Z Corporation specializes in producing high-performance industrial robots and automation solutions for manufacturing plants. Their innovative robotic technology is known for its precision, efficiency, and reliability in various industrial applications. [AI]
We repair a wide range of Z Equipment.
Ask questions, or 1-336-969-0110 for faster service.
Use the search bar above to find specific manufacturers.
The Z World Engineering sbc270a2 is a single-board computer designed for industrial applications. It features a high-performance ARM Cortex-A9 processor, onboard memory, various I/O interfaces (such as Ethernet, USB, serial ports), and support for embedded Linux operating systems. Typical failures of the sbc270a2 include power supply issues, memory errors, and communication interface failures. Regular maintenance and proper handling are essential to ensure the longevity and reliability of this device in industrial settings.
The Z World Engineering s1044 is a compact and versatile programmable logic controller (PLC) designed for industrial automation applications. It features a powerful 32-bit ARM Cortex-M4 processor, 14 digital inputs, 10 digital outputs, and 4 analog inputs. Typical failures of the Z World Engineering s1044 include power supply issues, communication failures, and damage to the digital or analog I/O modules due to electrical overloads or shorts. Additionally, software and firmware corruption can occur, leading to unexpected behavior or system crashes. Regular maintenance and proper electrical protection measures can help mitigate these issues.
Was wondering if you have the setup manual for this older model number 45 interconnect ?β Purchase or Repair:β‘οΈ Reply Zetron
I am locking to find out any supplyer where to buy one power supply AT for PC Manufactured by ZECK Model.ZKS-9101β Purchase or Repair:β‘οΈ Reply Zeck
Machine Zetron 18+ 901-9287 on line 4 is consistently jamming, causing frequent production delays. Need immediate repairs to prevent further disruptions to our production schedule. ACTION NEEDED ASAP.β Purchase or Repair:β‘οΈ Reply Zetron
Zetron 18+ 901-9287 issue Production line halted, system showing error code E3. Urgent repair needed to resume operations immediately.β Purchase or Repair:β‘οΈ Reply Zetron
The Zetron 18+ 901-9287 is experiencing constant screen freezing, hindering production line operations. Urgent repair needed to prevent further delays.β Purchase or Repair:β‘οΈ Reply Zetron
The Zetron 18+ 901-9287 system is experiencing severe line disruptions, resulting in unacceptable downtimes. Urgent action is needed to restore functionality and production efficiency as soon as possible.β Purchase or Repair:β‘οΈ Reply Zetron
The Zetron 18+ 901-9287 system is experiencing repeated connection failures, causing severe delays in production. Immediate repair is crucial to minimize disruptions and maintain efficiency on the line. Please prioritize this issue to ensure a swift resolution.β Purchase or Repair:β‘οΈ Reply Zetron
The Zetron 18+ 901-9287 is experiencing a critical issue where calls are not being forwarded to the designated lines as programmed. This is severely impacting our production line efficiency. Urgent repair service is required to resolve this issue immediately.β Purchase or Repair:β‘οΈ Reply Zetron
dear sir. could you be so kind to send me zetron model35 manual.thank youβ Purchase or Repair:β‘οΈ Reply Zetron Inc
The Zetron 18+ 901-9287 is currently experiencing frequent power outages, disrupting the production line and causing delays. Urgent repair service is needed to address this issueβ Purchase or Repair:β‘οΈ Reply Zetron
The Zetron 18+ 901-9287 line is currently experiencing a critical failure, causing a complete halt in production processes. Urgent repair and maintenance are required to immediately resolve the issue to minimize downtime and losses. Please respondβ Purchase or Repair:β‘οΈ Reply Zetron
Please provide information about the location or company where I can inquire about the Zetron 18+ 901-9287 unit for support and parts availability. β Purchase or Repair:β‘οΈ Reply Zetron
Hello, Im interested in purchasing a Zetron 18+ model 901-9287. Could you please provide information on pricing and availability? Im looking to source this unitβ Purchase or Repair:β‘οΈ Reply Zetron
