Welcome to Nsk

unofficial service & repair forum

We repair a wide range of Nsk Equipment.

Ask questions, or call 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Fair Estimates
• Low Prices

🛠️ Common AI Repair Summaries 🏭

Comments for Nsk

📝 karim said:

NSK 4083141 showing no power or response when turned on. Need immediate repair service to diagnose and fix issue.

➡️ Reply Nsk

📝 Tom said:

Can you repair a ESLZ10CF1-01 drive and what is the turn around time? We have been sending these to another repair facility but we get about 20% of them back saying unable to repair. Can you help us ?ThanksTom

➡️ Reply Nsk

📝 Mark Proctor said:

NSK ES3040K23-03 Servo DriveHi, We have an NSK ES3040K23-03 servo drive that requires repair.Do you have a fixed price repair on this unit?Please advise as soon as possible.ThanksMark Proctor

➡️ Reply Nsk

📝 MARTIN Michel said:

Hello ,we need repair some parts NSK servodrive or servo motor .have you an office or desk manager in france ?best regards Mr MARTIN Michel

➡️ Reply Nsk

📝 Brian Tam said:

Hi :we need repair some parts NSK servodrive or servo motor Do you have NSK E043SAPA1-002 for sale..

➡️ Reply Nsk

📝 marjan cresnar said:

we have a problem whit NSK servo drive Type ESA-Y2020T23-11Nr. Z-85192 -700Fault on electronic plate NSK Eo43SACB1-001Pleace give as offer for repaire or a new one.Best RegardsMarjan

➡️ Reply Nsk

📝 RAFAEL LOYA said:

I HAVE A PROBLEM WHIT A SERVO DRIVE AMP ESA_Y3040T25-21, I NEED A CATALOG OF ITEM PLEASE THANKS ALL

➡️ Reply Nsk

📝 Animesh said:

I have got a problem that the servo motor is getting fault.How could I repair when I get P1,P2 such kind of warning.

➡️ Reply Nsk

📝 Andy said:

I cant get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. Theres no C2 warning on the Display. Any ideas what could be the problem of the drive? Thanks for any Ideas. Andy

➡️ Reply Nsk

📝 Marhaeni Tambrin said:

Dear Sir / MadamWe need repair or buy servo drive M-ESA-Y2020 G23have you an office or desk manager in Indonesia or Singapore ?We will appreciate for your immediately reply.Best Regards,MarhaeniPurchasing of PT. Akeda Multi MediaJl. KH. Moh. Mansyur No. 11 Blok B 8-12Jakarta 10140 - INDONESIA.Telp. 6221 - 63862651 / 52Fax. 6221 - 63862653skype : marhaeni19

➡️ Reply Nsk

📝 Francesco Baldassa said:

Hello ,we need repair some parts NSK servodrive have you an office or desk manager in italy ?best regards Mr Francesco Baldassa

➡️ Reply Nsk

📝 Mrs Mohan said:

The above mentioned drive needs repair.

➡️ Reply Nsk

📝 Navjot Singh said:

plz email the detail Manual and Software for NSK Servo ESA B045Af3-21 . with Regard Navjot Singh

➡️ Reply Nsk

📝 Andy said:

I from Russia.We do not have service NSK.I have read through the message I wish to ask. Service a manual is necessary to me.At me has deteriorated ESK-Y4080FT1-20 the driver.The ballast resistor 200 Ohms and the field transistor 2SK2662 burns down.I want the scheme or consultation.

➡️ Reply Nsk

📝 Kohlbrenner Chris said:

Hello, we have a Problem with an NSK ESA Y2020 TF6-20, No: 2-05407-700. It shows F 4 on the Display and we dont know, what that means. Please send us an Answer as soon as possible.Please send us also a list of every possible Alarm, which could be shown on the Display.The Adress is above, please add Abt. Kunststofftechnik, Anglikerstrasse 99 between Name and Location.Kind RegardsChris Kohlbrenner

➡️ Reply Nsk

📝 Todd Havinga said:

Is there a reason why we have to constantly recalibrate the Home position on these drives, We are usins the ESA-Y3040T25-21

➡️ Reply Nsk

📝 thiagu said:

hi, im looking for nsk controller which the model no is EM0608A15-05. I aloso got 1 faulty controller need to be repair. pls send me the quotation togather with trasportation.

