Welcome to Socapel

We repair a wide range of Socapel Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.


Why to send us your work?

To receive more information about your Socapel industrial electronics unit, please contact us at 1-336-969-0110. We offer testing, refurbishment, and extended warranty support for Socapel equipment. Our team of experts is here to assist you with any questions or concerns you may have.

🛠️ Common AI Repair Summaries 🏭

🔧 Socapel sam-da-480-07b-p4n-f (Unknown)

The Socapel SAM-DA-480-07B-P4N-F is a digital-to-analog converter designed for industrial applications. This device converts digital signals into analog signals with high precision and accuracy. It features 7 output channels, 16-bit resolution, and a programmable sampling rate. Typical failures in this device include power supply issues, signal distortion, and component failures leading to inaccurate output signals. Regular maintenance and calibration are recommended to ensure proper functionality.

  • Part:
  • Est. Repair Price: $5,558.00 (est.)
🔧 Socapel 004-7050 (Unknown)

The Socapel 004-7050 is a solid-state relay designed for industrial applications. It features a compact design, high switching frequency, and low power consumption. Typical failures in this model include internal short circuits, overheating due to poor ventilation, and failure of the control circuit. Regular maintenance and monitoring of the relay's operating temperature are recommended to prevent malfunctions.

  • Part:
  • Est. Repair Price: $1,304.00 (est.)
🔧 Socapel ba4-60-80-310 (Unknown)

The Socapel ba4-60-80-310 is a three-phase bridge rectifier module used for converting alternating current (AC) into direct current (DC) in industrial applications. It typically operates at a voltage rating of 600 volts and a current rating of 80 amperes. The module is designed to provide efficient and reliable power conversion, with features such as built-in thermal protection and overvoltage protection. Common failures in this device include shorted or open diodes, damaged solder joints, and overheating due to inadequate cooling. Regular maintenance and monitoring are recommended to ensure optimal performance and prevent unexpected downtime.

  • Part:
  • Est. Repair Price: $4,986.00 (est.)
🔧 Socapel 096-0012()

The Socapel 096-0012 is a programmable logic controller (PLC) used in industrial automation systems. It is designed to control various processes and machinery by executing specific tasks based on input signals. Key features of the Socapel 096-0012 include a compact design, multiple communication ports for connecting to other devices, and a user-friendly programming interface. It is also known for its high reliability and durability in harsh industrial environments. Typical failures of the Socapel 096-0012 may include issues with power supply, communication ports, or the central processing unit. In some cases, failures may be caused by overheating, voltage spikes, or environmental contaminants. Regular maintenance and proper troubleshooting techniques are essential to ensure reliable operation of the Socapel 096-0012.

  • Part: 096-0012
  • Est. Repair Price: $2,050.00 (est.)
🔧 Socapel 096-0012 (Unknown)

The Socapel 096-0012 model is a programmable logic controller (PLC) designed for industrial automation systems. It features a compact design, high processing speed, and a variety of I/O modules for flexible customization. Typical failures in this model include power supply issues, faulty communication modules, and programming errors leading to malfunctioning logic sequences. Regular maintenance and thorough testing are recommended to ensure optimal performance and reliability.

  • Part:
  • Est. Repair Price: $3,408.00 (est.)
🔧 Socapel 096-0007 (Unknown)

The Socapel 096-0007 is a programmable logic controller (PLC) commonly used in industrial automation systems. It features a compact design, high processing speed, and a wide range of input and output options for interfacing with various sensors, motors, and other devices. Typical failures include power supply issues, communication errors, and input/output module failures. Diagnosis and repair may involve testing and recalibrating the modules, as well as checking for loose connections or faulty components.

  • Part:
  • Est. Repair Price: $3,754.00 (est.)
🔧 Socapel 096-0010()

The Socapel 096-0010 is a digital input module used in industrial automation systems. It features 16 channels for receiving digital input signals. Typical failures in this device include short circuits in the input channels, faulty connection points, and damage to the input circuitry due to voltage spikes. Regular maintenance and careful handling can help prevent these issues.