The Zetron 18+ 901-9287 unit is not working. β Purchase or Repair:β‘οΈ Reply Zetron
The Zareba 01667-92 Storm Guard unit is not powering on after a recent thunderstorm. Need urgent assistance with getting it back up and running.β Purchase or Repair:β‘οΈ Reply Zareba
Dear Sir,We need Power Supply Zeck for our buy.Model: ZKS - 520T .Input: 115/230 Volt, 4A/3A, 60/50 Hz.Qty : 1 Unit.Would you please quote to us with your best price.We are waiting your reply soon to PT. Guna Sejahtera Mandiri - Kelapa Gading (Indonesia), by fax no: 62-21-4506493.Regards,Hery Mulia / Purchasing Manager.Mobile Phone: 62 816772057.β Purchase or Repair:β‘οΈ Reply Zeck
Dear Technical Manager, I introduce myself as the managing director of Fanavarane Partow Danesh (FPD) Co. which is an Iranian engineering company with various fields of activity. Though its a young company but honored to have a seasoned technical team with engineers who have many years of experience in their career. Our main field of activity is repair, overhaul, maintenance and providing electrical systems as UPS, rectifier, inverter, frequency converter etc. Recently weve been contacted by an Iranian glass company which uses Italcarrelli machines and the machines are equipped with Zapi drivers in turn. Italcarrelli machine type is TPEN and Zapi type is Dual-SEM3. As were reported, the MTBF of Zapi drivers is very short. In some cases their life span is 1 month or even shorter! At the moment we arent seeking the reason of their failure but weve been asked to repair them. The system given to us has the following sticker: F78008 β CHOP .Dual-SEM3 00/700 MAT: 05 45 300972131 At first step we checked the power boards and found them healthy, then changed some of the ICs of the controller board. The customer has an instrument that connects to the system and sets the parameters. When the customer engineer tried to connect to the system, that instrument showed no connection and the engineer told that its micro controller (SAF-C517A-LN) has been failed, so he used the control board of another system which its microcontroller was SMD type. Unfortunately after connecting battery to the system and starting the machine, the Mosfets of one of the power boards exploded. We think the problem related to the control board so we switched to the first control board. What we did next was repairing the power boards completely and got a SAF-C517A-LN from the customer which theyd bought some for repair purpose from Italy. We Installed it on the board and substituted almost all ICs though there was no sign of burn on the control board. We also checked the diodes, capacitors and resistors and all were ok. The ICs which remained intact were U15(MM74HC244N), U16(MM74HC373N), U17(MX27C512), U10(93C46W), U6(ST62T25C6), U5(UC2843), U4(MM74HC14N) and U1(CNY17-3), because from our point of view they were all ok. Last week we went to the customer factory and loaded the system on the Italcarrelli machine, connected the battery and started the machine. The wheels started running but after some seconds stopped working. The instrument which set parameters was connected to the system and it gave the alarm R V FIELD NOT OK. Then we tried back motion, the wheels rolled backward but again after some seconds stopped again. What I should note is that as soon as the system was energized its LED started blinking 7 times then after a short stop the period repeated again. What we did was substituting U17(MX27C512) and U6(ST62T25C6) with the ICs of another board and started the system. This time the wheels didnt move and we faced a new alarm CHOPPER NOT CONFIG, so we removed the 2 ICs and installed the origin ICs. Its strange to say that the status didnt change, that is, the wheels didnt move and the alarm was again CHOPPER NOT CONFIG. Of course we were lucky that during this series of tests the power boards faced no damage. Now we hope to get a useful solution from you to be able to remove the problem. We appreciate your reply in advance. Best Regards Abbas GhoreishiManaging DirectorFanavarane Partow Danesh Co.Suite A1, No:1140, Satarkhan St.,Tehran, IranPhone: +9821 44 268 690Fax: +9821 44 260 580Email: Ghoreishi@fpd-eng.irβ Purchase or Repair:β‘οΈ Reply Zapi Inc
