Welcome to T

unofficial service & repair forum

We repair a wide range of T Equipment.

Ask questions, or call 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.


Why to send us your work?

To receive more information about your unit then fill out the email form below
and we will be in contact with you within 24 hours.

🛠️ Common AI Repair Summaries 🏭

🔧 T N Technology 886569(Unknown)

The T N Technology 886569 is a multi-functional electronic tester used mainly for testing electronic components and circuit boards. It features a wide range of test modes including resistance, capacitance, inductance, and diode tests. The device also has an integrated LCD display for easy reading of test results. Common failures of the T N Technology 886569 include display malfunctions, faulty test leads, and inaccurate test readings. It is important to regularly calibrate and maintain the device to ensure accurate testing results.

  • Part: Technology 886569
  • Est. Repair Price: $1,200.00 (est.)
🔧 T S Display Systems 800059(Unknown)

The T S Display Systems 800059 is a digital display unit commonly used in industrial applications. It features a large LED screen for clear visibility of data and parameters, and it is designed to connect to various control systems for real-time information display. Typical failures in this model may include LED component burnout, power supply issues, or communication errors. Repairing these failures often involves replacing faulty components, troubleshooting circuitry, and ensuring proper connections for reliable operation.

  • Part: Display Systems 800059
  • Est. Repair Price: $2,528.00 (est.)
🔧 T N Technology 885813(Unknown)

The T N Technology 885813 is a high-precision multimeter designed for industrial electronic measurements. It features a wide range of measurement capabilities including voltage, current, resistance, and capacitance. The device is equipped with a large LCD display for easy reading and has built-in safety features such as overload protection. Common failures with this model include display malfunctions, inaccurate readings, and issues with the rotary switch. Regular calibration and maintenance are recommended to ensure optimal performance.

  • Part: Technology 885813
  • Est. Repair Price: $1,654.00 (est.)
🔧 T N Technology 886292(Unknown)

The T N Technology 886292 is a digital multimeter used for testing voltage, current, and resistance in industrial electronics. It features a large LCD display, various measurement ranges, and a sturdy design suitable for harsh working environments. Common failures include issues with the display, connection ports, and measurement accuracy due to internal component failure. Regular calibration and maintenance are recommended to ensure accurate readings and prolong the device's lifespan.

  • Part: Technology 886292
  • Est. Repair Price: $1,216.00 (est.)
🔧 T and R Electronic d-7218(Unknown)

The T and R Electronic d-7218 is a digital multimeter designed for industrial use. Its purpose is to measure various electrical parameters such as voltage, current, and resistance. This model features a large digital display, multiple measurement ranges, and selection buttons for easy operation. Typical failures with the T and R Electronic d-7218 may include issues with the display, malfunctioning selection buttons, inaccurate measurements, or damaged probes. It is important to check and calibrate the device regularly to ensure accurate readings and proper functionality.

  • Part: R Electronic d-7218
  • Est. Repair Price: $2,002.00 (est.)

Comments for T

104 comments found.
📝 john scoggins said:
We are experiencing a critical issue with the circuit board on our Todd Engineering ts30, resulting in a complete halt to our production line. Urgent repair is needed to avoid further delays and disruptions. Please prioritize this service request to get our operations back up and running swiftly.
➡️ Reply Todd Engineering
📝 Donald Albin, Maintenance Dept. said:
I have a defective light as described above. Can you either repair this light or supply us with a replacement? Thanks
➡️ Reply Techmalux
        
📝 Sales said:
There are many different versions of the TECHMALUX HALOGEN LAMPS SE-418, SE-436, KE-418, KE-424, KE-436, etc Do you have a model number for the unit?
➡️ Reply Techmalux
                
📝 Scott B. said:
I would like to know a price on a techmalux light #591-054-006, KE /418, 24 vdc/18w. Thank You.
➡️ Reply Techmalux
                        
📝 Stanley E. Goodman said:
We are a state school and have a Charmilles wire EDM machine. It has a Techmalux light assb. # 591-034-003 (other numbers,D-78727, SE/418, IP67) We have repaired it a couple of times but it has started to leak and has stopped working. I was looking for a replacement cost. As you probably know it is a 24VAC, 24, 18 watt florescent Bulb.Thanks,Stanley Goodman615-741-1241
➡️ Reply Techmalux
                        
📝 eduardo murga tome said:
se me ha estropeado una tarjeta electronica de un fluorescente estanca de 24 v corriente alterna necesitaria una de repuestola referencia que tiene la tarjeta es la siguiente485-000-04724 vac/18 wnr-4353
➡️ Reply Techmalux
                                
📝 Andreas Reiter said:
We are distributor of Techmalux.Do you still need this light??Best regards,Andreas ReiterFNF Industrietechnik GmbHHuelsmeyer Str.: 32D-49406 Eydelstedt / Germany Tel.: +49 (0) 5442-804798-0Fax: +49 (0) 5442-804798-20E-Mail: Info@FNF-Industrietechnik.com
➡️ Reply Techmalux
                        
📝 Lucia Valdez said:
HelloPlease quote on pricing and availability on Techmalux Lomolux light # 591-019-014 for 1pc.Thank you,Regards,Lucia ValdezOMA IndustriesTel. 956-454-2599Fax 956-424-3969
➡️ Reply Techmalux
                        
📝 Aldo G. Quilang said:
Specifcation;Lumolux-K220vac 36WArt. Nr. 960 036 301
➡️ Reply Techmalux
                        
📝 Dan deMackiewicz said:
We have about 47 machines with KE/418G 24 V DC lights in them.We are having a problem with a light that goes out after several hours of operation.Is there a part we can buy to fix this?
➡️ Reply Techmalux
                
📝 Miroslaw Bator said:
Advise price and delievery time for new light fixture, LUMOLUX KE/418 24VDC/18W art. no- 591-054 006How much would cost to repair an old one?Please advise A.S.A.P
➡️ Reply Techmalux
                        
📝 David said:
What is the cost for a Lumllux KE/418 glass tube that protects the light bulb and fixture?Regards,Dave
➡️ Reply Techmalux
        
📝 GLEN TAYLOR said:
CAN YOU SUPPLY THE 70mm GLASS TUBE FOR A TECHMALUX LAMPLUMOLUX KE/224 591 049 024REGARDS,GLEN
➡️ Reply Techmalux
📝 Judy Marshall said:
Can you tell me if you have repaired Takuma items? I have a Motor Driver Card part number 00529, and a Motor Driver part number DR24V.Thank You,Judy Marshall
➡️ Reply Takuma Seiko
📝 Wilco Stroo said:
Texas Instruments 505-4916-a not powering on. Need immediate repair assistance.
➡️ Reply Texas Instruments
📝 Jon Tylock said:
I am interested in replacing this light. Please, send me pricing and availability information. Thank you.
➡️ Reply Techmalux
📝 Bruce Cunningham said:
my SYBRON-TAYLORhas stopped recording the correct speed--at low wind speed the indicator wiggles only a small amount---at high wind speed it moves only slightly up the scale---the cups seem to rotate at different speeds ie as the wind builds to higer speeds the cups rotate faster---as best i can tell like they always have for the last 30 years(ie the unit doesnt owe me anything)-----is there anything i can check/repair short of sending the unit to you or buying a new indicator???? i have checked the flow of current between all connections--seems OK but i dont know what it should be??? my ACV lowest seting is 10---meter shows nothing????-----hope you can give me some good advice---thank you in advance for whatever you can suggest----bruce cunningham
➡️ Reply Taylor Electronics
        
📝 James S. Chatfield said:
The weathervane rod bent due to some unknown reason and when I took off the top I noticed the vectical shaft was also worn very bad. Do you sell the whole package that sits on top of the roof? The machine was in for repair back in 12/17/82, bought in Sept of 73. Rough weather up here near Rochester, NY where Taylor Instreuments was born. Thank you,James S. Chatfield
➡️ Reply Taylor Electronics
                
📝 David R. Watson said:
I would like to know if I can purchase the roof unit ( wind/speed indicator and wire )for the 3108 Weatherscope or if I can use a different/more current model that will work as well. I was given the Weatherscope, but I cannot access the weather/wind vane at this time. Thanks, any other info. on this unit would be most appreciated ( Manuals, etc.)David Watson
➡️ Reply Taylor Electronics
                        
📝 Jeff said:
David,I too have become the owner of an older 3108c Weatherstation. I was fortunate enough to get the instruction booklet with it, but like you, I have no roof unit to feed it a signal.Ive looked around the Internet to no avail and wondered if you ever found a source for one?Thanks in advance for any help you can provide.Jeff
➡️ Reply Taylor Electronics
                                
📝 Bill Rizzo said:
Hi Jeff I, also have a Taylor Weatherscope. Im missing the Anemometer & Wind Direction unit. Can you PDF the Booklet that came with your unit? Thank you for your time. Bill of Magic Lantern Productions........Cheers !
➡️ Reply Taylor Electronics
                                        
📝 Tom Boscarino said:
I have a NOS Weatherscope 3108 new in the original box. Has never been unpacked or installed.I would like to sell the whole unit. Will take offers.Tom
➡️ Reply Taylor Electronics
                                                
📝 TomR said:
Hi:I am trying to repair/replace my Weatherscope but I do not know what a 3108 looks like. Mine is in a chery case and has 4 guages; Barometer, Thermostat, Wind Speed, and Wind Direction.Thanks - TomR
➡️ Reply Taylor Electronics
                                                
📝 TomR said:
How do I contact you to discuss purchase? I am interestedthanks - TomR - 215.589.0686
➡️ Reply Taylor Electronics
                                                        
📝 Brian Heneghan said:
I own an original Taylor Windscope Wind Vane w/ original Wind Direction indicator.After 30 years of service it needs to have the distributor unit either replaced or rebuilt ( currently does not show direction NE thru SE quadrant.What can you do to help ?
➡️ Reply Taylor Electronics
                                                
📝 don keating said:
Hello. Did this unit ever sell? Im interested!
➡️ Reply Taylor Electronics
                        
📝 Ray Orobona said:
I am looking for the anamometer cups of the above Taylor weatherscope. One of the cups broke in transit and I need a replacement for only the three cup assembly...not thr bottom sender..However,if I have to purchase the entire assembly I would gladly do so.Thank you,Ray Orobona
➡️ Reply Taylor Electronics
                        
📝 Don Havener said:
I have a complete station that was purchased new in 1976 and never used. Is there a market for such an item?
➡️ Reply Taylor Electronics
                                
📝 william gabriel said:
I would be extremely interested in your weaterscope if you still have it. I had one and would love to have a replacement for it.....Bill
➡️ Reply Taylor Electronics
                                        
📝 justin said:
I have a new weatherscope still in box. Call and make an offer 603 608 9670
➡️ Reply Taylor Electronics
                        
📝 Julian said:
Do you sell, or tell me where I can get parts.Thank you
➡️ Reply Taylor Electronics
                                
📝 Tom Whelan said:
Hello:I have acquired a Weatherscope by Taylor (wooden box with 4 gauges) Brand new, never used. It has all the parts except the wind vane for direction.Do you sell them? if not, I cant seem to find a picture of it so I can fabricate one for this unit.Great looking older unit, would love to get it up and working.Thank You!Tom Whelan
➡️ Reply Taylor Electronics
                
