Procond Service & Repair Forum
Procond MC-70 124438 drive is not engaging.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "Procond"
- Procond → Procond MC-70 124438 ↗
- Procond → Procond EWM 1000 PLUS W1A0DDBF ↗
- Procond Elettronica → Procond Elettronica MC-70 124438 ↗
- Procond Elettronica → Procond Elettronica MC-70 motor controller ↗
- Procond → Procond MC-70 ↗
If you need your Procond unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 613 Comments
Hello, do you have a replacement Procond MC-70 124438 drive available for sale or repair? The unit has gone down, and we need to keep production running. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The treadmill board on Procond Elettronica MC-70 124438 is malfunctioning, causing a halt in production. Urgent repairs are needed to resume operations immediately.
—> Purchase or Repair:
—> Purchase or Repair:
The red light is all the time flashing, when the the compressor first comes on it stays on for good 5-10 min and goes to standby and then when it comes back on after a while it stays on for round about 3 min and there about . The supper freeze dose not come on as well, so i will be very great full i…Purchase or Repair: 
...
Show More
Show More
I am an electronics tech and I am attempting to repair this MC-70 controller board. Do you have schematics on .pdf you could email me? I would sure appreciate it.Also I noticed you are hiring. Perhaps I could do some work for you on the West coast. I tried calling the number but I only got a busy to…Purchase or Repair: 
...
Show More
Show More
the Procond Elettronica MC-70 124438 treadmill board on unit X is malfunctioning. Needs attention ASAP. Please check it out first thing in the morning. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
I have a sears treadmill with mc-70 motor controller #124438 that has shorted diodes. I would like to have a price on repairs or replacement.Thanks Charles
—> Purchase or Repair:
—> Purchase or Repair:
I am reaching out on behalf of a client who needs assistance with a Procond Elettronica 453160320 141914 treadmill controller. Can you please provide information about potential repairs or replacements for this part? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I'm following up again regarding my Procond Elettronica MC-70 124438 treadmill controller issue. It's still not working. I need assistance with this as soon as possible.
—> Purchase or Repair:
—> Purchase or Repair:
Ronco Scrivia, 06/09/2011Vi sarei grato se poteste inviarmi preventivo di spesa ed eventuale indirizzo di spedizione per la riparazione della scheda in oggetto.Ringrazio anticipatamente.Gian Piero Traverso
—> Purchase or Repair:
—> Purchase or Repair:
Dear sirPlease provide me the electrical diagrammatic of wohlenberg 115 1984 Thanks
—> Purchase or Repair:
—> Purchase or Repair:
What are the type and specs for the Diodes on this Controller board? They are located in the DZ1 and DZ4 positions. Also, is the resistor that is located ajacent to these Diodes the best size? if not what do you recommend?
—> Purchase or Repair:
—> Purchase or Repair:
The treadmill board on Procond Elettronica MC-70 124438 is malfunctioning, affecting the production line. Please address this issue urgently to resume operations
—> Purchase or Repair:
—> Purchase or Repair:
Dear Sir,the Procond Elettronica 356084601 circuit of my Ariston LSI 41 dishwasher is broken.Is it possible to buy a new one?How much would it cost?Thank you Barbara AnselmiSIENA-ITALY
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, leading to a disruption in the production line. We need immediate repair service to address this issue and resume operations swiftly.
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is displaying error code E2, indicating a motor speed sensor problem.
—> Purchase or Repair:
—> Purchase or Repair:
HelloIm also would like to test this my module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this module *******Waht is the cost for repair? What is the cost for a new one?GE Procond ElettronicaType P. 451510051 Type E. 12430392/5SW Ver. W2C01250 2…Purchase or Repair: 
...
Show More
Show More
Hello, I have a Procond Elettronica MC-70 124438 treadmill board that needs replacement or repair. It's an older unit, and we're unsure of the manufacturer. Could you please advise if this model is still supported or if replacement parts are available? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller on unit XYZ malfunctioned mid-shift. Please check and troubleshoot during the day shift.
—> Purchase or Repair:
—> Purchase or Repair:
Is it possible to purchase the control unit for an AEG Oko Lavamat 72630 update:GE Procond Elettronicatype P - 451510051 F:4875Type E - 12430392/5SW Ver - W2C01250 26/00
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board in the warehouse is displaying unusual behavior - it is not functioning as it normally does.
