Welcome to SE

We repair a wide range of SE Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Fair Estimates
• Low Prices

No repair summaries available yet for this manufacturer.

Comments for SE

📝 Chuck McDermott said:

We have a series of Selema drives operating a laminating machine from Italy. The machine was recently moved and two of the six motors are running backwards. Is it possible to change direction at the drive. We have tried changing phases to no avail. Any help you can supply would be greatly appreciated. Thank you. Chuck

➡️ Reply Selema

📝 Ashley Shone said:

I am trying to locate the Web Address for Selema.Please advise if anyone knows.

➡️ Reply Selema

📝 stephen said:

manuals for a selema f1 eco drive

➡️ Reply Selema

📝 Stefan Racz said:

I am looking for a manual (operation/service) to download. I dont know if it is out there such a thing. Any information about this is help to me. thank youStefan

➡️ Reply Selema

📝 bouzrour said:

i want mor explanation about servo-drive selema . s/n 19836 rev 10.110.1 an alarms to appear at the time of the starting up. thank you

➡️ Reply Selema

📝 Salvador Gomez said:

Good morningWe ahve a SELEMA DRIVE and we wish to repair it, would you plese give us mor e info about your experience with this kind of drivesRegardsOur Selema Drive has next infoCod. 09 F1 B2 1020

➡️ Reply Selema

📝 Marco Carrion said:

Dear Sirs,We are in search of providers that can help us repair some of our Selema Servodrives, until now we havent got a positive response to this requirement and so we have been taking out of service our bad servodrives.If you can repair them, and guarantee the correct functioning of them for at least a year then we may have a posible business relationship with you.I would very much appreciate your commentsBest regardsMarco CarrionProjects & Manteinance Planner

➡️ Reply Selema

📝 iraj said:

i need cotolog selema servocod:09 eco4d0512e

➡️ Reply Selema

📝 Salvador Gomez said:

Good morningWe ahve a SELEMA DRIVE and we wish to repair it, would you plese give us mor e info about your experience with this kind of drivesRegardsOur Selema Drive has next infoCod. 09 F1 B2 1020Vac 230Id. 08Date 11/11/05S/N 20712Rev 10.010.1A 10Rev. Man 2.1Spec MARKER 4/4Kw 2.6

➡️ Reply Selema

📝 Salvador Gomez said:

Good morningWe ahve a SELEMA DRIVE and we wish to repair it, would you plese give us mor e info about your experience with this kind of drivesRegardsOur Selema Drive has next infoCod. 09 F1 B2 1020Vac 230Id. 08Date 11/11/05S/N 20712Rev 10.010.1A 10Rev. Man 2.1Spec MARKER 4/4Kw 2.6

➡️ Reply Selema

📝 BR Gupta said:

We have Selema Servo Drive in our CNC Machine. So We want some SeLema Drive for Spare & also want to repair to faulty Drive. Is these any service Center in india..BR Gupta

➡️ Reply Selema

📝 SUDHIR KUMAR VISHWAKARMA said:

Dear Sir, please see detail of PLC-801(Taco-1050)Specification:- Modular AZ2-MY (MVQ) 63302 Selema Code:-09ECOD0410P Vac 230 ID – H7 Date 11/10/07 Vdc -- S/N– 11228 Rev. 18 2.55 A 4 Rev. man 2.4 Spec– 09NETSAP KW – 0.78 Observation :- 1. Fuse connection F1, F2, F3, F4 checked and found OK. 2. K1 and K2 Relay check and found OK. 3. K1 Relay 304 and 307 continuity checked and found OK. 4. All the connections and continuity of wires connected with the above modular are checked and found OK. 5. Modular Voltage Supply Line L1, L2, L3 and U, V, W is OK. 6. The Voltage of 102 and 100 line is also found ok which the value is 24.55 Volts and 0 respectively. 7. There is bad smell from Modular, as already told. 8. Modular fuse is alright. 9. Both Servo motors working. We feel that is something wrong with Modular but we cannot diagnose it .please depute your man to replace or repair it as the care may be. Regards Sudhir Vishwakarma (Maintenance Engineer) For, Steel Products Ltd. Raipur - Unit

➡️ Reply Selema

📝 shivaram prasad said:

We are not having support in India and like to know the supplioers for tehs ame. These drives are installed in SERAM FFS machine to apck powder beverages in pouches.Any one knowing the address and contact in India or oputside may please contact me.ThanksshivaramManager- Maintenancecadbury India limitedBanaglore+91-9845756340

➡️ Reply Selema

📝 V.K.Tyagi said:

We have parker digital servo controller model Compax 1000- SL installed in our machine. There is some error in this drive. Can it be repaired?pls revert ASAP.ThanksVK Tyagi

➡️ Reply Selema

📝 germain Thierry said:

Can you send me a price offer and delay for the following parts :drive Selema 09ECO2M0306E the same of n°0319motor Selema DSM5 32.1045 the same of SN0907243Thank youBest regardsGermain Thierry

➡️ Reply Selema

📝 Len Holowko said:

Please can you tell me if you can supply or repair Vickers DBM 2 and 3 axis servo drives.RegardsLen

➡️ Reply Selema

📝 crstiano braz said:

Good day! To buy ref:selema 70 F1 2 1020P can be used! With emission for Brazil, to enter in contact how much before for this emailthank you!

➡️ Reply Selema

📝 ELIEZER DIAS CARVALHAES said:

FAVOR ENVIAR MANUAL DE MANUTENCAO E OPERACAO DO SELEMA ISD-20 e IPS104012

➡️ Reply Selema

📝 Moisés Fernandes Cunha said:

Se possivel envie me manual do servo converter SELEMA SPLF1 FORMULACOD. 09F1B21326ID-08-A- 13KW- 2,6

➡️ Reply Selema

📝 javier said:

me podrian dar a conocer el manual del servodrive con numero de catalogo COD 09 F1 B3 1836

➡️ Reply Selema

📝 Daniel said:

Hello.I am looking for a Selema drive 70 F1 2 1020P drive, please let me know if you have a unit working, the price and the shipping cost to Argentine.Thank you!

➡️ Reply Selema

📝 stephen said:

i need manuals for a selema f1 eco

➡️ Reply Selema

📝 Moisés Fernandes Cunha said:

Please, if you have a partner in brazil, send me adress or e-mail, because i need to buy a new servo converter. I have a machine,model ( SERAM) manufactared in italy, so the converter breaker. thank you

➡️ Reply Selema

📝 Denilson dee souza said:

Hello, i need the manual drive inverter with the following, cod 70 f1 2 1020p.no more;Sincerely;Denilson de Souza.MTeletrotec

➡️ Reply Selema

📝 ronnie said:

I´m needing a manual of driver selema 70 F1 2 1020P.Please, any send me if possible.Best regards

➡️ Reply Selema

📝 Ariel Delgado Rios said:

I need information to diagram of connection of drive Selma wich has 2 cards. The one has a number SELEMA CIEA840 and the other has SELEMA SDR 3/4

➡️ Reply Selema

📝 ????????? said:

I need information to diagram of connection of drive Selma wich has 2 cards. The one has a number SELEMA CIEA840 and the other has SELEMA SDR /4/CODICE 2038990030120 SUPERSCHEDA ELETTRONSCA SNVERTER 55 KWDATA: 06/08/2013

➡️ Reply Selema

📝 Ashkan said:

Hi,I want know, how to drive STEP BY STEP.F1 Formula Cod, 09 F1 B2 1020 servo motors and drive.Thanks

➡️ Reply Selema

📝 Pieter van der Hoven said:

I have a F1 Eco 2D 0410 drive that was accidentally connected to a 380v outlet.If it is possible to repair it,please send me info.

➡️ Reply Selema

📝 BR Gupta said:

Selema Servo Motor & Drive want to Repair & also have somw query for new Servo Drive & Motors.1. Servo Drive Brushless RTE 09F1B1-0412Vac=230(4A)2. BRUSHLESS MOTOR SMS-T1-M2-030-00-02-A3 Nm=2.13. BRUSHLESS MOTOR N-O-V6-030-31-02

➡️ Reply Selema

📝 HEMANT A. said:

plz contact immidetly Mr. Hemant Mob. +91+8097201388

➡️ Reply Selema

📝 rodolfo sandoval said:

I have problem whit servomotor selema ASYNCHRONOUS BRUSHELESS MOTORCOD MVQ 63 302 14 5DATE 09/09/05S/N 6335 NZ 100 ISOL CLASS FW 785 V 135 A 3.5RPM 3000 PROTEZ IP54ID VA.the drive appear alarm AL-08 , problem with conection at encoder

➡️ Reply Selema

📝 DONALD FUSS said:

We bought and older Atom 735 machine thats now on our plant floor. Unfortunately the X axis is not working. We have narrowed it down to the X drive output power cable to the servo. Seems we arent getting any power from the drive to the motor. Switched X and Y axis connectors at the drive and X axis is working and Y is not. Anyone how to fix this problem. Its an old MDR Compact model.