Dear Sir, I would like to ask for a quotation for our electronic monitor use by our SK19 air compressor. Thanks, N. Lumain GMC Electrical Maintenance 3408888β Purchase or Repair:β‘οΈ Reply Zander Aachen
Please quote for accessory gear coupling G.E.art no: 302A7696P001β Purchase or Repair:β‘οΈ Reply Zurn Industries
Dear Sirs,One of our customers wants to buy a a sets of complete uster lab for used in Spinning mills.They prefered uster 4/ 5.Kindly offer us.Bes regards,Monzur Raihanβ Purchase or Repair:β‘οΈ Reply Zellweger Uster Technologies
I have a Zellweger Uster item AND I would like a repair quote. The label information is as follows.TYPE: MS90-BAS-TEXMAT NO.: 266161-00000 YEAR: 2002MANUF. NO.: 16045.02.107.0003FELDBUS=TEXBUS17-38V=β Purchase or Repair:β‘οΈ Reply Zellweger Uster Technologies
Dear Sirs, We are seriously finding following machines for our customers. Complete Uster Lab: complete with uster 3/4/5Kindly offer your machines to us. this is very urgent. Best regards, Monzur Raihan Machine Tech International31. Banga Bandhu Avenue, Zirat Chamber, 3rd. floor, Dhaka-1000Phone: 880 2 7160806, 01199870923, Fax: 880 2 7160806,Email: rudra@intechworld.netβ Purchase or Repair:β‘οΈ Reply Zellweger Uster Technologies
Hello, I am interested in purchasing the Z-Axis V21404023 43040-002 unit. Can you please provide me with information on pricing and availability? I am trying to source one quickly. Thank you. β Purchase or Repair:β‘οΈ Reply Z-Axis
Hello, Im interested in acquiring a Z-Axis V21404023 43040-002 unit. My team suggested I inquire here for pricing and availability. Could you please let me know if this model is available and provide pricing information? I am hoping to source one quickly. Thank you! β Purchase or Repair:β‘οΈ Reply Z-Axis
Hello, I am following up on the previous message regarding the Z-Axis V21404023 43040-002 unit. It is still down and I need someone to address this issue immediately. Please respond β Purchase or Repair:β‘οΈ Reply Z-Axis
The Z-Axis V21404023 43040-002 unit stopped working mid-shift. Please check and troubleshoot the issue tomorrow. β Purchase or Repair:β‘οΈ Reply Z-Axis
Hi, the Z-Axis V21404023 43040-002 is not moving, appears to be stuck in position. No error code displayed. Please advise on next steps for troubleshooting and repair. β Purchase or Repair:β‘οΈ Reply Z-Axis
Hello, I need repair info for the Z-Axis V21404023 43040-002. Something stopped working and we need a replacement. Can you provide repair details β Purchase or Repair:β‘οΈ Reply Z-Axis
Im experiencing some issues with the Z-Axis V21404023 43040-002. It seems like something has stopped working, but Im not sure what exactly. Could you please provide some guidance or assistance? Thank you. β Purchase or Repair:β‘οΈ Reply Z-Axis
The Z-Axis V21404023 43040-002 is down due to a drive or board failure. Need to troubleshoot and repair ASAP. β Purchase or Repair:β‘οΈ Reply Z-Axis
Seeking repair for Z-Axis V21404023 43040-002 industrial unit. Currently not functioning, need assistance β Purchase or Repair:β‘οΈ Reply Z-Axis
The Z-Axis V21404023 43040-002 unit is displaying unusual behavior in the warehouse. It is not functioning as expected, but without a description of its normal operation, further details are unknown. β Purchase or Repair:β‘οΈ Reply Z-Axis
Z-Axis V21404023 43040-002 not responding, not moving up or down. β Purchase or Repair:β‘οΈ Reply Z-Axis
Please provide assistance in locating replacement parts or repair options for Z-Axis V21404023 43040-002 unit. Thank you. β Purchase or Repair:β‘οΈ Reply Z-Axis
The Z-Axis V21404023 43040-002 unit is exhibiting unusual behavior, different from its normal functionality. The specific issue is not described, but it is acting erratically or unexpectedly. β Purchase or Repair:β‘οΈ Reply Z-Axis
Please confirm if the Z-Axis V21404023 43040-002 unit is still supported or if replacement parts are available for it. Its an older unit, and were unsure of the manufacturer. Thank you. β Purchase or Repair:β‘οΈ Reply Z-Axis
Devo fare delle tarature su un programmatore CTR100 di un asimca 3007. Vorrei informazioni o documentazione per sincronizzare la partenza incollatore.β Purchase or Repair:β‘οΈ Reply Zema Elettronica