📝 darren said:
we are looking for parts that go from the back of our barameter to the tower. it is a old unit. The only thing I see on it is model E weatherscope by Taylor. It is a wind guage, wind direction, temp and barameter. Thanks for your help. Darren
➡️ Reply Taylor Electronics
                
📝 Sam said:
I have a Weatherscope by Taylor and the temperature probe is intact and works great, but the wind speed/direction thingie is gone. I have plentry of wire - nothing to connect it to.Can you help me find a new wind thingie?Sam
➡️ Reply Taylor Electronics
                
📝 Leo McCarthy said:
Have an old? Taylor Weatherscope (cannot find a Model Number) made by Taylor Instrument Company Rochester USA. Has four separate gauges - Max/Min temperature, Barometer,wind speed and wind direction set in a solid wooden cabinet. Cable linking weathervane and wind speed indicator to instruments has been cut. Can you help re rewiring. Can you help re vintage and history of the instrument.Many thanksLeo
➡️ Reply Taylor Electronics
                        
📝 Deb McLaughlin said:
I have the same thing as Leo. My Dad was a weatherman for the County and I inherited this. I would love to use it but I know nothing about wiring. My cable linking the weatervane and wind speed is also cut. There is a very long wire with a metal rod on the end..not sure what that is for. Can anyone give me any information? Im not mechanical but I willing to learn.Thanks Deb
➡️ Reply Taylor Electronics
                
📝 Thomas J. Vogelpohl said:
Re; Taylor Model 3108A repair person at my home has severly damaged my external thermometer prob/bulb and has also severed the 5-strand ribbon cable which connects the wind-speed/direction unit to the main guage panel. Are there any replacement prob/bulbs and ribbon cables? Is there a 5-pin connector which could be crimped to each cable end to permit reconnection? I am concerned about weather effects on any repair, too.Thank you for any guidance you can offer.Tom Vogelpohl513-232-0356
➡️ Reply Taylor Electronics
                
📝 John Tucker said:
Hello, Is it possible to purshase a weatherscope or the entire roof mount with the speed and wind direction?Best Regards,John Tucker
➡️ Reply Taylor Electronics
                
📝 john kolodzie said:
need to replace entire speed cup assembly that fits on shaft.please, advise.
➡️ Reply Taylor Electronics
                
📝 Gerald Wilgus said:
Do you have a speed cup for a 3108C assembly or do I have to buy the total roof replacement?Thank you.
➡️ Reply Taylor Electronics
                
📝 John Bouse said:
I have a Taylor Weatherscope but I need the outdoor parts.Are those available?
➡️ Reply Taylor Electronics
        
📝 Matt Sloan said:
After reading your comments about your sensor, I realized the magnet may be one of the culprits on this issue. Over time moisture accumulates in the magnet and may weaken the field to the induction coil. The induction coil in the Taylor anemometer heads are often weakened by time - temp changes etc. 30+ yrs of use. The coil end braids come undone, but yours is still reading out. There are also two capacitors in the back of the meter and they sometimes lose charge during wind lulls. There are also two adjusting potentiometers in the back of the meter. These can calibrate the windspeed. I find taking a small 6v battery sometimes fills the capacitors back to full thus making the windspeed work again. Just make sure if you do this, to do it momentarily and without the generator unit attached. The Taylor also has a rubber piece in the center of the magnet, make sure it isnt rubbing the bearing plate, it slows the cup operation. You might want to consider a set screw in the outer cup hub, Taylor windspeed generators have a tendency to blow off during windstorms. I have had several 3107s. They are quite accurate if maintained. -Matt
➡️ Reply Taylor Electronics
📝 claeys said:
Hello, it sounds like there may be an issue with the Todd Engineering PC55A battery charger/power supply. The symptoms reported include the unit not turning on and no power output. Please check the power source and connections as a first step.
➡️ Reply Todd Engineering
📝 Mike Brooks said:
Dear Sir or Madam,We are looking for a supply of lights for a MAHA MOT lift.The light package is numbered: 4967 and is a 4 light tube. The lift is a 4 post 3.5tPlease supply delivery & price in sterling.Thank you,Mike Brooks
➡️ Reply Techmalux
📝 Le Hai Duong said:
Dear sirs or madam, As first, let us introduce our-self.Our company is a Joint venture between Asea Honda (Thai partner), Machino Import Corp. (Vietnamese partner),Showa Corp., and Itochu Copr. (Japanese partners). Our activity field is producing parts for motorcycle. Now our butt welder machine had got troubles (the tranformer and motor to be breaked down), But we have not got diagram electric. Please send for us diagram electric. Information about machine: Model: TH-20 Maker: Tokyo shindenki Co., Ltd. Input: 200/220V 50/60Hz Max capacity: 4 KVA Steel size: 3-16M/M MFG No: JCE 18177 We are looking forward your reply. Thank in advance Hai Duong Maintenance section Machino Auto Part Co., Ltd
➡️ Reply Tokyo Shindenki
📝 John Landua said:
I am looking for a Tracor Westronics DDR 10 System Manual. Do you have one or know where I can find one? I would be happy to pay to have one copied. I need to figure out how to move data to a PC system from an existing DDR 10 on site, and cannot find a manual in our shop or engineering library.Thanks!
➡️ Reply Tracor Westronics
📝 Richard Kolb said:
Having issues with my TDE Macno OSC06N10X drive not responding to control inputs. Need assistance with diagnosis and repair ASAP.
➡️ Reply Tde Macno
📝 ZEESHAN said:
We have a machine called DESMA from Germany . HAving a TPU pouring head whcih has TEMPOSONIC position Sencor with following details;Serial Number : RHM 0300MD701S2G4100RANGE 0.1mm / 24 bit gray.GRD: 2782.06 M/SF.NR: 04303162.The above Sencor is not working , And red light is blinking ,so the operation connected with this censor is not working . You are requested to please quote for the replacement and advise how early it can be despatched .We can pay you by CREDIT CARD or Anyother means you want.PLease advise urgently Thanking you Zeeshan
➡️ Reply Tempsonics
📝 GARY MACEY said:
We have a machine with a ke/418 model lamp fitted. Is there any uk based suppliers that we can contact to repair/purchase a new lamp.best regardsGary MaceyMacvere Engineering Ltd
➡️ Reply Techmalux
📝 Noel Declaro said:
I would like to know if you can repair the above mention PCB? How long it take to repair and how much it will cost?
➡️ Reply Tajima
        
📝 CARLOS MARTINEZ said:
I HAVE A TMEF-H612 EMBROIDERY MACHINE THAT ITS X/Y CONTROLLER IS DAMAGED AND I WANT TO KNOW IF YOU CAN REPAIR THIS BOARD AND HOW MUCH IT WILL COST.
➡️ Reply Tajima
📝 Gary Vodvarka said:
I need to know if you still repair these boards. Gary
➡️ Reply Therm-L-Tech
        
📝 David Borchert said:
I have a Freezer door with a cicuit board of some type in it made by a compnay called Therm - L - Tec. I cannot find any information on this door manufacturer. I think they have gone out of business. We have several places on the circuit board that are bad. Can these be repaired? Please Respond by Email or Call me at 479-445-4130. Thank You,David Borchert
➡️ Reply Therm-L-Tech
        
📝 Peter Albrecht said:
We used to develop some electronics for Therm L Tech in Kansas City Kansas.If you have any problems please contact us via email at 808 - 227 - 7957Boards which have only relays where not manufactured by us, but we can service them.If you want to contact us via e-mail: thermltech@ihtltd.comP.S. We will be relocating North West Arkansa from Hawaii in about June/July of 2007. The above phone number will change at that time, but the e-mail will remain the same
➡️ Reply Therm-L-Tech
                
📝 Mike Weber said:
I am looking for a replacement push button in handle of door. Please contact me. I assume I need to drill out rivets on handle to replace button.
➡️ Reply Therm-L-Tech
                
📝 Steven Cole said:
Peter, I just wanted to say hello, I was the original owner of Therm-L-Tec Systems. Just wanted to let you know that we are in the planning stage of getting back in to business.
➡️ Reply Therm-L-Tech
📝 Dawn Hoff said:
WE HAVE TWO TECA MODEL M MACHINES THAT NEED REPAIR. SERIAL # B131804.
➡️ Reply Teca
        
📝 mark said:
we need a teca synergy stimulator repaired can you help?
➡️ Reply Teca
        
📝 Naseem shekhani, MD said:
I have a service contract with CARE FUSION which services TECA machines and I like to know if you do repairs and give service contract also.How does it work in your company and where about you are located in USA.Shekhani
➡️ Reply Teca
📝 Frank Taylor said:
We need a manual for the Teijin Seiki AR60 drive.Thanks
➡️ Reply Teijin Seiki
        
📝 KENNY SMITH said:
FRANK TAYLOR, IF YOU STILL NEED IT, I HAVE A COPY OF THE AR60 OPERATION MANUAL ON MY COMPUTER. I AM CURRENTLY HAVING TROUBLE WITH MINE AND WAS ABLE TO GET ONE FROM MY MACHINE MANUFACTURER. I WILL GLADLY EMAIL IT TO YOU. IT IS 170 PAGES LONG SO AN EMAIL ADDRESS WITH A LARGE CAPACITY IS NEEDED FOR ME TO SEND IT TO YOU. I HOPE THIS HELPS.KENNY SMITH
➡️ Reply Teijin Seiki
                
📝 Ricardo Villada said:
HelloI need a manual for ani AR vigo servo (best for ARS30).Tank you
➡️ Reply Teijin Seiki
                        
📝 duc quang said:
Can you please send me manual for vigo sevo ARS30
➡️ Reply Teijin Seiki
                                
📝 A. Enrique Soto said:
i need a list of code error or user manual of VIGOSERVO ARS 30.in the display appear the code E 09 ? and then cycle stop.if this possible im greateful for delivery quick.thanks for your attention.
➡️ Reply Teijin Seiki
                                
📝 narinder singh said:
Dear Sir/Madam We Have machine teijin seiki Which has drive named ARS-30 vigo servo is getting problem of Alarm E - 101 . Kindly Give us the Solution of that alarm as well as send us the manuals.
➡️ Reply Teijin Seiki
                                        
📝 Heah Tai San said:
Dear Sir/Madam, We Best Solution Machine Tools Dealing In Metal Working Machinery And Service In Malaysia, We Face A Problem In Repairing The Magazine For Okuma&Howa Millac 511V. The Magazine Can Not Stop, Kindly Can You Tell Us How To Solve This Problem, What Is The Parameter No. For Magazine Orientation. Can You Send Us A Manual For Vigo Servo ARS30 Servo Drive. Thanks
➡️ Reply Teijin Seiki
                
📝 Dave Keeton said:
If you still have a copy of that manual I could sure use it...... Dave Keeton
➡️ Reply Teijin Seiki
                        
📝 Antonio Perrotta said:
Dear SirsI need an ARS30 service manual Your help will be much appreciate.Many thanks Antonio Perrotta
➡️ Reply Teijin Seiki
                                
