twice a week. It is obvious this forum acquired a significant amount of details regarding the stuff I am interested in and other pages and information also show it. Im usually not on the net during the night although when I am bored im more often than not searching for this kind of knowledge and things closely having to do with it. When anyone gets a chance, check out at my site: Tonopah, AZ Ranches for Sale

➡️ Reply NC-TEK CNC SENTROL

📝 Navjot Singh said:

plz email the detail Manual and Software for NSK Servo ESA B045Af3-21 . with Regard Navjot Singh

➡️ Reply Nsk

📝 c.h yap said:

how to use the nikki denso servo motor driver have manual noti have one old machine use nikki denso servo motor so can help for methank you

➡️ Reply Nikki Denso

📝 Andy said:

I from Russia.We do not have service NSK.I have read through the message I wish to ask. Service a manual is necessary to me.At me has deteriorated ESK-Y4080FT1-20 the driver.The ballast resistor 200 Ohms and the field transistor 2SK2662 burns down.I want the scheme or consultation.

➡️ Reply Nsk

📝 Rick Gustafson said:

Nuarc Model # SST1418TR Serial # 94B68-38Looking for the solenoid to operate the camera shutter. Wondering if you sell this part?

➡️ Reply Nuarc

📝 Md. Shahnewaz said:

Subject Urgent Request for Repair/Replacement Info on NOVATEC MDM-25A DryerHi there,Our NOVATEC MDM-25A dryer has unexpectedly stopped working, and were in need of a replacement part to fix it

➡️ Reply Novatec

📝 Kohlbrenner Chris said:

Hello, we have a Problem with an NSK ESA Y2020 TF6-20, No: 2-05407-700. It shows F 4 on the Display and we dont know, what that means. Please send us an Answer as soon as possible.Please send us also a list of every possible Alarm, which could be shown on the Display.The Adress is above, please add Abt. Kunststofftechnik, Anglikerstrasse 99 between Name and Location.Kind RegardsChris Kohlbrenner

➡️ Reply Nsk

📝 Todd Havinga said:

Is there a reason why we have to constantly recalibrate the Home position on these drives, We are usins the ESA-Y3040T25-21

➡️ Reply Nsk

📝 thiagu said:

hi, im looking for nsk controller which the model no is EM0608A15-05. I aloso got 1 faulty controller need to be repair. pls send me the quotation togather with trasportation.

➡️ Reply Nsk

📝 KUMARADEVAN SANTANADEWAN said:

I have one unit of NSK motor controller model NSK AMD EXC3 for repair.I would like to have advice, the frequent faulty of this module during production. Most of the fauly is burn IC of M1050 at Y and X- axis motor. Pls advice!

➡️ Reply Nsk

📝 Gilberto Saraiva said:

Good Morning:I need the manual of servo drive EM0608A05-05 NSK. Could you help-me please?.Thanks a lot

➡️ Reply Nsk

📝 mansuk hong said:

Id like to get a manual for nsk that is ESB014CFI-01A.IVE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY IM NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

➡️ Reply Nsk

📝 ANIL KUMAR P said:

Dear sir Please send english vertion manual of K20093-01-01 . PDF manual belongs to NSK servo drive model no. = ‚d‚w‚d‚‚P‚O‚O‚P‚O‚‚O‚O‚O‚RRegardsAnil

➡️ Reply Nsk

📝 Scott Boynton said:

Hello, I have a NSK ESA Y2020 drive that appears a blown optoisolator on the quadrature encoder output. The A, B, B, Z and Z channels work normaly, with a zero to five volt throw, but the A channel only has about a half volt thow. Of course this is preventing it from working properly. Can you offer an estimate? I am waiting for the drive back from the intigrator, but will be able to send the unit when it arives.Thank you in advance.Scott

➡️ Reply Nsk

📝 Moises Tovar said:

I need a NSK driver part no. EE0608A05-25 SERIE. 065221

➡️ Reply Nsk

📝 Moises Tovar said:

I need a Nsk driverEE0608A05-24.2 or substituteThank you

➡️ Reply Nsk

📝 Cheol Min Part said:

Dear Sir.I wonder whether you can fix this driver or not.(M-ELC-JG014VF1)If you can, let me know estimates and delivery time.If you need picture, Ill send you some pictures.Thanks.

