Procond Elettronica Service & Repair Forum

Please provide an update on the status of my Procond Elettronica MC-70 124438 treadmill controller. It is still not working, and I need a response

—> Purchase or Repair: Ticket Image

— Posted by Mukesh Mahato on 2007-04-24

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 569 Comments

#Procond Elettronica by Gerald Harman on 2009-07-23 16:55
Please repair and tesT under load for satisfactory operation. Believe burn out at DZ1, dz4a, dz4b LOCATION ON BOARD.

—> Purchase or Repair:
#Procond Elettronica by LONNIE JOHNSON on 2007-10-05 20:05
The Procond Elettronica MC-70 124438 treadmill controller has malfunctioned, and a drive or board needs to be replaced.

—> Purchase or Repair:
#Procond Elettronica by Maurice on 2007-06-01 07:50
The Procond Elettronica MC-70 124438 treadmill controller in the warehouse is experiencing unusual behavior - it's not functioning as expected.

—> Purchase or Repair:
#Procond Elettronica by Ray Hazard on 2006-11-08 10:57
The treadmill controller (Procond Elettronica MC-70 124438) is malfunctioning, causing a halt in production. Urgent repair service is required to resume operations immediately.

—> Purchase or Repair:
#Procond Elettronica by Jim Cox on 2008-08-22 01:18
There is no resistor in R17 and JP1 and JP2 should be jumpered. What value do you have for R57?

—> Purchase or Repair:
#Procond Elettronica by reza ramezani on 2013-03-30 07:57
The Procond Elettronica 356033305 47-90 circuit board is not working.

—> Purchase or Repair:
#Procond Elettronica by milenko on 2007-11-01 23:15
The Procond Elettronica MC-70 124438 treadmill controller is showing the error code E2. The treadmill stops functioning abruptly after about 2 minutes of use. This issue is impacting our ability to provide uninterrupted services. Your

—> Purchase or Repair:
#Procond Elettronica by Andy Bren on 2008-10-20 20:57
I am an electronics tech and I am attempting to repair this MC-70 controller board. Do you have schematics on .pdf you could email me? I would sure appreciate it.Also I noticed you are hiring. Perhaps I could do some work for you on the West coast. I tried calling the number but I only got a busy to…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by matt schuessler on 2013-02-23 13:23
the Procond Elettronica 356033305 47-90 circuit board went down mid-shift. Need someone to check it out first thing in the morning. Thanks!

—> Purchase or Repair:
#Procond Elettronica by kevin on 2010-01-15 02:55
DEAR SIRS,COULD YOU TELL ME THE PRICE FOR A PROCOND ELETTRONICA PART NO. 411624430.MANY REGARDS KEVIN

—> Purchase or Repair:
#Procond Elettronica by Tom R on 2005-07-23 14:45
I have a PWM Motor Controller card from a Proform treadmill that seems to be not working. Please email me. Thanks

—> Purchase or Repair:
#Procond Elettronica by COURTNEY LEAVITT on 2006-06-22 19:34
The treadmill board on the Procond Elettronica MC-70 124438 is malfunctioning and affecting the production line. Urgent repair is needed to resume operations immediately.

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 is a treadmill controller that is currently not working.

—> Purchase or Repair:
#Procond Elettronica by R.M.SHARMA on 2007-09-13 07:54
Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Procond Elettronica by Michael Cox on 2012-07-14 14:00
Hi there wonder if you can help me find and price, a pcb for a zanussi washing machine, FJS 1425w Prod no 914512721Serial no 10400034Type P6348639IPX4PleaseRegards mike

—> Purchase or Repair:
#Procond Elettronica by abeer allen on 2006-06-10 17:11
The treadmill controller model Procond Elettronica MC-70 124438 is malfunctioning, affecting the treadmill production line. Urgent repair service needed to resolve this issue

—> Purchase or Repair:
#Procond Elettronica by nguyentanvu on 2006-06-21 02:34
Procond Elettronica MC-70 124438 treadmill controller experiencing frequent power fluctuations, affecting production line efficiency. Urgent repair service needed to resolve issue

—> Purchase or Repair:
#Procond Elettronica by TC on 2013-07-27 13:32
I'm currently experiencing difficulties with the Procond Elettronica 356033305 47-90 machine. It appears to be a circuit board issue, which has caused the machine to stop functioning as expected. I'll do my best to find a solution for this problem.

