Welcome to Advance

We repair a wide range of Advance Equipment.

Ask questions, or 1-336-969-0110 for faster service.

Use the search bar above to find specific manufacturers.

• 40+ years of experience repairing Industrial & Commercial units
• Certified Senior Industrial Electronics Technician
• Ability to do Reverse Engineering
• No job to big or small
• Fast turn around time on most units
• Quality of work comes before profit!
• Old Fashion Customer Service is always the right policy
• Extended warranty
• Fair Estimates
• Low Prices

🛠️ Common AI Repair Summaries 🏭

Comments for Advance

📝 DeeAnne said:

Hi,I am in desparate need of a wiring diagram for an Advance industries 116220D board for a Mckinney Electronics operator. We need to add a reflective detector and the board we have does not have a labelled terminal block. We would appreciate any information you might have.Thanks,DeeAnne

➡️ Reply Advance Industries

📝 A & H TECHNICAL SERVICES N.V. said:

Dear Sir/Madam,I am looking for a part that you have in store. That is part model no. 116220 D. I would like to know how much this part will cost me.I am looking forward for a reply.yours sincerly, Nando Semeleer.

➡️ Reply Advance Industries

📝 Leonce Collins said:

Need logic board 116220DModel 107243-0002Do you have that availableLeonce Collins504-722-4729

➡️ Reply Advance Industries

📝 Donald Marcotte said:

I am looking for a circuit board Advanced Industries model No. 116220 D P/N 107243-0002 LOGIC TIMER

➡️ Reply Advance Industries

📝 Robert Ingram said:

Based on the given description of the Advance Drive Technology TM5-015i-1N 49866-109 IFT Drive Cube, the reported issue is likely related to the drive functionality. Symptoms may include abnormal noises during operation, failure to start or stop smoothly, erratic movements, or error messages indicating drive malfunction. Further diagnosis and troubleshooting are recommended to identify and address the specific issue.

➡️ Reply Advance Drive Technology

📝 Peter Lutes said:

looking for a service Manual for specs have a parts books looking for to service and repairThank-you Peter Lutes

➡️ Reply Advance Farnel Gould

📝 Jeff Fink said:

Do you have any history in repairing AEI Pinnacle 20kw dc supplies?If we wanted to replace a board in this supply, do you have other supplies to cannibalize or access to a beacon line to get parts?Thanks,jeff Fink

➡️ Reply Advanced Energy

📝 Bret Moore Sonoran Industrial air power said:

Please contact me asap about my board repair, I thank it was shiped on friday, thats what i need to know. Thank you Bret Moore

➡️ Reply Advance Industries

📝 JIM said:

COULD YOU POINT ME IN THE RIGHT DIRECTION FOR A MANUAL FOR A 116220D? I;M TRYING TO DISABLE THE TIMER OR ADD PHOTO EYES.

➡️ Reply Advance Industries

📝 Russell Diaz said:

I work for Overhead Door Company of Las Cruces and we have the logic timer board in stock, but nobody hear seems to know what it goes into. We assume its for a gate operator but we dont lnow which model I believe it maybe for several different models.Can you help?Thanks

➡️ Reply Advance Industries

📝 michael said:

I HAVE A KEW 16 40 HA, AND IM HAVING PROBLEMS TRYING TO FIX IT!IT WONT RUN AT ALL,THOUGHT IT MIGHT BE THE COIL , CHECKED THE WIERING! AND STILL NOTHING? HELPMANY THANKS MICHAEL

➡️ Reply Advance Industries

📝 Paul Leland said:

We have the circuit board listed above in our gate operator and the manual timing wheel on the board seems to be eradic as I put it to min. and the gate stays open approx 9 minutes. Before I played with it today, the gate would stay all the way open for 1 1/2 seconds before closing.Any suggestions?

