We repair a wide range of R Equipment.
Ask questions, or call 1-336-969-0110 for faster service.
Use the search bar above to find specific manufacturers.
No repair summaries available yet for this manufacturer.
Do you have or could help me find a wiring diagram for a Randtronic DC Drive Model: SB-250Thanks➡️ Reply Randtronics
I also have the same model but have no wiring diagram. Could you help with this?➡️ Reply Randtronics
industrial machinery 3 phase wiring diagram➡️ Reply Randtronics
faster pc based control available ?std 1.44 floppyeasy edit on std pcetc➡️ Reply Robotool
Cannot Autohome X Axis switch is open➡️ Reply Robotool
I have a Rittenhouse Home Intercom, Model No. M7010 that had no audio. A technician said the amplifier was bad and he replaced several transistors in it, but the volume is very weak. He does not know exactly what transistors to use to replace the old ones, and does not have a schematic. Can you provide a schematic, or tell me where I might get one? Thanks, Tom Mitchell➡️ Reply Rittenhouse
The reception is pretty poor and weak on the volume. Do your know if there is an transisterized replacement receiver that will fit into the 1970s model. Thanks, David......➡️ Reply Rittenhouse
sheetrocking my house after it was flooded by katrina, the contractor stupidly threw away the master station to my doorbell/radio/intercom system which rendered the system inoperable. i have asked an electrician friend to look at it and he cannot find a suitable retrofit. we will have to replace the whole system which includes one substation and four remote stations. i am looking for recommendations of brands to replace it with (nutones white, plastic master stations dont suit my mid-century modern home). i am looking for industrial-looking, high-end brushed chrome or nickel ones.or if anyone has a master station they would like to sell me, that would be terrific... many thanks!!➡️ Reply Rittenhouse
Hello. I have an Emerson-Rittenhouse Door Chime Model RC577 and it has quit working. I was wondering if there is a replacement transmitter available for this chime. It has the motor attached to the transmitter so I dont htink I can get a replacement at a store. Any information you could give me would be greatly appreciated. Thank you. Adrian Younger➡️ Reply Rittenhouse
we have an old rittenhouse intercom system. the units look old but still works fairly well. need information on how to update system look without replacing entire system. were remodeling in some areas and would like to check out updating units. dont have specs on the system. not sure of➡️ Reply Rittenhouse
My unit is in need of repair, can you help ?➡️ Reply Rittenhouse
This is an old system I would like to replace. Does the wire plugs have to be replaced. I would like sm=omthing that will be compatable with the wire plugs. Do you have any suggestionsThank You➡️ Reply Rittenhouse
The main unit needs repair!H.O.Mertens➡️ Reply Rittenhouse
Eight chime unit 552 repeats sequence continually until switch is disconnected. Switch has been replaced but problem continues----any ideas and is it repairable.....➡️ Reply Rittenhouse
have hooked up several ways appear to only chime once as if wired for back door.clock woriks fine, does ot chime on all tones➡️ Reply Rittenhouse
I AM LOOKING FOR A DOOR CHIME FOR MY BUSINESS THAT WHEN SOMEONE ENTERS THE FRONT DOOR THAT I WILL BE ABLE TO HEAR THE CHIME IN OTHER AREAS OF MY BUILDING AS WELL. I NEED SOMETHING THAT WILL HAVE A LOUD CHIME BECAUSE MY BUILDING HAS MACHINERY RUNNING ALL THE TIME. CAN YOU SEND ME SOME INFORMATION. THANK YOU➡️ Reply Rittenhouse
This problem may be caused by a lighted doorbell. After the bell is wrung, the light will re-illuminate. When that happens it may be drawing just enough power to make the door chimes think that the button was pressed once again. This is a repeating pattern.If a lighted door button is used, the solution is to either replace the button with a non-lighted version, or open the button and disconnect the light inside it.Yes, I had this problem myself. I had replaced an old doorbell button with a new, lighted one. I ripped out the tiny light inside and it worked fine after that.➡️ Reply Rittenhouse
I have the exact same problem, but its not caused by a lighted doorbell. Without the doorbell connect (and not crossing the wires) the chime mechanism keeps repeating. Im not sure whether its because the contacts arent lined up correctly or whether its a wiring problem. Ive tinkered and tinkered to no avail.➡️ Reply Rittenhouse
I bought a house built in 1950 with an old Rittenhouse door chime, Model #365. I have no idea if it can be repaired. I dont have the front door button. The inner workings are very dirty. Do you think its worth sending to you? Thanks, Kathie➡️ Reply Rittenhouse
My manual says 4-8 Note Chime Models (534, 535, 552, 577, 618, 633). I dont know which one I have. It has long chime tubes and a clock on top. The door bell works great, but the clock doesnt.➡️ Reply Rittenhouse
I would like to install my RC633 which I removed from my old house. Can you send me instructions? Thank you.➡️ Reply Rittenhouse
I need a power suply for my Emerson-Rittenhouse model RC 633➡️ Reply Rittenhouse
I have a clock and doorchimes door bell model RC-633.I would like to get relacement part for the door bell part the clock is still working.Can you help me➡️ Reply Rittenhouse
I have a clock and doorchimes door bell model RC-633.I would like to get relacement part for the door bell part, the clock is still working.Can you help me➡️ Reply Rittenhouse
I need a replacement part for this devise.➡️ Reply Rittenhouse
Our old doorbell cover on our doors is broken, how and where can we find new or different( maybe clear plastic cover) for the doorbell Thank you➡️ Reply Rittenhouse
I need wiring schematic for Emerson door chime model C8578-1➡️ Reply Rittenhouse
I know this chime assembly is very old but is there a replacement kit for the hammers. they are sticking and perhaps the springs are just too soft. Id appreciate any help you can give me.➡️ Reply Rittenhouse
Hi, I have a Rittenhouse 330 Chime that is not working. Is there a way to get a rough estimate of cost? It may be the transformer or the hammers as they are sticky.David➡️ Reply Rittenhouse
It appears the hammers are sticking or a spring has broken. There are three. Can i get replacement solenoids/hammers, or an estimate to repair the whole Chime unit. Also if you think it would be best to buy new.Thank you.,John➡️ Reply Rittenhouse
Can I order a replacement transformer for this doorbell from you?➡️ Reply Rittenhouse
I have a very old doorbell/ clock combination. The Model # is 450. The chimes work but not the clock. Since it is installed into the wall is there one the will replace using the same insert?➡️ Reply Rittenhouse
The clock works fine. Three of the door chimes work, but the fourth and fifth strikers do not work. Do you repair and or have parts to recondition? Thanks, Tedd➡️ Reply Rittenhouse
Hellohave a 520 Beverly and it is working but I took it apart and found the rubber grommets and the felt strike pads are bad i am looking for replacements.ThanksChris➡️ Reply Rittenhouse
I TOOK THE CLOCK TO A ANTIQUE DEALER HE TOOK THE MOTOR OUT AND REPLACED IT WITH A BATTERY UNIT. I AM LOOKING TO REPLACE IT BACK WITH THE ORIGINAL MOTOR.➡️ Reply Rittenhouse
need a sequence timer for a emerson rittenhouse model # 632 631➡️ Reply Rittenhouse
Trying to obtain new springs and strikers/drivers➡️ Reply Rittenhouse
Years ago lightening hit house the chime stoped working the unit is in the kitchen and of coarse the door bell at the front door to push with finger ..doesnt work anymore can this be fixed ??/➡️ Reply Rittenhouse
how do we get this old door chime to work again?were already replacing the batteries, what else should we do?thanks➡️ Reply Rittenhouse
I need a Rittenhouse door bell botton part number C8000. Is this womethign you may have?➡️ Reply Rittenhouse
Part #C80Q0 door bell switch.Can I order a replacement ?➡️ Reply Rittenhouse
I own a late 60s Emerson Rittenhouse Model RC633 door bell Chime.The clock works fine but the door bell doesnt.I believe there is a problem with the motor.Can I have this unit repaired and approximately the cost?➡️ Reply Rittenhouse
I have a Rittenhouse chime Model #410 with its companion two chime on second floor of our 1927 home. The door bell chime works however we are not getting all chimes to work. Only two tones downstairs. Can this be repaired? Please advise.Also, can you tell me how old this model of Rittenhouse is?Maryellen C. Boudria➡️ Reply Rittenhouse
What transformer do I need for this?Thanks➡️ Reply Rittenhouse
I have three doorbells connrcted to chimes but only one works, any suggestions?➡️ Reply Rittenhouse
I need to purchase a new door bell system comparable with the existing system. I have a one unit on the main level and the other in the basement. The Model number of the existing system is C8203 16 volts AC. I need both units to include outside switch. Also where are the transformers located for this? V/R Charlie➡️ Reply Rittenhouse
Im working on a unit which has been in the family for years.Emerson- Rittenhouse RC 633, 16 voltOne of the solenoid/hammers dont work. Seems that the hammer is jammed in the tube. Id like to replace the solenoid. How may I order another one.Ron 305 803-5441➡️ Reply Rittenhouse
Ive recently come in the possesion of an emerson-rittenhouse model 633 door chime and clock. Somebody must have placed 120volts of power to the 16 volt circiut burning out all the electronics. I need all the electrical components including the hammars and motors. if anyone knows where i can get parts, please respond. thanks➡️ Reply Rittenhouse
Hello I have a Artolier Lighting and Sound Emerson Electric Co. Model C8535 the springs need replacing can you please Help thanks Norm➡️ Reply Rittenhouse
Do you sell parts for rittenhouse dooor chimes specifically Model #C8550 or do you know where I can get them?➡️ Reply Rittenhouse
I am looking for the cover that is a black plastic 8 3/8 wide, 5 1/2 high, and 2 1/8 deep. Any idea where I can find a suitable replacement? Thanks.➡️ Reply Rittenhouse
need wiring, replacement parts and pic of the model noted above. front door pushbutton lights, but no response from chime unit. the backdoor is working normal one chime. What may be wrong? the unit has a selector switch to scroll thru various chimes.➡️ Reply Rittenhouse
need wiring diagram for c8538r door chime➡️ Reply Rittenhouse
Is the volume of the chime adjustable?➡️ Reply Rittenhouse
Im looking for a replacement circuit board for a Rittenhouse model C8538. Please let me know where I can purchase one.➡️ Reply Rittenhouse
Cannot reset time seems stripped.Only two of the chimes work.Where are you physically located.ROUGH repair cost.➡️ Reply Rittenhouse
Im in need of a sequence timer for the above mentioned Emerson Rittenhouse clock/chimePlease advise on getting 1 of them by email or by calling me at 617/590-3509New or reconditioned➡️ Reply Rittenhouse
I need the three coils for the 526 Rittenhouse. ( a power surge burned 2 of the three).➡️ Reply Rittenhouse