➡️ Reply Selema

📝 L Norman said:

Hello, Do you repair CM12 Servomac Spindle Drives. Thanks

➡️ Reply Servomac

📝 ruben osnaya said:

we have a driver servomac TPA 3320, 3240 or similar model we want how much cost if you make a all of diagrams of the unit and the components that no cant finder in the market easy, you remplacement that new easy find components. we want make others 50 drivers similar to servomac for others machines the desing is very old but we wont make new more if you wont we can send to you the unit servomac that we have thanks. INDUSTRIAL ACT SA DE CVrafael martines no.50 col.independenciac.p.03630mexico d,fTel.55 39 91 59Fax.55 39 12 92 Ing.Ruben Osnaya Amanager of remanufacturing

➡️ Reply Servomac

📝 N.Reinke said:

Hello, could you send us manuals of servomac cm12a55? Specially for the card CT201B?RegardsN.Reinke

➡️ Reply Servomac

📝 Angel Chen said:

REQUEST FOR A QUOTATION Dear Sir / Madame, Please send us your best price and availability of the following items below : DesC : Seiberco Controller (for rotate) pn: AIM4500 Qty: 1 Model: SP0133B Include the shipping wieght of the item plus inland frieght & TAX if any.to our forwarder in INGLEWOOD CA, Zip 90301. confirm if you accept CREDIT CARDS for payment amounting to 500.00 USD below. If you do not accept credit card please confirm what payment charges can your company accept. Thanks and regards. Angel ChenManagerProcurement & LogisticsTranserve Technologies Corp.ManilaDirect : ( 632) 757 0898Fax : (632) 892-2894

➡️ Reply Seiberco Inc

📝 Sales said:

Most aim4500 run about $800 to $1000 to repair. Give us a call at 1-336-377-3143

➡️ Reply Seiberco Inc

📝 Sean Liang said:

Hi!Please send us your best price and availability of the following items below : DesC : Seiberco Controller (for pc board transfer shuttle gate)pn: AIM 5000Qty: 2Model: DSHX10 21005-1 Include the shipping wieght of the item plus inland frieght & TAX if any.to our forwarder in Morgan Hill, CA, Zip 95037.confirm if you accept CREDIT CARDS for payment amounting to 500.00 USD below.If you do not accept credit card please confirm what payment charges can your company accept.Thanks and regards.Sean LiangEquipment Eng.18735Madrone ParkwayMorgan Hill, CA 95037Direct (408) 782-2409Fax (408) 782-9991sliang@paramit.com

➡️ Reply Seiberco Inc

📝 Randy Eulenfeld said:

I need to find a manual to help me trouble shoot this unit. All of the lights are staying on. We can not get them to reset. Would appreciate some help.

➡️ Reply Seekirk

📝 Timothy Cottrell said:

SEMITOOL 16838A Downtime ReportHello team,I am writing to report an unplanned downtime incident with the SEMITOOL 16838A unit earlier today. The specific issue that caused the downtime is currently unknown, but it occurred at approximately 1045 AM during the production shift. Our team is working diligently to diagnose and resolve the problem as quickly as possible to minimize any further disruptions. If anyone has any insights or information that could help expedite the troubleshooting process, please reach out to me before the next shift begins.Thank you for your attention to this matter.Best regards,Shift Supervisor

➡️ Reply Semitool

📝 Casey Clausen said:

I would like to purchase a Seiberco AIM 4500 DSLX 21027 operations manual.Do you have one and what is the price?

➡️ Reply Seiberco Inc

📝 Drazen Bilavcic said:

I am looking for a schmatic for this board. The model no. is 235704, the date code is 980701, Desription MillMain PCB. I also have a drawing number 1001,235704. If some can find and send me a schmatic would really help me out.

