Welcome to WA

We repair a wide range of WA Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Free Estimates
• Low Prices

No repair summaries available yet for this manufacturer.

Comments for WA

📝 rajeev vashistha said:

Wam 1403901 1403901 CPU Board is failing, affecting the line. Need urgent repair to resume production.

➡️ Reply Wam

📝 John Courtney said:

Hello - we have a Wayne Kerr AMM2002 modulation meter that is in need of calibration. Can you calibrate/certify this unit?Thanks!— Purchase or Repair:

➡️ Reply Wayne Kerr Electronics

📝 Ross Brymer said:

Walty Way B E95-050 Shear Controller is malfunctioning, causing a halt in production. Urgent repair needed to resume operations immediately.— Purchase or Repair:

➡️ Reply Walty Way

📝 hoving said:

The Walty Way B E95-050 Shear Controller malfunctioned today at 230 PM, causing unexpected downtime. Need to know the cause ASAP to prevent further delays.— Purchase or Repair:

➡️ Reply Walty Way

📝 Schuler said:

Please advise if the Walty Way B E95-050 Shear Controller is still supported or if replacement parts are available. Thank you.— Purchase or Repair:

➡️ Reply Walty Way

📝 WEIJDEMULLER said:

Drive or board failure on Walty Way B E95-050 Shear Controller. Urgent attention needed to address the issue— Purchase or Repair:

➡️ Reply Walty Way

📝 Ruddy Triyono said:

Hello, the Walty Way B E95-050 Shear Controller is showing error code E15 and the alarm light is constantly flashing red. Equipment is currently inoperable. Please advise on next steps for troubleshooting and repair. Thank you.— Purchase or Repair:

➡️ Reply Walty Way

📝 Peter Laffan said:

We experienced downtime on the Walty Way B E95-050 Shear Controller earlier today during the morning shift around 1030 am. Can you check what caused the issue and provide an update before the next shift begins? Thank you!— Purchase or Repair:

➡️ Reply Walty Way

📝 Pat Twomey said:

The Walty Way B E95-050 shear controller went down mid-shift. Please check and troubleshoot it during the day.— Purchase or Repair:

➡️ Reply Walty Way

📝 need said:

We had downtime on the Walty Way B E95-050 due to a Shear Controller issue. This occurred during the morning shift around 1030 am. Can you provide guidance on how to prevent this in the future?— Purchase or Repair:

➡️ Reply Walty Way

📝 Brent Morrison said:

Do you repair this board? This is off of a Wallace and TiernanChlorinator. This board positions an acutator and the onboard fuse blows immediately. I have disconnected the positioner output and analog input wires to confirm that the board is the problem. Please let me know if you can repair this board. Thank you.— Purchase or Repair:

➡️ Reply Wallace & Tiernan

📝 Colin Walker said:

Do you have a Walty Way B E95-050 Shear Controller available for sale or repair?— Purchase or Repair:

➡️ Reply Walty Way

📝 Richard Gorner said:

The Waratah Forestry Attachments AS667 Head Module is still down. Please provide an update— Purchase or Repair:

➡️ Reply Waratah Forestry Attachments

📝 drazen said:

It sounds like the Wavetek 2002a unit you mentioned is behaving unusually in the warehouse. Could you provide more details about the specific symptoms or issues you are experiencing with the unit? This information will help me better understand the problem and provide you with appropriate troubleshooting steps. Thank you.

➡️ Reply Wavetek

📝 John Maxwell said:

We experienced unexpected downtime due to a malfunction in the Wandfluh Electronics E01-1D24 / 1.105E__B PCB unit. The issue occurred earlier today, and we need to resolve it— Purchase or Repair:

➡️ Reply Wandfluh Electronics

📝 Kenyon Blott said:

Hello, Im interested in purchasing a Waratah 750-AS651 HTH Logrite controller. Im not 100% sure if this is the right model, but my team recommended reaching out to inquire about pricing and availability. We are looking to source one quickly. Thank you! — Purchase or Repair:

➡️ Reply Waratah

📝 hostnineiit75 said:

Waratah 750-AS651 HTH Logrite controller on unit down mid-shift, need follow-up during the day. — Purchase or Repair:

➡️ Reply Waratah

📝 Gilbert Anguiano said:

Could you please provide information and support for the Waratah 750-AS651 HTH Logrite controller? My client is experiencing issues with it. Thank you. — Purchase or Repair:

➡️ Reply Waratah

📝 Carmelo said:

Im experiencing an issue with the Waratah 750-AS651 HTH Logrite controller. It seems like something has stopped working, but Im not entirely sure what the problem is. Your assistance in troubleshooting this would be greatly appreciated. — Purchase or Repair:

➡️ Reply Waratah

📝 Lindquist said:

Can the Waratah 750-AS651 HTH Logrite controller be repaired or replaced? Im looking to check this off my to-do list. — Purchase or Repair:

➡️ Reply Waratah

📝 Chris Snow said:

Hi, we have a Waratah 750-AS651 HTH Logrite controller that stopped working. Can you please provide us with repair information? We need a quick solution. Thank you. — Purchase or Repair:

➡️ Reply Waratah

📝 Jodie Jessmon said:

Having issues with my Waratah 750-AS651 HTH Logrite controller. Need a repair technician. Unit is not responding to input. Thank you. — Purchase or Repair:

➡️ Reply Waratah

📝 Kevin Ayris said:

the Waratah 750-AS651 HTH Logrite has a controller issue looks like one of the drives or boards just went down. Get someone on it pronto. — Purchase or Repair:

➡️ Reply Waratah

📝 TEIXEIRA said:

I am experiencing some issues with the Waratah 750-AS651 HTH Logrite controller. Something seems to have stopped working, and Im unsure why. Could you please assist me in troubleshooting this problem? Thank you. — Purchase or Repair:

➡️ Reply Waratah

📝 joseph kuberski said:

The controller on my Waratah 750-AS651 HTH Logrite seems to be malfunctioning. Looking for a repair technician familiar with industrial units to fix it — Purchase or Repair:

➡️ Reply Waratah

📝 George Comrie said:

Hello, I am reaching out on behalf of a client who is experiencing issues with a Waratah 750-AS651 HTH Logrite controller. Can you please provide information regarding the troubleshooting and repair process for this specific part? Thank you. — Purchase or Repair:

➡️ Reply Waratah

📝 EL-NET Ireneusz Staniszewski said:

The Waratah 750-AS651 HTH Logrite is currently down with error code E134 displayed on the controller. Please advise on the necessary steps to resolve this issue — Purchase or Repair:

➡️ Reply Waratah

📝 Holzheimer said:

Theres an issue with the Waratah 750-AS651 HTH Logrite controller - looks like one of the drives or boards just failed. Will investigate further and update you shortly. — Purchase or Repair:

➡️ Reply Waratah

📝 MBA said:

The Waratah 750-AS651 HTH Logrite controller unit is not working and needs attention from the maintenance team. — Purchase or Repair:

➡️ Reply Waratah

📝 UMONDAK said:

I can certainly help with that. Could you let me know if the Waratah 750-AS651 HTH Logrite controller is still supported or if parts are available for this older unit? Thank you! — Purchase or Repair:

➡️ Reply Waratah

📝 regis godin said:

Im interested in purchasing the Waratah 750-AS651 HTH Logrite controller. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Waratah

📝 jim liccione said:

Unit A007-1298- REV H experienced downtime during the previous shift. The issue was with the circuit board causing a halt in operations. Please provide an update on what went wrong and when the downtime occurred before the next shift begins. Thank you. — Purchase or Repair:

➡️ Reply Watlow

📝 sopi said:

Hey, just a heads up weve got a failed circuit board (Watlow A007-1298- REV H) on one of the drives. Ive informed the maintenance team for repairs. — Purchase or Repair:

➡️ Reply Watlow

📝 Sini said:

Im sorry to hear that your Watlow A007-1298- REV H circuit board is acting up. It seems like something stopped working, but its uncertain what the issue could be. I recommend contacting a technician for further assistance. — Purchase or Repair:

➡️ Reply Watlow

📝 John Nienhuser said:

Hello, Im interested in purchasing the Watlow A007-1298- REV H circuit board. My team suggested I reach out to inquire about pricing and availability. Could you please confirm both? Im looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Watlow

📝 Greg Rawley said:

Hi, our Watlow A007-1298- REV H circuit board is displaying error code 345. The equipment is not heating up properly. Please advise on next steps. — Purchase or Repair:

➡️ Reply Watlow

📝 Ervins said:

We are experiencing frequent issues with the Watlow A007-1298- REV H circuit board, causing significant disruptions to our production line. Urgent action is needed to resolve this matter — Purchase or Repair:

➡️ Reply Watlow

📝 LA recycling/William said:

Hi there, We have a Watlow 989 989 that has stopped working, and we are in need of a replacement part. Could you please provide us with repair or replacement information as soon as possible? Thank you for your help. Best,— Purchase or Repair:

➡️ Reply Watlow

📝 Ison said:

the Watlow A007-1298-REV H circuit board in unit X failed mid-shift. Please check and troubleshoot in the morning. Thanks! — Purchase or Repair:

➡️ Reply Watlow

📝 Craig Pickenpaugh said:

Hey, I have a Watlow A007-1298- REV H circuit board that needs repair. Its not powering up or responding. Can you fix this type of industrial unit? — Purchase or Repair:

➡️ Reply Watlow

📝 Caleb said:

We are still waiting for a response regarding the Watlow A007-1298- REV H circuit board. The unit is still down. Please provide an update — Purchase or Repair:

➡️ Reply Watlow

📝 Gasch said:

The Watlow A007-1298- REV H circuit board is displaying error code E004 and preventing the heating element from turning on. — Purchase or Repair:

➡️ Reply Watlow

📝 herman hasan said:

The Watlow A007-1298- REV H circuit board is not working. — Purchase or Repair:

➡️ Reply Watlow

📝 Micka said:

the Watlow A007-1298- REV H circuit board went down mid-shift. Needs attention ASAP! - Night shift crew — Purchase or Repair:

➡️ Reply Watlow

📝 Ramanamapamonjy Rivosoa said:

Do you have a Watlow A007-1298-REV H circuit board available for sale or repair? Our unit is down, and we need to keep production running. — Purchase or Repair:

➡️ Reply Watlow

📝 outletaykxb said:

The Watlow A007-1298- REV H is a circuit board unit that isnt working properly. Thats the information I received from the maintenance team. — Purchase or Repair:

➡️ Reply Watlow

📝 Vidal said:

I have a Watlow A007-1298-REV H circuit board that needs repair. Its not functioning properly and I need to get it fixed as soon as possible. Thank you. — Purchase or Repair:

➡️ Reply Watlow

📝 David Zimmerman said:

Could you please confirm if the Watlow A007-1298- REV H circuit board can be repaired or needs to be replaced? Trying to check this off my to-do list. Thank you! — Purchase or Repair:

➡️ Reply Watlow

📝 SOLDI said:

Please provide more details about the Watlow A007-1298- REV H circuit board. We would like to inquire if this unit is still supported or if replacement parts are available. Thank you. — Purchase or Repair:

➡️ Reply Watlow

📝 Tom ONeil said:

Hello, I am interested in purchasing a Watlow A007-1298- REV H circuit board. Could you please provide information regarding its pricing and availability? I am looking to source one quickly. Thank you. — Purchase or Repair:

➡️ Reply Watlow

📝 Flaherty said:

The Watlow A007-1298- REV H circuit board on Unit X malfunctioned, causing it to go down mid-shift. Please inspect and address the issue during the day shift. — Purchase or Repair:

➡️ Reply Watlow

📝 Azzam said:

The Watlow A007-1298- REV H circuit board malfunctioned this morning causing unplanned downtime in the unit. The issue occurred around 630 am, impacting production. Need a quick resolution before the next shift starts. — Purchase or Repair:

➡️ Reply Watlow

📝 Cho, said:

the circuit board on our Watlow A007-1298- REV H just failed. Need to get a replacement ASAP to keep operations running smoothly. — Purchase or Repair:

➡️ Reply Watlow

📝 Behring said:

Can you please confirm if the Watlow A007-1298-REV H circuit board is still supported or if replacement parts are available? Its an older unit and we are unsure of the manufacturer. Thank you. — Purchase or Repair:

➡️ Reply Watlow

📝 Shepardson said:

We are experiencing a persistent Error Code E005 on the Watlow A007-1298- REV H circuit board. This error is causing the equipment to shut down intermittently. Please advise on troubleshooting steps or next actions. Thank you. — Purchase or Repair:

➡️ Reply Watlow

📝 Marty Ward said:

Please provide a detailed quote for repair services for a Watlow A007-1298- REV H circuit board. Thank you. — Purchase or Repair:

➡️ Reply Watlow

📝 Dylan Mueller said:

The equipment is not functioning, displaying error code 003. Suspect an issue with the Watlow circuit board (A007-1298- REV H). Need urgent assistance to troubleshoot and repair. — Purchase or Repair:

➡️ Reply Watlow

📝 John Nienhuser said:

The Watlow A007-1298-REV H circuit board is not working. — Purchase or Repair:

➡️ Reply Watlow

📝 MULENGA said:

Could you please confirm if the Watlow A007-1298-REV H circuit board is still supported or if replacements or repair options are available? This unit is older, and we are unsure of the manufacturer. Thank you. — Purchase or Repair:

➡️ Reply Watlow

📝 francisco said:

The Watlow A007-1298- REV H circuit board malfunctioned today at 345 PM, causing unexpected downtime. Need urgent assistance before the next shift. — Purchase or Repair:

➡️ Reply Watlow

📝 Prayogi said:

The Watlow A007-1298-REV H is a circuit board unit that is currently not functioning as expected. — Purchase or Repair:

➡️ Reply Watlow

📝 Norm Bracken said:

Hi, I have a Watlow A007-1298- REV H circuit board that needs repair. Its not powering on and seems completely dead. Can you fix it? Thanks. — Purchase or Repair:

➡️ Reply Watlow

📝 Mr James Pryce said:

Hello, Im following up on the Watlow A007-1298- REV H Circuit Board. Can this be repaired or replaced? Im looking to check this off my to-do list. Thank you. — Purchase or Repair:

➡️ Reply Watlow

📝 woolnough said:

The unit with the Watlow A007-1298- REV H circuit board is exhibiting abnormal behavior displaying random error messages, blinking lights, and intermittently restarting. — Purchase or Repair:

➡️ Reply Watlow

📝 TP SINGH said:

Im new here and not entirely sure what the WATLOW PC20-F25C-00AD POWER CONTROL does, but I was told its not working. Can you provide more details about the issue?— Purchase or Repair:

➡️ Reply Watlow

📝 MARCIAL BLANDON said:

Watlow 965A-3DD0-00GR showing no power and not responding to controls. Need urgent repair assistance.— Purchase or Repair:

➡️ Reply Watlow

📝 JAYARAJAN.C.N said:

Need assistance with my Wavetek 2002a. Unit showing error message or not powering up. Looking for repair service as soon as possible.

➡️ Reply Wavetek

📝 John Baskin said:

Im having trouble with a Ward 132097 machine I think thats what its called. Its not working properly, but Im not exactly sure what its supposed to do. Can you please help me figure out what might be wrong with it? Thank you.— Purchase or Repair:

➡️ Reply Ward

📝 Jin-Yeon said:

Hey, our Wagner Magnete 752 LT/E6 is displaying Error Code 203. Its not functioning properly and needs immediate attention. Please advise on next steps to get it back up and running. Thanks!— Purchase or Repair:

➡️ Reply Wagner Magnete

📝 Zodiacfml said:

The Warner Electric TCS 200 Tension Controller unit in the warehouse is exhibiting abnormal behavior.— Purchase or Repair:

➡️ Reply Warner Electric

📝 leila said:

Do you have a Wagener 787-842 Switched Mode Switching Power Supply 20A available for sale or repair to help with our production needs?

➡️ Reply Wagener

📝 CASTELLANI said:

There seems to be an issue with the Walker Scientific ATS-6044T unit. Maintenance team needs to take a look.— Purchase or Repair:

➡️ Reply Walker Scientific

📝 Khayatjafari.Hossein said:

The Waratah 750-AS651 HTH Logrite controller is not operating correctly. It is exhibiting unusual behavior that is outside of its normal functioning.— Purchase or Repair:

➡️ Reply Waratah

📝 Walter Piszczek said:

The Waratah Forestry Attachments AS667D unit experienced downtime today due to issues with the Head Module. This occurred at 1245 PM during the shift. Can you provide a quick update on the situation before the next shift comes in?— Purchase or Repair:

➡️ Reply Waratah Forestry Attachments