Dear Sirsplease kindly inform us whether you can supply us with:a control panel for a Simca machine which was principally equipped with a Zema Elettronica panel.A swift response would be very much appreciated.Thank youMaria Janieroβ Purchase or Repair:β‘οΈ Reply Zema Elettronica
my unit probably needs a sound head and cable, is that something you can help me with?β Purchase or Repair:β‘οΈ Reply Zimmer Electronic Systems Zes
I need a new sound head and cord, is that something you can supply?β Purchase or Repair:β‘οΈ Reply Zimmer Electronic Systems Zes
the cable is obviously needs to be repaired/replaced, the head is pitted.I will mail it to you via US Mail Serviceβ Purchase or Repair:β‘οΈ Reply Zimmer Electronic Systems Zes
I emailed you several weeks ago, talked to your office, then mailed my zimmer ultrasound head to you, August 24, 2011.Ive not heard anything from you, whats going on?951.787.9810β Purchase or Repair:β‘οΈ Reply Zimmer Electronic Systems Zes
Do you have a Zebtronics SE 11-04-60 available for sale or repair? Our unit has gone down, and we need to keep production running.β‘οΈ Reply Zebtronics
Zerotakt 57448-255 not powering on, no display. Need immediate repair assistance.β‘οΈ Reply Zerotakt
Hello!We have a problem with the card serial number z 92 controlloMATR ΒΉ 109048 003-C3-20REV F LCEach time you start the engine start is delayed for 3 minutesPlease help solve this problemTo speak English poorlyWith respect the chief engineerβ Purchase or Repair:β‘οΈ Reply Zema Elettronica
Please quote your best price and delivery for the Coupling Part No 302A7696P001β Purchase or Repair:β‘οΈ Reply Zurn Industries
Urgent Repair Needed for BL1700 Circuit BoardHi there, the BL1700 Circuit Board in our equipment seems to have failed. We are experiencing constant error code E27 and the machine is unable to power on properly. Please provideβ Purchase or Repair:β‘οΈ Reply Zworld Inc
Issue Zellweger bp265738-01000a experiencing erratic behavior on the production line, leading to work stoppage and delays. Urgent attention required to diagnose and rectify the problem to resume normal operations swiftly.β‘οΈ Reply Zellweger
We experienced unexpected downtime due to a malfunction in the Zetron 18+ 901-9287 circuit board today at 330 pm. Could you please investigate and provide immediate feedback before the next shift starts? Your β Purchase or Repair:β‘οΈ Reply Zetron
Circuit Board issue on Zetron 18+ 901-9287 causing production downtime. β Purchase or Repair:β‘οΈ Reply Zetron
Machine is displaying error code E34 signaling a circuit board issue. β Purchase or Repair:β‘οΈ Reply Zetron
The Zetron 18+ 901-9287 circuit board is not working properly. β Purchase or Repair:β‘οΈ Reply Zetron
The Zetron 18+ unit with serial number 901-9287 is not working. Issue related to the circuit board. β Purchase or Repair:β‘οΈ Reply Zetron
Hi there, I need repair info for Zetron 18+ 901-9287 circuit board. Not available in purchasing database. Quick response needed. Thank you! β Purchase or Repair:β‘οΈ Reply Zetron
Our Zetron 18+ 901-9287 experienced downtime due to a circuit board issue earlier today. This occurred around 1030 AM. Can you investigate and provide feedback before the next shift starts? Thank you! β Purchase or Repair:β‘οΈ Reply Zetron
Could you please confirm if the Zetron 18+ 901-9287 is still supported or if replacement parts are available for this unit? β Purchase or Repair:β‘οΈ Reply Zetron
The Zetron 18+ 901-9287 unit in the warehouse is displaying abnormal behavior. It is not functioning as expected - acting strangely, but the specific issue is unknown. β Purchase or Repair:β‘οΈ Reply Zetron
Hello, Im reaching out on behalf of a client who needs assistance with a Zetron 18+ (part number 901-9287), specifically regarding the circuit board. Can you provide information on repair options and estimated costs? Thank you. β Purchase or Repair:β‘οΈ Reply Zetron
Could you please confirm if the Zetron 18+ 901-9287 is still supported, and if there are any replacement parts available for its circuit board? β Purchase or Repair:β‘οΈ Reply Zetron
Hello, do you have a Zelko Screen Industries Inc. TP 12 04101-01 Touch Keypad Panel available for repair or purchase? Our unit is down, and we need to keep production running. Thank you. β Purchase or Repair:β‘οΈ Reply Zelko Screen Industries Inc.