I would like to get an estimate on testing and repairing any needed parts of our antique ( assuming it is antique,) doorbell. I love the way it sounds, from manually striking the chimes, but doesnt seem to work...➡️ Reply Rittenhouse
Did you locate the 3 coils you were looking for ? I also need one➡️ Reply Rittenhouse
I have a Rittenhouse Model 526.What would cost to test it?➡️ Reply Rittenhouse
Wee have an Emerson Rittenhouse doorbell model #RC552-1. The motor has fried itself. Can you repair? Thank you. H - (805) 685-2317➡️ Reply Rittenhouse
I have renovated my house. I have a Model RC577 chime that is not working. I seem to have all the parts, 4 chimes, motor, etc.Please help me figure out how to repair.thank you➡️ Reply Rittenhouse
The rheostat is broken on this unit otherwise the unit is as melodious as it was 40 years ago.The numbers on the rheostat are 1406417 and 135-51 The motor is a Telechron synchronous motor. 118V--16 Model 3151 RPM 3. W. 4.CantI purchase the replacement rheostat and have it shipped to PMB 399 at the above address. if so wat is the cost. I will pay by Visa and send my # before delivery.➡️ Reply Rittenhouse
Only one of four chimes works, although we detect a faint electronic buzzing, in sequence, of the other three. For example, we hear Chime A, buzz, buzz, pause, buzz, buzz, Chime A. As cover has been lost, we suspect dust and grime is keeping the other hammers from working.Can the unit be cleaned and a new cover puchased?Thank you,Miriam➡️ Reply Rittenhouse
We need to replace the long tubes on these chimes. They are look bad and we have lost one of them. Do you have the 4 tubes to replace the old ones with? If so, how much are they? Patsy➡️ Reply Rittenhouse
Can you advise if a Emerson Rittenhouse RC 577 Doorbell mechanical chime will work with a 24V Transformer?I have a 16V and wanted to add a camera to this?ThanksGene 732-754-1205I cannot locate a manual im guessing this was made in the 70s➡️ Reply Rittenhouse
Door Bell repair motor needed➡️ Reply Rittenhouse
I have a 30 year old rittenhouse door chime with the 4 sequential chimes, one of the plungers has gone lazy. I took the transformer out to try to clean it and lost the little spring that gives the plunger resistance . Do you have any ideas ?Or do you sell parts, perhaps a whole tansformer. I tried to find a similar spring,with no succes. Thank you D Carini.➡️ Reply Rittenhouse
Ihave about a 30 year old rittenhouse with 4 chimes.It seems that the solenoids that activate the strikers,are getting a little lazy.I have had one apart and try to clean it ,with not much succes,I even lost one of those tiny springs. I tried to replace it with a similar one ,but its not right.Do you carry replacement parts? What do you suggest? We love the unit,and we hate to give it up.Please give me some leads,I would appreciate it .Dominic.➡️ Reply Rittenhouse
we can not get it to chime in sequence. if doorbell is pressed it chimes once (#4).➡️ Reply Rittenhouse
I am looking for a cover to Rittenhouse, model 912 (possibly 812, numbers are difficult to read). Can you help?➡️ Reply Rittenhouse
Please contact me about the cover of the door chime Model c8204.We lost it during repainting the wall when we moved in 2 years ago.ThanksBrandon➡️ Reply Rittenhouse
Our current cover is kind of an almond color. After remodeling our living room, all of the vents, outlets, etc. have been done in white. Would it be possible to purchase a white cover to replace the almond one for our door chime? What would the cost be?Please respond even if not available before I resort to spray painting our current one. Thank you very much.➡️ Reply Rittenhouse
is there anyway i could get another one of these door bells?➡️ Reply Rittenhouse
This unit puts out a chirping sound (Similar to sound of a smoke alarm) on a continuous basis, one chirp about every 30 seconds. Please advise what I should do, short of disconnecting the unit, to stop this annoying sound.Thank you,Richard Baer➡️ Reply Rittenhouse
Sir: Please help me diagnose the problem of my C8204 door chime, andthis morning I heard a noisy sound from the unit. And please give menearest service center here in Chino hills, CalifornialThanks➡️ Reply Rittenhouse
Due to the worn-weakened spring on the hitting bar which do not pop out from the solenoid hole. Do you sell the spring or the entire solenoid with the hitting bar?➡️ Reply Rittenhouse
Lost during remodeling.➡️ Reply Rittenhouse
i am looking for the cover of the door chime for the above model that needs replacing.➡️ Reply Rittenhouse
Unit stopped working. Have 16+ volts coming to it but no sound. Assume the syncronous motor is out... Telechron model M3151, Type H18, 3.6 rpm, 60 cy, 16 v. Is the replacement motor available? Price?Could it be anything else? All wiring is in tact on board.Thanks, Bob➡️ Reply Rittenhouse
My model 552 is not working. Licensed Electrician checked it out and it need replacement parts. I want to keep actual doorbell, because of sentimental reasons.➡️ Reply Rittenhouse
Hi I need a cover for the rittenhouse door chime model 380 can u pls get back to me thank you➡️ Reply Rittenhouse
plungers have stopped (tried lube) is model w clock can they be replaced by myself or must this be done by a pro or can the entire panel be more easily replaced thank you➡️ Reply Rittenhouse
I am looking for a wiring diagram for a Rittenhouse, Spartan Electric, Fayettevile NC C8845 unit which is 30 to 35 years old. It seems to be either able to use two D cells or 16V transformer but I am got sure how to wire it up. Any ideas? Thanks.➡️ Reply Rittenhouse
This is a Mechanical doorbell with Electronic Control Board. I need Someone to give me an estimate for repair or tell me where I can get parts for this device. Thanks, Mark Wilson➡️ Reply Rittenhouse
My dad just passed away and Im moving his Rittenhouse Westminster clock/chime from his place to mine before selling the house. I believe it is a model 631 or 632 but Im not sure - WHERE CAN I FIND THE MODEL NUMBER? (Ive seen pics of what appear to be identical units labeled 631/632).Ive got it hooked up and the basic functions seem to be working - ie front doorbell and westminster chimes.However, as a kid, I seem to remember this thing also chiming on the hour and perhaps, single notes on the quarter hour, but it doesnt do that any more. Am I imagining things or has dad disabled this function somehow?I do see two screws on the extreme upper-right of the circuit board that have a jumper installed. Whats that for?Lastly, Id like to install a 2nd door bell in the basement (I work at home, in my office basement and cant hear the main bell all the time). Before installing the Rittenhouse, I just had two bells wired together in parallel, but when I tried to do this with the Rittenhouse, it just triggered the chimes. What is the terminal marked EXT FRONT for?Thanx....➡️ Reply Rittenhouse
Art - did you get a reply in answer to your post?I am about to restore the same door chime, you may have info that can help.ThanksFred...➡️ Reply Rittenhouse
Have you ever heard of a response on the Rittenhouse 631/632. I too am refurbishing one and need to know the correct tranformer voltage needed and a wiring diagram surely would help. Any insight?➡️ Reply Rittenhouse
The door chime is not working properly in that some of the hammers are not striking properly. sometimes they reach the tubes and sometimes not. They are all active but not as strong as they should be .I have turned down the adjuster and none strike and when turned up, it is as I have described . The strike eratically➡️ Reply Rittenhouse
Looking for a sequencer box for a model 552 doorbell chime. I know they are rare. Does somebody make a retro fit or do you have a good used one. If none of the above then how about schemetics and I will get one made. Thanks-Tom➡️ Reply Rittenhouse
need diagram for wiring of C8203. Only two reds, 2 whites, where would transformer lead be?➡️ Reply Rittenhouse
The installation manual has been misplaced and I am not sure which wires go to which connection. There is a red wire, a black wire, and a yellow with a green wire. The places to connect are for the front, rear, and transformer. Please advise. Also, there is a possibility that the transformer doesnt work. Is there a way to check that? Thanks.➡️ Reply Rittenhouse
Do you know where I can find the outdoor part you push to ring for this Emerson Model C8203? Thanks for your time.Eric Schneider➡️ Reply Rittenhouse
Emerson c8203 replacement transformer?Any help would be appreciated.Thanks, Bill➡️ Reply Rittenhouse
Purchased a use Rittenhous Westminster door chime / clock; Tetechron Motored, model #8633. I need a wiring diagram for this unit.Thank you,Virginia Melchi➡️ Reply Rittenhouse
I currently have this unit for sale on ebay. the wiring is simply two wires from the 16v transformer to the appropriate screw terminals on the printed circuit board and then the switch leg from each door bell button at the doors you are using attached to the corresponding terminal screw as labeled on the circuit board.➡️ Reply Rittenhouse
I hav a door chime and clock rittenhouse model 631 and 632 i need a wiring diagram for. any help i can get is appriciated thank you➡️ Reply Rittenhouse
Good day, I would need the wiring diagram for a Rittenhouse Clock Model 631/632. Just saved the clock from our old house before remodel and we want to install it back with a running clock and the chime.Thank youRadu 650-450-4806➡️ Reply Rittenhouse
My Rittenhouse door chimes top plunger does not work, the previous homeowner said when he was hooking it up, by accident the top soleniod was getting power all the time and over heated and it has not worked right since... can this be fixed ????➡️ Reply Rittenhouse
Push the outside button and the bell does not work. It has been in the house since it was build in 1988. Any suggestions?➡️ Reply Rittenhouse
I have an Emerson Door Bell C 8204 and it is not working. Need a response to this E- mail please.➡️ Reply Rittenhouse
My rittenhouse chime is about 15 years old and I would like to get it repair. I would like to know who can repairs it.➡️ Reply Rittenhouse
model c8550 8 note melody needs motor➡️ Reply Rittenhouse
Hello, I have a customer that brought in a door bell unit, the one of theplungers is bent inside. I do not know alot about these things, we work on electric motors. He want to know if he can still get parts for these unit.The model # is c8231. Please inform, I may just send him your way. Thanks for you help. Jeff.➡️ Reply Rittenhouse
I have a ritenhouse emerson door chime unit. It just started chimeing for no reason I had to disconnect it to silence it. Now when I hooked it back up nothing happens. Clock doesnt work, chimes dont work.Model 086331 4 tubed chime It also has a teledcrome syncronis motor. Any hope for it.Thank You,Dave Hovevar➡️ Reply Rittenhouse
Hi,Some one open the wires of my door bell Model C8550 (in the bell). Would you please give the wiring/connection diagram for this door bell so that I can re-connect the wire to operate my door bell.You co-operation & early response will be highly appreciated.Regards,Qaiser Baig➡️ Reply Rittenhouse
I need the wiring digram for model number c8535➡️ Reply Rittenhouse