📝 BICOT Luc said:
Hi,I have an ARS15 and i need to put new parameters on it.I can read it but cannot write in the servo.Could you explain me the process to re-enter the parameters please !Thanks a lot and best regards.Luc BICOT
➡️ Reply Teijin Seiki
                
📝 Tom said:
We have purchased a used machine with an ar60 drive which we are having trouble with. I having been looking for the manual and found this thread. if you could send me a copy it would be greatly appreicated.Thank youTom T
➡️ Reply Teijin Seiki
                        
📝 ingouf said:
Hi,Is it possible to have a manual maintenance about a TELJI SEIKI drive model VIGO SERVO ARS60-15. Because i have an alarm E-14, or more explanation about this fault.thank you for your help.Best regardswilfrid ingouf
➡️ Reply Teijin Seiki
                                
📝 Victor Gonzalez said:
we have at least 50 OKK machines & these machine used in motors magazine a: VIGOSERVO ARS Model: ARS60-15 Power: 1.5 Kw AC input 200-300V 50/60 hz Out Put 10.6A max 31.8 A Teijin Seiki Co. Ltd. Serial: 800023
➡️ Reply Teijin Seiki
                                        
📝 Jay Carr said:
We have this code on our ARS15 :E-109 and it is not listed in our manual.The controller to the machine Shizouka sv-4020 has this alarm message: no. 2063ATC servo alarmMagazine servo alarmI would like to know the problem and how i could trouble shoot it with out any extended down time.
➡️ Reply Teijin Seiki
                                
📝 Victor Gonzalez said:
We have at least 50 OKK machines working with a Vigo servo ARS for motor magazine control. We have at least 3 of them damaged but now we have a machine down because we dont have any more spare.Could you possible to help me with a quotation and your best delivery time for a new one & also for reparation of all the 3 that we have damaged. VIGOSERVO ARS
➡️ Reply Teijin Seiki
                                
📝 MANUEL PARTIDA said:
LOOKING UNIT MODEL VIGOSERVO ARS60-15 AND IF YOU HAVE A MANUAL FOR THIS UNIT PLEASE
➡️ Reply Teijin Seiki
                                
📝 KETAN GAJJAR said:
Dear Sir,We are lloking for above servo mannual.Pl. send me the same if you have.True regards,Ketan Gajjar
➡️ Reply Teijin Seiki
                                
📝 Gianni Campanello said:
Good morning,My name is Gianni Campanellol,I have a vigoservo, with display E14.I downloaded manuals from the internet, but can not find information E14.I ask for help for problem solution.1000 Thank you.
➡️ Reply Teijin Seiki
                                        
📝 LEEGIN said:
alarm details vigo servo ARS6O E14 E3 E4 Pls details for alarm and solve it
➡️ Reply Teijin Seiki
                                
📝 Khoa Tran said:
Hello,I have Vigo Servo ARS15-06 now It alarm E-109 I have not the Manual Please help me for alarm E-109.Thank you very much.Khoa Tran.
➡️ Reply Teijin Seiki
                                
📝 SUNG MO KANG said:
Hi,We have some technical problem about VIGO SERVO ARS60-15. I have an alarm E-3, when tools are changing. If you have any solutions or manual book, please help me to solve this problem. In addition, if you have manual book or a file of the manual, i might be able to buy it.Thank you for your service.Best regards,Sung mo Kang.
➡️ Reply Teijin Seiki
                                
📝 ARUN UPANAL said:
list of alarm 1. E101 & E105 2. E2
➡️ Reply Teijin Seiki
                                
📝 Sankar kannan said:
25 drive alaram number
➡️ Reply Teijin Seiki
                        
📝 Victor Gonzalez said:
We have at least 50 OKK cnc machine working with VIGOSERVO ARS as a motor magazine control, and now we have 3 damaged & we have a machine down because we dont have any more spares: Could you possible to send me a quotation and your best delivery time for a new one? Could you possible to help me with a quotqation for repair all the 3 damaged?Could you send me a technical documentation, because it seem to lost origin but we dont have any error in the vigoservo displayVIGOSERVO ARSModel: ARS60-15Power: 1.5 KwAC input 200-230V 50/60 hzOut put: 10.6A max 31.8 ATeijin Seiki Co. Ltd.Serial: 800023Date: 1998.2
➡️ Reply Teijin Seiki
                
📝 Sam said:
Hi Im also in need of this manual desperately. If you could email me a copy it would be appreciated
➡️ Reply Teijin Seiki
                
📝 Agoes said:
We need Ar series manual for set the parameter on my drive teijin seiki ARS30, because the battery has dropped.thanks
➡️ Reply Teijin Seiki
                
📝 JIM WILLIAMS said:
I AM LOOKING FOR MANUALS FOR THIS POWER SUPPLY AND MOTOR. WE HAVE ONE ON TWO OF OUR MACHINES BUT HAVE NO BREAK DOWN ON THE PARTS OTHER THAN THE ALARM LIST AND PARAMETER LIST. CAN YOU HELP?THANKS, JIM WILLIAMS
➡️ Reply Teijin Seiki
                        
📝 ROLANDO said:
HI,Please quote forTeijin Seiki Servo Motor PN UPH 7S31-B10 1pcRegards,
➡️ Reply Teijin Seiki
                
📝 Cody Stamper said:
I know this post is old, but Im looking for the AR60 manual also. The servo set with no power for quite some time, batteries went dead, and now all of the positions are off. The only manuals I have are in Japanese.
➡️ Reply Teijin Seiki
                
📝 hiteshrana said:
yes i need it manual for my m/c .please sned this on my mail.My cell no.09540638378
➡️ Reply Teijin Seiki
                        
📝 leegin said:
i need it manual for vigo servo ars60 .please sned this on my mail
➡️ Reply Teijin Seiki
        
📝 KRIANGKRAI PHROMPAK said:
I NEED MANUAL FOR THE SERVO DRIVE TEIJIN SEIKI AR60 THANKS YOU
➡️ Reply Teijin Seiki
📝 Jeremiah Shem E. Santos said:
Hello There,This is Shem Santos, Mark Process Engineer of Amkor Technology Philippines. Would like to ask for your expert opinion in our quest to improve TPC 261 cure time from 1.5 Hrs to 1 hr. Out current temperature setting is 110 degrees celcius.If ever I opted for 1 hr for faster cycle time do i need to increase the mark cure temperature? Will this have an effect on the solderabitity? Pls advise ASAP.regards,Shem
➡️ Reply Tecaprint
📝 Holger Ploesser, Migona GmbH said:
Hello,we have 2 drives of the type DSCH 15N/B0, but no manual. We have to assemble them to a machine in about 2 weeks. On the homepage of the manufacturer there is no possibility to download a manual.Is it possible to get a manual from you via E-Mail? It´s urgent!Many thanks in advance.GreetingsH. Ploesser
➡️ Reply Tde Macno
📝 Gamal Perez said:
DEAR FRIENDA NEDD TO MANUAL CONTROLLER TELIND MOD DE4410BEST REGARD GAMAL PEREZ
➡️ Reply Telind
        
📝 Nuno Ferreira said:
Dear Sirs, I would like to receive the manual of the model MP011 from Telind manufacturer.Many thanksNuno Ferreira
➡️ Reply Telind
        
📝 Narong Wonghanchai said:
I buy the machine GARZATRICE Mod. PEGASO-X5/VE from COMET. Now it cant running . I saw in electrical drawing manual. I want to interview Mr. Simocini Simonewho signs in drawing to ask him Who can repair it.
➡️ Reply Telind
                
📝 ali niazmand said:
I buy the machine GARZATRICE Mod. PEGASO-X5/VE from italy iwant to have its user & repair manualwho can help methanks
➡️ Reply Telind
        
📝 Eduardo Palacios said:
saludos quiero programar un panel Cerberus Pyrotronic de Siemens MXL y no tengo el manual de programacion Podria alquien mandarmelo muchas gracias
➡️ Reply Telind
📝 Richard Torp said:
Looking for the clear plastic door that cover the chart paper. The manual we have does not provide a part number. The manual number is MO 100021-01. The cover is shown on page 5-17 figure 5-33.
➡️ Reply Tracor Westronics
📝 Araujoa Ramon said:
Hi:Let me know if you have for sale a copy form Tsudakoma Rotary axis wire electric conection diagrams (Anphenol conectors)Model: RN 150L or RN 150RPlease tellme how much is an how can to pay.Thanks
➡️ Reply Tsudakoma
📝 rolly north said:
I have some questions about the wiring diagram. I am using my takagi tk1s for experimental purposes and was wondering if I could modify the amount of natural gas it uses and also modify the way it fires on start up. Any info or help would be greatly appreciated! Thank you!!!!
➡️ Reply Takagi
📝 GERAB said:
Subject TRANE X13650780-05 Repair RequestHi there,Im reaching out on behalf of our technician in the shop. They mentioned the TRANE X13650780-05 unit isnt working. Could you please help us look into this?Thanks!
➡️ Reply Trane
📝 Miroslaw Labuda said:
HDSL repeater Teltrend HRP6819 not boosting signal beyond 100 meters. Need repair as soon as possible.
➡️ Reply Teltrend
📝 khalid firoz said:
we have a concrete block manufacturing plants of Columbia Machines equiped with TI 5 sequencers and a whole plant is electronicaly controled including P T S.(pallet transport system ) at present we understand that the system is out dated we want o upgrade our system and would like to receive a qoute for the same.
➡️ Reply Texas Instruments
📝 Anthony Leung said:
I need the manual for the VIGOSERVO ARS30.ThanksAnthony Leung
➡️ Reply Teijin Seiki
        
📝 MIKE PIERCE said:
We have the above mentioned unit for our kitamura cnc and the one that the maintenance company supplied does not work, can you rebuild this unit? are they available for purchase as rebulit units.thanks
➡️ Reply Teijin Seiki
        
📝 Alain JOUSSET said:
Bonjour,Nous sommes a la recherche dun variateur TEIJIN SEIKIIndications relevees sur variateur en panneAR15A 120 - BA0S/N 1H 185C/N 488 406Dans lattente de votre reponse.SalutationsAlain JOUSSET
➡️ Reply Teijin Seiki
        
📝 kim young gill said:
dear sirwe need repiar center near korea or japanhow can repiar pls show me the way(tel nomber )we will waiting reflythank you
➡️ Reply Teijin Seiki
                
📝 manoj sharma said:
PLEASE HELP ME ALARM DRIVE E 101
➡️ Reply Teijin Seiki
                
📝 Audre Chay said:
Dear, i am not sure whether the servo unit is faulty or not.the digital no. only show no. 5please consult.thanks.
➡️ Reply Teijin Seiki
                        
📝 Orlando Jones said:
I am trying to get information about an E-109 code for a Vigoservo ARS30
➡️ Reply Teijin Seiki
        
📝 zhou xiang said:
Hello!can you tell me what is the mean abuot the alarm code:E-109 about VIGOSERVO ARS30.thank you very very much!Zhou Xiang
➡️ Reply Teijin Seiki
        
📝 Daniel said:
Anyone can help me on the error code E-109?Thx in advance!Daniel (Ji_shiao@hotmail.com)
➡️ Reply Teijin Seiki
                
