Welcome to Weko

unofficial service & repair forum

We repair a wide range of Weko Equipment.

Ask questions, or call 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.


Why to send us your work?

To receive more information about your unit then fill out the email form below
and we will be in contact with you within 24 hours.

🛠️ Common AI Repair Summaries 🏭

🔧 Weko 60-5493-12-3()

The Weko 60-5493-12-3 is a multi-function industrial electronics repair device commonly used for troubleshooting and repairing electronic circuits and components in various industrial equipment. This model is equipped with advanced diagnostic tools such as oscilloscope functions, frequency measurement capabilities, and signal analysis features. Key features of the Weko 60-5493-12-3 include high precision measurement accuracy, compatibility with a wide range of electronic components, and a user-friendly interface for ease of operation. Common failures associated with the Weko 60-5493-12-3 may include display malfunctions, faulty input/output ports, and issues with internal circuitry such as power supply failures or malfunctioning components. Regular maintenance and calibration are essential to ensure the device's optimal performance and accuracy in industrial electronics repair tasks.

  • Part: 60-5493-12-3
  • Est. Repair Price: $1,250.00 (est.)
🔧 Weko (Sensor)

The Weko sensor is an industrial electronic device designed to measure and detect various physical parameters in a manufacturing process, such as pressure, temperature, flow, or position. It features high precision and accuracy to ensure reliable operation. Common failures in the Weko sensor may include signal instability, calibration issues, or sensor element degradation, resulting in inaccurate readings or complete sensor failure. Regular maintenance and calibration are essential to ensure optimal performance and longevity of the Weko sensor.

  • Part:
  • Est. Repair Price: $1,550.00 (est.)
🔧 Weko KD-NR:HDM 5E.110.1481/01 (sensor)

The Weko KD-NR:HDM 5E.110.1481/01 sensor is designed for industrial applications to detect various parameters, such as temperature, pressure, or motion. This sensor features high accuracy and reliability in capturing critical data for process control and monitoring. Typical failures in this sensor may include sensitivity degradation, signal distortion, or communication errors, often necessitating recalibration or component replacement to restore functionality.

  • Part:
  • Est. Repair Price: $250.00 (est.)
🔧 Weko 60-5493-12-3 (Unknown)

The Weko 60-5493-12-3 is a power supply unit commonly used in industrial applications. Its primary purpose is to convert AC voltage into DC voltage to power electronic circuits and devices. It features a compact design, high efficiency, and reliable performance. Typical failures of the Weko 60-5493-12-3 could include blown fuses, bulging capacitors, shorted diodes, or loose connections. These failures can lead to voltage fluctuations, overheating, or total loss of power output. Regular maintenance and voltage testing can help prevent these issues.

  • Part:
  • Est. Repair Price: $2,002.00 (est.)
🔧 Weko 200250()

The Weko 200250 is a high-frequency industrial electronics welder designed for welding thermoplastic materials. It features variable power output and adjustable welding parameters to accommodate different material thicknesses and types. Common failures in this model include overheating due to prolonged usage at high power levels, component failures in the power supply circuitry, and issues with the electronic control system leading to inconsistent welding results. Regular maintenance and periodic inspections are recommended to ensure optimal performance and extend the lifespan of the device.

  • Part: 200250
  • Est. Repair Price: $11,300.00 (est.)
🔧 Weko KD-NR:HDM 5E.110.1481/01 NR:140.172485/23 0044401(Sensor)

The Weko KD-NR:HDM 5E.110.1481/01 NR:140.172485/23 0044401 is a sensor used in industrial applications. This sensor is designed to detect specific parameters such as temperature, pressure, level, or flow within a system. It features high precision, reliability, and durability to withstand harsh industrial environments. Typical failures of this sensor may include signal drift, sensitivity issues, or physical damage due to environmental factors. Regular maintenance and calibration are recommended to ensure its accurate and continuous operation.