➡️ Reply Nsk

📝 chi wai kwok said:

Hello!My problem for the robot hand home postion,i change esa nsk servodrivebut this esa nsk servodrive use left side now i want use to right side i donthow to setting esa nsk servodrive please give me informtion.THANHS SO MUCH

➡️ Reply Netstal

📝 R. Saravanan said:

I am Saravnana from M/s Lucas TVS Ltd. Channai. We are designed & Manufacturing Auto electrical equipment.We are using M/s TOHOKU SEIKI make stator winding machine for our product. We found NSK make servomotor model ESA-Y5240 T23-21 is used in the winding machine some application. We need to change index position of the above sevomotor to suit our product. We do not have any manual or catulouge for this servo motor.Please give your input to change servo motor indexing position.Regards,R. Saravanan.

➡️ Reply Netstal

📝 HEDI ABSI said:

Hello,We are specialized in the injection of CD we need to repair or buy a robot for injection machine NSK NETSTAL DISCJET DJ 600 110 CDR .Thank you for responding urgentlyRegardsHedi

➡️ Reply Netstal

📝 luciano j. galvan said:

Hi! Im a member of the Couples For Christ Community here in Surigao City and at present the music ministry coordinator, pls send us your price lists for powered outdoor speakers that can match our 300watts mixer.

➡️ Reply Network Supply

📝 DJ Novelty Inc. said:

no picture screen stays black aslo makes a click noise

➡️ Reply Neotech

📝 Volker Schmidt said:

We hava some drivers with the PN ESA-BO14CFD-21 or ESA-BO14CF3-11I can communicate over hyper terminal but not all command work, TS, TC, IO0/RB but some commands do not work like TT, MN.Do you have any idear?Thanks for help Volker

➡️ Reply Nsk

📝 Dave Allen said:

We have a problem with ALL of our Tacumi toolchanger magazine carousels, when the magazine 1st homes the position is ALWAYS different.This is the SAME problem on EVERY machine.They all use the same NSK drive and motor.Drive type: ESA-Y3040T25-21 Motor type: YS3040FN501, No. 3Y31019Can you offer ANY solutions.Dave Allendave@cybertech-controls.com (cel)519-796-8820

➡️ Reply Nsk

📝 joe garar said:

Certainly. Please provide a brief description of the issue with your Norgren VP5006BJ111H00 valve. Include details about what the unit is or isnt doing accurately. Additionally, if the estimated replacement cost is substantial, you might want to mention that for potential repair considerations. Thank you.

➡️ Reply Norgren

📝 suresh said:

we bought RF TX and RX encoder decoder kits from nsk electronics.but when we use our modules there is no output.if we come to u whether u test it

➡️ Reply Nsk

📝 Edward Rivera said:

I dont have a manual for it and i have rapid acess film for it. I also dont know where to set the lens for line and haft tone. Pleas help me out. Thank You.

➡️ Reply Nuarc

📝 dennis said:

I am using a nuarc vv1418 camera with rapid access film, I always get a weak or dark image out in the corners. Longer times weaken the center of the image. wondering if the angle of the lights is wrong?

➡️ Reply Nuarc

📝 XAVIER GALLARDO said:

Hello: looking for a NuArc VV 1418 Itek LensThanks

➡️ Reply Nuarc

📝 Anthony Mitchell said:

When I turn the camera on it comes on for just a second then turns off. It does not trip the breaker just turns itself off. I do not know where to start. Electricial, swtich or board problem. I teach at a Career Technical School and do not have much money to fix equipment so I need to fix it myself. Thanks for any suggestions.

