Opto specializes in the production of high-quality optical sensors and components that are widely used in various industrial automation and robotics applications. Their cutting-edge technology and precision engineering have positioned them as a trusted supplier for companies seeking reliable optical solutions. [AI]
We repair a wide range of Opto Equipment.
Ask questions, or 1-336-969-0110 for faster service.
Use the search bar above to find specific manufacturers.
The Opto 22 b4 is a digital output module designed for industrial automation applications. It converts digital signals from a controller into corresponding outputs to control external devices such as relays, lights, or solenoids. The module features 4 isolated open-collector outputs, which are capable of switching up to 5-60 VDC and sinking up to 3A per channel. Common failures with the Opto 22 b4 module typically include output channel failure due to overcurrent or short circuits, as well as damage to the input circuitry from excessive voltage or reverse polarity. Regular maintenance and monitoring of input signals can help prevent these failures.
The Opto 22 007214D is a solid-state relay designed for industrial applications. It is used to control electrical loads without the need for mechanical contacts, providing reliable and silent operation. The device features a small form factor, high switching speed, and long operational lifespan. Typical failures of the Opto 22 007214D include overheating due to high current loads, component degradation over time, and damage from voltage spikes or transients. Regular maintenance and monitoring can help prevent these issues and ensure the continued performance of the solid-state relay.
The Opto 22 model 200 is a digital output module used in industrial automation applications. It is designed to control external devices such as relays, solenoids, and motors based on input data from a controller. The module features 16 digital output channels that can be individually controlled. Typical failures of the Opto 22 model 200 include internal relay failures, output transistor failures, and communication issues. These failures can occur due to overloading, power supply issues, or external factors such as electrical noise. Regular maintenance and testing can help prevent these failures and ensure the reliable operation of the module.
The Opto 22 005131d is a digital output module used in industrial automation systems. It features 16 channels with a voltage rating of 5-32 VDC and a current rating of 3A per channel. This module is commonly used for controlling various devices such as solenoid valves, motors, and indicator lights in manufacturing and process control applications. Typical failures in the Opto 22 005131d module can include output channel failures due to short circuits or overloading, communication issues with the control system, and damage to the internal circuitry caused by electrical spikes or environmental factors. Regular maintenance and testing are recommended to ensure reliability and performance.
The Opto 22 G4PB24 is a digital I/O module designed for industrial automation applications. It features 24 digital input channels, which can be used to monitor various devices and signals in a control system. Typical failures in this model include shorted input channels, damaged connectors, and failures in the internal signal processing components. Regular maintenance and testing can help prevent these issues and ensure the reliable operation of the module in industrial environments.
The Opto 22 PB32P2 is a digital output module commonly used in industrial automation systems. It functions as a solid-state relay that can control various loads such as motors, lights, and valves. The module has 32 channels, each capable of sourcing up to 3.0A at 60VDC. Typical failures include short circuits, overloading, and component aging leading to unreliable switching of loads. Routine maintenance can help prevent premature failures.
The Opto 22 PB32HQ is a digital output module that is designed to provide reliable control of high-voltage devices in industrial automation systems. This module features 32 isolated, open-collector outputs capable of handling up to 60VDC and 3A per channel. Typical failures of the Opto 22 PB32HQ may include damaged output transistors, blown fuses, or issues with isolation between channels. Regular maintenance and proper wiring practices can help prevent these failures and ensure the module's longevity in industrial applications.
- Purpose: The Opto 22 5300-0003 is a digital I/O module used in industrial automation systems to interface with sensors, switches, and other input devices, as well as control actuators, relays, and other output devices. - Features: This module has 16 digital input channels and 16 digital output channels, with optically isolated circuits to protect the module and the connected equipment from electrical faults. It communicates with the control system through a standard communication protocol. - Typical Failures: Common failures in the Opto 22 5300-0003 include blown fuses, damaged input or output channels due to overvoltage or overcurrent conditions, and communication issues with the control system. Additionally, component degradation or poor connections may cause intermittent failures in the module. Regular maintenance and inspection can help prevent such issues and ensure the module's reliable operation in industrial settings.
The Opto 22 PB16A-800AC is a digital output module designed for industrial control applications. It features 16 channels of 800 mA, 24-280 VAC solid-state relays, providing reliable switching of AC loads. Typical failures in this device include relay failure due to overcurrent or overheating, as well as damage to the control circuitry from electrical spikes or surges. Regular maintenance and monitoring of the relay contacts can help prevent unexpected failures.
The Opto 22 G4PS245A is a solid-state power relay designed for industrial applications. Its primary purpose is to switch high-current AC loads in industrial automation systems. Key features of the Opto 22 G4PS245A include its DIN rail mountable design, zero-crossing detection to minimize electrical interference, and the ability to control loads up to 3 amps. Typical failures of the Opto 22 G4PS245A may include overvoltage or overcurrent events leading to component failure, internal contamination causing malfunction, and failure of the zero-crossing detection circuitry. Regular maintenance and monitoring of electrical parameters can help prevent these failures.
Hello, our OPTO-22 G4RA ULTIMATE I/O is currently down. There seems to be a continuous flashing red light on the unit. Were unable to access any of the connected sensors. Please advise on how to troubleshoot and resolve this issue. Thank you.➡️ Reply Opto-22
The Opto 22 001788k unit is not functioning correctly. Maintenance team needs assistance. Please advise. Thank you.— Purchase or Repair:➡️ Reply Opto 22
Hello, Im hoping to check this off my to-do list. Can the Opto 22 B6 be repaired or replaced? Thank you.— Purchase or Repair:➡️ Reply Opto 22
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.
Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.