Front door button will only ring one time. Side door button will only ring one time. Want front door to ring two times (ding-dong). Dont see how to wire it right.➡️ Reply Rittenhouse
A Rittenhouse model 312 came with my home. It works but the chimes are not loud enough to heard unless you are in the room where the doorbell is mounted.I would hate to replace it because other than this it is very workable.➡️ Reply Rittenhouse
rittenhouse model 410 not working need repair➡️ Reply Rittenhouse
Installed in 1987 when we built the house. Has begun sporadic multiple, single dings, all hours, day and night. I have replaced, back up battery and fuse in motor. Now makes a fairly loud buzzing sound also. Thoughts?➡️ Reply Rittenhouse
HelloIt came with the house had a ele.and he had no luck with repair➡️ Reply Rittenhouse
4 out of 10 times whenever I press the button it works.How do I know if the transformer that needs replacement or if the wiring itself that went wrong? I have replaced the button and it should not be the problem itself.How much would it cost if you send someone to fix it?Thanks.➡️ Reply Rittenhouse
I have an old Rittenhouse door chime that is missing its tubular bells. Home built in 1932. Chime cover has two decorative brass musical notes and a few horizontal brass what look like pinstripes. After researching, I believe its 30s vintage and original to the home. I would love it to be working, hopefully restored. Let me know what you need from me.➡️ Reply Rittenhouse
I can make new bells for this chime. See my sites: doorbellmuseum.org and electrachime.comBestRobert➡️ Reply Rittenhouse
I have a Rittenhouse Emerson Elec Model C8326 (perhaps 1960s) that has stopped working today. The chimes and housing seem okay, but the mechanism and bell button are old and worn out. Do you have replacement parts - and at what cost?➡️ Reply Rittenhouse
Bell is connected to two doors. The front door works fine. The rear door wont ring at all. Cant tell what might be disconnected. Any ideas would be a big help. Thanks.Ken Bentham➡️ Reply Rittenhouse
I have a Rittenhouse master model 550 and 551 doorbell to be tested and repair if needed.➡️ Reply Rittenhouse
I have a Rittenhouse 550, 551 doorbell chime.The unit itself works fine. What I am missing (which someone was supposed to nor trash) is the transformer that sequences the chimes. Do you have a transformer for this that will work? And if so, obviously, what would one cost?Thank you for taking the time to read this email.Regards,Paul Winchock➡️ Reply Rittenhouse
Tag on door chime unit says:Model 8846RVolt 16Rittenhouse Division Spartan ElectricFayetteville NC 28386The unit has four tubes, it has a circuit board with integrated circuits. The transformer is putting out 18.5 volts, although the unit says 16 volts on transformer and circuit board. I assume the board has gone bad. I like the unit, I am wondering if a replacement board is available or can you fix the current one. Another alternative I would like to explore, if another brand unit can be used.➡️ Reply Rittenhouse
Can you sell me Grommets for my Ritten house Model 236 soundbars?➡️ Reply Rittenhouse
I have a Rittenhouse 631/632 doorbell that works ok but the clock motor is noisy. Can I buy a replacement motor for it?➡️ Reply Rittenhouse
Can you repair the solo kids on this 1950s era doorbell?Its generally ok except that some of the parts that slide in the tubes to ring the chimes are lost. I could send it in or you could sell me the parts to fix it myself. Thanks,George Pond➡️ Reply Rittenhouse
I have Model 380 16V. I had connected it ot a Ring Video 2 Doorbell and it worked fine for several months. Now there is a loud humm coming from the chime. I think the Ring ihas a problem. Ring says the chime may not be compatible. Ring says the model 382 is compatible. Whould you know the difference between the 380 and the 382?➡️ Reply Rittenhouse
Front and back door bells. I need a diagram showing how to connect the wires from the doorbells. Front works with one wire from Front doorbell going to Terminal B and the other going to Front in the 16 VAC group. I assumed one wire would go from Back doorbell to Terminal A and the other to Back in the 16 VAC group, but the doorbell is not getting power.➡️ Reply Rittenhouse
I have a emerson rittenhouse rcm 4 main unit with IR6 speakers throughout a house i purchased and am interested in upgrading the entire system. Is there a replacement system where it can be changed out?It will be a few months before I am ready to do it, but am trying to look at options and replacement.➡️ Reply Rittenhouse
Do you have available a manuel for the emerson ritterhouse RCM-4 intercom. I have to re- install mine➡️ Reply Rittenhouse
my dilemma also. have you found a suitable replacement? thanks.➡️ Reply Rittenhouse
we have modle m7035 the door bell and gate buzzer in still workes but the talk butten and volumne dose not. would like to fix or replace unitplease help thank you➡️ Reply Rittenhouse
we have an old rittenhouse intercom system. the units look old but still works fairly well. need information on how to update system. were remodeling in some areas and would like to check out updating units. dont have specs on the system. not sure of specs but Name on the system is Rittenhouse Solid State am/fm radio intercom. It has a main station attached to 5 rooms and a front door intercom. I would like the update to include Pandora and a video front door intercom.➡️ Reply Rittenhouse
I have a rittenhouse am radio intercome that works well. It has 7 receivers + the base unit. can it be changed to fm ? I believe it is a late 60s mdel. thanks➡️ Reply Rittenhouse
Existing model was put in my home maybe late 60s, with ivory base unit and 4 ivory receivers plus brass door unit intercom. The radio reception is irregular, fades in and out and there is much static. Sometimes have to jiggle knobs on base unit to tune radio! Any suggestions on where to go for upgrade/ replacement and cost range? Thanks much.Mickey➡️ Reply Rittenhouse
I have my radio-intercom since 1969--In hasnt worked for about three years. I have two stations.➡️ Reply Rittenhouse
static, fade in and out radio. intercom doesnt work but dont care about that just want the fm on radio to work more consistently➡️ Reply Rittenhouse
Weve got an old aprox. 30years old unit. signal fades in and out. Best to try and repair or do you sell new/updated maybe with cd or mp3 imputs? Also need a external outdoor speaker/intercom box. Has the 5 plug cupling. thanks,Paul➡️ Reply Rittenhouse
very low sound no door chime➡️ Reply Rittenhouse
needs repaired tuning dial is broken.➡️ Reply Rittenhouse
Unit was installed late 1960s. Need speakers, knobs and covers to upgrade system.➡️ Reply Rittenhouse
I have an old Rittenhouse intercome unit, since I dont use it that much, I would like to replace the face of it with something newer, dont know if it;s possiable? please let me know how i can do this.➡️ Reply Rittenhouse
i would like to have an updated model the one i have was installed in 1977 it makes noise, drifts off stations all controls are noisey and sound is garbled. can you tell me where to get help.➡️ Reply Rittenhouse
I would like to know if spare components are still available? eg transistors and LM283T 5 pin audio amp or regulator? Or is there a replacement UNIT and what is the cost for a compatible unit.➡️ Reply Rittenhouse
I have a Rittenhouse / Emerson intercom system with individual stations for each room. Two of the intercom speakers nolonger work. When I opened them they have one red, one yellow and one black wire leading from the unit. Is it possible to get them worked on or replaced. They measure 8 3/4 long X 5 5/8 wide. If it is not possible to repair it, is it possible to replace the entire unite with one I installed at a job site that had a cd player in it? Thank You➡️ Reply Rittenhouse
I have a old intercom in an apartment building that has door locks, buzzer, and voice. the call and voice speaker does not work. all the other apartments are working good. Is there a replacement for the apartment units. or a upgrade?➡️ Reply Rittenhouse
Dear Sir: Im looking for a electric schamitic for an Emerson Rittenhouse intercom Model rm20/rm22. Any help in this matter would be appropriated. Thank You, JAY➡️ Reply Rittenhouse
I would like to see if I can get this to work. But I dont know where to start.➡️ Reply Rittenhouse
Need a schematic for the Emerson-Rittenhouse Model rm20/rm22. Need to know transistor replacement numbers for the front end tuner.Thanks,Don➡️ Reply Rittenhouse
I have gone through the trouble shooting I have 16 volts to the main unit just nothing coming out of main unit. like its acting as if there is no voltage. will not power up, no intercom, no radio is it replacement time or can this be repaired relatively cheap?➡️ Reply Rittenhouse
I have a radio intercom unit that needs to be updated.➡️ Reply Rittenhouse
We have the same system in our home. Did you find any compatible system? Did you replace your system? If so, what system did you use? Thank you. We need to replace everything except the wiring.➡️ Reply Rittenhouse
My sister inlaw gave me this doorbell clock, I do not have the chimes the model number is RC6333. Can you help.➡️ Reply Rittenhouse
Is there someone in Honolulu, HI whom I can contact to test and repair my intercom, and replace my ON/Off switch @ the MASTER SPEAKER?We have enjoyed our unit for many years, since 1968.➡️ Reply Rittenhouse
Please provide information needed to ship my unit to you for repair estimateand possible repair.I am assuming you need only the radio(master unit).Thank you!➡️ Reply Rittenhouse
I purchased a home in Honeoye Falls, NY. It has an RCM 3 intercom that works and I would like to get a manual for it. Is it possible to get instructions for it?➡️ Reply Rittenhouse
I need my rcm 4 repaired or replaced➡️ Reply Rittenhouse
EVERYTHING WORKS FIND..JUST WANT TO UPDATE OLD UNIT➡️ Reply Rittenhouse
Need new springs for the hammers. This is an old door bell and it has lasted about 40 years. The new ones are sick. This is the best I have heard and would like to keep it another 40 years.➡️ Reply Rittenhouse
I have a Rittenhouse intercom system and am unsure of the model #. It was installed in the 70s. I am painting my condo and would like to replace the ivory cover with a white cover. How would I go about purchasing just a cover? Thank you➡️ Reply Rittenhouse
I h ave a rittenhouse intercom system that does not work star system 9000 I would love to get it to work again. Can you help me with this thankyou glen➡️ Reply Rittenhouse
Ihave a 20 year old rittenhouse intercon that does not and love to get it working again or replaced can you help➡️ Reply Rittenhouse
I am a property manager who manages a townhome with a broken Rittenhouse intercome system. The speakers on the exterior are installed in the brick so to remove them is a huge project. The main console in the kitchen is what I am looking to repair or replace. The model number is: (looks like) M7034. The serial number looks like 202 1-9864-9989. Please feel free to call me at 630-879-3680 as I am working on a very short time frame. Thank you for your time in this matter!M. Berrt➡️ Reply Rittenhouse