—> Purchase or Repair:
#Procond Elettronica by Jasondow on 2022-06-04 15:08
Republican politicians all over the country have repeated the Great Replacement theory A century-old racist theory reentered the political discourse around immigration and has become commonplace on the campaign trail as Republicans hope to retake control of Congress in November.—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by julien on 2018-10-27 12:59
I need to replace (or repair) the electeonic card of my dryer Faure. The Start button donnot work any more.Thanks,Michel Julien

—> Purchase or Repair:
#Procond Elettronica by GANESH PM on 2007-10-25 04:50
We experienced downtime with the Procond Elettronica MC-70 124438 treadmill board earlier today during the morning shift. Can you provide some insights on what may have caused the issue? Thank you!

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is not working.

—> Purchase or Repair:
#Procond Elettronica by Velazquez on 2009-02-05 19:54
I have some problems with my dishwasher Ariston LSI 66A, it seems the elettronic control does not work 45650110.It\'s possible to buy it on line? How does it cost?

—> Purchase or Repair:
#Procond Elettronica by ALAMGIR on 2007-09-19 17:55
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, impacting our production line. Urgent repair service required to ensure operations can resume

—> Purchase or Repair:
#Procond Elettronica by SETIABUDI on 2009-11-24 17:53
I would like to request a schematic or technical datasheet of Ref =Type Procon :451511360Type E.Z: 13200353/2SW ver USA0020515/00 T70THANKS A LOTBEST REGARDS

—> Purchase or Repair:
#Procond Elettronica by Vasanthkumar on 2007-10-06 14:57
Please provide me with information on the availability of support or replacement parts for the Procond Elettronica MC-70 124438 treadmill controller. Thank you.

—> Purchase or Repair:
#Procond Elettronica by de on 2006-06-03 19:22
The Procond Elettronica MC-70 124438 treadmill controller board is malfunctioning, causing a complete stoppage of the production line. Urgent repair service is required to rectify this issue

—> Purchase or Repair:
#Procond Elettronica by Kunasegar on 2007-03-22 09:51
I'm currently experiencing issues with the Procond Elettronica MC-70 124438 treadmill controller. It seems like something has stopped working, but I'm not exactly sure what the problem is. Any assistance you can provide would be greatly appreciated.

—> Purchase or Repair:
#Procond Elettronica by johnny on 2007-10-18 20:17
where to buy these diodes?Thanks,

—> Purchase or Repair:
#Procond Elettronica by FRANCOIS on 2012-04-30 18:15
Bonjour,je suis à la recherche d\'un condensateur réf : 411.10.5060GMF 40/100/21sh 0,15µF(X2)+ 2x 0.004µF (Y)2X0,5 mH + 1.5 MQ250 V~ 50/60Hz -10A/40°c46-94CordialementFrancois

—> Purchase or Repair:
Dear SirsNeed for technical information on the MC-70 card and power supply, I need relates to electronic card or not responding at start up.Very grateful for your attentionJavier mendoza..

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a major disruption in the production line. Urgent repair service is required to rectify the issue and resume operations

—> Purchase or Repair:
#Procond Elettronica by SHIBAN on 2006-06-21 19:34
The treadmill board on the Procond Elettronica MC-70 124438 is malfunctioning, impacting the production line. Immediate repair service is needed to restore operations swiftly.

