Welcome to X

We repair a wide range of X Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Free Estimates
• Low Prices

🛠️ Common AI Repair Summaries 🏭

Comments for X

📝 ian pierce said:

: Our industrial unit is experiencing issues with the hydraulic system that controls the automated packaging line. The current problem is causing intermittent halting of production and inaccurate package sizes. The unit typically handles quantity packages per hour, but its been struggling to maintain this speed for the past two weeks due to inconsistent packing performance. We estimate a replacement unit would cost between $50,000-$70,000, depending on the specific model and features we need. We are looking at our options and seeking your expertise to determine if repair or replacement is the most efficient solution.:— Purchase or Repair:

➡️ Reply Xynetics Inc

📝 Kelly said:

I have a Xynetics Inc. 103804 board that is not functioning properly. When powered on, the unit does not display any signs of activity no lights are illuminated, and there is no response from connected devices. I have checked the power source and connections, but the board still remains unresponsive. I suspect there may be an internal issue that requires repair. Based on initial assessment, the estimated replacement cost for the Xynetics Inc. 103804 board is approximately $200 to $300, but I would prefer exploring repair options first before considering a full replacement. Any guidance or assistance in diagnosing and resolving this issue would be greatly appreciated.— Purchase or Repair:

➡️ Reply Xynetics Inc

📝 Freddy Naranjo said:

Hello, I am inquiring about the XPiQ Inc. A6 10000051 power supply. My client is experiencing issues with it and is seeking assistance. Can you provide information on the repair process and estimated cost for fixing this specific model? Thank you. — Purchase or Repair:

➡️ Reply XPiQ Inc.

📝 thomas said:

The XPiQ Inc. A6 10000051 unit is currently not working and needs attention from the maintenance team. — Purchase or Repair:

➡️ Reply XPiQ Inc.

📝 David Karr said:

The power supply for my XPiQ Inc. A6 10000051 is down. No power indicated on the unit, and all connected devices are non-functional. Kindly advise on troubleshooting steps or potential causes. Thank you. — Purchase or Repair:

➡️ Reply XPiQ Inc.

📝 Peter Krissilas said:

Hey team, just to inform you that the XPiQ Inc. A6 10000051 power supply unit malfunctioned earlier today, leading to unexpected downtime. This occurred at approximately 230 PM during our shift. Need a quick update before the next team takes over. Thanks! — Purchase or Repair:

➡️ Reply XPiQ Inc.

📝 Jeff Picha said:

Hello,Ive been informed that the XPiQ Inc. A6 10000051 power supply unit is not working.Thank you. — Purchase or Repair:

➡️ Reply XPiQ Inc.

📝 MEDINA said:

On 03/15/2023, at 630 PM, we experienced downtime due to the XPiQ Inc. A6 10000051 power supply unit malfunctioning. Requesting urgent attention before next shift. — Purchase or Repair:

➡️ Reply XPiQ Inc.

📝 Perry Williams said:

Do you have a replacement power supply available for the XPiQ Inc F8C6A6A6 10002755 unit? We need it urgently to keep production running. — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 Awais said:

The XPiQ Inc F8C6A6A6 10002755 power supply unit is exhibiting unusual behavior in the warehouse. It is not functioning as expected and is acting erratically. — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 Shelton said:

Can the XPiQ Inc F8C6A6A6 10002755 power supply be repaired or bought? Im trying to check this off my to-do list. — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 hydrodynamic epuipme said:

The XPiQ Inc F8C6A6A6 10002755 unit is experiencing issues with its power supply. Please investigate and address the problem — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 Izham Ismail said:

Hello, Im inquiring about the XPiQ Inc F8C6A6A6 10002755 power supply unit. We are looking to find out if this unit is still supported and if replacement parts are available. Kindly provide us with any information you have regarding this matter. Thank you. — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 poccal said:

The XPiQ Inc F8C6A6A6 10002755 power supply unit is exhibiting unusual behavior. — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 mike rud said:

Can you repair or supply a new unit for my XPiQ Inc F8C6A6A6 10002755 power supply? Production is down, and we need your help to get it running again. Thank you. — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 Jerry Jonathan said:

I have an XPiQ Inc F8C6A6A6 10002755 power supply that needs repair. Its not turning on or providing power to the equipment. Can you assist with this? — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 Widdy Loo said:

Please provide more information about the XPiQ Inc F8C6A6A6 10002755 power supply unit so we can check if its still supported or if replacement parts are available. Thank you. — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 woo juin hoong said:

Drive or board failure on XPiQ Inc F8C6A6A6 10002755 power supply unit. Immediate action needed to troubleshoot and replace the faulty component. — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 Maha Al Ma\'any said:

Dear Sir ,, weneed o contact the sales for quote the below QTY 1 XERTEX _PE_REF : ASSY P/N 921243-213 DELTA CHLORINE ANALYZER ,MODEL 924 , TAG AI-006 XERTEX OLD P/N : 8124-105P , DRAWINGS FIG 17 P-45 QTY 1 XERTEX _PE_REF : ASSY P/N 921243-213 DELTA CHLORINE ANALYZER ,MODEL 924 , TAG AI-006 XERTEX OLD P/N : 824240, DRAWINGS FIG 17 P-45— Purchase or Repair:

➡️ Reply Xertex Corp

📝 Neal said:

Hello, could you please provide repair info for XPiQ Inc F8C6A6A6 10002755 power supply? It stopped working and we need a replacement. Thank you. — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 Suwanprasom said:

Machine is not receiving power. — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 Sylvest said:

Equipment ID XPiQ Inc F8C6A6A6 10002755Symptom Power supply failureAction required Urgent repair needed. Please provide assistance as soon as possible. Thank you. — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 Francesco Baldassa said:

Hello, Can the XPiQ Inc F8C6A6A6 10002755 power supply be repaired or replaced? Im trying to check this off my to-do list. Thank you. — Purchase or Repair:

➡️ Reply XPiQ Inc

📝 Freddy Calizaya said:

: Our industrial unit has been experiencing issues with the conveyor system, causing delays in our production schedule. The unit is used to transport raw materials and finished goods within the facility, but currently its only capable of moving a small portion of material due to frequent malfunctions. We estimate that repairs will cost between $5,000 and $10,000, considering the age and complexity of the system. Given our budget constraints and the critical need for consistent production flow, we are seeking options for either repairing the existing conveyor system or exploring potential replacement solutions if a more permanent fix is not feasible.:— Purchase or Repair:

➡️ Reply Xljet Board

📝 Rob Albritton said:

I need a rough quote for repair/cal of a 25— Purchase or Repair:

➡️ Reply Xitron Technologies

📝 John Miks said:

Hello, I have three units that need to be repaired. All appear to be out of cal by at least 50% and possibly have only one channel working. I need these for 3Ø testing.Please email or call me.Thank you for your time. John MiksArens Controls Company, LLC3602 North Kennicott Ave.Arlington Heights, IL 60004Direct: 847-704-1922Cell: 224-772-9388Fax: 847-844-4790Email: jmiks@arenscontrols.com— Purchase or Repair:

➡️ Reply Xitron Technologies

📝 mehmet bayrak said:

The Xynetics Inc 100863B1 board is currently not functioning properly. The maintenance team has requested assistance in resolving the issue.— Purchase or Repair:

➡️ Reply Xynetics Inc

📝 Brent said:

I have a Xynetics Inc. 103804 board that is not functioning properly. When I power it on, there are no LEDs lit up, and the unit does not seem to boot up or respond to any inputs. I have tried different power sources and verified all connections, but the issue persists. Based on my initial troubleshooting, it appears that the board may need to be repaired or replaced. I am unsure of the exact repair cost, but I estimate that the replacement cost for a new Xynetics Inc. 103804 board is around $200.— Purchase or Repair:

➡️ Reply Xynetics Inc

📝 Ranieri said:

Xynetics Inc 103804D experiencing frequent power outages disrupting production line. Urgent repair needed for XY amplifier system to resume operations swiftly.— Purchase or Repair:

➡️ Reply Xynetics Inc

📝 queiroz said:

The Xantrex XFR100-28 is a DC Power Supply with an output range of 0-100VDC and 0-28ADC. The unit isnt working and assistance is needed from the maintenance team.— Purchase or Repair:

➡️ Reply Xantrex

📝 aguinaga said:

Im currently experiencing some issues with the Xynetics Inc 103804 machine. It seems that the board might be causing the problem, as something has stopped working. Im unsure of the exact details, but I wanted to bring this to your attention.— Purchase or Repair:

➡️ Reply Xynetics Inc

📝 G M Bajwa said:

Hello, I need repair assistance for my Xycom 109038-002 Interface Board. It is no longer communicating with the industrial unit as needed. Can someone experienced help with this repair? Thank you.

➡️ Reply Xycom

📝 Alan Howard said:

Hello, I hope this message finds you well. We are inquiring about the Xynetics Inc 103804 amplifier. Could you please confirm if it is still supported or if parts are available for replacement or repair? Thank you.— Purchase or Repair:

➡️ Reply Xynetics Inc