📝 Ajay Ghanwat said:
We have Mitsubushi HMC500 with VIGOSERVO ARS30 drive for ATC magazine.Plz support for the alarm diagnosis.
➡️ Reply Teijin Seiki
                
📝 Conrado Estrada said:
Anyone can help me on the error code E-116?
➡️ Reply Teijin Seiki
        
📝 Nguyen Duc Quang said:
My company purchased Machine Centre style: MH4BN, serial no: 6AAA059. now it trouble ATC(auto tool charge), driver ( Vigo servo ARS30) loss parameter cause drop battery. Can you please send me manual for vigo servo ARS30.Nguyen Duc QuangEquipment departmentDiesel Song Cong Company.AD: Song Cong town- Thai Nguyen province.HP:+84-280 3862332.
➡️ Reply Teijin Seiki
                
📝 Nguyen dang van said:
My company purchased Machine Centre style: Okuma, serial no: milac-852v. now it trouble ATC(auto tool charge), driver ( Vigo servo ARS30) loss parameter cause drop battery. Can you please send me manual for vigo servo ARS30-A.Nguyen Dang VanMold & Die Deparment ManagerVIETNAM STANLEY ELECTRIC CO.,LTD Duong Xa-Gia Lam - Ha NoiTel : (84) - (04) 38766245 - Ext (1201)Fax : (84.4)38766188Mobile : 0912354389 Email: vannd@stanley.com.vn
➡️ Reply Teijin Seiki
                        
📝 Steffan said:
Hi NguyenDid you ever find a manual for the ARS30? We are in the same situation and need a manual to get our machine up running again.Any responce would be much appreciated.Thank you.RegardsSteffan
➡️ Reply Teijin Seiki
        
📝 javier said:
mi nombre es javier trabajo para una empresa de macanizados de presicion en una de las maquinas que atiendo tengo un SERVO VIGO ARS 30 el cual trabaja con un magacine y se para poniendo en el visor la siguiente incripsion E__9 nesesitaria si fuese posible me pasaran por mail un listado de los errores y alarmas posibles que pueden salir en dicho visor desde ya muchas gracias nestor javier canan tecnico electromecanico
➡️ Reply Teijin Seiki
                
📝 fabio vettori said:
list alarm tanks you for cooperation
➡️ Reply Teijin Seiki
                
📝 Guersemdriree said:
lo que yo queria, gracias
➡️ Reply Teijin Seiki
        
📝 Peter Mueller said:
HiPlease let me know which of the two Units ARS60-15 or ARS135-25replaces AR60B120-BAO?Thanks a lot its very urgent.Regards Pete
➡️ Reply Teijin Seiki
📝 Rafael Diaz said:
The T-win PS-2S400EP industrial power supply unit is not powering on when connected. Looking for a technician who can diagnose and repair this issue
➡️ Reply Twin
📝 Tawanda Mulilo said:
Please advise on calibrating the above unit being used as a temperature indicator. When i select a channel to be calibrated and make adjustments, it effects an equal change to all the other channels to which it is multiplexed while we only want to calibrate a single channel.Regards
➡️ Reply Tracor Westronics
📝 Jiong Hong said:
Texas Instruments 505-4332 not powering on, no display. In need of repair ASAP.
➡️ Reply Texas Instruments
📝 Rob / PSI Printing said:
I need to know if you can repair or replace the following part.Tokyo RikoshaVaritapVP-03ALine V. 100/110V 3A
➡️ Reply Tokyo-Rikosha
📝 Mark H. said:
having problem with close limit slipping and also the pull cord works sometimes you can hear the plc humming but nothing happens when you pull the cord need manuals and schematics Thank You Mark H.
➡️ Reply Therm-L-Tech
📝 Israel Sánchez said:
Good Morning Could you please send a formal quotation for this equipment the labor consist in checking the correct functionality and calibrationPlease include delivery time and method to pay this job ?Teledyne Gurley Model HRS-20PA-BRD& 8325-360-CBQA Encoder System.AttentionIsrael SanchezSiemensVDO 2700 Aiport RoadSuite 200Santa Teresa NM 88008thanks
➡️ Reply Teledyne Gurley
        
📝 Roberta Jones said:
We need to order a new bottom gasket for our Cobb Sizing Tester. It measures approximately 5.25 in diameter. Please provide pricing and payment options.
➡️ Reply Teledyne Gurley
        
📝 SeekersISeek said:
Hello Guys,Greetings. Introducing me.By the way, I am looking for book I ching translated by Kerson Huang. I cannot find those book anywhere. Do you know where I can find those? Thanks
➡️ Reply Teledyne Gurley
        
📝 BookSeekers said:
Hello Guys,Greetings. Introducing me.By the way, I am looking for book I ching translated by Kerson Huang. I cannot find those book anywhere. Do you know where I can find those? Thanks
➡️ Reply Teledyne Gurley
        
📝 Van Brahana said:
We have an old model 1100 flow velocity indicator (Serial No. AE0271) that we use for teaching, and just recently it is not registering revolutions. Do you still service these, and if so, what is your charge for problem assessment and repair?
➡️ Reply Teledyne Gurley
📝 Carl Little Jr said:
This is a Tenma 72.6345 Solder Rework Station.It is not in warranty. This equipment has a digital display for the soldering part that is not working properly.I am an electronic techician by trade and I would like to repair this unit but I am having a problem locating a schematic.Is it possible to purchase a schematic for this unit? I would deeply appreciate any help you can give me in tracking down a schematic.
➡️ Reply Tenma
📝 Marvin Lien said:
I am interested in acquiring relay boards or parts for relay boards models 34053 and 35739. I can find the relays and the relay sockets but cannot find the spade lug connectors that the board uses. I can either by parts or complete replacement boards if you have them. Thanks.
➡️ Reply Transrex
        
📝 Assemospepe said:
#2 sono 1,75 X 75 g
➡️ Reply Transrex
📝 Amy Waggoner said:
The information on the unit is emg/ep td20 mki pleasantville NY
➡️ Reply Teca
        
📝 Harold Mars said:
Do you have official manuals for the TECA EMG 4 channel premium plus.If so, what is the cost. Thank you.
➡️ Reply Teca
📝 Joe Lyons said:
I have an SDI 310 digital indicator system which is multiplexed to 4 MX60 remote mounted Mux units. After a recent power outage, We lost the display / keypad module and the ADC card (current driver seems to have gone bad-- every point flashing INVALID DATA).I used the last of my spares getting this unit working again. Are you a source for board-level repair of these units?thanks for your time,Joe Lyons
➡️ Reply Tracor Westronics
        
📝 David Barnes said:
Looking for Westronics MX-60 multiplexer manual. Electronic, PDF, copy, or paper, not particular. Willing to purchase if necessary.Thanks!!Dave Barnes, 509-373-3667
➡️ Reply Tracor Westronics
📝 NURIA said:
Dear Sir/Madam;we need to know assap if you can repair the following board of TELEMECANIQUE.The reference is:885015-41-03Please, its very urgent for us!Thank youBest regardsNuria
➡️ Reply Telemecanique
📝 Jason Joiner said:
I have a Thermal dynamics pak master 50xl plus I have a part# 9-8010 logic / gate drive pcb board that needs repair can you fix mine? and how much would it cost me?
➡️ Reply Thermal Dynamics
        
📝 Kim Ware said:
I have a Pakmaster that also has a bad board. Maybe we have enough parts to make one good machine.
➡️ Reply Thermal Dynamics
                
📝 Hershel Pearl said:
I have w-Thermal Dynamics plasma cutter that apear to be be bad. The first one is a Pakmaster 50.It has a bad ldd board in the Thermal Dynamics PakMaster 50. Can you repair it? If so, about what does it run?Im still trouble shooting the ecno 50 to see whats wrong with it.Thank you,Hershel
➡️ Reply Thermal Dynamics
                
📝 wilson ray walls said:
my son knock it off of the stand and fell on the concrete it broke off the regulater/assembly can i get a replacement part.
➡️ Reply Thermal Dynamics
        
📝 Abbas R Asariya said:
pak master 50XLpluse operation & repair manual
➡️ Reply Thermal Dynamics
        
📝 Dutch Higdon said:
I am looking for a service manual book for Pak Master Thermal Dynamics 50XL Plus Air Plasma Cutting System. This number is was on the main plate: EN50192; Volts 208/230; Manufacture Date: 228/00.This is the only informatin I found on the equipment. If you have a video, I am interested of purchasing it, too. Thank you, Dutch
➡️ Reply Thermal Dynamics
        
📝 Marvin Alfred said:
Hello There,I was using the above model a couple of days ago when it quit cutting for a moment and then started working again. This happened about three times and on the forth time the air was coming out but just quit cutting altogether.Are there things I can check before having it repaired to make sure the problem isnt something simple that I can fix? what do you charge for repairing it?Thank you and have a terrific day.Sincerely,Marvin B. Alfred
➡️ Reply Thermal Dynamics
📝 warner gonzalez said:
I have an embroidery machine tajima temg-g618 but it is does not work only can see in the screen the next code :3d7main shaft motor speed control have some problem .or cpu board is bad .Can you help me?Thank you so muchwarner
➡️ Reply Tajima
📝 DWIGHT KEARNEY said:
I HAVE A LAMP; THAT CAME IN A CHARMILLES MODEL 290 EDM WIRE MACHINE. MY COLLEAUGE HAS PREVIOUSLY HAD THEM SHIP HIM A REPLACEMENT BALLAST BOARD FOR THIS LAMP AND THE PART THAT THEY SENT WAS NOT A DIRECT REPLACEMENT. I CONTACTED THE CUSTOMER SERVICE DEPARTMENT FROM CHARMILLES TO GET TECH INFORMATION ON BALLAST EXCHANGE. THEY DID NOT SEEM TO BE KNOWLEGABLE OF THE SPECIFICS OF THIS REPAIR, SO I HAVE SEARCHED OUT YOUR SERVICE HERE ON THE INTERNET. ANY TECH ADVISE YOU MIGHT OFFER AND/OR QUOTE FOR REPAIR WOULD BE GREATLY APPRECIATED.
➡️ Reply Techmalux
📝 Kjeld Jensen said:
We have one TASC unit, Type 132 CD/6. Mod. 4, IP55, Nm 24, Serie nr. 178571-3. 90 V, 3,3 ADCIt has been standing still for some periodes. Now the iron disc with cupper has been corroded ) because off wet environment. Can you offer us a new iron/cupper disc and what is the price and delivery time?Kind regards Kjeld Jennsen, manager
➡️ Reply Tasc Drives
        
