Welcome to OKU

We repair a wide range of OKU Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Free Estimates
• Low Prices

No repair summaries available yet for this manufacturer.

Comments for OKU

📝 GR said:

The monitor on the Okuma 5000 LSC OSP5001.G is malfunctioning, affecting production line efficiency. Please address this issue— Purchase or Repair:

➡️ Reply Okuma

📝 Iliev said:

The monitor on the Okuma 5000 LSC OSP5001.G is malfunctioning, causing delays on the production line. Please address this issue urgently to minimize downtime and resume operations— Purchase or Repair:

➡️ Reply Okuma

📝 Faizal Khan said:

The monitor on the Okuma 5000 LSC OSP5001.G is flickering intermittently, affecting the production line. Need urgent repair to avoid disruptions.— Purchase or Repair:

➡️ Reply Okuma

📝 Nunes said:

The Okuma BDU-75A E4601-413-001 servo drive is malfunctioning, causing a halt in production. It needs immediate attention for the production line to resume operations swiftly. Please prioritize resolving this issue to minimize downtime.— Purchase or Repair:

➡️ Reply Okuma

📝 Eddie Elliott said:

Hello, Im interested in the Okuma BDU-75A E4601-413-001 servo drive. Im not entirely certain if this is the right model, but my team suggested I reach out. Could you please provide information on pricing and availability? I am looking to source this unit quickly. Thank you.— Purchase or Repair:

➡️ Reply Okuma

📝 McAlexander said:

Can the Okuma BDU-75A E4601-413-001 servo drive be repaired or bought? Im trying to check this off my to-do list.— Purchase or Repair:

➡️ Reply Okuma

📝 Wingo Kwok said:

I am following up on my previous message regarding our Okuma Machinery Works BL-D50A E4809-770-015-B, which is currently down. We need assistance with the motor. Please reply— Purchase or Repair:

➡️ Reply okuma machinery works

📝 Vassilis said:

Received an alert for a failure on the OKUMA 1006-0614-63-16 BLII-D100A SERVO DRIVE. Heading over to assess the issue now.— Purchase or Repair:

➡️ Reply Okuma

📝 CATOIRE said:

Can the Okuma Machinery Works BL-D50A E4809-770-015-B motor be repaired or purchased? Trying to check this off my to-do list.— Purchase or Repair:

➡️ Reply okuma machinery works

📝 Rob K said:

I have an Okuma Operator panel 5020 LSY E0105-800-138 That is in need of repair or replacement. Can you provide a Quote?— Purchase or Repair:

➡️ Reply Okuma & Howa

📝 robert wirtel said:

We have an Okuma 5020L and the glare filter on the screen broke and has been missing for years. Do you know where we can get another one?Thank you— Purchase or Repair:

➡️ Reply Okuma & Howa

📝 Valeria said:

The Okuma LB15 E4809-770-015-B servo velocity controller board malfunctioned mid-shift. Requires immediate attention and troubleshooting. Please investigate and resolve asap. Thank you. — Purchase or Repair:

➡️ Reply Okuma

📝 Beasely said:

We are experiencing issues with the Servo Velocity Controller Board (Okuma LB15 E4809-770-015-B) affecting the line. Please prioritize addressing this matter to minimize production downtime. — Purchase or Repair:

➡️ Reply Okuma

📝 Shree kumar jha said:

The Okuma PPS60C E4809-747-005-E board went down during last nights shift. Please address the issue — Purchase or Repair:

➡️ Reply Okuma

📝 marchal said:

Experiencing issues with Okuma LB15 E4809-770-015-B Servo Velocity Controller Board. Need this industrial unit repaired — Purchase or Repair:

➡️ Reply Okuma

📝 Bryan Sutherland said:

Could you please provide information regarding the availability of support or replacement parts for the Okuma PPS60C E4809-747-005-E board? — Purchase or Repair:

➡️ Reply Okuma

📝 lloyd kerr said:

The Okuma LB15 E4809-770-015-B Servo Velocity Controller Board is currently not working and needs maintenance attention. — Purchase or Repair:

➡️ Reply Okuma

📝 Ignacio Pinedo said:

We experienced unexpected downtime with the Okuma PPS60C E4809-747-005-E board earlier today during the morning shift. Can you provide some insight on what might have caused the issue and recommend a course of action to prevent it from happening again? Your — Purchase or Repair:

➡️ Reply Okuma

📝 Gamal said:

Hi there, Im reaching out for repair info on an Okuma PPS60C E4809-747-005-E board thats not working. Can you please provide guidance on how we can go about fixing or replacing it quickly? Thank you! — Purchase or Repair:

➡️ Reply Okuma

📝 Woolley said:

Please advise if the Okuma PPS60C E4809-747-005-E board is still supported or if replacement parts are available. Thank you. — Purchase or Repair:

➡️ Reply Okuma

📝 Brian Deese said:

Can you please provide pricing and availability information for the Okuma LB15 E4809-770-015-B Servo Velocity Controller Board? We are looking to source this unit quickly and want to ensure it is the correct model. Thank you! — Purchase or Repair:

➡️ Reply Okuma

📝 Nadeem Mohammad said:

The Okuma BDU-50-A servo drive in my equipment isnt functioning properly - its failing to control the motor speed correctly, resulting in disrupted operations. Given the importance of this unit, I would like to inquire about repair services and the estimated replacement cost should repair not be feasible.— Purchase or Repair:

➡️ Reply Okuma

📝 JOHNNY MARTINEZ said:

The Servo Velocity Controller Board (part number E4809-770-015-B) on the Okuma LB15 machine is malfunctioning, causing a significant slowdown in production. We need urgent repair service to resolve this issue — Purchase or Repair:

➡️ Reply Okuma

📝 Scot said:

Hello, I am interested in purchasing an Okuma LB15 E4809-770-015-B Servo Velocity Controller Board. I just wanted to confirm the pricing and availability for this unit. I am looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Okuma

📝 Brenda Forrester said:

The Okuma LB15 E4809-770-015-B Servo Velocity Controller Board is not working as reported from the shop. — Purchase or Repair:

➡️ Reply Okuma

📝 Anthony Monteiro said:

Could you please confirm if the Okuma LB15 E4809-770-015-B Servo Velocity Controller Board is still supported or if replacement parts are available for this unit? Thank you. — Purchase or Repair:

➡️ Reply Okuma

📝 bromell said:

The Okuma LB15 E4809-770-015-B Servo Velocity Controller Board is exhibiting irregular behavior. It is not functioning as it typically does, displaying unusual actions. — Purchase or Repair:

➡️ Reply Okuma

📝 manoni paolo said:

Can the Okuma LB15 E4809-770-015-B Servo Velocity Controller Board be repaired or purchased? I am looking to — Purchase or Repair:

➡️ Reply Okuma

📝 Catherine Corcoran said:

The unit is still down. I need assistance with the Okuma LB15 E4809-770-015-B Servo Velocity Controller Board. I expect a response this time. Thank you. — Purchase or Repair:

➡️ Reply Okuma

📝 Silverio Espinoza Roque said:

Could you please confirm if the Okuma PPS60C E4809-747-005-E board is still supported or if replacement parts are available for this unit? Its older, and our team is uncertain about the manufacturer. Thank you. — Purchase or Repair:

➡️ Reply Okuma

📝 Duff said:

the Okuma PPS60C E4809-747-005-E board went down mid-shift. Need someone to look into this ASAP tomorrow. Appreciate it! — Purchase or Repair:

➡️ Reply Okuma

📝 Olga said:

Do you have an Okuma PPS60C E4809-747-005-E board available for sale or repair? Our unit went down and we need to keep production running. — Purchase or Repair:

➡️ Reply Okuma

📝 Jr. said:

Hey there! Just a heads-up, one of the drives or boards on the Okuma OPUS 5000 Module has failed. Need to check it out ASAP.— Purchase or Repair:

➡️ Reply Okuma

📝 Johann Ogmundsson said:

The Okuma LB15 E4809-770-015-B is showing error code E-#### (specific code). The equipment is not responding and the servo velocity is not being controlled properly. Please advise on necessary steps to troubleshoot and resolve the issue — Purchase or Repair:

➡️ Reply Okuma

📝 Mrs said:

Hello, I am interested in purchasing an Okuma LB15 E4809-770-015-B Servo Velocity Controller Board. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Okuma

📝 Dwight said:

Were experiencing issues with the Servo Velocity Controller Board (Okuma LB15 E4809-770-015-B). The board is failing and affecting the lines production speed. Please address this immediately to ensure minimal downtime. — Purchase or Repair:

➡️ Reply Okuma

📝 Luchyk said:

Hey, the Okuma LB15 E4809-770-015-B servo velocity controller board failed. Need to swap it out ASAP to get the machine back online. — Purchase or Repair:

➡️ Reply Okuma

📝 Russ Vatalaro said:

Okuma LB15 E4809-770-015-B servo velocity controller board is malfunctioning, affecting the lines production. Urgent repair or replacement needed to resume operations immediately. — Purchase or Repair:

➡️ Reply Okuma

📝 McShane said:

Hello, I need repair information for an Okuma LB15 E4809-770-015-B Servo Velocity Controller Board. Can you please provide details on how we can proceed with the repair? A quick response would be greatly appreciated. Thank you. — Purchase or Repair:

➡️ Reply Okuma

📝 wayne sanders said:

Do you have an Okuma PPS60C E4809-747-005-E board available for sale or repair? Our unit went down, and we need to keep production running. — Purchase or Repair:

➡️ Reply Okuma

📝 saavedra said:

The Servo Velocity Controller Board on the Okuma LB15 E4809-770-015-B just failed, requiring immediate attention to ensure production is not impacted. — Purchase or Repair:

➡️ Reply Okuma

📝 Aleksey said:

We apologize for the lack of response regarding your Okuma LB15 E4809-770-015-B. We will address the issue — Purchase or Repair:

➡️ Reply Okuma

📝 hossam said:

Hello, we are in need of repair information or a replacement for the Servo Velocity Controller Board (part number E4809-770-015-B) for our Okuma LB15. Could you please provide an estimate for repair or guide us on how to source a replacement? Your — Purchase or Repair:

➡️ Reply Okuma

📝 PAEZ said:

The Okuma PPS60C E4809-747-005-E board is not working. — Purchase or Repair:

➡️ Reply Okuma

📝 Glenn Beaver said:

Hi there, One of our Okuma MIV0204A-1-B5 Servo Drives has malfunctioned and we need a replacement. Could you please provide us with repair information— Purchase or Repair:

➡️ Reply Okuma

📝 Brambley said:

Can the Okuma BDU-30A Brushless Servo Drive be repaired or purchased? Im looking to resolve this as soon as possible. Thank you.— Purchase or Repair:

➡️ Reply Okuma

📝 John Gadus said:

Hello, I see that the Okuma 1006-1231-76d is still down and no one has responded to the previous message. Can we please have someone address this issue immediately? Thank you.— Purchase or Repair:

➡️ Reply Okuma

📝 Ricky said:

Repair Issue Report for Okuma e4809-045-038-b1911Description UnknownDear Repair Shop,I am the inventory manager at our facility and have noticed that the Okuma e4809-045-038-b1911 unit has been consistently returned or reported. According to our records, multiple customers have cited various issues with this unit, yet the specific problem remains undisclosed. Your attention and expertise in diagnosing and resolving this recurring issue would be greatly appreciated.Thank you for your— Purchase or Repair:

➡️ Reply Okuma

📝 Miguel Reyes said:

Okuma 1006-1231-76d not powering on, no display or response. Need urgent repair service, please advise availability.— Purchase or Repair:

➡️ Reply Okuma

📝 Jeff Latsch said:

The Okuma 1006-1216-42-198 unit is not working as reported by the user in the shop.— Purchase or Repair:

➡️ Reply Okuma