Welcome to Westronic

We repair a wide range of Westronic Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Fair Estimates
• Low Prices

🛠️ Common AI Repair Summaries 🏭

Comments for Westronic

📝 Joe Harvat said:

Looking for repair service for a malfunctioning Westronics CB100351-01 MUX 64 Point unit. experiencing intermittent signal loss and data transmission issues. Need assistance urgently.

➡️ Reply Westronics

📝 david suh said:

==Urgent==To whom who may concered- ==Urgent==As we are one of the user of the Westronics: Model DDR10 & Part PA100056-01 Power Supply Cards , there was power problem. The fuse was out of order & we have changed to new one(same specification from original sources) for 3 times.( Replaced the original Fuse 1 :3A 250volt/312, F with 3A 250 volt/P, F )But still no power supplying to the above card. We dont know the reason of power problem.Im wondering the above non-power supply problem is from the other parts or from this power supply cards kit. Could you advise whether we can check the other parts before we send the above parts?( model DDR 10 is connected with H.I.P Equipment( Hot Isostatic Press : ABB company)We wanna send the above parts to you for repairing after checking.Your advise will be highly appreciated.1. Is there any difference the repairing charge - DDR10 & Part PA100056-01 Power Supply Cards -$275 - only Part PA100056-01 Power Supply Cards -??2. How long it will take for repairing?3. We will send the parts by courier sevice & it will take app.3 days .4.Pls let us know the payment terms.Thanks for your kind attention & cooperations.Sincerely YoursDavid Suh/Mnaging DirectorContact InformationA-One Company456 SHIN HYUN RI, OH PO EUP, KWANG JU CITY, KYUNG KI DO, 464-895 KOREAe-mail: swissten@unitel.co.krTel+82-31-718-7274/ Fax+82-31-718-8107-----------------------------------------Replaced the original Fuse 1 :3A 250volt/312, F with 3A 250 volt/P, F

➡️ Reply Westronics

📝 Sharon Casey said:

I am a business customer with a Westronics SM100 Servo Drive unit that is not functioning properly. The unit is failing to respond to commands, resulting in erratic movements and inconsistent performance. Based on the initial assessment, the repair cost is estimated to exceed $1000 due to the complexity of the servo drive system.

➡️ Reply Westronics

📝 Tasha Chapman said:

In order to comply with the Duke Energy internal Asbestos Policy, we are required to insure that no products or components containing asbestos are procured. We are contacting all Duke Suppliers of valves, pump, motors, and actuators to obtain a statement via e-mail or fax that their company does not supply asbestos containing components. This information can be e-mailed to sjbostia@duke-energy.com or faxed to (980) 373-9729. If you have questions or need clarification, please call Tasha at (704) 875-5868. Please send your response within two weeks. Thanks in advance for your cooperation.

➡️ Reply Westronics

📝 Joe Sayre said:

We received new printed circuits P/N CB100161-02 for a Westronics DDR10 Recorder. The new circuits are stamped with a Rev. H. the previous Circuits were stamped with Rev.D.I need help what is the difference in design change between Rev. D and Rev.H. Are there drawings available for both board revisions showing the design changes?Thank you, Joe Sayre

➡️ Reply Westronics

📝 Naseem Ahmad said:

Dear Sir,We would like to inform you that,Digital Data recorders has already installed at Power Plant in pakistan and I am looking source of Westronics company who can supply spare parts for DDR-3200 if yes then please complete e-mail address for company so that,we will start sending inside information.We await your quick reply/action.Best RegardsNaseem Ahmad

➡️ Reply Westronics

📝 Henning Hamann said:

Hallo,I need the price and the availability for a Grounding resistance montitor, Supply Voltage AC 110V 60Hz, for 440V bus,Serieal No.: 9C09106, Type SBAG-102 Main switch borad# M4-823541Built in 1999, Manufacturer WestronicsSeobu el KoreaI Need the price for a new one.I Hope you can help me.RegardsH. HamannMehr Technical Service GmbHHamburg - Germany

➡️ Reply Westronics

📝 stuart Rudge said:

Hello sales, are Westronics still in business? I have searched the internet but coming up with nothing apart from a few sites. I am looking for a Grounding resistance monitor type: SBDG 241.I require price & delivery for 1 piece to Southampton, UK.Regards Stuart Rudge

➡️ Reply Westronics

📝 mariolis georgios said:

Good day Sir/Mr(s)I would like to find the manual concerning the terminals of the model above but unfortunatelly i cant.I would appreciate if you could mail me this document.Thank you in advanceMariolis Georgios