  • Part: 096-0010
  • Est. Repair Price: $1,750.00 (est.)
🔧 Socapel st1-80-310 (Unknown)

The Socapel ST1-80-310 is a DC motor drive used in industrial applications for controlling the speed and torque of DC motors. It features a compact design, high efficiency, and robust construction suitable for harsh industrial environments. Typical failures include power supply issues, faults in control circuits, and component failures due to overheating or voltage spikes. Troubleshooting involves thorough inspection of components, testing of control signals, and monitoring of power supply voltages. Regular maintenance is recommended to ensure optimal performance and prevent costly downtime.

  • Part:
  • Est. Repair Price: $4,028.00 (est.)
🔧 Socapel ba3-75-200 (Unknown)

The Socapel BA3-75-200 is an industrial power supply unit designed to convert AC electrical power into regulated DC power for various electronic devices. This model is known for its high efficiency and robust construction, making it suitable for demanding industrial applications. Typical failures in this device may include component degradation leading to voltage irregularities, overheating, and power surges. Regular maintenance and timely replacement of faulty components are essential to ensure the optimal performance and longevity of the Socapel BA3-75-200 power supply unit.

  • Part:
  • Est. Repair Price: $5,502.00 (est.)
🔧 Socapel sam-da-400-07b-p4n-f (Unknown)

The Socapel SAM-DA-400-07B-P4N-F is a servo drive designed for precise control of motors in industrial automation applications. It features a compact design, high precision positioning, and a wide range of communication interfaces for seamless integration with various control systems. Typical failures with this model include power supply issues, communication faults, and problems with motor feedback devices. Proper maintenance and troubleshooting procedures are crucial for ensuring optimal performance and longevity of the device.

  • Part:
  • Est. Repair Price: $5,558.00 (est.)

Comments for Socapel

15 comments found.
📝 Andrew said:
Dear Sir! Sorry for the wrong e-mail address! This one is correct.The following problem has been occuring quite often on one of our machines for some weeks. One Socapel SAM-drive (SAM-DA-400-14N-P1N-D) stops the whole machine and displays 7 and F characters on its 7-segment display. At this time the PAM-controller (PAM-S1N-L4E-AP V10000)displays 0780F020 but the SIEMENS S5-115U PLC has no fault. This problem with the SAM can be reset by the PAM or restarting the PLC. According to the PAM-SAM Troubleshooting Guide fault code F means Main CPU fault (fault handler). Which CPU does this refer to, SAM, PAM or PLC? What else can cause this problem and what we can do, before replacing something? Unfortunately, we do not have any software tools for checking the PAM-SAM system, only for the CPU. Waiting for your quick reply on e-mail... Sincerely Yours
➡️ Reply Socapel
        
📝 M.Saleem said:
The following problem has been occuring quite often on one of our machines for some days. the PAM-controller (PAM-P1N-H8F-AP-P V10810)displays 0B80E002 but the SIEMENS S7-315-2DP CPU has no fault. bUT MACHINE STOP, WHILE ALL THE SAM (SAM-DA-400-07N-P4N-E) ON 1 This is SAM Normal State.what is the cause of this problem and what we can do, before replacing something? Unfortunately, we do not have any software tools for checking the PAM-SAM system, only for the CPU. Waiting for your quick reply on e-mail... Sincerely Yours
➡️ Reply Socapel
                
📝 Abrar Hussain said:
The following problem has been displaying quite often on one of our machines for some days. the PAM-controller (PAM-P1N-H8F-AP-P V10800)displays 0B80E003 but the SIEMENS S7-315-2DP CPU has no fault. but MACHINE STOP, WHILE ALL THE SAM (SAM-DA-400-07N-P4N-E) ON 1This is SAM Normal State.what is the cause of this problem and what we can do, before replacing something? Unfortunately, we do not have any software tools for checking the PAM-SAM system, only for the CPU. Also we are facing problem 2b on our SAM unit of main Blanket motor . It happens many times in a week.Please advice.Waiting for your quick reply on e-mail... Sincerely YoursAbrar
➡️ Reply Socapel
                        