➡️ Reply Semifusion Corp

📝 sterling higashi said:

Hello from Hawaii,Can someone tell me if you have a rebuilt or new motor controller for a Lectra e bike.sincerely,sterling higashieco Power Systems - Electric Vehicle Technologieswww.evtechhawaii.com

➡️ Reply Semifusion Corp

📝 Pavlicek said:

My Sevcon Millipak controller is not powering on, and the machinery it controls is non-functional. Looking for a technician who can diagnose and repair the issue

➡️ Reply Sevcon

📝 MR RAUL BRAVO said:

PLEASE NEED A REQUEST QUOTE FOR ONE SEIBERCO AIM 5000 NEW OR USED FOR ME MACHINE.BEST REGARDS.

➡️ Reply Seiberco Inc

📝 Cap Weir said:

Need Documentation about programming a AIM 4000. Have a few that came off a funning unit, and would like to use them somewhere else.. CAP

➡️ Reply Seiberco Inc

📝 Rick Casieri said:

Hi, I am looking for working AIM 4000 L series control boards.

➡️ Reply Seiberco Inc

📝 Manuel Rodriguez said:

sensing head ( tacho system )type: 371.005ref. diagram. No. 371.018.001Soren T. Lyngso

➡️ Reply Sensor

📝 Manuel Rodriguez said:

sensing head ( tacho system )type: 371.005ref. diagram. No. 371.018.001Soren T. Lyngsoplease, give me price and time delivery.thanksManuel Rodriguez

➡️ Reply Sensor

📝 arce said:

Inquiry Regarding Seiscor TR-8 Board Pricing and AvailabilityDear ,I hope this message finds you well. I am currently in the process of acquiring a Seiscor TR-8 board for a repair project. My team recommended reaching out to you to inquire about the pricing and availability of this particular model.Could you please provide information on the pricing and current stock availability of the Seiscor TR-8 board? I am looking to source one

➡️ Reply Seiscor

📝 Mauro Aragno said:

Inquiry about Sevcon 150-14680 REV B Fuse Board Repair or SaleHello,I hope you are doing well. I am reaching out regarding a Sevcon 150-14680 REV B Fuse Board that I was asked to inquire about. Unfortunately, the person who provided me with this information did not give me any details or description of the issue. If you or anyone you know could provide assistance with repairing or selling this particular fuse board, I would greatly appreciate it. Any guidance or information you could provide would be very helpful.Thank you for your time and attention to this matter. I look forward to hearing from you soon.Warm regards,

➡️ Reply Sevcon

📝 Verlin Schurman said:

Machine is displaying error code E005 and shutting down after 5 minutes of operation.Ordering a replacement control panel to resolve the issue.

➡️ Reply Seco

📝 Jesse Belmarez said:

I have a Mdl. sl750012502. Will not lock in vert/hor. Please inform me as to the components I need to replace. Cannot find any sheets on this model. Is in in a Deer Hunter Video Game.Thanks in advanceJesse

➡️ Reply Selti

📝 Bill Emmers said:

Seiberco AIM 5000 drive not functioning properly, seeking repair service urgently.

➡️ Reply Seiberco

📝 Rohit Jain said:

One of our Seidel Servo Motors is not fuctioning as water has entered the motor, hence we suspect that he motors need repairing. So please inform us where in India can we give Seidel Motor for repair, if so please send us the contact details. If not please advice on where can we get it serviced.Thanking You,Best RegardsRohit Jain

➡️ Reply Seidel

📝 parveen arora said:

you can contact him also

➡️ Reply Seidel

📝 ken Tucker said:

The SENSOR PULSE SP 4000 REV.3 MODULE unit is not working.

➡️ Reply Sensor Pulse

📝 Kirk Niatsikas said:

: Our industrial unit is experiencing persistent issues with the hydraulic system in our production line. We have experienced multiple malfunctions, including incomplete processing of orders and production delays. The units hydraulic pressure control mechanism has been failing intermittently, causing significant disruptions to our workflow. While we believe a direct replacement for the existing hydraulic unit might be necessary, we need an assessment of the full scope of potential repairs and cost estimates for both repair options (full rebuild/replacement).:

➡️ Reply Sevcon

📝 Slavisa Zivkovic said:

I need Service manual for Setra 215.