📝 Wesley Ballantine said:
We have a Tasc Unit Variable Speed Drive driving a bitumen pump on a Braham Millar asphalt plant. the plant runs most days for 1 to 2 hrs. we are finding that on start up the unit is slipping and not enough bitumen is delivered to the plant causing the plant to shut down. when it gets going it keeps going ok.Can anyone suggest a repare or part i may need. also consider s/h or new unit. Type = 160CD4/1. serile no =96993. Code = N1 1P55. Mod=3. Nm=33. Many Thanks Wesley Ballantine.
➡️ Reply Tasc Drives
📝 Chris Taylor said:
A couple of weeks ago, we had sent in a techmalux light to be repaired. (light is from a Citizen swiss turn machine). I was just wondering if you could let me know what the repair status is on this.Thank you,Chris TaylorCarolina Precision Mfg.1183 Gateway Dr.Mooresville, NC 28115ph. 704 662-3480fax 704 662-3482
➡️ Reply Techmalux
📝 JEFF SHARB said:
WE HAVE A TM-1. HERES WHAT HAPPENS-BLOWER TURNS ON, THEN A 2ND BLOWER. IGNITER SPARKS, BUT WE HAVE NO FLAME. TAKAGI SAYS GAS VALVE(S) ARE OPENING (TECH SAID HE COULD HEAR IT OVER THE PHONE) BUT I DONT THINK THEY ARE. TECH SAID TO CHECK INCOMING GAS PRESSURE. GAS COMPANY CHECKED, MAINTAINING A STEADY 8 WC. GREEN LIGHT ON, LOWER RED LIGHT FLASHING, ERROR CODE 111. ANY SUGGESTIONS? UNIT IS ABOUT 3 YEARS OLD.THANKS FOR ANY HELP.
➡️ Reply Takagi
📝 Lynn Taylor said:
My treadmill got a E100 error code. The model is a J440 and although has some age - looks like new and was working like new. I had someone look at it here, and I am not confident in his ability. He also broke the switch (on/off) while looking at it. Can you help?
➡️ Reply Tunturi
        
📝 Tto Roberts said:
Cannon get unit to start. Get error message that key is not inserted properly. Have key in and have changed the position and cannot get it to work. Was working and suddenly this happened.Thanks
➡️ Reply Tunturi
        
📝 Rinus Heer said:
Hello,1) Do you have parts of the Tunturi ECB Workout Cycle F 400? 2) How much time do you need to deliver these at my home address? 3) Can I pick them up myself (where)?I need the following:Ref. nbr. 88 - Partnr. 263 1005 (one-way pulley)Ref. nbr. 85 - Partnr. 443 1002 (toothed belt)Thanks, Rinus Heer.
➡️ Reply Tunturi
        
📝 Morris Yng said:
Have replaced batteries in the meter for F400 Exercise bike but display still not working when resetting or pedalling. However pulse sensor does work and registers on screen.
➡️ Reply Tunturi
        
📝 Sara F. Shields said:
My Tunturi 900 StairStepper is not responding to the reset button and seems to be stuck in a cycle. I have tried unplugging the stepper and hitting the reset button. Please let me know what I can do?
➡️ Reply Tunturi
        
📝 jon said:
we have a tunturi t90 when we switch it on says system check failed
➡️ Reply Tunturi
📝 William Jimenez said:
Hi, I need Manual and Technical information to chart register Westronics CCR 600, for calibrate the inputs and pens.Thanks William Jimenez
➡️ Reply Tracor Westronics
        
📝 Kirk Wilson said:
Need some info about Tracor temperature monitoring system using model 7201 control unit and display. Have received a display unit, model 7201, with range module P/N 72-00022. This module is set up for rtd input, and I need to monitor Type K thermocouples. Can the range module from the old unit be swapped into the new unit, and recalibration performed, or must the electronics be ordered to support thermocouples?It appears the company is out of business...........any help would be appreciated. The control module and interface box appear to work okay, and time constraints dictate that we resolve this or order new equipment ASAP. Thanks,Kirk WilsonInstrument Technician
➡️ Reply Tracor Westronics
📝 Cal said:
I am inquiring about getting a replacement of the takamine tk 40 pre amp for an EG523SC I am looking at purchasing one with a possibly bad preamp I am just trying to find out how I can get a new preamp for it if I need to replace it, I cant find anyone selling the tk40 pre amp to replace it with.thanks for your help.Cal.
➡️ Reply Takamine
        
📝 Mark Naro said:
I have a Takamine EG530 C with a TK4 N preamp pop out of the guitar hit the floor and the case is broken. Now I do not know if the preamp works?
➡️ Reply Takamine
        
📝 Andy Walls said:
I have no audio or light with fresh battery in preamp. How much to fix this preamp
➡️ Reply Takamine
        
📝 Paul Aubry said:
I try to know if it is possible to repair or buy a new takamine guitar premp , Graph-Ex preamp???
➡️ Reply Takamine
                
📝 Widdy Loo said:
My Takamine Electric Acoustic with the Takamine ACCUR Acoustic EQ has about half the volume it should. Battery is good, maybe one of those things in there lost there value and needs to be changed. Is it possible to repair? If so can I just send the onboard unit with out the guitar and pickup? Your reply will be appreciated.Thanks
➡️ Reply Takamine
        
📝 Val Gladden said:
I have a 2001 graph ex pre-amp and recently the volume pot has been giving me problems. Ive tried cleaning it but it is so sealed up that it is hard to get any spray in there. I even drilled a small hole in the plastic housing and got the same result. I think if I replace it, my problem will be solved. I hate to spend $200+ for an entire replacement, when I can just solder on a new knob. Any suggestions would be appreciated.Thanks
➡️ Reply Takamine
        
📝 Richard Dunn said:
I have a EG330C with what is, I believe, a bad preamp. It uses the N4B preamp with the RCA plug input and a 3.5MM output. There is no output from the unit. Have switched the 9v and the batt test light does come on. Is there a way to test this? Can it be repaired? I realize that it could be the pickup and dont know haw to determine the issue.Any assistance appreciated.thanks - Rich
➡️ Reply Takamine
📝 jim liccione said:
hello, we are a art museum plus art school. we have a thermal dynamics pax master 50. we are not able to control or use the gas pressure gauge. we do not have a part number. can you offer us some help. thank you
➡️ Reply Thermal Dynamics
        
📝 mark decker said:
i have a service manual i have checked it out, toubleshooting points to main board i need estimate on repair of board
➡️ Reply Thermal Dynamics
                
📝 T. Carr said:
will not fire only blows air
➡️ Reply Thermal Dynamics
                
📝 Michael said:
I have an older oak master 50 the collar that screws on to the machine that holds the cables to the pak master snapped in half is there any were you no of that I can retrieve this part?Thanks michael
➡️ Reply Thermal Dynamics
                
📝 Jerome Karsonovich said:
Can you give me the value of the two large resistors on the main pcb located in R165 & R166 locations. They appear to be around 5 watt in size.
➡️ Reply Thermal Dynamics
📝 Ene Petre said:
Triangle Package 90wb6028ag seems to be malfunctioning and is not operational. Looking for a technician to diagnose and repair the issue
➡️ Reply Triangle Package
📝 Sandeep said:
Dear Sir,I need urgently service manuls for TDK make radial insurtion machine, for madol no. VC-7A,VC-7B,VC-5B
➡️ Reply Tdk
📝 Christi Fogler said:
I have 2 lights needing repair. The glass tubes are gone and the bulbs need replacing. The unit is a Lumolux K/136 with an article # of 591-019-014. What type of turn around could I expect on the units? They are 120V / 60Hz 36w units.Christi
➡️ Reply Techmalux
📝 Jack Rogers said:
I have a tracor 7201, 7202 temp display and tracortemp chart recorder model MSESN 2280 options TJR 3650 0680That I would like repairedThanks jack
➡️ Reply Tracor Westronics
📝 Sue Taylor said:
I have a Teledyne Pines Single End Finishing Machine Model #660 that I am looking to buy replacement cutting tools for.I believe the part number is 8-660-086-042.Do you sell these?My machine is down and Im looking for these ASAP.Thank you,SueCell Phone 713.344.1327
➡️ Reply Teledyne Pines
📝 AARON LESKO said:
WE HAVE 2 PCS. #MC1K-U050 AND 1 PC. #MC1K-U150 TOYODA ABSOLUTE POSITIONING CONTROLLERS. THEY ARE SURPLUS TO OUR NEEDS, BUT WE WOULD LIKE TO HAVE THEM REPAIRED SO THAT THEY ARE SALABLE. PLEASE QUOTE AND ALSO TELL US IF YOU COULD SELL THEM FOR US.
➡️ Reply Toyoda
📝 Kurt Traynor said:
I am not receiving low end power when plugged into my amp. I get plenty of highs and after talking to someone from Tak they suggested it being the preamp assembly. So, I am looking for a replacement pickup assembly for my Tak fp360sc. If you have these in stock could you please send me a price.
➡️ Reply Takamine
📝 Steve Louie said:
Hello,Im Steve from Stanadyne Corp. here in Jacksonville NC. I have been in contact with Ms Donna about some items requiring repair. Namely a Technifor control box UN-200/e and now its head Assembly Cn-200. Ive these items packed and ready to ship, but my supervisor has tasked with trying to find out your experience and success rate on repairing these items.Please let me know and I can pass this up the chain here and get these items repaired.Thank YouSteve
➡️ Reply Technifor
        
📝 RAVINDRA KUMAR Singh said:
marking complete but marker does not move its home position and key feeding does not move for bitting and display shows overtime of marking unit
➡️ Reply Technifor
📝 chip tipton said:
I have two ea l425-kbt015 bulb need repaired, how long does this usally take to repair ? regards,chip
➡️ Reply Techmalux
📝 Peter M Hayes said:
I have a TC-Electronics M-OneXL Dual Effects Signal Processor which emits white noise when any of the delay functions are selected.Is this something that you can repair. I have owned this unit for several years and it is well out of warranty repair status.Regards,P. M. Hayes
➡️ Reply TC Electronic
📝 alex c muhitira said:
SIR WILL YOU PLEASE SEND FOR ME INSTRUCTION MANUAL FOR ABOVE DRIVE ,THE ONE WHICH WAS SUPPLIED WITH ,HAS LOST .IF YOU SEND EVEN CONNECTION INSTRUCTION IS GOOD IAM LOOKING FORWARD TO HIRE FROM YOU SOON YOURS IN TECH . ALEX C M
➡️ Reply Toyo Denki
        
📝 Thai Binh le said:
I had 2 inverter toyodenki but I dont have catalog . Please give me the catalog thank!
➡️ Reply Toyo Denki
        
📝 j.v ravichandran said:
dear sir, we are having 10 toyodenki inverters vf 64 all are not working out of order can you please help us sir thank you ravichandran 00914423727543 or 00919972411227
➡️ Reply Toyo Denki
        
📝 Wong Chee Chong said:
Dear sir,Good morning.Kindly send me a soft copy of the inverter type stated above.Your reply is very much appreciated.Best regards,ccwong
➡️ Reply Toyo Denki
                
📝 Tran Minh said:
Dir sirwe have a vf61v-2222-w1 inverter . now inverter had problem .when error inverter display error code it is En 2.we have not manual book so we can not repaired . Please help me clearify this problem.Thanks & best regards
➡️ Reply Toyo Denki
                        
📝 sajid said:
Dear Sir,Kindly send VF64-222-W1 instruction manual and connection details to us Kind Regardssajid
➡️ Reply Toyo Denki
                                
📝 Juan Carlos Suarez said:
Dear Sir, Kindly send VF64-222-W1 instructions and connection details with us Preferably in Spanish or English thanks and best regards Juan Carlos Suarez
➡️ Reply Toyo Denki
                                
📝 Shaliah AM said:
pls sent thrugh by mail
➡️ Reply Toyo Denki
                                        
📝 sergio sanchez said:
I need the manual operation vf61v 2222 thanks I am at your servicesergio sanchez
➡️ Reply Toyo Denki
                                                