I have a Rittenhouse intercom system that was installed in the 60s that worked fine until recently. Everything still works fine except the main intercom/control unit. Is there a replacement unit I can buy that I can use with all my existing speakers, etc throughout the house? Even a unit that only played music would be OK with me.➡️ Reply Rittenhouse
Looking to replace the outside door bell speaker Mod. No.M9305➡️ Reply Rittenhouse
Rittenhouse Solid State AM/FM radio intercom system for house and outdoors➡️ Reply Rittenhouse
I have just recently purchased a house that has a Rittenhouse Model 7300 Intercom system that does not work. I am trying to find a schematic for it. I know that it is an old system, but would like to use it to monitor my young children. Any help would be appreciated.Thank you.Eric Hoffman➡️ Reply Rittenhouse
Are there any Emerson Rittenhouse intercom main stations from the mid-sixties available?➡️ Reply Rittenhouse
Hello, I have a rittenhouse door sentry. #M9035 w/ a M 9305 door station. The indoor station seems to work, it unlocks the door when the button is pushed. The M9305 out side station is my problem, the speaker is fried and the button is missing. Would you have these items? or where I might find them.➡️ Reply Rittenhouse
we have an old set of chimes which were taken from our hallway after a fire, now they require repair, model number is not visible, however, it is a four long pole, with 4 or 8 note feature.would love to repair this➡️ Reply Rittenhouse
I purchased this residential unit in 1986. It is now giving a significant hum and does not produce all of its chimes.Does this give you a clue as to repairability?➡️ Reply Rittenhouse
I have a Rittenhouse Chine door bell with four long poles. The model number is c8578-1, The unit will not work, I noticed two bad diodes, and removed them I am having problems locating the right ones. Is this something you can fix?➡️ Reply Rittenhouse
it will not turn off a red light stays on. do i need to replace or repair it.➡️ Reply Rittenhouse
I am looking for a copy of Rittenhouse rm5 house intercom owners manual.➡️ Reply Rittenhouse
Do you have a rittenhouse rm5 manual?➡️ Reply Rittenhouse
I have the above model doorbell and really like the sound vs. the new electronic sound doorbells. Problem is the mechanism inside the doorbell (the part with the two knockers that the wires attach that hit the bells to make the sound) no longer works. Can I still get this part replaced and if so, how much and where?Thanks➡️ Reply Rittenhouse
I believe it was 16v AC current . not DC at least thats how mine is.➡️ Reply Rittenhouse
Dear Sirs, I have a Model RM-2.It was put in when the house was built in 1966.It does not work.Thank you for your help.➡️ Reply Rittenhouse
Buying a condo with an inoperative Rittenhouse Model 7021 intercom system. Was constructed in late 70s. Is the technology so out of date that it is not worth restoring? Should I consider restoring the unit, about how much am I looking at? Is there a dealer here in AR, or do I have to ship it to you in North Carolina? Hope to hear from you soon.Doug WoodH501-225-3139C501-831-1157➡️ Reply Rittenhouse
I have an inoperative Rittenhouse Model 7021 intercom system as well. Can I fix it or do I have to buy new?➡️ Reply Rittenhouse
I have an old rittenhouse 7021 (I think) it is from 1978. It needs a new from cover and the dial to change the stations doesnt work. Otherwise it works. Can it be fixed and about how much?➡️ Reply Rittenhouse
HAD LIGHTNING STRIKE AND WOULD LIKE TO REPLACE IF YOU HAVE A RETRO UNIT TO REPLACE IT THANK YOU➡️ Reply Rittenhouse
I am looking for a replacement unit or one that is compatable and larger to cover existing hole. please respond even if you are not interested or cant get what I need so I can try elsewere.➡️ Reply Rittenhouse
Would like to know if there is a replacement for this unit or where I can find a replacement knob for the Talk Listen stalk.➡️ Reply Rittenhouse
i have a model 7035 that was removed from the wall to repair the wall. Now I need to reconnect - but dont know how the wires go together. Are there any instructions available?➡️ Reply Rittenhouse
A friend of mine has a doorbell that i am hoping to repair and would like to find the wiring diagram for it if possible. The only tag I can find on it saysArtolier Lighting & Sound Div. Emerson Electric Co. Rittenhouse Operations Honeoye Falls NY 14472 Model RC203 or RC208 Volt 10 There are three terminals on the front labeled as Rear, trans, front I am hoping someone out there has a schematic Thank You Jim➡️ Reply Rittenhouse
Need a wiring diagram to an intercom with a doorbell.Artolier Lighting & Sound Div.Rittenhouse OperationsHonoye, NYmodel: M7034serial: (stamped) 202 (hand written) 0 2234-1748The intercom is powered by a 16 volt transformer on a closet wall. The standard 2-tone doorbell is in the hall. The base unit is in the kitchen. The remote intercom at the front door. The button on the door unit rings the doorbell and is a hands-free unit to talk to the base unit.Oh yeah, there is also a door release button scabbed in to the base unit. and extra wires coming from the door unit to the door frame (but no door release mechanism.Any ideas on schematics for something like this???Thx, Gary➡️ Reply Rittenhouse
I have a circa 1977 Artolier Lighting and Sound door Chimes / door bell / wall clock that HUMMS all the time. MODEL # C8633Can it be repaired?➡️ Reply Rittenhouse
I have a circa 1977 Artolier Lighting and Sound door Chimes / door bell / wall clock that HUMMS all the time. MODEL # C8633Can it be repaired?➡️ Reply Rittenhouse
Label states Emerson Model S7671Rittenhouse DivisionArtolier lighting & soundEmerson Electric CoHoneoye Falls, New York 14472Second Label statesFire Alarm DeviceSingle and/or Multiple stationHome built in early 70s and have not found any information per this model and/ or type of device. If you have info please respond.➡️ Reply Rittenhouse
The small piston that strikes the chime does not return back to the original position. There is a spring on the piston. It seems like the piston should have a retainer of some sort on the end to hold the spring in place. Is there supposed to be a retainer on the end of the piston to keep the spring in place?➡️ Reply Rittenhouse
Do you know of anyone in Central or East Central Ohio who can repair a Rittenhouse electric door chime? It has four, short brass tubes and chimes like The Westminister chimes. Thank you.➡️ Reply Rittenhouse
Hello, I am living in the house I grew up in and all of a sudden I noticed thatthe front doorbell was not working. The side doorbell hasnt worked for a long time. I have done some research so I will give you the information I have.Nutone Chime Signal, made in USA 1952, Model K 26 902 or 002It is also called Rittenhouse/ Nutone Accordianl. I seen a picture of it.I cant get the doorbell to ring . I love the doorbell, I hope you can help me.thanks.Debbie➡️ Reply Rittenhouse
I have a Artolier Lighting & Sound Div - Emerson Electric Co / Rittenhouse Operations Honeoye Falls, NY 14473 Model C8577 - 16 Volts. Do not know how to wire. It was working when it was taken from another home.This home is set up with one front door bell - ding dong doorbell on 1st floor and the Rittenhouse on the 2nd floor / 4 chime. All 2 wire. How do I wire? Do you have a wiring diagram. Note: The transformer, first floor door chime and front door bell is working.➡️ Reply Rittenhouse
Need to replace existing bell system with new Paul gilbert➡️ Reply Rittenhouse
Have model C 8203, 10 volt door bell. Am missing the push button remote that fastens to wall outside the front door. Any suggestions?➡️ Reply Rittenhouse
HAVE --MODEL DS-2 DOOR SENTRY SAYS NOT TO CONNECT TO POWER SOURCE OTHER THAN STANDARD 16 VOLT CHIME TRANSFORMERNEED TESTING OF ITS TRANSFORMER.I THINK ITS THE TRANSFORMER!WHAT IS PROCESS TO FOLLOW FOR THIS?ANDREW h=773-589-0150 c=773-899-0423➡️ Reply Rittenhouse
I need to have a bulb replacement performed on a 1980ties vintage bronze doorbell. The spring works fine but light nolonger stays on.Regards, Don➡️ Reply Rittenhouse
wonder if I can acquire 1of the 3 boxes that throws the donger to. ring the far right chime of 3➡️ Reply Rittenhouse
i need a part model c8633 volts 16 need the main eletric gear➡️ Reply Rittenhouse
I recently purchased an older home that has a Model # RC-475 - 16 volt door chime that works fine, but lacks the cover. Is it possible to purchase just a cover from you or is something like this no longer available. Amazon has one but the mfg. dimensions wouldnt fit. As close as I can measure where the unit is installed on the wall are approx. 6 1/2 in.x 8 1/2 x 2. Can you help, or perhaps give me some info. as to where I might be able to find one.Thanks for any help. Have a good day.Kathy Grant➡️ Reply Rittenhouse
4 Chime Doorbell With Clock .I Need Instriution Manual and wiring DiagramArtolier Lighting & Sound Div. Emerson Electric Co. Rittenhouse Operations Honeoye Falls NY 14472 Model C8633➡️ Reply Rittenhouse
Hello, I purchased my 4 note-8 note melody door chime in 1995. It has been set up on a battery operation operation➡️ Reply Rittenhouse
Could you please direct me as to where I may be able to obtain a circuit diagram for a rittenhouse installed in the 1980?Many thanksJoe➡️ Reply Rittenhouse
I have a schematic for Models M7010, M7011, M7012, M7020. The document also has AM Alignment, FM Alignment, Troubleshooting chart, and list of replacement parts for printed circuit board.➡️ Reply Rittenhouse
where can i find a schematic for a rittenhouse rm-20/22 intercom am fm radio➡️ Reply Rittenhouse
We have an older intercom system M9325 stations, M9318, and M9322. We are wondering if there is anything we can do to reduce the standing hum.Thanks➡️ Reply Rittenhouse
some ONE TOOK MY 577 Apart, I need a picture of how the Chimes goback on the unitTHANKS➡️ Reply Rittenhouse
We have a drive that is causing us issues and want to know if you repair boards for a 10 HP Relcon Inc Dynamatic AFR-7000 series drive. Or if you know of a company that repairs this style of boards. Model # AFR-7015, some of the part numbers for the boards are 15-565-16,15-646-106R, 15-565-9 & 10.➡️ Reply Relcon
The MMI for our Ruston Gas turbine control system has failed. We are unable to obtain a new MMI from the manufacturer (NEC NL10276AC24-01). We wish to enquire if you can repair this MMI and load the software. We have the neccessary software. including the intelligent display software Rustronic MKII software and Rustronic utilities software.Is there a procedure to load the software?➡️ Reply Rustronic
Dear Sirswe are looking for a company which able to change the Rustronic PLC parameters, can you offer us your expert to come to Germany.Best regardsTUBAFrank Kramer➡️ Reply Rustronic
We are using turbine TB-5000. Now speed is panel control. I wish control speed by analog input. May I have the program of this method?➡️ Reply Rustronic
I did a loading to PPM1 slot0 and PPM1 in slot1 but the LEDs on PPM1 slot1 are still on.Whats the problem?I did loading using VT100 terminal.➡️ Reply Rustronic