—> Purchase or Repair:
—> Purchase or Repair:
I urgently need assistance with the Procond Elettronica MC-70 124438 treadmill controller. The unit is still down, and we require immediate attention. Please respond
—> Purchase or Repair:
—> Purchase or Repair:
The treadmill board on the Procond Elettronica MC-70 124438 is malfunctioning, disrupting the production line. Urgent repair service is needed to restore operations
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing some issues with the Procond Elettronica MC-70 124438 treadmill board. It seems like something has stopped working, but I'm not exactly sure what the problem is. I would appreciate any assistance or guidance you can provide.
—> Purchase or Repair:
—> Purchase or Repair:
I need to replace (or repair) the electeonic card of my dryer Faure. The Start button donnot work any more.Thanks,Michel Julien
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, disrupting our production line. Urgent repair service needed immediately to resolve the issue and restore normal operations.
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 motor controller is malfunctioning, causing a production line halt. Urgent repair needed to resume operations.
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 is a treadmill controller unit that is not functioning properly.
—> Purchase or Repair:
—> Purchase or Repair:
I\'m dealing with problems in this machine . It is hard to start programs and when it start the machine run for several minutes and is working constantlywhen it has 51 minutes to remaining of the program. I think it is something wrong with Circuit-board Type P 451510069 F371. Please comment if it ri…Purchase or Repair: 
...
Show More
Show More
Do you have a replacement Procond Elettronica MC-70 124438 treadmill controller available for sale or repair? Our unit is down, and we need to keep production running.
—> Purchase or Repair:
—> Purchase or Repair:
The unit Procond mc-70 124438 (treadmill controller) went down during the night shift. Needs follow-up during the day shift.
—> Purchase or Repair:
—> Purchase or Repair:
The treadmill controller (Procond Elettronica MC-70 124438) is malfunctioning, halting production. Urgent repair service required to address the issue
—> Purchase or Repair:
—> Purchase or Repair:
HelloIs it possible to have a schematic or technical datasheet of this moduleProcond Elettronica 3560132009Thanks Martial Brunet
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, affecting production. Urgently need repair service to address the issue to get the line back up and running ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is displaying unusual behavior in the warehouse.
—> Purchase or Repair:
—> Purchase or Repair:
The treadmill controller on the Procond Elettronica MC-70 124438 is malfunctioning, disrupting the production line. Please address this issue urgently to minimize downtime.
—> Purchase or Repair:
—> Purchase or Repair:
I believe there's an issue with the Procond Elettronica 453160320 141914. The machine seems to have stopped working correctly, possibly related to the treadmill controller. I'm not entirely sure, but we may need to have it checked by a technician.
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing some issues with the Procond Elettronica MC-70 124438 treadmill controller. The machine seems to have stopped working correctly, and I'm not entirely sure why. It may require further inspection to determine the exact problem.
—> Purchase or Repair:
—> Purchase or Repair:
There is a critical issue with the Procond MC-70 124438 treadmill controller hampering production. Immediate attention and repair service are needed to restore operations swiftly.
—> Purchase or Repair:
—> Purchase or Repair:
The unit you're referring to is the treadmill controller Procond Elettronica MC-70 124438. The issue you're experiencing with it is erratic behavior.
—> Purchase or Repair:
—> Purchase or Repair:
My Procond Elettronica 356033305 47-90 unit is still down. Please provide an update at your earliest convenience.
—> Purchase or Repair:
—> Purchase or Repair:
I have a faulty control board for EWF 1620 The resistor R82 has burnt out. I wish to replace it but I do not know it\'s value. Please can you send me the value and a schematic please? Thank you for your help.
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 motor controller is malfunctioning, causing a halt in production. Please address and rectify the issue urgently to minimize downtime on the line.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have a Procond Elettronica MC-70 124438 treadmill controller available for sale or repair? Our production is down, and we need to get it up and running as soon as possible.
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller unit is experiencing abnormal behavior - it is not functioning as it normally does.
—> Purchase or Repair:
—> Purchase or Repair:
Dear Sir,Please helpot me hoe i repair this controller , its burnt due to 220V ,or please send me its technical data sheet where i can fix it Thanks
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a disruption in our production line. We need immediate repair service to address this issue
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning - it is not functioning as usual and is showing erratic behavior.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am trying to source one quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: