Procond for Service call 1-336-969-0110 at Industrial Electronics Repair

Procond Service & Repair Forum

The unit Procond mc-70 124438 (treadmill controller) went down during the night shift. Needs follow-up during the day shift.

—> Purchase or Repair:

— Posted by Tiron Mihai-Cristian on 2006-12-26

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "Procond"

Procond → Procond MC-70 124438 ↗
Procond → Procond EWM 1000 PLUS W1A0DDBF ↗
Procond → Procond MC-70 ↗
Procond Elettronica → Procond Elettronica MC-70 motor controller ↗
Procond Elettronica → Procond Elettronica MC-70 124438 ↗

If you need your Procond unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 613 Comments

#Procond Elettronica by Elmer on 2005-12-21 16:47

The Procond Elettronica MC-70 motor controller is malfunctioning, causing a critical stoppage in the production line. The motor is not responding to commands, impacting the entire process. Urgent repair service is required to resolve this issue

—> Purchase or Repair:

#Procond Elettronica by sarwar alam on 2006-06-10 21:11

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, leading to a disruption in the production line. We need immediate repair service to address this issue and resume operations swiftly.

—> Purchase or Repair:

#Procond Elettronica by Dorothy on 2007-05-14 19:19

I have a Procond Elettronica MC-70 124438 treadmill controller that needs repair. The treadmill is not responding when turned on. Looking for a qualified technician to fix it as soon as possible.

—> Purchase or Repair:

#Procond Elettronica by MALIK RIAZ on 2011-05-18 08:18

I HAVE MC-70 MOTOR CONTROLLER CARD, PLEAS I WANT TO KNOW SOME PARTS VALUES OF THESE LOCATION ,R57,DZ1,DZ4 ITS BURNED WITH OVER VOLTS

—> Purchase or Repair:

#Procond Elettronica by patrick on 2012-04-18 17:19

This Procond elettronica is bad because no responces!!!

—> Purchase or Repair:

#Procond Elettronica by VINOD on 2006-12-08 16:16

the Procond Elettronica MC-70 124438 treadmill controller is down. Need someone to check it out first thing in the morning. Thanks!

—> Purchase or Repair:

#Procond Elettronica by fagus on 2007-02-16 14:19

Hello, I have a Procond Elettronica MC-70 124438 treadmill board that needs replacement or repair. It's an older unit, and we're unsure of the manufacturer. Could you please advise if this model is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:

#Procond Elettronica by pasha on 2007-04-24 19:20

Hello, I'm interested in purchasing the Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Legg on 2007-05-25 23:13

I'm reaching out to inquire about the support and availability of replacement parts for the Procond Elettronica MC-70 124438 treadmill controller. It is an older unit, and we are uncertain about the manufacturer. Please advise if this model is still supported or if replacement parts are available. T…Purchase or Repair:

#Procond Elettronica by al mccullough on 2006-06-23 06:34

The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a major disruption in our production line. Immediate repair service is needed to get operations back on track.

—> Purchase or Repair:

#Procond Elettronica by Konstantin on 2007-10-06 17:57

Hi! I have noticed that the Procond Elettronica MC-70 124438 treadmill controller is behaving unusually. It is not working as it normally does and is acting weird. Please have a look into it. Thank you!

—> Purchase or Repair:

#Procond Elettronica by Sergio Dratwa on 2007-11-13 06:23

Elevation motor is working properly, drive motor does not starts.There are 2 diods that are burn: DZ1 and DZ4 (in between the relay and what look like to be 2 ceramic resistors). There is an overheat area on PCB under these diods, but PCB still OK.Would you sell me just the diods?If not, how should …Purchase or Repair:

#Procond Elettronica by Uwe Jungbauer on 2007-05-21 09:30

Dear Sir In our Electrolux dishwasher W60, we have the printed circut, typ: 356083206. My question is, if we can get this part checked in Hungary or in Austria?With regardsUwe Jungbauer

—> Purchase or Repair:

#Procond Elettronica by Manuel on 2009-05-25 17:30

HelloIm also would like to test this my module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this module*******Waht is the cost for repair? What is the cost for a new one?GE Procond ElettronicaType P. 451510050Type E. 12430392/4SW Ver. W2C01202THAN…Purchase or Repair:

#Procond by jackpot18 on 2006-06-20 18:32

The Procond MC-70 124438 treadmill controller is malfunctioning, impacting the production line. Urgent repair service is required to resolve the issue

—> Purchase or Repair:

#Procond Elettronica by Maurice on 2007-06-01 07:50

The Procond Elettronica MC-70 124438 treadmill controller in the warehouse is experiencing unusual behavior - it's not functioning as expected.

