Welcome to Socapel

We repair a wide range of Socapel Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.


Why to send us your work?

To receive more information about your Socapel industrial electronics unit, please contact us at 1-336-969-0110. We offer testing, refurbishment, and extended warranty support for Socapel equipment. Our team of experts is here to assist you with any questions or concerns you may have.

🛠️ Common AI Repair Summaries 🏭

🔧 Socapel 096-0021 (Unknown)

The Socapel 096-0021 is a high-performance power supply module designed for industrial electronic applications. It features a compact design, high efficiency, and excellent stability, making it suitable for various industrial environments. Typical failures in the Socapel 096-0021 may include overheating, component degradation, and input/output voltage irregularities. Careful monitoring and timely maintenance are essential to ensure the reliable operation of this power supply module.

  • Part:
  • Est. Repair Price: $2,528.00 (est.)
🔧 Socapel st1-80-310 (Unknown)

The Socapel ST1-80-310 is a DC motor drive used in industrial applications for controlling the speed and torque of DC motors. It features a compact design, high efficiency, and robust construction suitable for harsh industrial environments. Typical failures include power supply issues, faults in control circuits, and component failures due to overheating or voltage spikes. Troubleshooting involves thorough inspection of components, testing of control signals, and monitoring of power supply voltages. Regular maintenance is recommended to ensure optimal performance and prevent costly downtime.

  • Part:
  • Est. Repair Price: $4,028.00 (est.)
🔧 Socapel st1-10-310 (Unknown)

The Socapel ST1-10-310 is a compact industrial electronic device typically used for signal processing and control applications. It features 10 input channels and 10 output channels, which can be configured for various signal types such as analog or digital. Common failures in the Socapel ST1-10-310 include issues with the power supply, faulty input/output connectors, and failure of electronic components such as capacitors or resistors. It is important to perform regular maintenance checks and proper calibration of the device to prevent potential failures.

  • Part:
  • Est. Repair Price: $3,054.00 (est.)
🔧 Socapel sa3b-40-200 (Unknown)

The Socapel sa3b-40-200 is a high-power industrial electronic circuit breaker designed for protecting electrical systems from overcurrent faults. It features a rated voltage of 240V and a current rating of 40A. The device is equipped with thermal and magnetic trip mechanisms to ensure precise and reliable operation in case of a fault. Typical failures of the Socapel sa3b-40-200 include overheating due to sustained overcurrent conditions, mechanical wearing of moving parts, and electronic component degradation. Regular maintenance and calibration are recommended to ensure optimal performance and safety.

  • Part:
  • Est. Repair Price: $4,072.00 (est.)
🔧 Socapel 096-0001()

The Socapel 096-0001 is a programmable logic controller (PLC) used in industrial automation systems. It features modular design with removable input/output modules for easy maintenance and expansion. The device is equipped with a microprocessor for executing user-defined logic to control various processes within a factory or plant. Typical failures include power supply issues, malfunctioning input/output modules, and software programming errors. It is important to have a thorough understanding of the device's programming language and hardware components to effectively troubleshoot and repair any issues that may arise.

  • Part: 096-0001
  • Est. Repair Price: $2,650.00 (est.)
🔧 Socapel 096-0010 (Unknown)

The Socapel 096-0010 is a high-frequency inverter designed for industrial applications. This device is typically used to convert DC power to AC power with precise frequency and voltage control for driving various types of motors. Key features of the Socapel 096-0010 include a compact design, high efficiency, and robust construction to withstand harsh industrial environments. It also offers advanced protective features such as overcurrent protection, overvoltage protection, and short circuit protection to prevent damage to the inverter and connected equipment. Typical failures of the Socapel 096-0010 include blown fuses, damaged capacitors, faulty power transistors, and control board malfunctions. Regular maintenance and timely replacement of worn-out components can help prolong the lifespan of this inverter.

  • Part:
  • Est. Repair Price: $2,878.00 (est.)
🔧 Socapel 096-0010()

The Socapel 096-0010 is a digital input module used in industrial automation systems. It features 16 channels for receiving digital input signals. Typical failures in this device include short circuits in the input channels, faulty connection points, and damage to the input circuitry due to voltage spikes. Regular maintenance and careful handling can help prevent these issues.

