Omniguard specializes in producing advanced leak detection systems for industrial applications. They are known for their cutting-edge technology that helps businesses identify and mitigate leaks to ensure safety and environmental compliance. [AI]
We repair a wide range of Omniguard Equipment.
Ask questions, or 1-336-969-0110 for faster service.
Use the search bar above to find specific manufacturers.
The UV/IR Test Source model OmniGuard 540 is designed to simulate ultraviolet (UV) and infrared (IR) radiation to test the functionality of flame detectors and fire alarm systems in industrial settings. It features adjustable intensity levels for both UV and IR sources, as well as a wide emission angle for comprehensive coverage during testing. Common failures may include power supply issues, faulty intensity control mechanisms, or degradation of the UV/IR sources over time, requiring replacement or recalibration to ensure accurate testing results. Regular maintenance and calibration are recommended to guarantee the device's reliability and accuracy in detection system testing.
The OMNIGUARD 540 battery-operated UV/IR test source is designed for industrial applications to test ultraviolet and infrared flame detectors. It emits both ultraviolet and infrared light to simulate flame conditions for detector testing. The device includes a built-in timer and control panel for easy operation. Common failures include battery issues, light source degradation, and circuit board malfunctions. Regular maintenance and calibration are essential to ensure accurate and reliable testing results.
The U/V-IR Fire Detector, model OMNIGUARD 730-00463313710, is a specialized device designed for industrial applications to detect fires using ultraviolet and infrared technology. This unit features high sensitivity and precision in fire detection, making it suitable for use in critical environments where fast and reliable fire detection is essential. Common failures in this device may include sensor degradation, dirt accumulation on the sensor surface, or electronic component malfunctions. Regular maintenance and calibration are recommended to ensure optimal performance.
The Omniguard 4 pressure recorder is designed for industrial applications to accurately measure and record pressure variations over time. This device features high precision sensors, user-friendly interface for setting parameters, and the capability to store and retrieve data for analysis. Common failures include sensor malfunction, data storage issues, and software glitches resulting in inaccurate recordings. Routine calibration and maintenance are necessary to ensure consistent and reliable performance.
The U/V-IR Fire Detector model OMNIGUARD 730-00463313710 is a sophisticated industrial electronic component designed to detect fires by sensing ultraviolet and infrared radiation. Its main features include high sensitivity to both types of radiation, robust construction for industrial environments, and reliable performance under various conditions. Typical failures of this device may include sensor degradation, circuit board faults, or communication errors, which can impact its fire detection capabilities and require prompt repair or replacement.
The UV/IR Detector unit, model Omniguard 752-00463313710, is designed for industrial applications that require reliable and accurate detection of ultraviolet and infrared radiation. This device is used for fire and flame detection in processes such as combustion control and safety monitoring. Features of this UV/IR Detector include high sensitivity to UV and IR radiation, a fast response time, and a rugged construction suitable for harsh industrial environments. The device is typically mounted in a strategic location to provide continuous monitoring of flame presence or intensity. Common failures in UV/IR Detectors can include sensor degradation due to exposure to high levels of radiation, contamination of the optical surfaces, or electrical faults in the signal processing circuitry. Regular calibration and maintenance are recommended to ensure optimal performance and reliability of the unit.
The Omniguard III pressure recorder is a sophisticated device utilized in industrial applications to accurately measure and record pressure levels over time. Its main features include high precision sensors, data logging capabilities, and a user-friendly interface for data analysis. Common failures in this device typically stem from sensor issues, data storage malfunctions, or power supply problems. Proper maintenance and calibration are essential to ensure accurate and reliable pressure recordings.
The UV/IR fire detector, OmniGuard 753-22202311210, is designed to detect flames in industrial settings. It utilizes both ultraviolet (UV) and infrared (IR) detection technologies to provide reliable flame detection. The UV sensor detects flames that emit UV radiation, while the IR sensor detects flames that emit IR radiation. Typical failures in UV/IR fire detectors include sensor malfunction, wiring issues, or environmental factors affecting the sensor sensitivity. Regular maintenance and calibration are necessary to ensure proper functioning of the detector.
The Omniguard 4 is a pressure recorder used in industrial settings to monitor and record pressure levels over time. It features a digital display for real-time pressure readings, data logging capabilities for storing pressure data, and alarm functions to alert users of pressure deviations. Typical failures include sensor malfunctions, display issues, and data logging errors. Regular calibration and maintenance are recommended to ensure accurate pressure measurements.
The OmniGuard 540 is a UV/IR test source primarily used for testing and calibrating flame detectors in industrial settings. This device emits both ultraviolet (UV) and infrared (IR) light to simulate flames at various distances and intensities. The OmniGuard 540 is equipped with adjustable settings for both UV and IR outputs to accurately test the sensitivity and response of flame detectors. Typical failures in the OmniGuard 540 may include malfunctioning UV or IR light sources, faulty calibration controls, or inaccuracies in output levels. Regular maintenance and calibration are recommended to ensure accurate testing results.
I have an OmniGuard 540 UV/IR Test Source unit that is malfunctioning. The unit is not emitting any UV or IR light when powered on, and none of the control buttons respond. Despite attempting to troubleshoot the issue by resetting the unit and checking all connections, the problem persists. Based on my evaluation, I suspect there may be an internal circuitry issue that is preventing the light sources from functioning properly. To have the OmniGuard 540 repaired, the estimated replacement cost could range from $200 to $400, depending on the extent of the repairs needed and the availability of replacement parts. I am interested in obtaining repair service for the unit as soon as possible to ensure its optimal functionality within my business operations.— Purchase or Repair:➡️ Reply Omniguard
It seems like your Omniguard 4 pressure recorder is not powering on or responding to any commands. This may indicate a possible electrical issue or internal malfunction. The estimated replacement cost for the Omniguard 4 is typically high due to its advanced features, so its important to have it inspected and repaired by a professional technician— Purchase or Repair:➡️ Reply Omniguard
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.
Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.