➡️ Reply Nsk

📝 KUMARADEVAN SANTANADEWAN said:

I have one unit of NSK motor controller model NSK AMD EXC3 for repair.I would like to have advice, the frequent faulty of this module during production. Most of the fauly is burn IC of M1050 at Y and X- axis motor. Pls advice!

➡️ Reply Nsk

📝 Gilberto Saraiva said:

Good Morning:I need the manual of servo drive EM0608A05-05 NSK. Could you help-me please?.Thanks a lot

➡️ Reply Nsk

📝 mansuk hong said:

Id like to get a manual for nsk that is ESB014CFI-01A.IVE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY IM NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

➡️ Reply Nsk

📝 ANIL KUMAR P said:

Dear sir Please send english vertion manual of K20093-01-01 . PDF manual belongs to NSK servo drive model no. = ‚d‚w‚d‚‚P‚O‚O‚P‚O‚‚O‚O‚O‚RRegardsAnil

➡️ Reply Nsk

📝 Scott Boynton said:

Hello, I have a NSK ESA Y2020 drive that appears a blown optoisolator on the quadrature encoder output. The A, B, B, Z and Z channels work normaly, with a zero to five volt throw, but the A channel only has about a half volt thow. Of course this is preventing it from working properly. Can you offer an estimate? I am waiting for the drive back from the intigrator, but will be able to send the unit when it arives.Thank you in advance.Scott

➡️ Reply Nsk

📝 Moises Tovar said:

I need a NSK driver part no. EE0608A05-25 SERIE. 065221

➡️ Reply Nsk

📝 Moises Tovar said:

I need a Nsk driverEE0608A05-24.2 or substituteThank you

➡️ Reply Nsk

📝 Cheol Min Part said:

Dear Sir.I wonder whether you can fix this driver or not.(M-ELC-JG014VF1)If you can, let me know estimates and delivery time.If you need picture, Ill send you some pictures.Thanks.

➡️ Reply Nsk

📝 Volker Schmidt said:

We hava some drivers with the PN ESA-BO14CFD-21 or ESA-BO14CF3-11I can communicate over hyper terminal but not all command work, TS, TC, IO0/RB but some commands do not work like TT, MN.Do you have any idear?Thanks for help Volker

➡️ Reply Nsk

📝 Dave Allen said:

We have a problem with ALL of our Tacumi toolchanger magazine carousels, when the magazine 1st homes the position is ALWAYS different.This is the SAME problem on EVERY machine.They all use the same NSK drive and motor.Drive type: ESA-Y3040T25-21 Motor type: YS3040FN501, No. 3Y31019Can you offer ANY solutions.Dave Allendave@cybertech-controls.com (cel)519-796-8820

➡️ Reply Nsk

📝 suresh said:

we bought RF TX and RX encoder decoder kits from nsk electronics.but when we use our modules there is no output.if we come to u whether u test it

➡️ Reply Nsk

📝 Amal Raj said:

Dear sirPlz send pdf ofesa-b045af3-21RegardsS.Amal Raj

➡️ Reply Nsk

📝 Vishnumurthy said:

Please send me the PDF for type ESA-B045AF3-21 number B-2X011-700.And also provide the service center name/ details in Bengaluru, Karnataka, India.RegardsVishnumurthy

➡️ Reply Nsk

📝 Peter Hamvai said:

Dear repair center,Im searching for a used(repaired) NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!If you havent from this modul, please let me know around what is the repairing time with delivery if the wrong one is on Hungary now?!kind regardsPeter Hamvai