  • Part: NR:140.172485/23 0044401
  • Est. Repair Price: $2,750.00 (est.)
🔧 Weko HBM 5E.110.14B1/01 (Control Unit)

The Weko HBM 5E.110.14B1/01 is a control unit commonly used in industrial settings for regulating various processes such as production lines and machine operations. It is designed to provide precise control over parameters such as speed, temperature, and pressure through its user-friendly interface and programmable settings. Common failures in this control unit include power supply issues, faulty input/output signals, and software malfunctions. Regular maintenance and troubleshooting are necessary to ensure optimal performance and reliability.

  • Part:
  • Est. Repair Price: $2,750.00 (est.)
🔧 Weko AA 7904(Sensor)

The Weko AA 7904 sensor is used in industrial applications to detect specific environmental conditions or material properties. It typically features a durable construction, high precision sensors, and reliable signal outputs. Common failures in this sensor may include damaged sensor elements, faulty wiring connections, or signal output inaccuracies. Regular calibration and maintenance are recommended to ensure optimal performance.

  • Part: 7904
  • Est. Repair Price: $1,950.00 (est.)
🔧 Weko KD-NR:L.005.341.4 (optical sensors)

The Weko KD-NR:L.005.341.4 is an optical sensor used in industrial applications. It is designed to detect the presence or absence of objects using light beams. This sensor features a high-speed response time, accurate detection capabilities, and a long operating life. Common failures in optical sensors like the Weko KD-NR:L.005.341.4 include damage to the light emitter or receiver components, contamination of the optical surfaces, and misalignment of the sensor. Regular maintenance and proper installation are essential to ensure optimal performance of this device.

  • Part:
  • Est. Repair Price: $1,250.00 (est.)
🔧 Weko 7908 (Sensor)

The Weko 7908 sensor is used in industrial applications to detect presence, position, or movement of objects within its sensing range. It is known for its high accuracy and reliability in various industrial environments. Typical failures of the Weko 7908 sensor may include damaged cables, sensor head malfunctions, or electronic circuit failures resulting in inaccurate detection or complete sensor failure. Regular maintenance and calibration are recommended to ensure proper functioning and longevity of the sensor.

  • Part:
  • Est. Repair Price: $1,550.00 (est.)

Comments for Weko

6 comments found.
📝 DENNIS WENTLING said:
I HAVE A 1970S ERA SOLNA WEB, WE RUN WEKO WEB BREAK DETECTORS WHICH ARE MOUNTED ON A BAR AND SCAN THE PAPER FOR BREAKS. I DO NOT KNOW THE MODEL NUMBER BUT THEY ARE IN DIRE NEED OF REPAIR, MORE THAN LIKELY BROKEN WIRES FROM YEARSOF USE. IS THERE ANY WAY I CAN GET A QUOTE OR A RESONABLE IDEA OF WHAT PRICE I AM LOOKING AT HERE??????
➡️ Reply Weko - Weitmann & Konrad GmbH
        
📝 ATEF OSMAN said:
WEKO 911103111A HE25 FOR HIEDELBERG PRINTING MACHINEHD102ZP521084 SPEED MSTER
➡️ Reply Weko - Weitmann & Konrad G
📝 marwan hassan said:
dearsim electrical engineer in printing company and i have a problem in a printing machine miller tp 104 in electronic monitoring system sheetfeed control and its photocells .the are dameged and im lookink to repair or buy a new system .so im asking you please how could i get your help about my problem .and thank you very much.with best regardsm-alfatlawi 3-10-2007
➡️ Reply Weko - Weitmann & Konrad GmbH
        
📝 Faheem Sharif said:
we are looking WEKO Photocell for our Heidelberg SORK 1983 machinewith the connecting cord.Please let us know if you an provide this itemThe Part NO in Heidelberg Catalogue is 110.1321) & 890.010ThanksFaheem Sharif
➡️ Reply Weko - Weitmann & Konrad G
        
📝 Cherry said:
In my Weko - Weitmann & Konrad GmbH electronic monitoring system for miller tp 104 in this system got burn when we run for 10 hours, how much it will cost for new one and how many days itll get.my mobile no 0094 71 6805549Best regardsCherry
➡️ Reply Weko - Weitmann & Konrad G
📝 Asim said:
Need model no. T6-03S for PO25 Super 1col. offset machine, India.
➡️ Reply Weko - Weitmann & Konrad GmbH
        