📝 Mitul Ravat said:
Urgent requirement of Manual of VF61V2222 make of TOYODENKI.
➡️ Reply Toyo Denki
                                                
📝 parthajit samanta said:
Dear Sir / Madam Please you help me for manual & Software . I request you If you help with send me software with manual.
➡️ Reply Toyo Denki
                                                
📝 Tarak Mondal said:
pl send me manual for below model,TOYO DENKIMODEL: VF61V-2222-W1
➡️ Reply Toyo Denki
                                                        
📝 areeb said:
Dear Kindly I require manual as i have the same inverter, i need to program
➡️ Reply Toyo Denki
                                        
📝 NAKUL said:
hello sir i want repair (vf 61 v 2222) drive please send me coatation for drive repair,
➡️ Reply Toyo Denki
                                
📝 Shaliah AM said:
we need VF61V 2222 connection and instrection Programme Manual pls saggestion for without (optcoder )option sent thrugh by mail.Best regardsA.M. Shaliah
➡️ Reply Toyo Denki
                        
📝 hoa van said:
Dear sirwe have a vf61s-7r522 inverter. now inverter had problem .when error inverter display error code it is oV.we have not manual book so we can not repaired . Please help me.Thanks & best regards
➡️ Reply Toyo Denki
                        
📝 kedar patil said:
we need the parameter setting how to operate
➡️ Reply Toyo Denki
                
📝 aslam butt said:
toyo denki inverter is a sold and good
➡️ Reply Toyo Denki
                        
📝 le tuan said:
can you help me? I need is user manual for VF61s series inverter.I speak English is not good!thanks
➡️ Reply Toyo Denki
                        
📝 bobby said:
I think it has lost all its parameters if possible a manual would be great
➡️ Reply Toyo Denki
                                
📝 Madras Safire Lithographers said:
Dear Sir, We from Madras Safire Lithographers,Sivakasi. We using your ( VF61v 3722 ) model . (Lithrone 40P L-440P. SN116) . Here some technical problem in this machine. So we need Invertor English Operation Manual.. So Please send as Quick as Possible... our mail id is mention above itself . We looking for your kind Reply...... (svksmslg@gmail.com)
➡️ Reply Toyo Denki
                                        
📝 kwangyong, ham said:
The type of inverter : vf61 v 3722Equipped at offset press Lithrone 40P L-440PDear sir, Last couple days our press machine trouble with inverter as above mentionedSo I need to have english manual, please send as fast as possible, looking for your kind reply soon.Best regards,saint2662@yahoo.co.kr82-10-28252662
➡️ Reply Toyo Denki
                                        
📝 Muhammad Saiful Alam Sarker said:
Dear sir,Please give me user manual in English of the Inverter Vf61-i 3R722 soft copy. Best RegardsSaiful
➡️ Reply Toyo Denki
                                        
📝 ANGE Benjamin said:
Dear sir,We are in need of TOYODENKI VF16V-2222 User Operating manual.Can you please provide as son as possible.Thank you in anticipation.Regards
➡️ Reply Toyo Denki
                                
📝 Dadang Syarif Hidayat said:
may i see for manual book inverter toyo denki VF61V-3722?
➡️ Reply Toyo Denki
                        
📝 eko juhan said:
i want manualbook toyo denki type VF61S, and price list card control type vf61v-p1. thank before
➡️ Reply Toyo Denki
                                
📝 nelson said:
Toyo Denki vf61v 3722 220vac
➡️ Reply Toyo Denki
                        
📝 eko juhan said:
i want manualbook toyo denki type VF61S, and price list card control type vf61v-p1. thank before
➡️ Reply Toyo Denki
                        
📝 LIM said:
Need to repair my machine!
➡️ Reply Toyo Denki
                        
📝 vv said:
vf61 invereter user manual
➡️ Reply Toyo Denki
                
📝 Barry Illing said:
Please supply manual for the above inverter.Thank you.
➡️ Reply Toyo Denki
                        
📝 Al Rawnak printing co. said:
May we request for a diagram for this inverter. Thank you
➡️ Reply Toyo Denki
                        
📝 Jotty George said:
Dear Sir,We have a printing Komori Machine. in that main motor drive got repeired.To rectify that we need manual of the above.please mail me back the mannual.hope you will mail me soonRegardsJotty george
➡️ Reply Toyo Denki
                        
📝 Ivor Wee said:
My machine Komori L528 , Inverter always indicate overload.Where do I have to send for repair?.Best Regards
➡️ Reply Toyo Denki
                
📝 Sarath Fernando said:
IT is a good quality inverter
➡️ Reply Toyo Denki
                        
📝 Enrique Marín said:
I need the VF61 inverter manual to help diagnose faults
➡️ Reply Toyo Denki
                                
📝 farag said:
PLEASE SEND ME THE MANUAL OF vf61-02-B7 vfc61-P1-qB5THANKS AND REGARDS
➡️ Reply Toyo Denki
                                        
📝 muhammad nadeem said:
pls send me by email. user manual vf 61
➡️ Reply Toyo Denki
                                                
📝 wilbert said:
my drive VF 61 is same pro so pls sent manuel
➡️ Reply Toyo Denki
                                                
📝 muhammad said:
pls send me book thanks and very good.
➡️ Reply Toyo Denki
                                                
📝 Patil said:
Urgent Requirement
➡️ Reply Toyo Denki
                                
📝 FARAG said:
I need the VF61 inverter manual to help diagnose faults
➡️ Reply Toyo Denki
                
📝 Victor Gonzales Casas said:
Messrs. ToyoDenki please i need the drive VF61 2244. We appreciate manual if I send it to my email. Also need to buy 2 more. atte. Victor Gonzales Casas. Peru Lima.
➡️ Reply Toyo Denki
                
📝 Faraz Malik said:
Very Good Drive Toyo denki
➡️ Reply Toyo Denki
        
📝 B.GOVINDARAO said:
very good drive
➡️ Reply Toyo Denki
        
📝 indra said:
Dear Sir,Could you please help me to get the manual isntruction in PDF file in English Version for the TOYODENKI INVERTER type VF5140HGRegards,INDRA
➡️ Reply Toyo Denki
        
📝 awadhi mrutu said:
Hi! Sir I have problem with the invertor of my pinting press with the following specification:Yoyo Denki inverter Type VF61s-7R522-W1APPL: QB1INPUT 3Q 200V-230 50/60HZOUTPUT 200V 7.5KW 32.5 MAX(180 5.5KW 32.5A MAX). ALSO INCLUDE WITH ITS INSTALLATION MANUALI NEED THIS UNIT VERY URGENT SO KINDLY SEND ME THE QUOTATION IF YOU HAVE. I HAVE DECIDED TO CONTACT YOU BECAUSE THIS INVERTOR I HAVE IS FROM YOUR COMPANY. IT IS USED IN COMORI PRINTING MACHINE.BEST REGARDSAWADHI.
➡️ Reply Toyo Denki
        
📝 Mansour Sow said:
Hi I would like to get the instruction manual for this inverter VF 61.Thanks in advanceRegards
➡️ Reply Toyo Denki
                
📝 Armando Ríos Garro said:
Por favor necesito me hagan llegar el manual de repracion del varidor trifasico VF61 2244
➡️ Reply Toyo Denki
        
📝 shailesh patel said:
we have VF64V-2222-W1 drive but no any operating manual so please send to soft copy manual
➡️ Reply Toyo Denki
        
📝 Richard said:
Dear Sir/MadamHave a nice day.Firstly I would like to introduce our company.Our company is one of the largest cosmetic manufacturing companies in Myanmar,namely Shwe Pyi Nann Co;Ltd.Now we would like to buy Toyo Denki inverter from your company.In this case please let me know the price quotation of the following mentioned item.our required product is,TOYO DENKIVF 61S 7R522Input 200-230V 50/60HZOutput 200V 7.5 KW 32.5a MAX 180V 505 KW 32.5A MAXFrequency Inverter motor drive.please send for further information to spmh08@gmail.com Wishing you all the best,RichardShwe Pyi Nann Co., Ltd.28(B), Inyamyaing RoadShwe Taung Kyar Ward (1)Bahan TownshipYangon, Myanmar
➡️ Reply Toyo Denki
        
📝 Jotty George said:
SIR WILL YOU PLEASE SEND FOR ME INSTRUCTION MANUAL FOR ABOVE DRIVE ,THE ONE WHICH WAS SUPPLIED WITH ,HAS LOST .IF YOU SEND EVEN CONNECTION INSTRUCTION IS GOOD Expecting a sudden action
➡️ Reply Toyo Denki
📝 Lynn Waterhouse said:
What would you charge for a house call to Mebane, NC to take a look at my Tajima single head embroidery machine? Please email your reply...Thanks,Lynn
➡️ Reply Tajima
📝 Ken Lemanski said:
Please provide pricing to repair a Toshiba V-10 touch screen.
➡️ Reply Toshiba
📝 Matt Kahle said:
I cant get my T-6 to turn on. We just moved a few weeks ago and Im getting around to setting it up, but I cant seem to get it to turn on. Ive verified the power cord and outlet are working, but not hte unit itself.Any ideas? Is it possible to get a replacement Alpha unit? An alpha 150, 200 or even 300? Cant seem to find them online... Please help!Matt
➡️ Reply Tunturi
📝 jeard said:
Hi I have a taylor weatherscope and i was wondering if you have the sensors for the wind speed and wind direction? can i send the unit to you and you give me a estimate?
➡️ Reply Taylor
        
📝 Sharon Casey said:
We inherited the above ... wondering what we need to do to install and get it up and running. Please advise! Thank you!
➡️ Reply Taylor
📝 Prabha Shankar Choubey said:
Dear SirWe have around 20 DC drives of TOKUDEN, Model No.-UCP 4300FAVNPlease suggest us, from where should we have technical/maintanance support.Please also suggest us that from where should we purchase spare parts.
➡️ Reply Tokuden
📝 John Grundeland said:
I need to find a commutator for a toyo denki motor. do you have these or know where I can find one?
➡️ Reply Toyo Denki
📝 Tacklind said:
Subject Texas Instruments 500-2151 IssueHi there, Im reaching out on behalf of someone in the shop who mentioned that the Texas Instruments 500-2151 unit isnt working. Thanks,
➡️ Reply Texas Instruments
📝 tuan truong said:
please for me catalog toyo denki vf5100hg.thank you.
➡️ Reply Toyo Denki
📝 KREBS BIOCHEMICALS & INDUSTRIES LIMITED said:
dear Sir,we have above model of VFD which is in trouble, kindly let us know the authorized service center near to us and send us their details.so that we can interact with themand get it rectified.thanks & regards
➡️ Reply Toyo Denki
        
📝 Andrey Evdokimov said:
Accidentally found your correspondence. We are looking for Toyo Denki inverter, model VF61S 7R522, used or new for our printing machine, on the off-chance, but may be you can find and provide us with this inverter or may be with new model of this, i.e. VF66B 7R522If yes, we can pick up in in USA too.Kind regards,Andrey EvdokimovMoscow,+5 920 877 4250
➡️ Reply Toyo Denki
📝 mike shores said:
i have an 8822 1:100 encoder. the pins have been damaged but the unit itself is ok. can it be repaired?
➡️ Reply Trumeter
📝 siraj said:
i required the manual VF5100HG PLZ EMAIL ME
➡️ Reply Toyo Denki
        