  • Part: 096-0010
  • Est. Repair Price: $1,750.00 (est.)
🔧 Socapel sa3ad-60-200 (Unknown)

The Socapel SA3AD-60-200 is a three-phase bridge rectifier commonly used in industrial electronic systems. Its purpose is to convert three-phase AC voltage into DC voltage. The device features a maximum current rating of 60A and a voltage rating of 200V. Typical failures include short circuits, open circuits, and damage to the diodes due to overvoltage or overcurrent conditions. Regular maintenance and monitoring of voltage and current levels are recommended to prevent failures and ensure proper operation.

  • Part:
  • Est. Repair Price: $5,502.00 (est.)
🔧 Socapel 096-0008()

The Socapel 096-0008 is a digital input module designed for industrial automation applications. It features 16 input channels suitable for connecting various sensors and detectors. The module typically interfaces with programmable logic controllers (PLCs) to monitor the status of external devices. Common failure modes in the Socapel 096-0008 module include damage to input circuits due to voltage spikes or transient overloads, failure of input/output isolation components, and malfunctioning of communication interfaces. Regular maintenance and inspection are recommended to ensure optimal performance and prevent unexpected downtime.

  • Part: 096-0008
  • Est. Repair Price: $2,650.00 (est.)
🔧 Socapel sam-da-480-07b-p4n-f (Unknown)

The Socapel SAM-DA-480-07B-P4N-F is a digital-to-analog converter designed for industrial applications. This device converts digital signals into analog signals with high precision and accuracy. It features 7 output channels, 16-bit resolution, and a programmable sampling rate. Typical failures in this device include power supply issues, signal distortion, and component failures leading to inaccurate output signals. Regular maintenance and calibration are recommended to ensure proper functionality.

  • Part:
  • Est. Repair Price: $5,558.00 (est.)

Comments for Socapel

15 comments found.
📝 Andrew said:
Dear Sir! Sorry for the wrong e-mail address! This one is correct.The following problem has been occuring quite often on one of our machines for some weeks. One Socapel SAM-drive (SAM-DA-400-14N-P1N-D) stops the whole machine and displays 7 and F characters on its 7-segment display. At this time the PAM-controller (PAM-S1N-L4E-AP V10000)displays 0780F020 but the SIEMENS S5-115U PLC has no fault. This problem with the SAM can be reset by the PAM or restarting the PLC. According to the PAM-SAM Troubleshooting Guide fault code F means Main CPU fault (fault handler). Which CPU does this refer to, SAM, PAM or PLC? What else can cause this problem and what we can do, before replacing something? Unfortunately, we do not have any software tools for checking the PAM-SAM system, only for the CPU. Waiting for your quick reply on e-mail... Sincerely Yours
➡️ Reply Socapel
        
📝 M.Saleem said:
The following problem has been occuring quite often on one of our machines for some days. the PAM-controller (PAM-P1N-H8F-AP-P V10810)displays 0B80E002 but the SIEMENS S7-315-2DP CPU has no fault. bUT MACHINE STOP, WHILE ALL THE SAM (SAM-DA-400-07N-P4N-E) ON 1 This is SAM Normal State.what is the cause of this problem and what we can do, before replacing something? Unfortunately, we do not have any software tools for checking the PAM-SAM system, only for the CPU. Waiting for your quick reply on e-mail... Sincerely Yours
➡️ Reply Socapel
                
📝 Abrar Hussain said:
The following problem has been displaying quite often on one of our machines for some days. the PAM-controller (PAM-P1N-H8F-AP-P V10800)displays 0B80E003 but the SIEMENS S7-315-2DP CPU has no fault. but MACHINE STOP, WHILE ALL THE SAM (SAM-DA-400-07N-P4N-E) ON 1This is SAM Normal State.what is the cause of this problem and what we can do, before replacing something? Unfortunately, we do not have any software tools for checking the PAM-SAM system, only for the CPU. Also we are facing problem 2b on our SAM unit of main Blanket motor . It happens many times in a week.Please advice.Waiting for your quick reply on e-mail... Sincerely YoursAbrar
➡️ Reply Socapel
                        