➡️ Reply Nuarc

📝 Anthony Mitchell said:

I have a NuArc process camera, it is old but does a good job. When the power switch is turned on the camera comes on but after about 10 seconds turns off. I do not know where to start. What is your best guess of the problem and the estmated cost to fix it. I teach printing to high school kids so money is in short supply. Thanks for any help. The camera is a NuArc vv 1418

➡️ Reply Nuarc

📝 Jeffrey said:

lowered the bed to reduce and bed will not come back up any suggestionsThank youJeff

➡️ Reply Nuarc

📝 Liliana Hernandez said:

Im reaching out for repair service for my Navico JB 8000 controller unit. The issue Im experiencing is that the unit fails to power on or respond to any input commands. Ive tried troubleshooting by checking the power source and connections, but the problem persists. Based on my assessment, the estimated replacement cost for a new Navico JB 8000 controller is approximately $200-$300. I would appreciate any assistance in diagnosing and resolving the issue to avoid the cost of purchasing a new unit. Thank you for your

➡️ Reply Navico

📝 Amal Raj said:

Dear sirPlz send pdf ofesa-b045af3-21RegardsS.Amal Raj

➡️ Reply Nsk

📝 Vishnumurthy said:

Please send me the PDF for type ESA-B045AF3-21 number B-2X011-700.And also provide the service center name/ details in Bengaluru, Karnataka, India.RegardsVishnumurthy

➡️ Reply Nsk

📝 John Fleming said:

In 2007 you repaired one of our NUM 720 monitor/power supplies. We are having the same problem again with the unit you repaired. I have a backup unit but it is also not working properly, it has the same problem as the one you repaired the 1st time. Can you give me some idea what turn-around time and cost on this unit may be? I realize its pretty tough without having it in hand but a best-guess would be great.old Inv # 092820070081Selti ElecttronicaNUM 720old serial 10019/001ThanksJohn FlemingMachined Products/Bogart Racing WheelsPhoenix, Az

➡️ Reply Num

📝 Craig Thurs said:

Do you repair boards for NDC Infrared Engineering, Inc. ?Board #707044 and 703199

➡️ Reply Ndc Systems

📝 Peter Hamvai said:

Dear repair center,Im searching for a used(repaired) NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!If you havent from this modul, please let me know around what is the repairing time with delivery if the wrong one is on Hungary now?!kind regardsPeter Hamvai

➡️ Reply Nsk

📝 Anand said:

Dear repair center,We need to repairing NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!Warm regardsAnand

➡️ Reply Nsk

📝 Joseph Conner said:

Im, with the US Coast Guard Auxiliary and Im looking for a small computer of some type that could be programmed to suite our Vessel Safety Checks and the reasons are to cut down or even eliminate the use of the paper forms needed to conduct a Vessel Safety Check on boaters within the United States waters. This computer or component needs to be able to waterproof, small enoughto be handled with one hand, possibly float if dropped in the water and to provide the Vessel Examiner with atleast four functions. The functions would be Save, Send, Print Document and be able to Print Out a Plastic type Label on the current year.There is one other item the cost needs to be within reason.How do I pay for this prototype through a Grant that Im working on.If you can assist me in this project I would welcome your suggestions.Thank you for your time;Sincerely,Joseph A. Conner, USCGAUX 081-03-06 and USCG Retired

➡️ Reply Norand Corporation

📝 Rodolfo Vargas Santamaria said:

I have Motor Drive Type ESA-0810A35-21.1 NO. 0812484This device sent to display the code letter P - 1 and put the power light yellow color.My question is what is this code

➡️ Reply Nsk

📝 Jesus Escobedo said:

We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,Jesus EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuadalajara, Jalisco, Mexico.Phone: 3881-1400 Ext. 2379Electronic Mails: jmescobedo@condumex.com.mxjmescobedo@ccicsa.com.mxOperadora CICSA, SA de CV(SWECOMEX, SA de CV)

➡️ Reply Nsk

📝 Jesus Escobedo said:

We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,Jesus EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuadalajara, Jalisco, Mexico.Phone: 3881-1400 Ext. 2379Electronic Mails: jmescobedo@condumex.com.mxjmescobedo@ccicsa.com.mxOperadora CICSA, SA de CV(SWECOMEX, SA de CV)

➡️ Reply Nsk

📝 Sergio Rodriguez said:

NSK Servo Drive Repair Model: EM1010A15-05 We have a NSK Servo Drive in bad conditions, when we turn on the machine light leds.I appreciate your comments, in case that you can to repair my servo drive.Best Regards Sergio Rodriguez Plant chiefProduction DepartmentAv. Los pinos #7 A Col. Los pinosGuadalajara, Jalisco, Mexico.www.damy.com

➡️ Reply Nsk

📝 yasser said:

good evening .i hope all stuff ok. plz i have proplem, in my netestal machine about robot moving hand .this problem come from servo drive give me error f4 and i read in book its friom emergency switch but i check all emergency ok. i try another drive it work and give letter C but problem difference software with respect to servo motor.tell me what i can do .and thanx alot OUR SERVO DRIVE IS ESA-Y2020tf1-11 and trhe new servo i try is ESA-Y2020TF8-21 PLZ ANSWER MEAS SOON AS POSSIBLE

➡️ Reply Nsk

📝 Olaf Rekman said:

Dear sir,I am looking for a new or rebuilded NSK driver TYPE EMB014AF-2-05Please let me know.Regards - Olaf

➡️ Reply Nsk

📝 Jeff said:

HiI have a NUM MDLU2050N00 servo drive that started faulting out and now doesnt power up can you repair this drive?Thanks Jeff

➡️ Reply Num

📝 TOMAS MARIN said:

I GOT A PROBLEM BUT I DONT KNOW WHERE COULD BE IF IN MOTOR OR IN DRIVE MY DRIVE IS AN NSK ESA Y3040TF120 AND THE MOTOR THE FAULT ON THE DRIVE IS F-1 AND A- 4 AND THE MAIN PROBLEM IS ON THE TOURRET INDEXING SO I CAN NOT SEE ON DYSPLAY THE NUMBER OF THE TOOL

➡️ Reply Nsk

📝 Chester Yong said:

dear sir,I would to check that do you able to repair this NSK driver model: ESA 23?

➡️ Reply Nsk

📝 James Park said:

Hello,We have a upper and lower driver we need to get repaired. The type is ESA-B014CFC-21 and the NO. is B-13004-700. They both are not accurate so we were wondering if we can send them to you guys and have the calibrated. Please give me a call back or shoot me an email and hopefully we can figure something out. Hope to hear from someone soon. Thank you!

➡️ Reply Nsk

📝 Doreen Rogers said:

Hello, I am looking for the following bearing for NSK RW1410FN523 servo motor.The part number is 150DXR007DD / NRXT15025 C8P5 sealed bearing outer race / inner race Is this something you may have available for sale ?

➡️ Reply Nsk

📝 Curtis Indy said:

We are running an NSK ESA-Y2020A25-21 drive. On startup it displays an error code of E0A4. What is this error and is it a repair situation?

➡️ Reply Nsk

📝 Olaf Rekman said:

Dear Sir,I am looking for a programming terminal for NSK driver type EMBO14AF2 Looking forward to hear from You,Best regardsOlaf RekmanStokkanhaugen 1167048 Trondheim – NorwayPhone +47 90963306olafrekman@gmail.com

➡️ Reply Nsk

📝 Kevin Lim said:

My Scanray X-ray systems having the problem to activite X-ray operation, every time Im switched on the X-ray operation and it turn down immediately, and the control panel can not adjust the Ma setting. it is always fixed at 2Ma.

➡️ Reply Nsk

📝 Red Hvizdos said:

The Nasscor Inc. C60 Amerec Steamer is not producing steam when turned on. Need a repair technician to troubleshoot the issue

➡️ Reply Nasscor Inc

📝 Maher Amara said:

If its possible to repqir the SERVO DRIVE NSK type EMOAOBK13-05SPR-T4/Z-NS

➡️ Reply Nsk

📝 j.sivasankaran said:

We have the Cnc machine with Sentrol-2 system, Now the System Mother board is faulty, we found that the Intel Pentium Processor is faulty, I want the same from youThe Processor details areIntel Pentium W/MMX TechFV 80503266SL2Z4/1.9VMALAYL3120456-0549If the above processor is available with you please let me know the same to purchase immediately

➡️ Reply NC-TEK CNC SENTROL

📝 BesterPreisvergleich said:

Hallo, ich habe eine tolle Seite entdeckt,bei der man einfach den billigsten Preis fur allerlei Dinge suchen kann. Hier ist der link Bester Preisvergleich Ach ja, ausserdem findet man dort jede Menge Gutscheine, was naturlich toll ist!.

➡️ Reply Nsk

📝 Konrad Zaj±czkowski said:

Hello,Im interrested in estimated repairing time and price of the potentiometer:Novotechnik XTS-015504The exact potentiometer is probably made for MAN Roland, so i cant buy a new one anywere.If u have a new one for sale, please let me know also.Regardskonrad zaj±czkowski

➡️ Reply Novotechnik

📝 Victor sciarrillo( delta steel) said:

We have a couple machines that use NSK drivesType:EM1010A15-05No. 103554-591The machine manufacturer said they are obsolete and cant sell us one. We willbuy new or rebuilt if you have either.

➡️ Reply Nsk

📝 Alex Cheong said:

Dear Sir,We are trading company located in Malaysia looking for the possibility to repairing several type of OEM NSK DD motor and Driver as below,DD Motor type,1) M-JSB015FA503DD motor Drivers,2) M-ESA-D017-CF13) ESA-JB015CF3-204) M-EDC-PS3015CB5F5-01Kindly advise the possibility, prices, lead time, other terms and condition.Your highly prompt respond much appreciate.Thanks. ( Alex Cheong )

➡️ Reply Nsk

📝 Larry Loukes said:

Can you calibrate the unit above?

➡️ Reply NC-TEK CNC SENTROL

📝 Larry Loukes said:

Can you calibrate the unit above?

➡️ Reply NC-TEK CNC SENTROL

📝 Greg Mayfield/Fremarc Designs said:

Good Afternoon,We just received the repaired hand pad (your invoice 051820120099) and cannot get it to work. I tried calling you but the phone is busy, will you please have a tech call us and ask for Ron Ellison or Hugo Lopez, they are the supervisor and operator respectively. Our phone number is 626-965-0802 and our hours are 6:30am to 3:00pm PDT.Thank you,Greg MayfieldFremarc Designs

➡️ Reply NEE Controls Ltd

📝 Andy said:

We are working on our study thesis and our problem is we cant get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. Theres no C2 warning on the Display. Any ideas what could be the problem of the drive and how we could possible solve this? Thanks for any Ideas. Andy

➡️ Reply Nsk

📝 MARIO BALANDRAN said:

we are look9ing for KSK drive EE1010A98-25

➡️ Reply Nsk

📝 Tafheem said:

NSK ESA-Y3008A25-21 power supply unit is not turning on despite being plugged in. Need immediate repair assistance.

➡️ Reply Nsk

📝 Shaun Condon said:

Navico E01142 control board malfunctioning, showing error codes and not responding to inputs. Need repair ASAP to minimize downtime.

➡️ Reply Navico

📝 Alain David said:

I am a business customer inquiring about repair service for my NSK FMDI 01 MDI Pendant. The unit is not turning on at all, despite multiple attempts to power it up. I have checked the power source and cables, and they seem to be in proper working condition. The estimated replacement cost for a new NSK FMDI 01 MDI Pendant is approximately $500.