📝 Adem Ceyhaner said:
Dear Sir ;We have faced with the same problem you mentioned.the first problem is because of the PAM and we could not get rid of the problem.The second problem is because of the Blanket motor you should change the motor beacuse 2b means overcurrent. We have faced with the same problem and solved the problem with changing of the blanket motor.Good luck.
➡️ Reply Socapel
                                
📝 IMRAN MIAN said:
Hi Dear, My Machine installed Pam drive but display show ERROR 0B80E002.plz send error means or send any manual best regards,Imran Mian+92 300 2428847
➡️ Reply Socapel
                                        
📝 Rashidul Hasan said:
Hi Dear,My Machine installed Pam drive but display show ERROR 680F005.plz send error means or send any manual Thank youRashidul HasanElectrical EngineerNoman Group of industries.
➡️ Reply Socapel
                                                
📝 tariq mehmood said:
we Face problem in our pam Error code 0B80E010. Please help us in this matter.
➡️ Reply Socapel
                
📝 Ersin Ak said:
Dear Friendswe need 1 pc. Socapel PAM-P1N-H8F AP-P V10600. If you have one of this Type, please contact us as soon as possible and give your offer.Best RegardsErsin AK
➡️ Reply Socapel
                        
📝 reza said:
hican you repair a pam for us.if yes email to me.thanks reza
➡️ Reply Socapel
                                
📝 sohail umer said:
sam and pamp quotation required
➡️ Reply Socapel
                                
📝 amjad said:
i want a troubleshootin manual of sam drive
➡️ Reply Socapel
                
📝 mike said:
Could I get a list of error codes for this model? I have an error 25 or 52. I also have a pam to plc link lost. all other drives have no error.
➡️ Reply Socapel
                        
📝 shahzad said:
sam-da-400-07n-p4n-e-------------------------------------------------------------------------------- Posted by mike on Tuesday, November 11 2008Could I get a list of error codes for this model? I have an error 25 or 52. I also have a pam to plc link lost. all other drives have no error.
➡️ Reply Socapel
                
📝 ALEKSANDER said:
I have a problem with SAM DA 400-07N-P4N-E on can-bodi line SOUDRONIC.Its alarm 06XXF00E after one hour work.May I resolved this problem ?How much cost this new device?
➡️ Reply Socapel
                
📝 Wilson Gasch Junior said:
Do you have some representative in Brazil? I have SAM and PAM units in my machine who needs to be repaired.Im waiting for your answer,Best regards,Wilson
➡️ Reply Socapel
                        
📝 Brendan said:
Hello;We need Socapel SAM and PAM for our machinery as spare parts. If you have or you know the source from where we can get, please let me know at my email addresss; sparesformachines@gmail.com.Would appreciate your prompt response. Thanks.
➡️ Reply Socapel
                        
📝 cesar viglianco said:
um socapel motorista Ola Eu tenho sam-da-400-07n PRN-em506l conectado a um nuebo motor 0r0d-0029-0 quando desistir de erro resover da-nos acreditar que nos deve sintonizar o motor com o driver.E possivel facilitar o software(ferramentas SAM)
➡️ Reply Socapel
                
📝 Adem Ceyhaner said:
To Whom that may concern;We have one Socapel PAM Unit which is defecetive and gives error like 0080EE21, 0B80E002 etc.Please let me know that have ever repaired this Unit or not.I am waiting for your helpBEST REGARDSADEM CEYHANERMENDERES TEKSTIL AS / TURKEY
➡️ Reply Socapel
        
📝 Tahir Hussain said:
Dear,I am looking for following SERVO controllers made by DANAHER MOTION:SAM-DA-400/480-07B-P5N-G (Part # 9032012567)SAM-DA-400/480-14B-P4N-F (Part # 9032010563)Rgds, Tahir Hussain
➡️ Reply Socapel
                
📝 mustafa colak said:
socapel-sam smart axis manager SAM-DA-400-50N-P4N-E SAM-DA-400-07N-P4N-ESOCAPEL POWER SUPPLY SAM-PA-400-80-ESOCAPEL-PAM PAM-P1N-H8F-AP-P V10810
➡️ Reply Socapel
                        