Dear sir with referencve to our organization we have installed Rustronic MKII software RP2 for EGT turbine (European Gas Turbine ) this system generate a message around 4000 for troubleshotting so if i want to know all the message how its create through varuious types of input /output comming from field device from the software ..can u send the document if i give the all details or can u send one person for servicing or checking of all interlock and all those thing so kindly revert back to me on same mailalso send u required all details from our organization mine:- contact details :- hpchavda@rediffmail.com,hpchavda2003@yahoo.comreagrds thanks Hraesh P Chavda Alembic Limited Baroda Gujarat India➡️ Reply Rustronic
Need Control Logic (Digital and Analog) of Rustronic MKII➡️ Reply Rustronic
Dear Sirwe need a copy of PLC and monitoring program for SGT-100-2s (Typhoon) MK II ; star fuel valve. we will be highly appriciate if you quote us the above software.best regards➡️ Reply Rustronic
My mom and dad has an old (approx.37yrs) rittenhouse intercom system and they need a replacement bulb for the main unit. Ive tried searchingonline but since mom nor dad know the exact part # im having no luck.Dad said it was a low wattage pilot lamp?? GE19 or R19???? Any help you can offer would be appreciated.Sincerely,Susan➡️ Reply Rittenhouse
Hi We stock this lamp in Sweden Price is 2 $ each + shipping (mail)JENSwww.JENSIgame.comJens@jensigame.com➡️ Reply Rittenhouse
We have RETA Electronic control units for DC motors type 222/22, 223/23. We are trying to find the place where somebody can adjust and repair them. Is there any place in the Czech republic or Europe you can recommend? Thank you in advance for your reply.With best regards,Alena Sukova➡️ Reply Reta Electronic
WE ARE PROCABLES S.A. AN INDUSTRIAL CABLE MANUFACTURING COMPANY IN BOGOTA, COLOMBIA.WE HAVE SOME DRIVES D5200 AND WE NEED MANUALS OR PLANS FOR RETA ELECTRONIC D52 SIEGBURG BV 70/2-80-1K.Nr. 847006YUOR HELP IS TRULY APPRECIATED➡️ Reply Reta Electronic
INSTALLATION AND WIRING DIAGRAM FOR DRIVERETA TYPE, 5200 RANGE SER NO S.1.531-12-10-2URGENTLY REQUIRED➡️ Reply Reta Electronic
Please help us if posible with a manual on Reta Electronic BW 522/06We is not certain on what the problems is.Best regardsIngolf ChristiansenFax: ++4546482868➡️ Reply Reta Electronic
You could realy held me very much, if you can send me some Informationes, Manuals, Plans, ... from a RETA ELECTRONICS Converter BV 532/45-13-02.Thank youEidher➡️ Reply Reta Electronic
Hello i need the Manual of reta electronic d52 siegburg➡️ Reply Reta Electronic
hi. i need datasheets or manuale or wiring for reta electronics drive type BV532/45-13-02➡️ Reply Reta Electronic
Hello i need the Manual of reta electronic d52 siegburg➡️ Reply Reta Electronic
reta electronic 5200 siegburg manual pdf➡️ Reply Reta Electronic
Im new here, just wanted to say hello and introduce myself.➡️ Reply Reta Electronic
Hallo!I´m from austria and i would realy need a manual or some plans for this typ! I hope you can help me!kind regardsEidher Timotheus➡️ Reply Reta Electronic
Model 5200 DC Drive we need a user manual➡️ Reply Reta Electronic
Hello, My company is BAYCAN Chewing Gum and Food Ind. and we are a member of Turkeys one of the biggest group ULKER. In our chewing gum wrapping machines ( Rose Theegarten ) your inverter D 52 is used and I need its user manual to see the functions of the adjustment screws. so could you send me this user manual please ?➡️ Reply Reta Electronic
i need user manual➡️ Reply Reta Electronic
we need catalogue and drawing about dancer cotrol type:reta electronic 5200 sigburg bv 70/5-39tank you for help us.➡️ Reply Reta Electronic
I too am looking for a manual to connect and set a D5200 DC drive that I have just recieved in equipment that I must recommission.Did you recieve any information that could help me to connect and operate the drive? I would appreciate a copy if you have a connection manual.➡️ Reply Reta Electronic
Dear Sir,Please qoute for the following item Electronic PCB of DC Motor Drive.TYPE: 531-21CARD: BV 7072-86QTY: 02At yr earliest.Best Regards,(ENGR: MUHAMMMAD SHAFAAT)DY. GENERAL MANAGER (WEM)PAKISTAN INTERNATIONAL AIRLINESKARACHI PAKISTANTEL: 92-21-99045159➡️ Reply Reta Electronic
We need a manual for setup and fault related drawings on this drive➡️ Reply Reta Electronic
sir,i have so many reta electronic drive different type. i need manual of drive type 531-22. of reta electronic. you are requested to send the manual in pdf or word format of my email.regards,chiranjib beraasst managerphoenix coveyor belts india lts➡️ Reply Reta Electronic
i need dc drive manual➡️ Reply Reta Electronic
i need manual of drive type 531-22. of reta electronic. you are requested to send the manual in pdf or word format of my email.regards,maxim from tmax electronic engineering ltd➡️ Reply Reta Electronic
dear sir,please send me the dc drive manual for the type-531-22. we are based at south africa johannesburg.we are very big in recycling➡️ Reply Reta Electronic
HELLO I HAVE A DRIVE D52 SIEBURG BV532/25-13.2BUT I NEED INFORMATION ABOUT MOUNTING AND PROGRAMMATIONCOULD YOU PLEASE TRANFERT THE MANUAL OF MOUNTING AND PROGRAMMATIONTHANK YOU FOR YOU HELP➡️ Reply Reta Electronic
please send me a manual please.➡️ Reply Reta Electronic
please send to me BV 531/200L-21-02➡️ Reply Reta Electronic
HelloWe need please manual for RETA 531 - 23 in French or English thanks for helpBest regards➡️ Reply Reta Electronic
Dear Sir, I need your enormous help my employer acquired a milling machine and using reta BV 522/28-17-2b converter and we dont have a diagram for plan S.1.522-17-1➡️ Reply Reta Electronic
I want to ask you if you have an electronic diagram for ROTAPRINT 37 KGM SERIE 3-64165, YEAR 1987 Thank you General ManagerDragos Acsente➡️ Reply Rotaprint
Dear Sir,We are leading manufacturer of Printing and Allied Equipment in India with installations over 6750 in 40 countries.We manufacturer Pack to Pack 2 colour offset with fully pneumatic and servo controlled tractor feeding to enable printing any form length between 7 to 13 without the need of changing cylinders. We have installed more than 500 machines of this model worldwide. Please visit our website www.autoprint.in and see our pack to pack video in the video clips section. Also you can find the video for download at www.autoprint.co.in/downloads/ptp.mpg. If you wish to replace your old Rotaprint equipment or wish to add our new pack to pack equipment please contact us. We can provide you excellent after sales support through our international network of manufacturers/dealers/agents and our own service team.with regards SRamaswamymobile 0091 98434 17875ramasamy.s@autoprint.co.in➡️ Reply Rotaprint
ask you I need elektronic scheme for Rotaprint R35KfastThank➡️ Reply Rotaprint
Frankfurt, Nov. 06-2006 Dear Marty A. Lineberry,please give us the shippingdetails for our repair order. Model Number:SII1240-200 P/N:25581687. Please give information, because it is very urgent.➡️ Reply Rondo Electronics
We have a Reutlinger Compu-balance. Do you repair this equipment? Also do you know where we could get a copy of the operation manual?Best regards,Mike Jones➡️ Reply Reutlinger
We have a Reutlinger Compu-balance.Its code is 701.00.030 and yts probe coded with 770.00.055 is broken. can you help or repair this equipment for us? We will wait your reply. Thanks and Best regards,Ercan Ozercan➡️ Reply Reutlinger
Dear Sir,We are using turbine TB5000 to drive water pump.I want to force the supply valve (SOL-11)and vent valve( SOL-12). But I can not force them by command CHG SOL11,1. When I type this command, the LED on card is on in short time. There is no signal at terminal. What Module must I choose? Why not I_O Module?I also want to control speed by analog input, may I use the PID control?I hope receive your reply soon. Thank you!Best Regards.Do Trong Nghia➡️ Reply Rustronic
Please find below the complete part numbers for the Rustronic vibration modules I required for the Gas Turbine. Module 4509 Part no. : 4509/20 64/07004230/20 950279/1/2 (SR6113/06) (SR6129/06) Module 4502 Part no. : 4502/30 64/07004230/30 950279/1/5 (SR6127/03) (SR6113/23) Module 4504 Part no. : 4504/42 64/07004230/42 950279/1/6 (SR6123/03) Module 4510 Part NO.: 4510/27 64/07004230/27 50279/2/7 (SR6131/02) (SR5946/05) I hope this helps. Please forward me an official quote.Please forward me your e-mail, so I can send you photos of these cards. Kind regards Dilip HutheramE&I Superintendent Newcastle Co-GenerationCell: 083 631 9693Tel: 034 3284488Fax: 034 3284489Email: dilip.hutheram@newcogen.co.za➡️ Reply Rustronic
Hi Please could you quote me price and delivery on a Rustronic 4509 vibration card.Kind rgeardsSimon Jackson➡️ Reply Rustronic
I have tried to program this pcb for my washing machine, but it keeps coming up with E90 when I turn the machine on, as if it isnt programmed. But when I check the program adresses, the data is correct. I have noticed that the software ver. is W2C01551, is there perhaps an other thing that I need to do? other than pressing the two top buttons for saving the data?Best regardsTorben➡️ Reply Rustronic
Hello! Ive got problem with my washing mashine. Thats alert E90 about 15 seconds after I pushed the start button och nothing else is happend. DATA:Precond elettronica type 451516811Type E.Z Assembly: 132191552Type E.Z Board:124307062SW Ver.:UDA30202T70 WK:52/05 Op:4410➡️ Reply Rustronic
Bonjour, Monsieur;Afin de me permettre de lire les modules du software, et de bien comprendre le fonctionnement des turbines installees a notre site Sonatrach, jai besoin de menvoyer un document qui explique les instructions utilisees dans des modules par exemple ( /DEF: MODULE:TURBINE_GAS_FUEL; PROT:2; GLOBAL:DISTAG; GLOBAL:DISSTRING; GLOBAL:LOAD_STRINGS; GLOBAL:STRINGS_LOADED;//DEF: TASK:INI(3); ID:DEFAULT_TSK_ID; PER:1; ACT:MESSLOAD; REQ:SYMINIT; LET:NOTANN=1;//GOSUB:TSK_STOP; DEACT:MONITOR;/et merci monsieur;➡️ Reply Rustronic
We have few unit cards CT91002/2 need to repair.Pls estimed cost repair and delivery.Few CT91002 components burnt➡️ Reply Rustronic
I need a new spring that holds the dryer onto the stand, actually Two springs for I have another dryer, same problem, Old dryers but still work. Speedy Dryer ser.8565 Model 100 Do you have such an Idem? Thanks Judy➡️ Reply Rapid Electric
looking to repair a speedy dryer volts 110,120 ac, 60 hz➡️ Reply Rapid Electric
I need a switch cover and new wheels for my Speedy Dryer. Can you help?➡️ Reply Rapid Electric
I need the plastic attachment on the end of the blower hose for a Speedy Dryer 110 volt model 900 serial number 30449188. Can you help?➡️ Reply Rapid Electric
Manual for 5200 range needed URGENTLY PLEASE.Serial no S.1.531-12-10-2➡️ Reply Reta Electronic
Hello, One of our employees has a Reliance 705330-28s that stopped working, and they need a replacement. We are looking for repair information or guidance on where to find a replacement. Is this something your shop can assist with? Thank you.➡️ Reply Reliance
Have a problem with operating system, here is the error that I am getting when trying to boot up system.Is there any way to get a copy of the master disk?Or is this a hardware problem, like mabey the mother board is goneBad or missing dos himem.sysError in config.sys line2Hma not available: loading dos lowBad or missing command interpreter enter correct name of command or interpreter (eg, c:command.com)➡️ Reply Robotool