📝 Mr.vijaykumar said:
part no. EI -HRN110350 ART NR 17613NR.216 1134256/006
➡️ Reply Weko - Weitmann & Konrad G
        
📝 Ricardo said:
Dear sirs, Will you please send us information if you have in stock 1pc (one) power supply Model WECO HE25, type 7811, 20VAC @ 0.4Amp 50-60Hz for a Heildelberg printer Mod. MOZP-102, it may be remanufactured. Please send us prices including delivery time and shipping charges to Miami, Fl.Best regards,Ricardo, Purch. Department.ventas@electronicaaudio.com
➡️ Reply Weko - Weitmann & Konrad G
        
📝 Jiri Benesovsky said:
Have you on your store this capacitance detektor: CTK03 EDV NR7782 + 30Thank for your answer!Best regardsIng. Jiøi BenesovskyAZUS Bøezova, s.r.o.U Pøadelny 88357 03 SvatavaCZECH REPUBLICT: +420 352 605 508F: +420 352 627 781M: +420 603 887 052E: benesovsky@azus.cz
➡️ Reply Weko - Weitmann & Konrad G
        
📝 jerry asare asante said:
Dear Sir/Madam, please i need an electrical part of my offset printing machine called MILLER TP 41 the part name and numbers is as fellows: CHASSIS + BESTUCKUNG as indicated on the circuit diagram1) TSV 042 DBK II 2) TSV 020 AFKI I3) TSV 010 BK IIIPlease this are the three electrical part that i need, incase you deal with this items please keep intouch with me, thanks and hope to hear from you soon.
➡️ Reply Weko - Weitmann & Konrad G
        
📝 Wegener Nieuwsdruk Twente said:
Can you please send us an indication of price of:Weko papercontroleye nr. 514.284700/015Weko art.nr. 202202 type RLT
➡️ Reply Weko - Weitmann & Konrad G
        
📝 Rahul Printers said:
Dear our Macehian uncomplet, i request please chuqu macehinContact No. 9929103452, 9694088818
➡️ Reply Weko - Weitmann & Konrad G
        
📝 Nicolas Arbelaez said:
Dear sir:Please let me know if you may repair it. it is used on printing pressMiller TP 29s, aprox cost lead timeand complete addressthanksNicolas
➡️ Reply Weko - Weitmann & Konrad G
                
📝 Pedro G Li said:
Dear sir:Please let me know if you may repairit. it is used on printing pressMiller TP 74s, aprox cost lead timeand complete addressthanksPedro G Li
➡️ Reply Weko - Weitmann & Konr
                
📝 LOIC said:
Hello,I am looking for a box Weko 200430 for my miller TP74 of 1989cordiallyL. Valotto
➡️ Reply Weko - Weitmann & Konr
        
📝 Jordanco said:
HelloIm Jordanco and I work on TV repairs. I have one machine part TYPE E703.5 . Can you send me schematic diagram for that type? Thank you
➡️ Reply Weko - Weitmann & Konrad G
        
📝 Romuald Starosielec said:
We kindly inform you that we are lookingfor WECO No. 8010 for inking unit control in machine TP 104-5 Unimatic C3, age 1990Could you offer us such Weco systemThanks and best regards Romuald StarosielecPPUH POLIGRAFIA Ltd.Warsaw / Polandphone 0048 22 826 89 40phone / fax 0048 22 827 23 06
➡️ Reply Weko - Weitmann & Konrad G
        
📝 flohersfeld said:
Florian Grotehans, Am Baumgarten 12, 36251 Bad Hersfeld, hat bereits die folgenden Firmen in die Pleite gerissen: 1. T-C-H Service GmbH & Co KG 2. HSG Communication GmbH Florian Grotehans gibt vor, pleite zu sein, macht aber weiterhin Geschafte und lebt auf großem Fuß. Ist das strafbar? Wenn er de Glaubigern Vermogen entziehen wurde, wurde er sich ja strafbar machen, oder?
➡️ Reply Weko - Weitmann & Konrad G
📝 Dennis Campbell said:
We have a Heidelberg printing press with a Weko control box.AFK-BK-SE 03Art.: 007664E800937 /001220/60/24/5.5V 50-60HzNDM 58.110.031/U01When the press failes to send a sheet of paper properly into the in-feed the control box is supposed to send a signal to take the machine off of impression, stop the feeder, and slow the machine down to idle speed. It does this by sensing the absence of a sheet at the in-feed via ectric eyes and energizing a contactor in the main electrical box.The above is not happening on an intermittant basis.Could you give me an approximate cost and amount of time to effect a repair?Thanks,Dennis
➡️ Reply Weko - Weitmann & Konrad GmbH
        