➡️ Reply Nsk

📝 Anand said:

Dear repair center,We need to repairing NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!Warm regardsAnand

➡️ Reply Nsk

📝 Rodolfo Vargas Santamaria said:

I have Motor Drive Type ESA-0810A35-21.1 NO. 0812484This device sent to display the code letter P - 1 and put the power light yellow color.My question is what is this code

➡️ Reply Nsk

📝 Jesus Escobedo said:

We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,Jesus EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuadalajara, Jalisco, Mexico.Phone: 3881-1400 Ext. 2379Electronic Mails: jmescobedo@condumex.com.mxjmescobedo@ccicsa.com.mxOperadora CICSA, SA de CV(SWECOMEX, SA de CV)

➡️ Reply Nsk

📝 Jesus Escobedo said:

We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,Jesus EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuadalajara, Jalisco, Mexico.Phone: 3881-1400 Ext. 2379Electronic Mails: jmescobedo@condumex.com.mxjmescobedo@ccicsa.com.mxOperadora CICSA, SA de CV(SWECOMEX, SA de CV)

➡️ Reply Nsk

📝 Sergio Rodriguez said:

NSK Servo Drive Repair Model: EM1010A15-05 We have a NSK Servo Drive in bad conditions, when we turn on the machine light leds.I appreciate your comments, in case that you can to repair my servo drive.Best Regards Sergio Rodriguez Plant chiefProduction DepartmentAv. Los pinos #7 A Col. Los pinosGuadalajara, Jalisco, Mexico.www.damy.com

➡️ Reply Nsk

📝 yasser said:

good evening .i hope all stuff ok. plz i have proplem, in my netestal machine about robot moving hand .this problem come from servo drive give me error f4 and i read in book its friom emergency switch but i check all emergency ok. i try another drive it work and give letter C but problem difference software with respect to servo motor.tell me what i can do .and thanx alot OUR SERVO DRIVE IS ESA-Y2020tf1-11 and trhe new servo i try is ESA-Y2020TF8-21 PLZ ANSWER MEAS SOON AS POSSIBLE

➡️ Reply Nsk

📝 Olaf Rekman said:

Dear sir,I am looking for a new or rebuilded NSK driver TYPE EMB014AF-2-05Please let me know.Regards - Olaf

➡️ Reply Nsk

📝 TOMAS MARIN said:

I GOT A PROBLEM BUT I DONT KNOW WHERE COULD BE IF IN MOTOR OR IN DRIVE MY DRIVE IS AN NSK ESA Y3040TF120 AND THE MOTOR THE FAULT ON THE DRIVE IS F-1 AND A- 4 AND THE MAIN PROBLEM IS ON THE TOURRET INDEXING SO I CAN NOT SEE ON DYSPLAY THE NUMBER OF THE TOOL

➡️ Reply Nsk

📝 Chester Yong said:

dear sir,I would to check that do you able to repair this NSK driver model: ESA 23?

➡️ Reply Nsk

📝 James Park said:

Hello,We have a upper and lower driver we need to get repaired. The type is ESA-B014CFC-21 and the NO. is B-13004-700. They both are not accurate so we were wondering if we can send them to you guys and have the calibrated. Please give me a call back or shoot me an email and hopefully we can figure something out. Hope to hear from someone soon. Thank you!

➡️ Reply Nsk

📝 Doreen Rogers said:

Hello, I am looking for the following bearing for NSK RW1410FN523 servo motor.The part number is 150DXR007DD / NRXT15025 C8P5 sealed bearing outer race / inner race Is this something you may have available for sale ?

➡️ Reply Nsk

📝 Curtis Indy said:

We are running an NSK ESA-Y2020A25-21 drive. On startup it displays an error code of E0A4. What is this error and is it a repair situation?