It appears that your himem.sys file is corrupted or missing.config.sys line 2 error is probably calling for this file.Open the file with notepad.exe and see. (or boot up w DOS floppy. type: Edit config.sys or open config.sys)if so, simply copying the himem.sys from your DOS disk could fix the problem.himem accesses the extended RAM memory and loads DOS there. without it, DOS is loaded into the Base memory. (the original 640K of RAM. and the only true Working section of RAM.)legacy of the Original Sin: in the days of the original PC (XT) 8080 intelthat 640K was an almost infinite size of RAMsince most programs in DOS were 1k 3k 5k etc.(There are actually 3 sections of RAM (stupid microsoft) patches, patches.BASE RAMextended RAMexpanded RAMOR----simply copy himem.sys from DOS floppy to HD dir called for, if it works; then you know what it was. no need to verify by opening files, etc.but at least you know what is taking place. in the OSAl Castaneda➡️ Reply Robotool
I have a cvm-1 they offered a upgrade with a new pc paised system for $5,000.00 cookbook change up. Do you have such a system you offer? I didnt like the CPM disk drive and only 2-1/2 axis contouring.please fax,email, or calltom burgmeierlibety machine & tool7908 ontario avecicero ny 13039fax 315/699-0175call 315/699-3242➡️ Reply Robotool
Hello,Im in the purchasing department and need information on repairing a Reliance 1su21003 that has stopped working. Can you please provide details on the issue and if a replacement is available?Thank you.➡️ Reply Reliance
We purchased our present home in 1998. It was custom built in 1983 with many upgrades that were available at that time. Unfortunately since we have lived here the system does not work. The main unit is 17 wide and 9 tall. There are 12 units scattered throughout the house. They each measure 7.5 tall by 8 wide. I think what we have may be on the large size as far as the measurements of each room speaker and the main system as well. because of this we are afraid we are looking at a major renovation to replace it. New drywall and all that. Is there a possibility that it can be repaired or does Rittenhouse have a replacement that would fit? Please advise.Thank you,Marie Gunderman➡️ Reply Rittenhouse
We installed our Rittenhouse intercom system in 1978 when we built our new home. The speakers look out of date and would like a better main unit. We have 4 outside units, and 7 speakers.Can we purchase new units and still use the same wiring? Would appreciate a response ASAP. Thanks Jim MannP.S. Please do NOT give out my e-mail address to anyone else. Thanks➡️ Reply Rittenhouse
I am interested in buying your intercom, I had mine accidentally ripped out during remodelling and need a replacement , does yours work ok?Derek Rust➡️ Reply Rittenhouse
IM A ROOFING CONTRACTOR IN HOUSTON. WHILE WORKING ON A PROJECT WE BROKE SOME INTERCOM SPEAKER BOXES AND I RPLACE THEM. I WOULD LIKE TO IF SELL THESE INTERCOM SPEAKERS.➡️ Reply Rittenhouse
where can i find rittenhouse intercom/radio part??➡️ Reply Rittenhouse
Same as James Mann note - have 1970s Rittenhouse intercom---can we replace old system - can we purchase new units but use same wiring??➡️ Reply Rittenhouse
I have about a 1984 model, 16.5 inches by 9 inch am/fm intercom unit........unit does not work anymore. Cannot pick up radio stations by dialing the knob......do you have a replacement unit that would fit this spot? Or is it repairable?Lausanne➡️ Reply Rittenhouse
The system is old and has not worked when I bought this house. Wish can fine some one to fixe and test it.➡️ Reply Rittenhouse
Just wondering i have a rittenhouse system rcm-1 and the intercom system part does not seem to be working. We can broadcast for the main unit and it is heard in the other units but when we try to broadcast from one of the other units to the main you can not hear the person ? Anysuggestions or do you have a manual that can be downloaded?ThanksDave➡️ Reply Rittenhouse
Our house came with this intercom system. Very Old I suspect. Is there anyone who could furnish me with a copy of the ownuals manual-instructions? Paul➡️ Reply Rittenhouse
I have read several threads asking about updating an old Rittenhouse system. I would like to do the same, hopefully avoiding the need to replace drywall, etc., since this system is considerably larger than the Nutone products. I couldnt find any responses addressing whether or not there were solutions available. This system is working fine, it just looks silly with the updates we have made to the house. Thank you!➡️ Reply Rittenhouse
Jennifer Walker:Did you ever figure out what to do about replacing your Rittenhouse unit? Im in the same boat!Any ideas or products you have come across on your own would be appreciated➡️ Reply Rittenhouse
I AM A ELECTRICAL CONTRACTOR AND HAVE BEEN TOLD THAT NUTONE WILL WORK USING EXISTING WIRING THE PROBLEM IS NUTONE WILL NOT WARRANTY IF YOU DO NOT USE NUTONE WIRE, BUT THEY DO HAVE A 30 DAY RETURN POLICY TRY THE SYSTEM IF IT DOES NOT WORK TAKE IT BACK ASAP➡️ Reply Rittenhouse
My home was built in 1965 with the same Rittenhouse intercom/radio system that doesnt work anymore. I would like to upggrade with intercom/radio/ satellite radio system can you do the work? What would be the estimated cost?➡️ Reply Rittenhouse
our unit has power and the light comes on but nothing works. The electrician says it is not the transformer.➡️ Reply Rittenhouse
The Rittenhouse door intercom answering system system was installed in 1978. It is not functioning well. Do you have a newer replacement for it that would still have the doorbell and intercom system? Does a new unit come with the exterior speaker?➡️ Reply Rittenhouse
Have a Rittenhouse intercom system installed in 1956. There appears to be a dead short in the Master.Is there a NuTone Master AM/FM which will work with the satellite room units?➡️ Reply Rittenhouse
My Rittenhouse Master unit has failed. Is there a replacement unit I can purchase?➡️ Reply Rittenhouse
but want door bell to continue working. Can we get wiring schematics?➡️ Reply Rittenhouse
I recently moved into a house that has the Rittenhouse All Transistor RCM-1 system in every room. Its obvious this system has not worked in a few years, but I want to repair it and keep it with the time of the home. A newer system would take away from its appeal. Is there anyone in the Tulsa, OK area that could help me?Thank you,Candy Cicoria➡️ Reply Rittenhouse
Good Evening,We have a Rittenhouse Intercom System (solid state Am/FM Radio Intercome) it has got to be at least 30 years old. We are looking to replace the outside speaker box (Nu-tone). Please let us know if this item is still available. We would give you more info on the system, but cannot find serial number.Thank you in advance for your help with this problem.Jo Ann➡️ Reply Rittenhouse
I have 2 Rittenhouse intercom speakers that need to be replaced. They both measure 9 1/4 long. 6 1/4 wide and 3 1/2. Do yo have suitable replacements? If so, how much are they? Price of each unit, tax if aplicable and shipping charges for a total net price.Thanks in advance for your prompt reply.➡️ Reply Rittenhouse
Our house was built in 1978 and we purchased it in 1997. It had the Rittenhouse monitor system in place with the main unit in the kitchen and smaller units scattered thought the house and in an attached apartment. The unit has never worked since we have been here and I was wondering if it is repairable?➡️ Reply Rittenhouse
some unit owners intercom is not working, needs repair. Who can we call on this?➡️ Reply Rittenhouse
I have an older system, it was still working but when a water pipe broke behind my kitchen wall, it soaked the unit and ruined it. I want to know how much it would cost to have it replaced so I can get back the intercom and music function. Thank youAlbert Brien➡️ Reply Rittenhouse
intercom system does not work.would like to have it repaired.➡️ Reply Rittenhouse
new home to me. system not working. any help would be great. thanks➡️ Reply Rittenhouse
Hi, need repair to this unit, sound cuts in and out when volume control knob is turned/wiggled. Moving molex 5 pin connector on circuit board also causes power to cut in and out. Mode delector knob has become stiff to operate. Please send estimate if repair is possible, thanks➡️ Reply Rittenhouse
who repairs or work on the old Rittenhouse intercom systems.I would like to do an upgrade. Since I already have holes in the wall from the old Rittenhouse. I would like to upgrade to something along this same size.➡️ Reply Rittenhouse
I HAVE A RITTENHOUSE INTERCOM AM/FM SYSTEM , MODEL # 9042 AND I AM TRYING TO FIND OUT WHAT SIZEPOWER REQUIREMENT TRANSFORMER 4 WIRE I NEED. I DO NOT HAVE THE OLD ONE. ANY HELP WOULD BE APPRECIATED. THANKS➡️ Reply Rittenhouse
i need a wiring diagram for a roundo roll model pas420➡️ Reply Roundo
I want to ask you if you have an electronic diagram for ROTAPRINT R36 KVThank youGeneral ManagerBanceanu Vlad➡️ Reply Rotaprint
notes of how to repair all kind of t.v and vcd and dvd decks ERNEST NARTEY P.O.BOX 782 ASHAIMAN W/A GHANA 00233➡️ Reply Rotaprint
I have forwor about electronic diagram for ROTAPRINT R37 KV.➡️ Reply Rotaprint
i want rotaprint GBM diagram.it is very complicated machine about wiring.➡️ Reply Rotaprint
I have the above mentioned door chime (Rittenhouse door chime model C8536) that does not work correctly. There where some broken wires from the transformer coils that I soldered back on and now it does not work correctly. Do you have a schematic for this unit?➡️ Reply Rittenhouse
I have had this for almost 50 years and the clock does not work, for some unknown reason, and the chimes are weak sounding and miss at times. I need help. Can this be repaired?➡️ Reply Rittenhouse
I have an SCM card PN CT92475A/03 on a rustronic control system that is causing me trouble. The customer has a replacement card with P/N CT92475A/01 and I do not know what the differences are. Can you support?Customer is due to replace this sytem for a woodward micronet in the next four months.Regards.➡️ Reply Rustronic
Where can I get a service manual or schematic for this unit? Thanks for your help.➡️ Reply Rte Power/Mate
We need to know the price for buying a BPA-40G Power Supply and its publications.➡️ Reply Rte Power/Mate
Can I get a copy of the ES-24E supply schematic?➡️ Reply Rte Power/Mate
we bought this house with installed system. not working. power source not found.➡️ Reply Rittenhouse
I need a address to send this unit to get it repaired➡️ Reply Rittenhouse
Good daY!I just want to know the specifications for the Integrated control and Alarm card, FC series for Ratelco battery charger...and if its still available in the market?.We hope you could give us a little favor regarding this request..Than you so much!...➡️ Reply Ratelco
Advise P&D to repair Ratelco Model# 102B03504-00 battery charger➡️ Reply Ratelco
120vdc to 120vac 60hz 1.0kVAour bard is fried, need new one asap360-739-9777thom➡️ Reply Ratelco