➡️ Reply Nsk

📝 Eric Lopez said:

My Nedap 9552456 power supply is not functioning properly. When I try to power it on, there is no response and no indicator lights come on. I suspect there may be an internal fault. If repair costs are high, I would like to know the estimated replacement cost. Thank you for your assistance.

➡️ Reply Nedap

📝 Micha³ Sierotowicz said:

Hello,Im interrested in estimated repairing time and price of the potentiometer:Novotechnik XTS-015503MAN 037V380944F.DAT. 36/95If u have a new one for sale, please let me know also.RegardsMichael Sierotowicz

➡️ Reply Novotechnik

📝 Aaron Bass or Eric Gant said:

We are a small art school with a broken NuArc unit (specs below). It seems to be a loose wire, as the bottom row of buttons (start, cancel E8, etc.) will not start. So, we are looking for a repair person in the area.Unit specs26-IKS-NTNT C00-005120609.5ThanksAaron Bass

➡️ Reply Nuarc

📝 Eric Ronnebaum said:

Dear sales I need a repair on a nsk RW1410FN523 motor. My customer is stating it making loader then normal noises and it harder to rotated by hand. The NSK amplifier is M-EP1410A15-05We would like to have a estimate if possible to go through it. I dont know if this is possible without looking at the unit but if you have done this particular motor before can you provide a worst case quotation. Regards,Eric Ronnebaum

➡️ Reply Nsk

📝 Leo Solomon said:

Gud DayThe NSK ESA-Y2003A23-21 driver that we have is having a big trouble on its communication , it wont make the motor to initialize, it only goes on one side of initialization and does not goes to its original position, but when we try to manually rotate it using handy controller configuration, it smoothly rotates clockwise and vise versa, we have tried using a different motor in order to verify if its the motor that is not good or the driver, and we have concluded that its the driver that is defective, hope you could help me, we badly need it, thanks in advanceLeo

➡️ Reply Nsk

📝 ScottHug said:

Hi

➡️ Reply Nsk

📝 Nadher said:

Subject Urgent Repair Needed - Nilflak-Advanced 56314084 Control Panel IssueHello,Our Nilflak-Advanced 56314084 is currently down due to a control panel malfunction. The screen is displaying error code E-105 and we are unable to operate the equipment. We urgently need assistance to troubleshoot and repair this issue. Please let us know when your technician can come onsite to resolve the problem.Thank you.

➡️ Reply Nilflakadvanced

📝 NormanLew said:

Hello. And Bye.

➡️ Reply Nsk

📝 dao said:

The Nsk esa-j1003af2-11 ESA Servo Drive is malfunctioning, causing a production line downtime. Urgent repair is needed to restore operations

➡️ Reply Nsk

📝 Rune Møller Hauser said:

Nobel Elektronik 1 174 442 not powering on. Seeking repair service for industrial unit ASAP.

➡️ Reply Nobel Elektronik

📝 Jack Rogers said:

Customer: Hi, I have a New Holland unit with the model number 86018524, and I seem to be having an issue with the controller. Its not responding properly or consistently. Sometimes it works fine, but other times it just stops working altogether. Ive tried resetting it, but the problem keeps coming back. Do you have any ideas on what might be causing this issue and how it can be fixed? Thank you.

➡️ Reply New Holland

📝 William Jimenez said:

: My refrigerator has been experiencing issues for several weeks now. It wont cool properly, the temperature settings dont seem to be working consistently, and theres an unusual humming sound coming from it. The unit also seems to be leaking a strange liquid on the floor. I believe this is a serious problem that requires repair, but I am unsure about the cost of fixing it or if replacing the whole unit would be more efficient. Could you please give me an estimated cost for repairing or replacing my refrigerator?:

➡️ Reply Nasscor Inc