➡️ Reply Nsk

📝 Olaf Rekman said:

Dear Sir,I am looking for a programming terminal for NSK driver type EMBO14AF2 Looking forward to hear from You,Best regardsOlaf RekmanStokkanhaugen 1167048 Trondheim – NorwayPhone +47 90963306olafrekman@gmail.com

➡️ Reply Nsk

📝 Kevin Lim said:

My Scanray X-ray systems having the problem to activite X-ray operation, every time Im switched on the X-ray operation and it turn down immediately, and the control panel can not adjust the Ma setting. it is always fixed at 2Ma.

➡️ Reply Nsk

📝 Maher Amara said:

If its possible to repqir the SERVO DRIVE NSK type EMOAOBK13-05SPR-T4/Z-NS

➡️ Reply Nsk

📝 BesterPreisvergleich said:

Hallo, ich habe eine tolle Seite entdeckt,bei der man einfach den billigsten Preis fur allerlei Dinge suchen kann. Hier ist der link Bester Preisvergleich Ach ja, ausserdem findet man dort jede Menge Gutscheine, was naturlich toll ist!.

➡️ Reply Nsk

📝 Victor sciarrillo( delta steel) said:

We have a couple machines that use NSK drivesType:EM1010A15-05No. 103554-591The machine manufacturer said they are obsolete and cant sell us one. We willbuy new or rebuilt if you have either.

➡️ Reply Nsk

📝 Alex Cheong said:

Dear Sir,We are trading company located in Malaysia looking for the possibility to repairing several type of OEM NSK DD motor and Driver as below,DD Motor type,1) M-JSB015FA503DD motor Drivers,2) M-ESA-D017-CF13) ESA-JB015CF3-204) M-EDC-PS3015CB5F5-01Kindly advise the possibility, prices, lead time, other terms and condition.Your highly prompt respond much appreciate.Thanks. ( Alex Cheong )

➡️ Reply Nsk

📝 Andy said:

We are working on our study thesis and our problem is we cant get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. Theres no C2 warning on the Display. Any ideas what could be the problem of the drive and how we could possible solve this? Thanks for any Ideas. Andy

➡️ Reply Nsk

📝 MARIO BALANDRAN said:

we are look9ing for KSK drive EE1010A98-25

➡️ Reply Nsk

📝 Tafheem said:

NSK ESA-Y3008A25-21 power supply unit is not turning on despite being plugged in. Need immediate repair assistance.

➡️ Reply Nsk

📝 Alain David said:

I am a business customer inquiring about repair service for my NSK FMDI 01 MDI Pendant. The unit is not turning on at all, despite multiple attempts to power it up. I have checked the power source and cables, and they seem to be in proper working condition. The estimated replacement cost for a new NSK FMDI 01 MDI Pendant is approximately $500.

➡️ Reply Nsk

📝 Eric Ronnebaum said:

Dear sales I need a repair on a nsk RW1410FN523 motor. My customer is stating it making loader then normal noises and it harder to rotated by hand. The NSK amplifier is M-EP1410A15-05We would like to have a estimate if possible to go through it. I dont know if this is possible without looking at the unit but if you have done this particular motor before can you provide a worst case quotation. Regards,Eric Ronnebaum

➡️ Reply Nsk

📝 Leo Solomon said:

Gud DayThe NSK ESA-Y2003A23-21 driver that we have is having a big trouble on its communication , it wont make the motor to initialize, it only goes on one side of initialization and does not goes to its original position, but when we try to manually rotate it using handy controller configuration, it smoothly rotates clockwise and vise versa, we have tried using a different motor in order to verify if its the motor that is not good or the driver, and we have concluded that its the driver that is defective, hope you could help me, we badly need it, thanks in advanceLeo

➡️ Reply Nsk

📝 ScottHug said:

Hi

➡️ Reply Nsk

📝 NormanLew said:

Hello. And Bye.

➡️ Reply Nsk

📝 dao said:

The Nsk esa-j1003af2-11 ESA Servo Drive is malfunctioning, causing a production line downtime. Urgent repair is needed to restore operations

➡️ Reply Nsk