Welcome to SEI

We repair a wide range of SEI Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Free Estimates
• Low Prices

No repair summaries available yet for this manufacturer.

Comments for SEI

📝 Angel Chen said:

REQUEST FOR A QUOTATION Dear Sir / Madame, Please send us your best price and availability of the following items below : DesC : Seiberco Controller (for rotate) pn: AIM4500 Qty: 1 Model: SP0133B Include the shipping wieght of the item plus inland frieght & TAX if any.to our forwarder in INGLEWOOD CA, Zip 90301. confirm if you accept CREDIT CARDS for payment amounting to 500.00 USD below. If you do not accept credit card please confirm what payment charges can your company accept. Thanks and regards. Angel ChenManagerProcurement & LogisticsTranserve Technologies Corp.ManilaDirect : ( 632) 757 0898Fax : (632) 892-2894— Purchase or Repair:

➡️ Reply Seiberco Inc

📝 Casey Clausen said:

I would like to purchase a Seiberco AIM 4500 DSLX 21027 operations manual.Do you have one and what is the price?— Purchase or Repair:

➡️ Reply Seiberco Inc

📝 SONATRACH said:

Our Seiberco AIM 5000 DS Hx10 21005-1 unit is still down. We need assistance with the servo control. Its crucial that we receive a response— Purchase or Repair:

➡️ Reply Seiberco

📝 MR RAUL BRAVO said:

PLEASE NEED A REQUEST QUOTE FOR ONE SEIBERCO AIM 5000 NEW OR USED FOR ME MACHINE.BEST REGARDS.— Purchase or Repair:

➡️ Reply Seiberco Inc

📝 arce said:

Inquiry Regarding Seiscor TR-8 Board Pricing and AvailabilityDear ,I hope this message finds you well. I am currently in the process of acquiring a Seiscor TR-8 board for a repair project. My team recommended reaching out to you to inquire about the pricing and availability of this particular model.Could you please provide information on the pricing and current stock availability of the Seiscor TR-8 board? I am looking to source one— Purchase or Repair:

➡️ Reply Seiscor

📝 Bill Emmers said:

Seiberco AIM 5000 drive not functioning properly, seeking repair service urgently.— Purchase or Repair:

➡️ Reply Seiberco

📝 Rohit Jain said:

One of our Seidel Servo Motors is not fuctioning as water has entered the motor, hence we suspect that he motors need repairing. So please inform us where in India can we give Seidel Motor for repair, if so please send us the contact details. If not please advice on where can we get it serviced.Thanking You,Best RegardsRohit Jain— Purchase or Repair:

➡️ Reply Seidel

📝 Flood said:

Hi, we have a Seiberco Aim 4000 H series DSH 3430-536-DX506 motion controller that needs repair. Can you please provide repair information or replacement options? Thanks. — Purchase or Repair:

➡️ Reply Seiberco

📝 oumar sako said:

The Seiberco Aim 4000 H series DSH 3430-536-DX506 motion controller is displaying error code E014 and not responding to any input commands. — Purchase or Repair:

➡️ Reply Seiberco

📝 saeid said:

The Seiberco Aim 4000 H series DSH 3430-536-DX506 experienced downtime today. The issue occurred during the second shift around 300 PM. Need a quick response before the next shift comes in. — Purchase or Repair:

➡️ Reply Seiberco

📝 jaja-bagus-A said:

We experienced downtime with the Seiberco Aim 4000 H series DSH 3430-536-DX506 unit earlier today around 1130 am. Can you provide some insight into what went wrong so we can resolve the issue before the next shift starts? Thank you. — Purchase or Repair:

➡️ Reply Seiberco

📝 JAYASINGHE said:

Seiberco Aim 4000 H series DSH 3430-536-DX506 not responding to motion commands. — Purchase or Repair:

➡️ Reply Seiberco

📝 churu said:

Im sorry to report that the Seiberco Aim 4000 H series DSH 3430-536-DX506 appears to be experiencing some issues. It seems like a component related to its functionality may have stopped working. Well need further investigation to determine the exact problem. — Purchase or Repair:

➡️ Reply Seiberco

📝 lashkari said:

Please provide an update on the support status and the availability of replacement parts for the Seiberco Aim 4000 H series DSH 3430-536-DX506 Advanced Integrated Motion Controller. We are looking for options for repair or replacement, but given its age, we are unsure about its manufacturer. Thank you. — Purchase or Repair:

➡️ Reply Seiberco

📝 MOLM said:

Please provide an update on the Seiberco Aim 4000 H series DSH 3430-536-DX506 as it is still not functioning. It is crucial that we receive a response — Purchase or Repair:

➡️ Reply Seiberco

📝 amin said:

the Seiberco Aim 4000 H series DSH 3430-536-DX506 is down. Need someone to check it out ASAP in the morning. Thanks! — Purchase or Repair:

➡️ Reply Seiberco

📝 christa said:

Machine not responding to any commands. — Purchase or Repair:

➡️ Reply Seiberco

📝 NICOLAS IELLIMO said:

The Seiberco Aim 4000 H series DSH 3430-536-DX506 is displaying error code 5B. The machine is not moving despite attempts to reset it. Please advise on next steps urgently. — Purchase or Repair:

➡️ Reply Seiberco

📝 Riccio said:

Seiberco Aim 4000 H series DSH 3430-536-DX506 is displaying error code 342R. — Purchase or Repair:

➡️ Reply Seiberco

📝 Henry Wood said:

Seiberco Aim 4000 H series DSH 3430-536-DX506 drive or board failure. Need urgent attention. — Purchase or Repair:

➡️ Reply Seiberco

📝 sumawan said:

The Seiberco Aim 4000 H series DSH 3430-536-DX506 motion controller is malfunctioning, causing delays on the production line. Need immediate repair to restore operations — Purchase or Repair:

➡️ Reply Seiberco

📝 craig rogers said:

Seiberco Aim 4000 H series DSH 3430-536-DX506 not powering on when switched on. — Purchase or Repair:

➡️ Reply Seiberco

📝 Pilloud said:

Hello, Im interested in purchasing a Seiberco Aim 4000 H series DSH 3430-536-DX506 Advanced Integrated Motion Controller. Could you please provide information on pricing and availability? Im looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Seiberco

📝 crobella said:

We experienced unexpected downtime today due to a malfunction with the Seiberco Aim 4000 H series DSH 3430-536-DX506 unit. This unit is an Advanced Integrated Motion Controller. Can you provide insights on what went wrong so we can address it before the next shift starts? Thank you. — Purchase or Repair:

➡️ Reply Seiberco

📝 Otis emery said:

The Seiberco Aim 4000 H series DSH 3430-536-DX506 is not working. — Purchase or Repair:

➡️ Reply Seiberco

📝 Jabes said:

The Seiberco Aim 4000 H series DSH 3430-536-DX506 motion controller is malfunctioning, causing a critical disruption in our production line. Immediate repair action is necessary to restore operations urgently. — Purchase or Repair:

➡️ Reply Seiberco

📝 Tom R said:

The Seiberco Aim 4000 H series DSH 3430-536-DX506 Advanced Integrated Motion Controller is malfunctioning and needs repair urgently. Looking for a technician with expertise in industrial unit repairs to fix the issue — Purchase or Repair:

➡️ Reply Seiberco

📝 Leann said:

The Seiberco Aim 4000 H series DSH 3430-536-DX506 is displaying Error Code E302. The equipment is not responding to any commands and no movement is detected. Please advise on troubleshooting steps. Thank you. — Purchase or Repair:

➡️ Reply Seiberco

📝 Brooke said:

The Seiberco Aim 4000 H series DSH 3430-536-DX506 is displaying error code E203 and showing Overcurrent Fault alarm. Equipment is currently non-operational. Please advise on troubleshooting steps or immediate repairs required. — Purchase or Repair:

➡️ Reply Seiberco

📝 Robert Garrett said:

The Seiberco Aim 4000 H series DSH 3430-536-DX506 experienced downtime due to a malfunction in the Advanced Integrated Motion Controller. The issue occurred yesterday during the night shift. Need assistance ASAP. — Purchase or Repair:

➡️ Reply Seiberco

📝 Robert Clemons said:

This is a reminder that the Seiberco Aim 4000 H series DSH 3430-536-DX506 is still down and in need of immediate attention. Please respond — Purchase or Repair:

➡️ Reply Seiberco

📝 Ho said:

One of the Servo Drives in the Seiberco Inc AIM 5000 just failed, need to replace it ASAP to avoid production downtime. Heading to retrieve spare parts now.— Purchase or Repair:

➡️ Reply Seiberco Inc

📝 SidneyWRIT said:

Repair Inquiry for Seidel Digifas 7200 - Part Number & Issue DescriptionDear Repair Shop,I am reaching out on behalf of my client who is experiencing issues with their Seidel Digifas 7200, a digital servo amplifier drive. The part number for this unit is included below.Part Number Seidel Digifas 7200Description of Issue The client has reported a problem with the servo amplifier drive and is in need of repair services.Please let me know if you require any further information to assist with troubleshooting and providing a quote for the repair.Thank you for your attention to this matter.Warm regards,— Purchase or Repair:

➡️ Reply Seidel

📝 ron bell said:

— Purchase or Repair:

➡️ Reply Seiberco Inc

📝 Dieter said:

Im experiencing an issue with the Seiberco AIM 5000, a Servo Drive machine. It seems like something has stopped working properly, but Im unsure about the specific details due to my position. I appreciate your assistance in looking into this matter.— Purchase or Repair:

➡️ Reply Seiberco

📝 surbhi jain said:

Hello, I am reaching out on behalf of my client who is experiencing issues with their Seiscor Protocol TR-8 board. Can you please provide information on troubleshooting and repair options for this particular board? Thank you.— Purchase or Repair:

➡️ Reply Seiscor Protocol