Hello, do you have a Zelko Screen Industries Inc. TP 12 04101-01 Touch Keypad Panel available for sale or repair? Our unit is currently down and we need to keep production running. Thank you. β Purchase or Repair:β‘οΈ Reply Zelko Screen Industries Inc.
I have a Zareba 8900-B Electric Fence Controller that is no longer working properly. The unit is not supplying power to the electric fence, and there is no indication of any power output when I test it. I have checked the connections and the fence itself, both of which seem fine. I suspect there may be an internal issue with the controller that needs repair. I would like information on repair services for the Zareba 8900-B Electric Fence Controller, including an estimate of the replacement cost if repairs are not feasible. Thank you for your assistance in resolving this issueβ Purchase or Repair:β‘οΈ Reply Zareba
Egregi Signori,Ho ricevuto una linea dallItalia per la produzione di imballaggi di cartone.Su questa linea, il convertitore trifase serie Z 92, che aziona un motore a corrente continua con le seguenti caratteristiche: P = 31kW; r.p.m. 25501 / min; Ua = 440V; Uf = 190 V; Ia = 78A.La linea del venditore non mi ha spedito la documentazione per linstallazione di Z92.Per favore, se possibile, inviami la documentazione e lo schema di collegamento della serie trifase Convertitore Z92Con grande rispetto,Radovan Basovi?β Purchase or Repair:β‘οΈ Reply Zema Elettronica
Hello, Im interested in purchasing a Z-World Inc BL1700 Circuit Board. I am not completely sure if this is the correct model, but my team suggested I inquire here. Could you please provide information about pricing and availability? I am looking to source one quickly. Thank you.β Purchase or Repair:β‘οΈ Reply Z-World Inc
The Zhijie Electronic PQ32/30-40305A board is displaying error code E23 and not powering on. Need urgent assistance to get the equipment back up and running.β Purchase or Repair:β‘οΈ Reply Zhijie Electronic
The power supply unit (ZAP EZP-06-05, 24V 4A) is failing, causing a shutdown of the production line. Immediate repair service is required to resume operationsβ Purchase or Repair:β‘οΈ Reply ZAP
The ZAP EZP-07-05 power supply unit in the warehouse is malfunctioning - it is displaying unusual behavior and not functioning as expected.β Purchase or Repair:β‘οΈ Reply ZAP
Hey there! The Zener MSC-R24 unit went down mid-shift. Need someone to check it out and troubleshoot. Thanks!β‘οΈ Reply Zener
Request Service for Zellweger UsterModel/Part : Zellweger Uster 811V5β Purchase or Repair:β‘οΈ Reply Zellweger Uster
Request Service for Zellweger UsterModel/Part : Zellweger Uster 811V5β Purchase or Repair:β‘οΈ Reply Zellweger Uster
Request Service for Zellweger Uster 811v5Model/Part : Zellweger Uster 811v5β Purchase or Repair:β‘οΈ Reply Zellweger Uster 811v5
Just checking to see if you are still repairing Zetron Model 18+ RTUs?ThanksEdβ Purchase or Repair:β‘οΈ Reply Zetron
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
π Rush repair shipments only β no walk-ins.
Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
π¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.