—> Purchase or Repair:
#Procond Elettronica by roger moutal on 2007-12-10 22:48
Hi,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 451511735 . AND ALSO THE PRICE FOR A TRANSPORTATION TO FRANCE.THANK YOU

—> Purchase or Repair:
#Procond Elettronica by dulce on 2006-01-03 15:57
Procond Elettronica 45220051 675807501 board malfunctioning, affecting production line. Urgent action needed to resolve issue

—> Purchase or Repair:
#Procond Elettronica by PAUL MITCHELL on 2007-10-05 15:57
HI THERE COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 411122430 OUT OF A ZANNUSI WASHING MACHINE.MANY REGARDS PAUL.

—> Purchase or Repair:
#Procond Elettronica by Emilio Utrilla on 2013-06-03 17:10
Hello, I need where to buy or repair a Procond elettronica 3560089039 module and the price.Its for an EDESA dishwasherThank you.Hallo,Bonjour je recherche le module Procond elettronica 3560089039 (neuf ou réparation du vieil) pour un lave vaisselle EDESA et le prixMerciHola,Estoy buscando un módulo …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by ABDELAZIZ on 2006-12-01 20:16
I am following up on the previous message regarding the Procond Elettronica MC-70 124438 treadmill board. The unit is still down. We need assistance with this matter as soon as possible. Please reply

—> Purchase or Repair:
#Procond Elettronica by ERMETO on 2007-05-14 22:19
The Procond Elettronica MC-70 124438, which serves as the treadmill controller, experienced a malfunction earlier today, causing unexpected downtime from 230 PM to 445 PM. I'm seeking a brief explanation before the next shift comes in. Thank you.

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller board is malfunctioning, affecting our production line. We need immediate repair service to ensure operations resume smoothly.

—> Purchase or Repair:
#Procond Elettronica by salvador nava on 2013-08-07 11:32
The Procond Elettronica 356033305 47-90 circuit board is not working.

—> Purchase or Repair:
#Procond Elettronica by Thomas Riis on 2011-11-18 07:29
Hi,We have a defect controller board : \"3560144009\" from Procond Elettronica.It fails by periodically stops the motor and heating elements. It seems that the ignition for the motor is unstable. For me it sounds like it is a moped / motorcycle with a bad ignition :-)Please could you inform me what …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Matthias on 2007-08-25 10:29
Dear Sir In our Ariston dishwasher LSI 62 A, we have the printed circut, typ: GE Precond Elettronica 356084601. My question is, if we can get this part checked or buyed in Germany?With regardsMatthias

—> Purchase or Repair:
#Procond Elettronica by justin igarashi on 2007-05-18 17:21
The unit you're referring to is the treadmill controller Procond Elettronica MC-70 124438. The issue you're experiencing with it is erratic behavior.

—> Purchase or Repair:
#Procond Elettronica by Mirwanto on 2009-03-16 06:36
Dear Sir,My LUX washing machine, the CPU is not working properly, so the tachniciant replace them with the new one. the CPU written as below: GE Procond ElettronicaType P4515100093 F6495Type E.1234303983SW Ver.W2C01551 06/feb/04EWM2000 WMS WMV200APMMy question is can that CPU be repair. give me your…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Andrew Walford on 2008-12-08 19:30
Hi can you gve me a price for the above, cheers

—> Purchase or Repair:
#Procond Elettronica by Lucjan Raubic on 2006-01-14 18:54
The treadmill controllers of Procond Elettronica MC-70 124438 are malfunctioning, halting production. Urgent repair service is needed to resolve this issue

—> Purchase or Repair:
#Procond Elettronica by Nichols on 2006-06-23 09:34
The treadmill board of the Procond Elettronica MC-7012 124438 is malfunctioning, affecting the production line. Urgent repairs are needed to resume operations immediately.

—> Purchase or Repair:
My dishwasher Ariston LSI 61 E has broken down.Please How Much cost the board sended to Italy in caserta.Thanks

—> Purchase or Repair:
#Procond Elettronica by Maliki herman on 2012-12-03 04:30
I need chasis mounted filter type efnf 3,in indonesia maybe semarang..please info to pay,tq

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.