📝 bobby goldstein said:
there are a few things to check first,being press trip sometime the first thing id look for is a cold solder joint or burt contacts on the output relay, also the intergation sensor could be going bad
➡️ Reply Weko - Weitmann & Konrad G
        
📝 Ruthie Chan said:
would it be possible for you to supply me an electrical diagram for this box. on the lefthand side of the box there are 4 sockets in which all wires dropped out already. is it possible for you to repair this or supply me an electrical diagram so i can do the repair here? thanks alot
➡️ Reply Weko - Weitmann & Konrad G
        
📝 Md. Shahnewaz said:
Excellent company. ..
➡️ Reply Weko - Weitmann & Konrad G
        
📝 Kenny Koch said:
Need to have a weko 180102 repaired
➡️ Reply Weko - Weitmann & Konrad G
📝 NADEEM IQBAL said:
sir i need weko BAE 68.110.1311A ELECTRIC BOX FOR HEIDELBERG MODEL SORK 1980
➡️ Reply Weko - Weitmann & Konrad GmbH
📝 Robert keith said:
Control unit on Weko HBM 5E.110.14B1/01 not responding to input signals. Need immediate repair service to diagnose and fix the issue.
➡️ Reply Weko
📝 MR PATRICK said:
we want to buy this weko photo sensor.Type RLSART-NR:200071we want to buy this sensor, the voltage is 11- 30 vdc.the quantiy is 5 pcs.we need the price and delivery time .best regardmr patrick
➡️ Reply Weko - Weitmann & Konrad GmbH
📝 Tom Ratliff said:
I have a WEKO photo eye off of a Miller press. I believe the part number is 075782. Can you repair or replace?
➡️ Reply Weko - Weitmann & Konrad GmbH
📝 GERARDO DELGADO CONTRERAS said:
BUENAS TARDES TENGO QUE REPARAR DOS CAJAS WEKO QUE REGULAN LA VELOCIDAD DEL DRYVER DE AGUA DE MAQUINA MILLER Y 2 CAJAS WEKO DETECTORES DE HOJA Y 2 WEKO PONE PRESION WEKO DETECTOR DE HOJA ART. 075780 829.398459/004 14-30V AC/DCWEKO CONTROL DE VELOCIDAD ART 202016 338.323395/011 220V 50-60HZWEKO PONE PRESION ART 73321 202.307970/002 220V 50-60HZ
➡️ Reply Weko - Weitmann & Konrad GmbH
📝 william brady said:
i have a weko reference board 7526 # e8301253/6 .andreference 7527 and encoder 7500/b=1950 and reference 73324 items that need repair or replaced i am in the eastern time zone of the us an the boards are in bogota columbiathank you bill brady
➡️ Reply Weko - Weitmann & Konrad GmbH
📝 Omar Arias said:
this box 2 make smokes, and two capacitors leak
➡️ Reply Weko - Weitmann & Konrad GmbH
📝 Mike Hightman said:
Hi - Do you repair Weitmann & Konrad control boxes for Miller printing presses?
➡️ Reply Weko - Weitmann & Konrad GmbH
📝 Ralf Gebert said:
Dear Sir/MadamWe have come across a old WEKO SUM-7295 unit, and it seems that the sensors (opposed mode Tx/Rx) are faulty, and need a manual to see what the interface unit needs on the input side. Is it pull down(npn) or pull up (pnp), hence the requirement for a manual.Your assistance is appreciated.RalfPlease respond via e-mail, as I am not in the office
➡️ Reply Weko - Weitmann & Konrad GmbH
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.