We have an inverter drive that has the Rhurgetriebe name on it. The model # is Rofre 89710037. The touch pad has been damaged and needs repair. Is this something you can do?Thanks for any help,Mike SchwartzPowers Inc.➡️ Reply Ruhrgetriebe
Dear sir:Do you have repair RVSI LS-5700 inspection experience.I have one sensor head want to repairIf you can repair , please tell us. ThanksRegards,Smith➡️ Reply Rvsi
Dear Smith, We can do 1 - 1 exchange your old defective unit with a refurbished unit.Let us know.Thank youAlex LooGlobal Semicon Technology Pte LtdEmail : alexglobal@singnet.com.sgEmail : alexglobal63@yahoo.com.sgMobile : +65-9002-7838Tel/Fax : +65-6476-3568Skype: alex.loo63➡️ Reply Rvsi
We have a raulan-borg mcc110 system at our facility and i am looking for a manual for it, with wiring schematic. Can you help?➡️ Reply Rauland-Borg
need troubleshooting info on rittenhouse model m7900 amp ser# 3060-0074-2091. also, price and availability of parts as i am working on an intercom system in a 8 unit condo.➡️ Reply Rittenhouse
I am looking for the carbon contact blocks that mount at the end of the tongs on this soldering device. Please advise the price and availabilty. Thank you. Richard➡️ Reply Robinair
Hello, I recently purchased a Robinair Lectra-Torch, Model No. 14492, in what appears to be un-used condition. I have not tried to power it up yet. Would you be able to spare the time to let me know if this has any value? I will most likely list the item on ebay. Respectfully, Lou➡️ Reply Robinair
I require the carbon contact blocks that mounts on the soldering tongs of this soldering device. Please indicate how can I proceed to obtain at least three sets of each , your price, possible delivery date and form of payment.➡️ Reply Robinair
I HAVE AN OLD LWCTRA TORCH THAT HAS DONE A LOT OF WORK, BUT NOW THE TONGS HAVE COMPLETELY WORN OUT AND NEED TO BE REPLACED COMPLETE WITH CABLES. CAN YOU ADVICE ME ON HOW i CAN OBTAIN THE ITEM AND THE COST.THANK YOU.ALAN PILGRIM.➡️ Reply Robinair
I NEED A COMPLETE TONG, CABLE AND CARBIN SET TO REPLACE MY OLD WORN OUT TONG SET. PLEASE CAN ANYBODY HELP ME?➡️ Reply Robinair
I NEED A COMPLETE TONG, CABLE AND CARBIN SET TO REPLACE MY OLD WORN OUT TONG SET. PLEASE CAN ANYBODY HELP ME? MANY THANKS,ALAN.➡️ Reply Robinair
Im looking for a price quote for a new power switch for the lectra-torch 14492➡️ Reply Robinair
2nd request. I am looking for the carbon contact blocks that mount at the end of the tongs on the model 14492 soldering device. Please advise the price and availabilty. Thank you. Richard➡️ Reply Robinair
Remco 2153 controller not responding to input commands. Need assistance with repair.➡️ Reply Remco
I am looking to purchase or acquire an O&M manual for a Ratelco FF12012.➡️ Reply Ratelco
im looking for Ratelco manuals for model #102B-3608-00Atype FC48 1505Athanks for any help➡️ Reply Ratelco
thank you I have a ratelco rectifier battiery charger I have no model number nothing Im looking for a shop manual owners manual what ever is there a way mabe I could send you some pics of this and mabe you can help me out thank you➡️ Reply Ratelco
Could you possibly have a manual for this unit. Roseco Electronica 00A85?I am having trouble with it but cant varify if it is in the unit or the wiring to it. Best Regards: Joe Steward➡️ Reply Reseco Elettronica
I have two 5200 BV 532/650l-22-02 DC drives. I do not have a connection diagram for them and would like to recieve a manual or a simple diagram of the connectins, I am prepared to pay for them as the drives are valuable and I cannot use them presently. regards Barry Keech➡️ Reply Reta Electronic
Dear SirWe are request for Reta Electronic drive Type 531-20Pls send me a questions.Thank YouJayantha KumaraElectrical EngineerCentral Industries PLCNo:312, Nawala Road RajagiriyaSri Lanka Phone:+94-718799943➡️ Reply Reta Electronic
I have a reta laboo TSR 4Q85 drive, I would like to know if you can give me a qoutation on the new Dc drive of the same kind.➡️ Reply Reta Electronic
Dear Sir,I am looking for connection diagram or details of,RETA BV 70/2 - 84 DC DRIVECan you help me in this regard?Bst RgdsEkanayaka➡️ Reply Reta Electronic
manual for reta electronic 5200 conection electrical➡️ Reply Reta Electronic
We are looking for the Rittenhouse C8931R Wireless Chime Receiver.We are an electrical contractor and are working with a customer who loves her chime system but wants to expand it to other areas of her home.Can you point me in a direction to locate one of these?Thank you.➡️ Reply Rittenhouse
I have a Rittenhouse Model S7806 Smoke/Fire detector system in my 3-level condo. It was there when I moved in so there is no manual for it.My problem is, after a thunder and lightening storm the other day, I came home to find all 3 units ringing. The only way I could silence them was to switch off the circuit breaker. If I turn the breaker back on the alarms start sounding again. How do I reset them. There is no apparent reset button; nor can I find a master control box or module anywhere. Do they use them? They are connected to the ceiling box by 4 wires. Any help would be appreciated. Neil Berman➡️ Reply Rittenhouse
Model# S7808. The detector has been making loud clicks, usually two at a time. What does this mean? Replace it or cleaning. Please help very annoying.➡️ Reply Rittenhouse
I am looking for a remote button for this system.Would possibly trade a receiver unit as I have extra.➡️ Reply Rittenhouse
We are also electrical contractor company(Towers Electrical Serv. Inc)We are looking for a model C8931 R Chimer Receiver also a sender unit if possible.We cannot find any info on this item it was made ty Rittenhouse Fayettevilole, nc. 28302➡️ Reply Rittenhouse
Would you know where i can find a C8931R?➡️ Reply Rittenhouse
When you press our door bell button a chime is not coming out of the box in the outlet.➡️ Reply Rittenhouse
I am looking for a Rittenhouse Chime Receiver Model C8931R. Would you have one available for purchase or can you direct me to a person or another company that may have one available. Thank you!➡️ Reply Rittenhouse
7th chime does not work can plunger be lubed if so with what➡️ Reply Rittenhouse
I just replaced the control board on a RYTEC High Speed roll up door. Rytec doesnt offer a repair service for the board I removed and Im looking for that service.➡️ Reply Rytec
I have a TCP-101 Rytec roll-up door control unit that has a shorted power input. Can you give a ball-park estimate for repair? No rush, I have a spare. Sorry, but due to spammers my email is generic until I decide to work with you.➡️ Reply Rytec
we have here a rytec control board and search for somewhere to have it fixedthanks for the support.➡️ Reply Rytec
We just installed 3 Rytec Predadors with the Feig Encoders , 1 Door worked fine 2 do not have communications with the controler. Rytec support claims the wire is bad , we replaced the wire but left it at full lenght with no change , the door that works has the full lenght of cable thus making me believe there is something more that we are missing , by the way we also swapped encoders with brand new units , is there a problem that these units have that Rytec is not aware of or not willing to disclose.➡️ Reply Rytec
Model DG1200 Rytec Do you work on these?Can you estimate cost and turn around time?Thanks. You worked on an Atlas Copco controller ....still works !!➡️ Reply Rytec
We have two cable coiling machines with Rowan Ellronica systems and would like to obtain information on how to synchronise the linea and motor speeds.We do not have Model numbers-but can Email photos of the machines.Would you be able to assist us???regards➡️ Reply Rowan Elettronica
I would like to replace my working existing RMC-4 rittenhouse intercom with a compatible unit. While using the existing wires? Suggestions _ and would you be interested in the old unit and speakers - 8 + 1 doorThanks,➡️ Reply Rittenhouse
Need base station repaired. Would purchase old➡️ Reply Rittenhouse
The unit works, but possibly in need of some service. The AM radio works , but no FM. There is a bit of background noise in the system.➡️ Reply Rittenhouse
The unit works, but possibly in need of some service. The AM radio works , but no FM. There is a bit of background noise in the system.➡️ Reply Rittenhouse
I moved this door chime/clock when it was working from one home to another. The electrician that hooked it up did not do it correctly and I have no schematic for how it should be wired. I know it needs three wires but not sure on which of the 7 screws they get wired to. They do not indicate Com or Trans just numbered 1-7. Your help is much appreciated.Regards,Mary Anne➡️ Reply Rittenhouse
I have a Ritten House Model 620R that needs to be repaired. The chimes are off of it and I have the motor ?? and clock box just needs to be put back together. I would love to have this repaired for my husband. We came across this clock out of a rental house we own and very sadley our renters damaged it. It at one time was on the wall and still working. My husband was so upset. Could you please help and give me a price on getting it repaired.➡️ Reply Rittenhouse
Hello! Do you have any parts for Rittenhouse (Emerson) All Transistor Radio-Intercom System, Model RM-1 (AM radio) or RM-2 (AM/FM radio)? Our system dates from the 1960s--still going strong. But I need knobs and especially the instruction manual because I dont know how to answer and use the exterior Door station (or for visitors to talk to me). Maybe a manual for another vintage Rittenhouse model would have useful instructions? Any help would be appreciated. Thanks, Diane Reichard in Princeton, NJ dpreichard@att.net➡️ Reply Rittenhouse
I am searching for a User Manual for the Rittenhouse M9041 AM/FM Radio-Intercom system. The unit is original to the house built in 1982. I have found a tech manual with schematics but now need to locate a User Manual. Any suggestions would be appreciated. Thanks.➡️ Reply Rittenhouse
Can I use the existing wiring and recessed wall areas of the old system listed above with a new replacement system. If so, what new updated system will work? Thanks➡️ Reply Rittenhouse
I have a RM-2 or a M9401 rittnhouse intercom I need a manual or schematic.any ideas where to locate.Don➡️ Reply Rittenhouse
I have a Ritten House RM-2 Radio Intercom in original box with original instruction booklet AND an OR-11 Outdoor Remote Station I am looking to sell.If you or someone you know would be interested, please contact me.➡️ Reply Rittenhouse
I get typically one of three chimes to sound when the doorbell is rung, occassionally 2 followed by a buzzing sound. Some of the wires were loose and I tightened them, but still dont get all the tones. Any ideas on what to do to get all three chimes to ring?➡️ Reply Rittenhouse
Jessica:I have the same model door chime, with the same problem. How did u make out with yours? Do you know any of the history of this chime. From what I can surmise, it was produced after WW2 and that would fit as it was in my parents house when i was born in 1954. I have a friend that is an electrical wizard, hoping he can help out. Id be interested in any info you have on yours.➡️ Reply Rittenhouse