📝 Adem Ceyhaner said:
Dear Sir ;We have faced with the same problem you mentioned.the first problem is because of the PAM and we could not get rid of the problem.The second problem is because of the Blanket motor you should change the motor beacuse 2b means overcurrent. We have faced with the same problem and solved the problem with changing of the blanket motor.Good luck.
➡️ Reply Socapel
                                
📝 IMRAN MIAN said:
Hi Dear, My Machine installed Pam drive but display show ERROR 0B80E002.plz send error means or send any manual best regards,Imran Mian+92 300 2428847
➡️ Reply Socapel
                                        
📝 Rashidul Hasan said:
Hi Dear,My Machine installed Pam drive but display show ERROR 680F005.plz send error means or send any manual Thank youRashidul HasanElectrical EngineerNoman Group of industries.
➡️ Reply Socapel
                                                
📝 tariq mehmood said:
we Face problem in our pam Error code 0B80E010. Please help us in this matter.
➡️ Reply Socapel
                
📝 Ersin Ak said:
Dear Friendswe need 1 pc. Socapel PAM-P1N-H8F AP-P V10600. If you have one of this Type, please contact us as soon as possible and give your offer.Best RegardsErsin AK
➡️ Reply Socapel
                        
📝 reza said:
hican you repair a pam for us.if yes email to me.thanks reza
➡️ Reply Socapel
                                
📝 sohail umer said:
sam and pamp quotation required
➡️ Reply Socapel
                                
📝 amjad said:
i want a troubleshootin manual of sam drive
➡️ Reply Socapel
                
📝 mike said:
Could I get a list of error codes for this model? I have an error 25 or 52. I also have a pam to plc link lost. all other drives have no error.
➡️ Reply Socapel
                        
📝 shahzad said:
sam-da-400-07n-p4n-e-------------------------------------------------------------------------------- Posted by mike on Tuesday, November 11 2008Could I get a list of error codes for this model? I have an error 25 or 52. I also have a pam to plc link lost. all other drives have no error.
➡️ Reply Socapel
                
📝 ALEKSANDER said:
I have a problem with SAM DA 400-07N-P4N-E on can-bodi line SOUDRONIC.Its alarm 06XXF00E after one hour work.May I resolved this problem ?How much cost this new device?
➡️ Reply Socapel
                
📝 Wilson Gasch Junior said:
Do you have some representative in Brazil? I have SAM and PAM units in my machine who needs to be repaired.Im waiting for your answer,Best regards,Wilson
➡️ Reply Socapel
                        
📝 Brendan said:
Hello;We need Socapel SAM and PAM for our machinery as spare parts. If you have or you know the source from where we can get, please let me know at my email addresss; sparesformachines@gmail.com.Would appreciate your prompt response. Thanks.
➡️ Reply Socapel
                        
📝 cesar viglianco said:
um socapel motorista Ola Eu tenho sam-da-400-07n PRN-em506l conectado a um nuebo motor 0r0d-0029-0 quando desistir de erro resover da-nos acreditar que nos deve sintonizar o motor com o driver.E possivel facilitar o software(ferramentas SAM)
➡️ Reply Socapel
                
📝 Adem Ceyhaner said:
To Whom that may concern;We have one Socapel PAM Unit which is defecetive and gives error like 0080EE21, 0B80E002 etc.Please let me know that have ever repaired this Unit or not.I am waiting for your helpBEST REGARDSADEM CEYHANERMENDERES TEKSTIL AS / TURKEY
➡️ Reply Socapel
        
📝 Tahir Hussain said:
Dear,I am looking for following SERVO controllers made by DANAHER MOTION:SAM-DA-400/480-07B-P5N-G (Part # 9032012567)SAM-DA-400/480-14B-P4N-F (Part # 9032010563)Rgds, Tahir Hussain
➡️ Reply Socapel
                
📝 mustafa colak said:
socapel-sam smart axis manager SAM-DA-400-50N-P4N-E SAM-DA-400-07N-P4N-ESOCAPEL POWER SUPPLY SAM-PA-400-80-ESOCAPEL-PAM PAM-P1N-H8F-AP-P V10810
➡️ Reply Socapel
                        