➡️ Reply Setra

📝 MINA said:

I have a selema drive ( F1 FORMULA , code 70F1 2 1020P ) it loading its setting correctly , but the motor didnt run did you have any information about this problem best regard thanks

➡️ Reply Selema

📝 Dan Hensley said:

: I am experiencing issues with my refrigerator. The unit no longer cools properly, resulting in food spoiling quickly. I have checked the thermostat and it is set to the correct temperature. While the unit does display some functions like defrosting and ice making, the cooling is the primary issue. Based on estimates, a repair for this issue might cost between $300-$500. If the problem cannot be resolved through repair, I will need to consider replacement options, which may involve a substantial investment.:

➡️ Reply Selema

📝 Ang Joo Hin said:

I am a business customer with a Sentex Systems 1100050 Keypad Control Board that is not functioning properly. The unit is unresponsive when keypad inputs are entered, possibly indicating a failure in the control board. I would like to inquire about repair services for this issue and the estimated replacement cost, especially if the unit is deemed high in value.

➡️ Reply Sentex Systems

📝 GUSTAVO CARRERA said:

Hey team, the Sevcon Millipak 633T45312 controller in Unit X went down mid-shift. Need someone to check it out ASAP in the morning. Thanks!

➡️ Reply Sevcon

📝 Ho said:

One of the Servo Drives in the Seiberco Inc AIM 5000 just failed, need to replace it ASAP to avoid production downtime. Heading to retrieve spare parts now.

➡️ Reply Seiberco Inc

📝 Jared Weaver said:

Hello, I am reaching out regarding my Servomac CT221C unit. The issue I am experiencing is related to the board, as the unit is failing to power on or display any signs of functionality. This problem arose suddenly without any prior warning signs. I have attempted basic troubleshooting steps such as checking the power source and connections, but the unit remains unresponsive. Based on this issue, I would appreciate insights on the repair process and an estimated cost for board replacement to restore the functionality of my Servomac CT221C unit. Thank you for your assistance.

➡️ Reply Servomac

📝 SidneyWRIT said:

Repair Inquiry for Seidel Digifas 7200 - Part Number & Issue DescriptionDear Repair Shop,I am reaching out on behalf of my client who is experiencing issues with their Seidel Digifas 7200, a digital servo amplifier drive. The part number for this unit is included below.Part Number Seidel Digifas 7200Description of Issue The client has reported a problem with the servo amplifier drive and is in need of repair services.Please let me know if you require any further information to assist with troubleshooting and providing a quote for the repair.Thank you for your attention to this matter.Warm regards,

➡️ Reply Seidel

📝 ron bell said:

➡️ Reply Seiberco Inc

📝 Karen Lopez said:

quote, pleaseServoDriverMarca: SeibercoModelo: AIM 4500 SSL04K 11030Serie: SN-951007 10/95we use it for a system x-cut and in a high pressure water cutterthank you!

➡️ Reply Seiberco Inc

📝 steve hawey said:

Can the Semikron CP0365B1 Transformer I/F Board be repaired or bought? Im looking to check this off my to-do list.

➡️ Reply Semikron

📝 Ing. Omar Martinez said:

: Our industrial unit, a 10,000 sq ft facility used to manufacture high-pressure hydraulic pumps, has experienced a catastrophic failure in its main control system, rendering it completely unusable. Since the control system is crucial for ensuring safe and efficient operation of the machinery, our production has come to a standstill, resulting in significant financial losses. We have assessed the potential repair costs at a minimum of $50,000, with the possibility of even higher expenses depending on the extent of damage and availability of replacement parts. However, given the critical nature of this unit and its long-term reliance on our manufacturing processes, we are exploring alternative options such as rebuilding the control system or seeking out a pre-existing, similar unit for a quicker solution.:

➡️ Reply Sevcon

📝 Shigong Yang said:

Hello, I am interested in the Semikron SKKT 72/12E Dual Thyristor Module SCR for possible purchase. Could you please provide information on pricing and availability? I am looking to source one quickly for a specific project. Thank you.

➡️ Reply Semikron

📝 kulwnt said:

Having issues with the Servo Products Turbo Drive on the power feeder. Need a technician to quickly fix it, as its affecting our productivity. Thank you.

➡️ Reply Servo Products

📝 mangesh shanbhag said:

The Serigrafia 8.5.24.32/C LS controller PCB is exhibiting abnormal behavior. It is not functioning as it usually does. Further investigation is required to identify the issue.

➡️ Reply Serigrafia