➡️ Reply Westronics

📝 Asheen Inderpal said:

Good day,I have an enquiry to quote for the following items:1)GROUNDING RESISTANCE MONITOR(INSULATON),MANUFACTURER:WESTRONICS/SEOBU ELECTRONICS- 102,AC110V60HZ,5UA. QNTY:12)GROUNDING RESISTANCE MONITOR :CO-SBG-241D,DC19-30V.0.001-0.2MOM ALARM.QNTY-1,MADED,WESTRONICS./SEOBU ELECTRONICS3)GROUP ANNUNCIATOR:CO-SA-6PSM,24V,0.30 SEC. QNTY – 1Kindly advise if you you can supply.Regards,Ash

➡️ Reply Westronics

📝 ACE IVEY said:

PLEASE ADVISE, I NEED INFORMATION ON PRICING AND AVAILABILITY ON THE FOLLOWING ITEM:EARTH GROUNDING RESISTANCE MONITOR, MAKE: WESTRONICSTYPE: SBAG-202MANY THANKS FOR YOUR ASSISTANCE ON THIS MATTER. I AM LOOKING FORWARD TO YOUR SOONEST REPLY.

➡️ Reply Westronics

📝 k johnpaul said:

One of our sensor monitor out put is -5 MA against the full scale out put of 1 MA. The sensor is in alarm condition. The insulation indicator needle is in the -ve direction, kindly advise.

➡️ Reply Westronics

📝 Geir Mordal said:

Good morning Madames / SirsWe do have a request for following:Ground Resistance monitor.1 pc. SBAG-202 External meter FS 1 rnACan you provide us with quote / delivery time of this.Thanks in advance.Best regardsGeir Mordal

➡️ Reply Westronics

📝 Richard Zelm said:

Can you please tell me what the measurement voltage is that the SBAG Ground Monitor uses to monitor the insulation? Is it 24 VDC? I cant find anything in their specs that tells you what the output voltage is that monitors the insulation. Thanks!

➡️ Reply Westronics

📝 Olejnik Leszek said:

Manual and documentation for PCB

➡️ Reply Westronics

📝 Russell Harriman said:

Hello,I am looking to purchase a replacement unit as well as circuit board cards for The Westronics line fault detector models LFD-10P and LFD-6P. Ships Superintendent

➡️ Reply Westronics

📝 Naresh Santal said:

Respected Sir/MadamI have purchased one power addepter ( O/P +24 V, 2A) from the market.I want to know that whether these westronics made addepters are made specialy for ALLWIN water purifires.

➡️ Reply Westronics

📝 Richard Swain said:

Need 1pcs of ZA-100036-01MAGAZINE CHART

➡️ Reply Westronics

📝 Cornleis (KC) Kome said:

I have a Westronics Model SVC chart recorder, ser no. 2675, (1/99) and can not find the WGetData 3.5 floppy that came with the unit, can you provide a copy of it, thanks !!!

➡️ Reply Westronics

📝 Jim Lee said:

We have a Westronics 3200 Temperature scanner, S/N 1088, wed like to know if it could be repaired? It may need chart drive motor, P/N MA100018-01,circuit board, P/N CB100341-04, printhead cartridge motor, P/N MA100015, and power supply, ZB100798-01. The MUX would be sent with unit, not sure if its bad or not. It seems like most of our issue is that the printer doesnt work. Let me know if you think you might be able to repair. Thanks, Jim

➡️ Reply Westronics

📝 Vision said:

Dear Sirs, We are the company in Qingdao of China, we need the machines of your company as follows:micom timer (slim type) type GTN ¨C S1, range 0,1s ¨C 1h 24VDC, 110/240VAC please kindly send us the quote to Qingdao as soon as possible! with kind regards

➡️ Reply Westronics

📝 Dmitry Gavrilenko said:

Good DayPlease give me a Users Manual for the above mentioned line falt detector. I have to modify the existing circuitry in my switchboard to make it fail-to-safe. This unit has been retrofitted and I cannot see any data onboard.thanks in advance

➡️ Reply Westronics

📝 john and anna scarle said:

Hello, the Westronics 3000 is not powering on. Looking for assistance with diagnosing and fixing this issue

➡️ Reply Westronics

📝 J.Y. HENRY said:

Subject Repair Inquiry for Westronics 3000 PrinterHello,I am reaching out on behalf of our client with a Westronics 3000 Printer (part number not available) that is experiencing some issues. The printer is not functioning properly and is in need of repair. Could you please provide information on the repair process, cost estimate, and turnaround time for resolving this problem?Thank you for your assistance.Best regards,

➡️ Reply Westronics