Please quote two pairs, each, of Electra-Torch carbon tips ,Part No 14492-50. Please indicate were you will deliver, posible delivery date, and form of payment.Please answer ASAP. Thanks G.Soliz➡️ Reply Robinair
Do you sell parts? I am looking for a replacement potentiometer for an Emerson-Rittenhouse RC 633. It is labeled Clarostat 140-6747/ 135-51.➡️ Reply Rittenhouse
Looking for instruction for the door chime opporation.➡️ Reply Rittenhouse
Can you repair station cards from Rauland intercomsystems? Part #TC2113??RH➡️ Reply Rauland-Borg
Have two chargers type FC24754 Model 102B-3602-03 Ser# 8741252My Batt Charger # 1 has been charging a lead acid bank for the past 4 years. AMG 8A8DLTP 245amphr (12vdc x 4 battery) and the AC fail light has been on as I am told for years. Batterys have gone bad and going to replace them. Question at hand is is this alarm affect any function of the charging system at all? How can I correct it. Charger #2 is pushing a Ni-cad bank and seems to be doing ok.➡️ Reply Ratelco
Reliance 120245 not powering on, no display or response. Need immediate repair service, please contact ASAP.➡️ Reply Reliance
Do you have a service breakdown drawing for the SOR6 control box also the P/N and P&A for the supply boardRegardsNeil➡️ Reply Reo Elektronik
Hey there, Ive been tasked with looking into an issue with a Rittenhouse C8578-1 135-7351-01 door chime. I dont usually work on hardware like this, so I could really use some guidance on how to fix or replace it. Any help or advice you can provide would be greatly appreciated. Thanks in advance!➡️ Reply Rittenhouse
Rowan Elettronica 280/93 3-phase drive not responding to input commands. Need immediate repair assistance to get production back on track.➡️ Reply Rowan Elettronica
please send me complete wiring diagram / wiring scheme of Rotaprint ttr2 printing machine by email.thank you!➡️ Reply Rotaprint
Please send me complete diagram and scheme elektrical of rotaprint 35 ofset machine by mail.thank you➡️ Reply Rotaprint
please send me complete wiring diagram / wiring scheme of Rotaprint Rotogatte 24 printing machine by email.thank you!➡️ Reply Rotaprint
Having issues with my Rittenhouse RCM-4 intercom with radio - the radio feature is not working. Need repair assistance➡️ Reply Rittenhouse
Hello Im a mechanic for Watson Pharaceuticals in Copiague long Island. I have 2 -REOVIB MFS268 Frequency Controllers that are in need of repair. I was wondering if its possible for you to email me a quote on refurbishing these units!! Thank You!! Jimmy.PS Do you take credit cardseither ways no problem.➡️ Reply Reo Elektronik
HiI have the above chime box and wish to re assemble it. I took it down for decorating purposes.There is a black/dark blue wire, a yellow wire and a red wire. There is trans, front and rear. My question is what wire goes with what?Many thanks Michael Donnelly➡️ Reply Rittenhouse
need to reconnect wires to front, rear & trans positions.➡️ Reply Rittenhouse
Dear Sir,We do have one REO thyristor controller needs to repair.Can we first send you the damaged photo for the reference?Please kind to provide the e-mail address.Thanks.BR,Benson➡️ Reply Reo Elektronik
Hello,I have a thyristor drive BV 522/10 but dont have manualls so dont no whatpotmeter can conectid and the power of taho.If you can help me send e-mail.Thanks and best regards Bela➡️ Reply Reta Electronic
WE HAVE A RETA BV 524/28-15-2 DC DRIVE WITH OPTIONAL PRESET SPEED INTEGRATOR. WE NEED TO MAKE SOME ADJUSTMENTS TO THE DRIVE BUT DO NOT HAVE A USERS MANUAL, SO DO NOT KNOW WHAT POTS TO ADJUST. ALL DRIVE PCB MARKINGS ARE IN GERMAN.CAN ANYONE HELP?ANY ASSISTANCE WILL BE GREATLY APPRECIATED.REGARDSKEITH DICKINSONELECTRONICS TECH.➡️ Reply Reta Electronic
Is there a new updated unit (with new bells & whistles) that can use the existing wiring and wall recesses of the old units. If so, where can I get them and what would be a ballpark pricing? Thanks➡️ Reply Rittenhouse
Machine not powering on. Power light indicator is not lit.➡️ Reply Reliance
The Rexroth Hydraulics MDC1-16 controller is displaying error code 3E-05 and is not responding to input commands. Urgently looking for a technician with expertise in troubleshooting and repairing industrial control units.➡️ Reply Rexroth Hydraulics
I THINK I NEED A TRANSFORMER CLOCK WLL NOT RUN TX IN ADVANCE gUY➡️ Reply Rittenhouse
I have a Ritten House Master Model 631 & 632 in my shop for repair. I would like to obtain a service manual for this item. Please advise if this is available. The clock is in bad shape as it fell of a wall and is in many pieces. Some of which I shall need to purchase.Please advise Peter TaylorTaylor Technical.➡️ Reply Rittenhouse
I have a Master Model 631 & 632, The clock stop working. its showing the red dot on the face of the clock that indicates power failure. The chimes still work fine with no issue. Can you provide instruction on how to test and/or repair. Thank youEddie➡️ Reply Rittenhouse
Ubit was working fine, decided to hook up old style HI-FI unit per instructions and started blowing fuses. Looks like I created a short! Can you give me an idea of cost to repair and shipping charges? Thanks, John Medina➡️ Reply Rittenhouse
i am looking to replace my intercom system and looking for a new system to replace it with.➡️ Reply Rittenhouse
A plunger on my 50 year old door chime is not returning to the rest position when the door chime is not activated. The consequence is a continuous buzz and erratic operation when the button is pressed.Have I provided sufficient information to diagnose the ease of repair?Thank you.Jim➡️ Reply Rittenhouse
Was working well until I sanded and painted the kitchen. I took the chimes down to paint, put them back and nothing works. I get voltage coming in but it doesnt move anything.➡️ Reply Rittenhouse
Was working well until I sanded and painted the kitchen. I took the chimes down to paint, put them back and nothing works. I get voltage coming in but it doesnt move anything.➡️ Reply Rittenhouse
Dear Sir,Our company location is South of Korea.We wish to buy Robopacs wrapping machine spare part from your company if possible. Would you please quote us for followings spare partsvery quickly.Wrapping machine spare partsModel: Helix HS30Serial NO:4111060194Slow roller PGS (code:5650300278) 2setsFast rollerPGS (code:5650310348) 2setsIf you need any informations, please do not hestate contact us anytimes.We look forward to your reply.Best regards,Miseung Trading CoI.S.Jang/President➡️ Reply Robopac
hI, Im John Yang. I currentlty work for Meyer corp and we have 5 of your robopac 2002 model. We need a parts list or a diagram drawing so we can order some repaur parts. At this time we need to replace several front proxi switches, the one that detects the corners. Thank you please email me on how to obtain this info.➡️ Reply Robopac
Robertshaw 100-275-08A oven digital display not powering on or displaying any information. Need immediate repair assistance.➡️ Reply Robertshaw
Remco 025-009460-00b 1804 01 circuit board not responding/powering up when connected to industrial unit. Need repair service ASAP.➡️ Reply Remco
Hi,We have a Robotool CVM1 that we are in the process of retrofitting. Could you give me the info on the following plug connections: J43, J518,J515 J52. We are converting to PC4CNC. The machine was working when we pulled the boards so if there is anyone in the market for them let me know. Any help in this matter would be greatly appreciated.Thanks in Advance Carl➡️ Reply Robotool
Looking looking for someone that can troubleshoot the control box for the Roto tool we can send PCBoards to them to do bug in the main control since we have no idea whats wrong with it it drilled so many holes and goes to one hole again and stops the whole that is already drilled.Are you capable of did bugging such a problem we are in Santa Clara California and were kind of a home shop.➡️ Reply Robotool
Riitenhouse chime model C8538R to connect into the AC adapter 16 volt .➡️ Reply Rittenhouse
Dear Sirs,Please be informed that we are in need of data sheet for THYRISTOR-STROMRCHTER made by Reta Electronic. The type number is 531. Drive model is D5200 Siegburg.Would you let us have data sheet for the same in English, please?Thank you and best regardsBenny➡️ Reply Reta Electronic
hi I have a m7034 intercome system.The out door speak into box was flooded by our sandy storm.Needs to be replaced.The wiring is good and it would be easy to replace if I had original replacement kit. thank you mike➡️ Reply Rittenhouse
Hi, I just moved into house with Artolier Musician M7011 by Rittenhouse which doesnt work. I know you dont know why it doesnt work but any ballpark guesses at repair cost if I ship it to you? My zip is 516539 thx➡️ Reply Rittenhouse
Moved in 3 years ago the AM/FM worked but nothing else. Wondering if I could get an estimate➡️ Reply Rittenhouse
Reliance 2gu21007 not powering on, no response to controls. Need immediate assistance. Thank you.➡️ Reply Reliance
Removed outer casing - now doorbell doesnt work - noticed loose redwire - where do I attach?➡️ Reply Rittenhouse
I have a model Rittenhouse # E780DC door bell push button. The center plastic button is broken. I need a replacement . I can use the whole assemblyPlease email me as to where I can buy it. Thank you.➡️ Reply Rittenhouse
Looking for a technician who can repair a Remco COD.5147 Washer & Dryer Control Board. The unit is unresponsive despite being powered on. Thank you.➡️ Reply Remco
I have a Sears Solid State Am-FM Master Station Radio/Intercom Model 113.35150 built by Emerson Electric. Can you repair this station. Please advise/➡️ Reply Rittenhouse
I have a rittenhouse westminister door chime master model 631 and 632 that I removed from my family home when it was being sold. I have everything except the Rittenhouse no. 42 transformer, which is need before the electrician can install it in my home. Do you have this transformer or know where I can get one? I appreciate your help.➡️ Reply Rittenhouse
Seeking repair for a Recognition Systems Inc. HK-CR hand scanner unit not powering on. Urgently need assistance with diagnosis and repair. Thank you.➡️ Reply Recognition Systems Inc
The control module in my Ram Electronics RAM-1MC1-06 is not responding to any input commands. Looking for repair services to diagnose and fix the issue➡️ Reply Ram Electronics
Reliance 802261-88r not powering on or responding to commands. Urgently seeking repair service.➡️ Reply Reliance
Hey there, Ive been asked to look into an issue with a Rockwell Automation 6189-1CPU366 14020-050 CPU card, but Im not very familiar with hardware repair. I was told the unit needs to be fixed or replaced. Can you provide guidance on how to proceed with this? Any help would be greatly appreciated. Thanks in advance!➡️ Reply Rockwell Automation
Having issues with a Reliance 2GU21002 unit - no power or functions working currently. Need assistance ASAP.➡️ Reply Reliance
The RU Electronics PWB-0636-03 power supply board in our industrial unit is not providing any power output. Looking for a repair service to fix the issue➡️ Reply Ru Electronics
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.
Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.