📝 MOTORCONTROL said:
MANUAL DRIVE
➡️ Reply Toyo Denki
                
📝 David J Langley said:
Please !
➡️ Reply Toyo Denki
                        
📝 Vasanthkumar said:
fault cs2 is indecating
➡️ Reply Toyo Denki
                        
📝 waheed said:
please reqaird instruction manual
➡️ Reply Toyo Denki
                
📝 vasanth said:
Toyo Denki VF51HGS Inverter Manual
➡️ Reply Toyo Denki
                
📝 imran said:
plz send me toyodenki vf5100hgthanks
➡️ Reply Toyo Denki
                        
📝 alessandro said:
manual toyodenki vf 5100 hg
➡️ Reply Toyo Denki
                                
📝 edivando said:
boa tarde. Um favor pode me explicar o erro 1oc - 2oc - 3fque aparece no painel do inversor modelo vf61-2222
➡️ Reply Toyo Denki
        
📝 Avedis Kazandjian said:
VF5100HG manual to maintaind driver
➡️ Reply Toyo Denki
                
📝 nguyen kim son said:
I need ducument of vf5100h, can you help me. Thank.
➡️ Reply Toyo Denki
        
📝 yusron said:
Dear sir,Please send manual book inverter toyo denki VF5100HG to my email : yusron1985@gmail.com.Because my inverter trouble :LU3ThanksBest regardYusron
➡️ Reply Toyo Denki
        
📝 anton said:
Manual book toyodenki v5100hg
➡️ Reply Toyo Denki
📝 toto said:
please inform to me the VFC2001-P1 Board. i need to order that part. if the Board is ready please give me the Invoice. please help me. ASAPregardToto
➡️ Reply Toyo Denki
        
📝 sathish said:
need toyo denki ed64sp parameter setting.
➡️ Reply Toyo Denki
📝 upendran.sd said:
I am a business customer inquiring about repair service for my Total Control Quick Panel Jr. The display on my unit is not functioning properly - it remains blank even when the device is powered on. As this unit is essential for our operations, I would like to know the estimated cost of replacing the display if the repair proves to be costly.I am experiencing an issue with the display on my Total Control Quick Panel Jr. It is not showing any information despite the unit being powered up. If the repair cost for the display is high, please provide an estimate for a replacement unit.
➡️ Reply Total Control
📝 Michael Thompson said:
My company is tryng to locate a replacement gating board for a Toyo Denki VF61S 7522 unit.The board is labeled GAC61-7522-P1Please feel free to contact me directly if you have any questions or if I can be of any service.Regards,Michael Thompson
➡️ Reply Toyo Denki
📝 Gloria Pai said:
Dear Sir,I need one set of LUMOLUX K2/026, 26W ohne VG, Art number 591-042-001, and one piece of lamp 26W.Could you please give me your quotation. Thank you.With best regards,Gloria PaiSun Shine Gear Co., Ltd100, Chiu Se Lane, Pei Tun District 406, Taichung, Taiwan
➡️ Reply Techmalux
📝 zaheer hussain said:
inverter model ed64sp-16044-w2 igbt module cm-300dy-24h faulty
➡️ Reply Toyo Denki
        
📝 bethel graphics said:
Dear sir, we have one komori S II 28 106, Sprint one color printing machine,model-1994. When we switch on the main press, the inverter shows loc . So kindly tell us the meaning of loc, kindly send full details and trouble shoot diagrams, inverter details, we are waiting for your honorable reply, still machine not running.Note; Toyodenki ( spatial vector inverter ) V F 5 1 H G S 522- w1regardskirubhakaranm/s.bethel graphicsindia
➡️ Reply Toyo Denki
        