➡️ Reply Advance Industries

📝 danny morales said:

I have this board in my gate opener and need to find owner manual or just need to find out how to hook up the coaxial receiver to this board 760 252 9000

➡️ Reply Advance Industries

📝 mark casey said:

I have manual for this oard if you still need it

➡️ Reply Advance Industries

📝 wildbill said:

The logic timer board was used in the Crusader C-300 and C-350 slide gate operators by McKinney Electronics/Overhead Door. I would be interested in purchasing this board if it is still available and known to be functional. Mine has the same issue as described in the iernc post by David Prevo in Oct. 2012 The time adjust control is not functioning and the gate will either close within one or two seconds, or, if slightly moved for a longer delay, will stay open and not close at all.

➡️ Reply Advance Industries

📝 Fredrick Goll said:

I have two remotes and a receiver that I believe were made by Advance Industries, Shelbyville, Indiana. One of the remotes works only intermitently. I would like to repair or replace the remote or replace two remotes and the receiver unit on the Overhead Garage Door Opener. The opener works fine.I you are the company that can help the garage door opener is Mod R 802, NEC Class 2 Circuit, 25 Volt Max, 6 amp, 1/4 HP. Freq is 380-BBB, FCC ID BSH8YN-206, MFG 90226.A response by email would be helpful.Thanks

➡️ Reply Advance Industries

📝 Williams said:

I have been searching everywhere for an opener to my garage door.It is an older model manufactured by Overhead Door with a transformer attached manufactured by Advance Industries class 2 year 92 model.If you have a solution please email me or call me at (903)819-5907.

➡️ Reply Advance Industries

📝 david ambler said:

Remote shows FCC# only the garage door opener is overhead door 450A I would like to find another spare remote.It is medium brown in color with a brown button and an ivory color button .The remote operates 2 doors and has 2 code selection modules one for each door.

➡️ Reply Advance Industries

📝 troy gowan said:

I have a overhead garage doors opener. model 100. I am looking for a replacment remot and reciverreciver number is 107224-0014

➡️ Reply Advance Industries

📝 John D said:

I have an Overhead Garage Door Opener Model 100. I am looking for a replacement receiver P/N 107224-0014.

➡️ Reply Advance Industries

📝 Dennis Sytsma said:

I need repair or replacement information regarding COPS board for the R-200 PN # 108939-0001 and other part numbers. Made by McKinney electronics for residential slide gate operator. Orginial part number was 940036-2 that came in a box marked overhead door company with no address. I purchased this system new in 1985 and had no trouble getting boards in miami florida in past years, but find them no longer availabe in my area.

➡️ Reply Advance Industries

📝 Conrad said:

Remote control: Crusader Solid State Model 200SS/202SS

➡️ Reply Advance Industries

📝 Joseph Snow said:

Need a manual for a 24 volt AC power door opener, in order to hook it up

➡️ Reply Advance Industries

📝 Jerry Fields said:

I need to purchase 2 ea. Advance Industries Garage Door OpenersFCC ID: BSH8YN213

➡️ Reply Advance Industries

📝 chris corey said:

im looking to replace a bsh8yn229 remote

➡️ Reply Advance Industries

📝 Larry Freeze said:

Would like information on the purchase of two remote units. The main door remote unit has lable #107224-0002. The other unit was run over by the car and is unavilable. Please send info on how to purchase replacable items . Thank you Larry Freeze 302 Guava Pl Brea, Ca. 92821f

➡️ Reply Advance Industries

📝 john.gilmore said:

I purchased a house with a garage door opener made by advance industries . The remote will only work if you have direct line of site with opener. I have put in fresh batteries. It appears to be very old.Any suggestions would be appreciated.Thanks

➡️ Reply Advance Industries

📝 walter zambrana said:

I would like to replace the 2 remotes controls that I have. the following information is: FCC ID: BSH8YN106546. FREQ. 360- MFG91 168.Your response by E-mail will be really appreciate.