—> Purchase or Repair:

#Procond Elettronica by gerardo aldape salas on 2017-06-21 16:29

i need repair a module 170-0518 rev.2 im live in mexico

—> Purchase or Repair:

#Procond Elettronica by Telecasterkds on 2021-11-20 12:32

only a few survived.

—> Purchase or Repair:

#Procond Elettronica by Dejan Pantelić on 2008-04-17 10:33

Dear Sirs,please send your best offer for following items: GE INDUSTRIAL FILTERS: 1. TYPE RANGER 520-280 2 PC 520 V AC, 50-60Hz, 0345, 280A, 40 degrees C, 82480 high leakage current connect protective earth first 2. TYPE RANGER 520-450 1 PC 520 V Ac, 50-60Hz, 0150, 450A, 40 degrees C, 80447 high lea…Purchase or Repair:

#Procond Elettronica by Fred Santizo on 2006-01-29 05:40

Dear Sir/Madam:I need a device with tree switches. It must create the PWM to control the speed of a treadmill motor controller. One of the switch will turn on/off the treadmill the other two will be use to increase/decrease the speed of the motor or the treadmill. I want to eliminate the console of …Purchase or Repair:

#Procond Elettronica by TC on 2013-07-27 13:32

I'm currently experiencing difficulties with the Procond Elettronica 356033305 47-90 machine. It appears to be a circuit board issue, which has caused the machine to stop functioning as expected. I'll do my best to find a solution for this problem.

—> Purchase or Repair:

#Procond Elettronica by Adach on 2007-04-04 18:56

Could you please provide information on the Procond Elettronica MC-70 124438 treadmill controller? We are looking to determine if it is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:

#Procond Elettronica by joel on 2012-02-05 11:13

Bonjour je recherche un condensateur procond electronica zem411 13 22 038 OU S H 0.1µF (X2)+2x 0.015µF (Y) +2.2M om250V~ HPF 25/Q85/21RB 24 565-1Cette piece viens d\'une cuisiniére rosière trio ( plaque four lave vaisselle )merci

—> Purchase or Repair:

#Procond Elettronica by mark on 2007-03-24 03:30

Marco,I had a long conversation with a few people and here is what we have come up with for the MC-70 Board.Now depending on the versionDZ4- is the 24V,50ma,5watt zener ORDZ4A and DZ4B- are 12V,650ma,5watts each in series.DZ1- is 15V, 0.2a,1wattDZ2- is a 3.9V, 20ma, 1/2wattI have replaced them as re…Purchase or Repair:

#Procond Elettronica by Glassuth on 2022-02-27 02:48

At the same time, many antique

—> Purchase or Repair:

#Procond Elettronica by Joann on 2007-01-10 03:11

Can the Procond Elettronica MC-70 124438 treadmill board be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:

#Procond Elettronica by epi solihin on 2007-10-26 04:40

The Procond Elettronica MC-70 124438 is a treadmill controller that is currently not working.

—> Purchase or Repair:

#Procond by McCUISTION on 2006-06-22 10:29

The treadmill board on Procond MC-70 124438 is malfunctioning, causing a halt in production. Urgent repair service is needed to get the production line up and running without further delay.

—> Purchase or Repair:

#Procond Elettronica by alok bikash sadangi on 2006-06-21 14:34

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a production line halt. Immediate repair service needed to resume operations.

—> Purchase or Repair:

#Procond Elettronica by roberto arreola on 2008-03-20 02:51

Iwant to now the price in this part

—> Purchase or Repair:

#Procond by brian waterman on 2006-12-19 15:01

The Procond MC-70 124438 treadmill controller has failed. Urgent action required to locate and replace the faulty drive or board.

—> Purchase or Repair:

#Procond Elettronica by Kosiecki on 2007-10-31 03:37

I'm sorry to hear that your Procond Elettronica MC-70 124438 treadmill controller is not functioning properly. It seems like there is an issue with the machine, but I'm uncertain about the exact problem. I recommend contacting a professional technician to diagnose and fix the problem for you.—> …Purchase or Repair:

#Procond Elettronica by Emanuele Ceccarelli on 2006-11-27 21:20

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a production line halt. We need urgent repair service to resolve this issue immediately.