📝 mohamed habib said:
dear sir please send us the availability of inverter power socapel for welding machine for can of tin-plateTHINK YOU BSET REGARD
➡️ Reply Socapel
                        
📝 Rashidul Hasan said:
Dear sir,I would like to inform you that i want to purchase socapel-sam smart axis manager SAM-DA-400-50N-P4N-E 01 pcsIf you have this device pls send your Quotation or offer.Thanks Md.rashidul HasanElectrical EngineerNoman Group of industrieswww.nomangroup.comemail: rashidul@znzfab.com
➡️ Reply Socapel
                                
📝 Nisitha said:
I would be grateful if you could let me know the availability of scapula SAMSAM-DA-400-50N-P4N-E Nisitha Warnakulasuriya
➡️ Reply Socapel
                                
📝 Nisitha said:
I would be grateful if you could let me know the availability of scapula SAMSAM-DA-400-50N-P4N-E Nisitha Warnakulasuriya
➡️ Reply Socapel
                        
📝 Md.Rashidul Hasan said:
Dear sir,I would like to inform you that i need socapel-sam smart axis manager SAM-DA-400-50N-P4N-E Drive if this drive is your collection please inform me with price and conditionThank you very much.Md.Rashidul HasanElectrical EngineerZaber & Zubair Fabrics Ltd.mob: 01746399155,01911397522Email: rashidulhm@gmail.com rashidul@znzfab.comWeb: www.nomangroup.comSkype: rashidul
➡️ Reply Socapel
                        
📝 abid said:
i need a SAM-DA-400-50N-P4N-E PLEASE ADVISE IF YOU HAVE AVAILABLE AND WHATS THE PRICE OF THIS.
➡️ Reply Socapel
        
📝 ADEM said:
We face with the problem that is about communication between PAM and SAM drives. We have S7-300 PLC, 1 PAM and 13 SAM Drives. During running the machine we face a error Head Communication Error(head means SAM drives for this machine) and we observed followwing error on the PAM 0B80E002,0B80E003 or 0B80E01F.We think that this problem is because of the PAM.My question is how can i repair this PAM and Where i buy PAM from.please respond us as soon as possible
➡️ Reply Socapel
        
📝 David Stanton said:
I have a Socapel 25-310 ac drive that is giving us a #6 fault code on the display and we do not have a listing for that fault.
➡️ Reply Socapel
        
📝 TaceCertieree said:
Hello, i newbie, anybody can help me?
➡️ Reply Socapel
        
📝 Addiniamync said:
I need a driver for my phillips snn6500 wireless netcardor smc2632 wireless net cardI cant make them run on linpus linux liteplease helpregardsAddiniamync
➡️ Reply Socapel
        
📝 Leo said:
With have a problem wiht the sam, tha alar is 2t, corresponding in the manual a problem with the temperature in the motor, but also say wit is posible tha sam is bad. I change the unit and program and continue with the sim error, what is your oppinion, thanks
➡️ Reply Socapel
        
📝 JACKELINE said:
SERVO SOCAPEL AMPLIFIER ST1 /80/310 YNO 9032011677
➡️ Reply Socapel
        
📝 hussnain said:
i want to take sam drive to running condition without connecting pam.please help me Thanks hussnain
➡️ Reply Socapel
        
📝 jaswant said:
dear sir servo drive manual sam-da-400-07 n-p4n- e modal . tests& services ,repairs manual pdf file Please sand my email address. Thanks.
➡️ Reply Socapel
        
📝 Wasim Abbas said:
Dear Concern, Please see under below detail then quote rate and also share performa invoice now on first priority.1)SAM-DA-400/480-07N-P4N-E 06 PcsIm waiting your Quick and positive reply
➡️ Reply Socapel
📝 Mustafa Çolak said:
i have a socapel sam-da07 unit to sell
➡️ Reply Socapel
📝 JAFFAR said:
The Socapel ba3-75-200 is malfunctioning with an unknown issue affecting the production line. Urgent action is needed to diagnose and resolve the problem in order to minimize downtime and restore operations swiftly. Please allocate resources to address this critical situation
➡️ Reply Socapel
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.