➡️ Reply Advance Industries

📝 dennis yost said:

i need to replace 1 black box for a horton opener brand name - Horton easy access number on the board inside box - 107846-0001 Freq - 360 Mfg - 92 48 Fcc Id: BSH8YN107846Unable to find item on Google or EbayIs it still available? thanks dennis

➡️ Reply Advance Industries

📝 Mitch said:

Contact me if you still need themMiMarch 31 2015

➡️ Reply Advance Industries

📝 Gordon Truex said:

I have a touch ngo remote garage door opener (390-19 mhz) for my overhead door garage opener and it works fine. I would love to get another one. I believe this has a date of 1985 on it and dont know if these are still possible to get. Any help? Thank yo

➡️ Reply Advance Industries

📝 Gordon Truex said:

I am looking for another or a replacement for the Touch n go (390-19mhz) remote that I now have. As far as I can tell it was from 1985 and is analog. It is for my Overhead Door garage door opener from the early 1970s. I would love to get another one for my wifes car. Thank you

➡️ Reply Advance Industries

📝 Ann Ratay said:

We have 2 overhead garage doors........... but no remotes. They are both Model 55A Garage Door Opener System by The Overhead Door Co. They were installed about 1985. Wondering if there are replacement remotes we can purchase anywhere.Would appreciate any information or help you could provide concerning this matter. Thank you for your time and assistance.Ann

➡️ Reply Advance Industries

📝 monty clifcorn said:

The tag over three box relays says MFD. ADVANCE INDUSTRIES, APPLETON, WIS. with the controller model no. tagged on the circuit board. I may need a new board or repair to the board. One of the relays continues a slow click as long as the opener is plugged in to power. Please advise. Thanks.

➡️ Reply Advance Industries

📝 Bonnie Briggs said:

I have 2 remote garage door openers made by Advance Industries, Shelbyville, IN. One works very well. The other was kept in storage and the battery inside leaked and corroded the battery connector. These use a 9-volt battery. The FCC ID number is BSH8YN106546 and the MFG. number is 081587. The Freq. number is 380-BBD. I need to have this garage door opener either repaired or replaced. Please advise.Thank you so much

➡️ Reply Advance Industries

📝 STIGLIC said:

Urgent Repair Needed for Drive UnitHi ,Im reaching out on behalf of someone in the shop regarding our Advanced Drive Technology T50015i1PPR 300503-103 unit. They mentioned that its not working and requires immediate attention.Thank you for looking into this

➡️ Reply Advanced Drive Technology

📝 Mamoru Ozawa said:

Hello Industrial Electronic RepairI have been finding a parts of contactor of PRODUCTS UNLIMITED Corp 3100-30C10377JR, which is in Advanced Eergy DC power supply.I would appreciate it if you would give me an infrmation how to get it.Please send me by E-mailBest regardsMamoru

➡️ Reply Advanced Energy

📝 scott wilson/doortech said:

do you have the light board that plugs into the 116220d timer board

➡️ Reply Advance Industries

📝 Rohit said:

Hello,I am in the parts department and a fellow employees Advanced Energy Ind Inc 27-034212-00 has stopped working. We need a replacement part, but I cant find one. Could you please provide repair information or suggest where we can find a replacement part?Thank you.

➡️ Reply Advanced

📝 danny morales said:

I have this board in my gate opener and trying to find out how to hook up a coaxial receiver and a owners manual thank you

➡️ Reply Advance Industries

📝 Gordon Truex said:

I forgot to mention the model of the door opener is R80-az It is 115volts and 60amps 1/3 hp. There is a separate antenna mod 702 ser#751015 code 390-19 Thank you

➡️ Reply Advance Industries

📝 Gordon Truex said:

Can you tell me if it is possible to get a replacement remote for a Touch n Go remote I purchaced in 1985. It is coded 390-19. there is an antenna model 702, ser#751015 if that helps. also the door opener is a model R80-az. Thank you

➡️ Reply Advance Industries

📝 Marlon Premo said:

Need assistance with an Advance Drive Technology TM5-015i-1P 48691-109 IFT Drive Cube unit that is not powering on. Looking for repair service ASAP.

➡️ Reply Advance Drive Technology