—> Purchase or Repair:

#Procond Elettronica by roger moutal on 2007-12-10 22:48

Hi,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 451511735 . AND ALSO THE PRICE FOR A TRANSPORTATION TO FRANCE.THANK YOU

—> Purchase or Repair:

#Procond Elettronica by BOULIANNE on 2007-03-14 01:18

The Procond Elettronica MC-70 124438 treadmill controller in the warehouse is exhibiting abnormal behavior - it is not functioning as usual.

—> Purchase or Repair:

#Procond by Ferguson on 2014-03-13 00:00

Procond MC-70 124438 drive issue unit not functioning properly, suspect motor or drive controller problem. Need immediate repair assistance.

—> Purchase or Repair:

#Procond Elettronica by Daniel Beck on 2005-12-30 13:51

The Procond Elettronica MC-70 141914 treadmill board is malfunctioning, causing a halt in the production line. Urgent repair service needed to resolve the issue and restart operations immediately.

—> Purchase or Repair:

#Procond Elettronica by Gary Diamond on 2012-05-01 06:34

ARE YOU GUYS BUY USED BOARDS PULLED FROM TREADMILLSIF SO HOW MUCH NOT TESTED? OR REPAIRED, UNLESS YOU WANTED THEM REPAIRED

—> Purchase or Repair:

#Procond Elettronica by Meyer on 2007-03-18 05:05

Hello, I'm inquiring about the pricing and availability of the Procond Elettronica MC-70 124438 treadmill controller. I'm looking to source one quickly and wanted to confirm if this is the correct model. Thank you!

—> Purchase or Repair:

#Procond Elettronica by Frelka on 2007-05-23 02:29

I'm experiencing some issues with the Procond Elettronica MC-70 124438 treadmill controller. The machine seems to have stopped working correctly, and I'm not entirely sure why. It may require further inspection to determine the exact problem.

—> Purchase or Repair:

#Procond Elettronica by Beattie on 2007-05-03 00:25

I noticed that the Procond Elettronica MC-70 124438 treadmill controller seems to be malfunctioning. It appears that something has stopped working, but I would recommend having it checked by a professional for a proper diagnosis and repair.

—> Purchase or Repair:

#Procond Elettronica by Kazmarcik on 2011-10-25 17:32

Ich benötige eine neue Elektronik

—> Purchase or Repair:

#Procond Elettronica by Marcie on 2006-11-08 19:57

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, halting production. Urgent repair service needed to restore operations immediately.

—> Purchase or Repair:

#Procond Elettronica by aro on 2007-05-31 23:50

Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or needs to be replaced? Trying to check this off my to-do list. Thank you!

—> Purchase or Repair:

#Procond Elettronica by ennikl on 2013-08-12 11:35

The Procond Elettronica 356033305 47-90 circuit board is displaying Error Code E304 intermittently, preventing the equipment from powering up. Please advise on troubleshooting steps ASAP. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Jean-Marc CARREE on 2008-05-05 09:16

Hello,I have a dishwasher Hotpoint Aquarius FDW60.(The guarantee is over). And a Procond part in it is burnt, then I want to know if it\'s possible to order this part :Procond Elettronica 41326005P/N : EN132400If it possible could you transmit me the price and how can i do that, please?Thank you.Bes…Purchase or Repair:

#Procond Elettronica by Clay Wingo/ Farrow Fabricating on 2005-12-29 19:51

The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a halt in the production line. Urgent repair service is required to resume operations without further delay.

—> Purchase or Repair:

#Procond Elettronica by Rajen on 2007-10-21 05:14

Please provide me with more information about the Procond Elettronica MC-70 124438 treadmill controller. We are looking to determine if it is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:

#Procond Elettronica by geoff hards on 2011-07-17 17:00

I have a faulty control board for AEG L74810. The resistor R82 has burnt out. I wish to replace it but I do not know it\'s value. Please can you send me the value and a schematic please?Thank you for your help.Geoff Hards

—> Purchase or Repair:

#Procond Elettronica by giles on 2005-12-09 22:47

The Procond Elettronica MC-70 124438 treadmill board in the warehouse is displaying unusual behavior - it is not functioning as it normally does.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.