📝 Imran Raza said:
Dear Sir,Please quote the competitive rates of the following with Literature: IGBT Firing Card Model: GAC2001.Early reply is requested please.Kind RegardsImran Raza
➡️ Reply Toyo Denki
📝 STACY BARRETT said:
I see that you repair Transformator-Teknik products, however can you purchase new? If not, do you know of someone here in the States that is a distributor? I have a customer looking for the following transformer, new and possibly for Next Day Air.Transformer: Transformator-Teknik1-FAS ISOLERTRANSMORMATORArt.n.r. :ENL20920Prim. 208/230/460/575VSek.: 115V50VAV083450-60Hz0.43APlease contact me via email or my cell at 540-336-2472 as I am out of the office today. Thank you.
➡️ Reply Transformator-Teknik
📝 Russell Owens said:
Trine 6201 isnt powering on. Need immediate repair assistance.
➡️ Reply Trine
📝 Don Jensen said:
I am looking for a manual for my Pathfinder 5 DRO model 8770-2 S/N 26-7-0478. Also a source for renewal parts. I know I need to replace the encoder lamp on one axis.
➡️ Reply Teledyne Gurley
📝 Andy Smith said:
We are an Auto parts company.We have 4 of these units in operation, no back-up.Looking for a back-up unit.I am told the control card is no longer avalible.
➡️ Reply Tsudakoma
📝 Frank Giannone said:
can i buy a replacement sending unit for the speed and wind direction for an old Taylor weatherscope.thanks,Frank
➡️ Reply Taylor
📝 eliyanto said:
Subject Urgent Rotary Indexer Equipment DownHello,We are experiencing issues with our Tokyo Elmec Corp. 2 Rotary Indexer. The equipment is displaying error code E123 and is not able to move the indexing mechanism. This is impacting our production line and we need immediate assistance to resolve this issue.Please advise on the next steps to get the equipment back up and running.Thank you.
➡️ Reply Tokyo Elmec Corp
📝 RANGARAJ said:
REF YOUR ENQ BY SMS ON 7-11-11MR. MURUGESAN CELL : 09364228322UDAMALPETWE OFFER TRUTZCHLER CARDING PCBS USED TRUTZSCHLER CARDING USED PCBSPR-E-9 491-89.231.000 - 1NO @ 1500-00 EACCM N P1-9 491 .88.230.000 - 1NO @ 1500-00 EACCM U E 1 9-491 91.230.000 - 1NO @ 1500-00 EACCM IR1-9 491 -90.230.000 - 1NO@ 1500-00 EAPOWER SUPPLY FU2- 2NOS @ RS 5000-00 EAPRESSURE SWITCH -DSP-10-0 350.81881.860- 1NO @1000-00GMB-1 9494-58,210.001 AA 1NO@ 3500-00 EAKSZ-2C-408 91 -813.000- 2NOS @ 4000-00 EA SOVEREIGN ELECTRO ELECTRONICS15, CMC Complex Avanashi Road Coimbatore -641018 Tamilnadu IndiaTel: + 91- 422-2303674 Fax: + 91- 422-2380674 Mobile: + 91- 9894030367Url: www.sovereign-sales.com Email: sales@sovereign-sales.comWWW.PNEUMATICSINDIA.NET; WEBSITE: www.sprecherschuhcontrols.com ASSOCIATES: SUJATHA ELECTRONICS
➡️ Reply Trutzschler
📝 sukhbir singh said:
Pl give your Indian Agent details or your details where we can send our enquiry
➡️ Reply Tristem Electronics
📝 wayne sanders said:
We have been using Techmalux, Lumolux lights. A lot of failures in electronic base. Are they worth repairing? Rough cost? I have about 8 bases #410-000-022 from light #K2E/413 ( #591-026-010 ). I thought it may be fuse. Fixed one.
➡️ Reply Techmalux
📝 Fred Andrews said:
We have a vessel agitator running on dual drives due to the 133kw poer required. The drives are stopping then starting without any indication of why. No alarms or faults shown. Just stop and start for no reasong. These drives are over 20 years old. Could the transistors be going? Any ideas?
➡️ Reply Toyo Denki
📝 Bill Sigle said:
I have a EG544SC-4C with a TK40 preamp that Does not operate properly. It will play through an amp when in the tuner mode, which it is not supose to, but with the tuner turned off its only static or nothing at all. I have removed it from the guitar and there is no visible exterior damage.I would like to know if it can be repaired and how much it woul cost.Thank you.
➡️ Reply Takamine
📝 John Kowalkowski said:
Hi,We are a US DOD facility that has older White Carousels with the IPC controllers.They have a TEKNOR MICROSYSTEMS circuit card:MODEL:TEK-AT1 PROD:T700_6-16_WAAre these something that your company can repair? What would the price be? Shipping back/forth is easiest via USPS Priority Mail Flat Rate box using our FPO,AP address.Does your company take the Govt Purchase Credit Card?Thanks,John
➡️ Reply Teknor Microsystems
📝 luis rodriguez said:
I have a drawback in the control with no lights fkc 2000 water pump or compressorthank you for your information awaiting your response
➡️ Reply Technotrans
📝 jon said:
I need a Technotrans screen replaced replacement part # 526535-000 elo touch screen
➡️ Reply Technotrans
📝 Nathan Slaten said:
This preamp was missing a pickup that plugged in behind the preamp with a RCA jack. It did however contain with it a 1/8th inch male to 1/4 inch female pigtail for the guitars input. I was curious as to where I might be able to find a wiring diagram for this and another Takamine Pre-amp I am currently working on. Its a Graph-EQ Pre-amp. It has a battery with an LED switch for batt check, a volume control, three band graphic equalizer and an extra fourth slider called an exciter. The other has in place of the exciter a volume gain slider and no knob at all. It seems as though the two units are not working correctly and I believe that it is due to somebody working on them prior to my obtaining them who didnt know what they were doing. A diagram is a must in this situation and any help would be greatly appreciated. Thank you.
➡️ Reply Takamine
📝 Rod Chandler said:
The drive board on your Tajima CX5609030000 is malfunctioning, causing the unit to display errors or be unresponsive during operation. To solve this issue, it is recommended to replace the drive board components. The estimated cost for this repair depends on the extent of the damage and the overall value of the unit.
➡️ Reply Tajima
📝 paul myers said:
Subject Teijin Seiki ARS15-06 Vigoservo Repair InquiryDear Repair Shop,I am reaching out on behalf of a client who is experiencing issues with their Teijin Seiki ARS15-06 Vigoservo (part number ARS15-06). The client has reported a problem with the functioning of the servo system and is in need of repair services.Could you please provide details on the repair process, estimated timeline, and cost associated with addressing this issue? Any information you could provide would be greatly appreciated.Thank you for your
➡️ Reply Teijin Seiki
📝 Jason Bullins said:
We are currently have issues with a Blum Power Supply Part#: SNT60200 that is installed on our Trumpf Laser. Is it possible that you guys can sell me another one of these.
➡️ Reply Trumpf
📝 Bob Culvey said:
Good agternoon, We have a Handysurf E-30A that with the AC Adapter plugged in to the outlet and the Handysurf, when pressing measure it displays No Battery. Would this be an AC Adapter issue? Also what would be cost of a Calibration for this Handysurf?Thank you for your time Bob
➡️ Reply Tokyo Seimitsu
📝 Gert Smith said:
Got a Tokyo Electronics 1D81-000098-C9 audio board failure. Need immediate replacement. Heading to the next machine now.
➡️ Reply Tokyo Electronics
📝 Chris Kenney said:
I am looking for a SBAG - 202Line Max 500VContact Cap. DC 30V 2A, AC 125V 2A, AC 250 1AAux power supply: AC 170V 270V 50/60 HZCan you provide price and delivery time.RegardsChris Kenney
➡️ Reply Tracor Westronics
📝 John Robinson said:
Hello, we are having an issue with our vigo servo. We are getting an E101 alarm. We have found out that this alarm means a IPM alarm but we are unsure as to what that actually means.You can reach me by phone or email listed above.Thanks, John.
➡️ Reply Teijin Seiki
📝 FRANCISCO GUERRERO GRO said:
Subject Topedm MCP001-AA IssueHello, I was informed that the Topedm MCP001-AA unit is not functioning properly. Its showing an unknown issue and needs attention. Can you please investigate further? Thank you.
➡️ Reply Topedm
📝 KEVIN DRESCH said:
: Our industrial unit has been experiencing recurring issues with the conveyor system in recent weeks. The system is supposed to transport raw materials from the receiving dock to the production line, but its consistently jamming and halting operations. This results in significant production delays and increased labor costs, as we have to manually move the materials by hand. The unit is becoming unreliable and we are concerned about the potential for further damage if not addressed immediately. We estimate that a replacement conveyor system with similar capabilities would likely cost around $50,000, depending on the specific specifications and materials chosen.:
➡️ Reply Trcor Westronics
📝 PAULO DE OLIVEIRA BRASILEIRO E said:
Need electrical diagram for Toyo st50 disc pro
➡️ Reply Toyo
📝 Lee Morris said:
: Our industrial unit, a unit type used for brief description of units function, has been experiencing recurring issues with the specific part of unit. Its causing problems with describe issues impact on functionality - e.g., output is not consistent, production speed is hindered. As it stands, the unit hasnt been able to operate at full capacity for several days, and this is significantly affecting our ability to meet deadlines and deliver products. We are considering a replacement if repair costs become prohibitive, as we need to be back at full operation in as short a time frame as possible. Based on similar repairs and parts availability, a comprehensive repair could range anywhere from $XX,XXX to $XXXX, depending on the extent of needed work. However, a brand new unit would likely cost upwards of $XX,XXX, given the specific model/features. Wed appreciate an estimate for repair options with timelines, including potential replacement costs if necessary.:
➡️ Reply Thermltech
📝 Tin Sarmiento said:
Dear Sir/Maam,Good day ! I would like to request a quotation for the item below. PLEASE QUOTE:1pc. SERVO MOTORPart no. / Model no. / Stock no. : UP H7S-11-BIOBrand: TEIJIN SEIKI/NabtescoFor Equip/ Tool: TSOP Deflash/Dambar Progressive Tool HANMIFor Equipment serial no. : TSP-2582-2002-- Notes:Weight / HeightMinimum order valueMinimum order quantity Freight fee to Manila Philippines
➡️ Reply Teijin Seiki
📝 li yanming yanming said:
Hello.Excuse me?We are an electrical and mechanical engineering company in china.We need to buy the following products:We can accept: refurbishment, alternative.V160SERVD ARS30-10Quantity; 1Would you please make us a favorable offer?And provide accurate information:Price, weight, delivery date, information, etc..Thank youLook forward to your reply?Li YM
➡️ Reply Teijin Seiki
📝 JR TECHNO PRODUCTS said:
WE HAVE PURCHASED OKUMA & HOWA MILLAC 550H FITTED WITH 60 TOOLS ATC RUN BY VIGO SERVO ARS60.NOW WE HAVE PROBLEM TO OPERATE THE ATC. PLS SEND OPERATION/MAINTENANCE MANUALTHANKS
➡️ Reply Teijin Seiki
📝 Brad Dean said:
Hi - Are you guys able to winterize TOMRA Alpha VE (40) color sorting equipment? We have two locations in Central CA. We are looking for more cost-effective options that TOMRA directly. Please let me know ASAP. Thanks!Brad
➡️ Reply Tomra
📝 nikolai zagorov said:
Subject Urgent Help Needed - TEXAS INSTRUMENTS DT-5K-PS/2 AC/DC Input Module DownHi there, We are experiencing issues with our TEXAS INSTRUMENTS DT-5K-PS/2 AC/DC Input Module. The module is currently displaying an unfamiliar error code E8 and the power LED is flashing intermittently. This has resulted in a loss of power supply to the connected equipment, causing a disruption in our operations. Immediate assistance is required to diagnose and resolve this problem as soon as possible. Please advise on the next steps for troubleshooting and repair. Thank you for your
➡️ Reply Texas Instruments
📝 Craftsman automation said:
Looking for assistance with a Teijin Seiki ARN15-A VIGOSERVO unit that is not responding to commands. Need immediate repair support.
➡️ Reply Teijin Seiki
📝 Richard Parkes said:
Hello, I am in need of repair or replacement information for a TAYLOR 36641-1. The machine stopped working, and we require assistance in fixing it
➡️ Reply TAYLOR
📝 shahid farooq said:
It appears that your Tidland 27L250063 controller is malfunctioning. Can you provide details on what specific issues you are experiencing with the unit? Depending on the severity of the problem, repair costs can vary. Please share more information for a more accurate assessment and estimate of potential replacement expenses.
➡️ Reply Tidland
📝 Carlos Gonzalez said:
My Techmalux KE/418 lamp is not turning on despite multiple attempts to power it up. It seems to be a potential issue with the power supply or the internal wiring. I would appreciate a repair service assessment to determine the exact problem and estimate the replacement cost, especially if the unit holds significant value to be considered for repair.
➡️ Reply Techmalux
📝 bill whitacre said:
Teijin Seiki UP15C121-010 Motor not responding when powered on. Need immediate repair assistance to get production back on track.
➡️ Reply Teijin Seiki
📝 Rob Terry said:
Looking for a Vigoservo ASR30 Manual.Do you have on available for download?Please advise.Thanks
➡️ Reply Teijin Seiki
📝 yancik said:
Hello, I need assistance with a Texas Instruments 505-2555 that stopped working. I am unable to determine the issue, and we are in need of a replacement or repair urgently. Can you please provide repair information or recommend a repair shop that can help with this specific model? Thank you!
➡️ Reply Texas
📝 Jerry said:
Subject Tamagawa 800123-2r Repair InquiryHi there,Ive been informed that the Tamagawa 800123-2r unit is not working. Could you please provide assistance?Thank you.
➡️ Reply Tamagawa
📝 audrey hall said:
Experiencing loss of pressure on Tecnifor CN212CP/K pressure unit. Need immediate repair assistance to resume production.
➡️ Reply Tecnifor
📝 Tomislav said:
Can you send me the parameters for vigoservo ARS 15-06.Thanks for your help!Tomislav
➡️ Reply Teijin Seiki
📝 Vishal Sojitra said:
Dear Sir/Maam,I have a kitamura mycenter 3xi machine I lost all parameter of vigo servo ARS-15-06.Can you please send me a parameter?It will helpful to me.Please do needful.
➡️ Reply Teijin Seiki
📝 Sales said:
The Techmalux KE/418 lamp is not turning on when the switch is pressed. The issue may be related to a faulty power supply or a burnt-out bulb. If the units value is high, the estimated replacement cost for repair could range from $50 to $100, depending on the extent of the issue and parts needed. It is recommended to seek professional repair services to diagnose and fix the problem efficiently.
➡️ Reply Techmalux
📝 Max said:
I am experiencing a problem with the power switch on my Todd Engineering PS245L unit. The unit does not power on when the switch is toggled. I would like to inquire about repair service for this issue. If the power switch needs to be replaced, please provide me with an estimated cost, especially if the unit is of high value. Thank you.
➡️ Reply Todd Engineering
📝 Scottalume said:
I am experiencing a malfunction with my Teijin Seiki Co. ARS1506 servo control drive unit. The unit is failing to respond to inputs and is not executing the desired commands correctly. This issue is causing disruptions in our production process, leading to delays and potential losses. Based on initial diagnostics, we suspect a fault in the internal components. We are interested in repair services and would appreciate an estimate for the replacement cost to evaluate the most cost-effective solution for our business.
➡️ Reply Teijin Seiki Co
📝 mike navarro said:
I understand that your Topedm MCP001-AA is experiencing an issue. If you could provide more details on what the unit is or isnt doing, it would help us diagnose the problem efficiently. In the event that repairs are necessary, please be advised that replacement costs may vary based on the extent of the issue and the value of the unit. Thank you for reaching out, and we look forward to assisting you with resolving this matter
➡️ Reply Topedm
📝 James P Tucker said:
Thermo King 1E52014G01 controller board not displaying any power or responding to inputs. Need immediate repair service to fix functionality.
➡️ Reply Thermo King
📝 neo kim seng said:
Certainly! Could you please provide more details about the behavior of the Tandberg Data 01-w2755d010 that youve noticed in the warehouse? For example, is it making unusual noises, displaying error messages, failing to power on, or behaving erratically in any way? Any additional information you can provide will help me better understand the issue and assist you in troubleshooting the problem effectively.
➡️ Reply Tandberg Data
📝 Clarkalodo said:
Portable balancer & Vibration analyzer Balanset-1A Description: Price: 7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro 6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro Get a €100 discount on the official website vibromera.eu with promo code VB100 Description of the Balanset-1A Device The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment. Key Features and Capabilities Vibration Meter Mode Tachometer: Accurate measurement of rotational speed (RPM). Phase: Accurately determines the phase angle of vibration signals for precise analysis. 1x Vibration: Measurement and analysis of the main frequency component. FFT Spectrum: In-depth analysis of the vibration frequency spectrum. Overall Vibration: Tracks the overall vibration level. Measurement Log: Saves data for later analysis. Rotor Balancing Mode Single-Plane Balancing: Adjusts rotors in a single plane to reduce vibration. Two-Plane Balancing: Dynamic balancing of rotors in two planes. Polar Diagram: Visualizes rotor imbalance on a polar chart for accurate placement of corrective weights. Last Session Recovery: Enables continuation of the previous balancing session. Tolerance Calculator (ISO 1940): Calculates allowable imbalance according to ISO 1940 standards. Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance. Charts and Graphs Overall Graphs: Visualizes overall vibration levels. 1x Graphs: Represents vibration behavior at the main frequency. Harmonic Graphs: Displays the presence and impact of harmonic frequencies. Spectral Graphs: Visual representation of the frequency spectrum for thorough analysis. Extra Capabilities Archive: Save and access past balancing sessions. Reports: Generate detailed balancing reports. Rebalancing: Facilitates rebalancing with previously saved data. Serial Production Balancing: Suitable for balancing rotors in mass production settings. Supplied with The package contains: A measurement block with an interface. Two accelerometers. Optical sensor (laser tachometer) with magnetic base. Digital weighing scales. Software (laptop can be ordered separately). Plastic carrying case. Price: 7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro 6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro Get a €100 discount on the official website vibromera.eu with promo code VB100
➡️ Reply Thermo King
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.