📝 mohamed habib said:
dear sir please send us the availability of inverter power socapel for welding machine for can of tin-plateTHINK YOU BSET REGARD
➡️ Reply Socapel
                        
📝 Rashidul Hasan said:
Dear sir,I would like to inform you that i want to purchase socapel-sam smart axis manager SAM-DA-400-50N-P4N-E 01 pcsIf you have this device pls send your Quotation or offer.Thanks Md.rashidul HasanElectrical EngineerNoman Group of industrieswww.nomangroup.comemail: rashidul@znzfab.com
➡️ Reply Socapel
                                
📝 Nisitha said:
I would be grateful if you could let me know the availability of scapula SAMSAM-DA-400-50N-P4N-E Nisitha Warnakulasuriya
➡️ Reply Socapel
                                
📝 Nisitha said:
I would be grateful if you could let me know the availability of scapula SAMSAM-DA-400-50N-P4N-E Nisitha Warnakulasuriya
➡️ Reply Socapel
                        
📝 Md.Rashidul Hasan said:
Dear sir,I would like to inform you that i need socapel-sam smart axis manager SAM-DA-400-50N-P4N-E Drive if this drive is your collection please inform me with price and conditionThank you very much.Md.Rashidul HasanElectrical EngineerZaber & Zubair Fabrics Ltd.mob: 01746399155,01911397522Email: rashidulhm@gmail.com rashidul@znzfab.comWeb: www.nomangroup.comSkype: rashidul
➡️ Reply Socapel
                        
📝 abid said:
i need a SAM-DA-400-50N-P4N-E PLEASE ADVISE IF YOU HAVE AVAILABLE AND WHATS THE PRICE OF THIS.
➡️ Reply Socapel
        
📝 ADEM said:
We face with the problem that is about communication between PAM and SAM drives. We have S7-300 PLC, 1 PAM and 13 SAM Drives. During running the machine we face a error Head Communication Error(head means SAM drives for this machine) and we observed followwing error on the PAM 0B80E002,0B80E003 or 0B80E01F.We think that this problem is because of the PAM.My question is how can i repair this PAM and Where i buy PAM from.please respond us as soon as possible
➡️ Reply Socapel
        
📝 David Stanton said:
I have a Socapel 25-310 ac drive that is giving us a #6 fault code on the display and we do not have a listing for that fault.
➡️ Reply Socapel
        
📝 TaceCertieree said:
Hello, i newbie, anybody can help me?
➡️ Reply Socapel
        
📝 Addiniamync said:
I need a driver for my phillips snn6500 wireless netcardor smc2632 wireless net cardI cant make them run on linpus linux liteplease helpregardsAddiniamync
➡️ Reply Socapel
        
📝 Leo said:
With have a problem wiht the sam, tha alar is 2t, corresponding in the manual a problem with the temperature in the motor, but also say wit is posible tha sam is bad. I change the unit and program and continue with the sim error, what is your oppinion, thanks
➡️ Reply Socapel
        
📝 JACKELINE said:
SERVO SOCAPEL AMPLIFIER ST1 /80/310 YNO 9032011677
➡️ Reply Socapel
        
📝 hussnain said:
i want to take sam drive to running condition without connecting pam.please help me Thanks hussnain
➡️ Reply Socapel
        
📝 jaswant said:
dear sir servo drive manual sam-da-400-07 n-p4n- e modal . tests& services ,repairs manual pdf file Please sand my email address. Thanks.
➡️ Reply Socapel
        
📝 Wasim Abbas said:
Dear Concern, Please see under below detail then quote rate and also share performa invoice now on first priority.1)SAM-DA-400/480-07N-P4N-E 06 PcsIm waiting your Quick and positive reply
➡️ Reply Socapel
📝 Mustafa Çolak said:
i have a socapel sam-da07 unit to sell
➡️ Reply Socapel
📝 JAFFAR said:
The Socapel ba3-75-200 is malfunctioning with an unknown issue affecting the production line. Urgent action is needed to diagnose and resolve the problem in order to minimize downtime and restore operations swiftly. Please allocate resources to address this critical situation
➡️ Reply Socapel
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.