NSK Service & Repair Forum

Hi :we need repair some parts NSK servodrive or servo motor Do you have NSK E043SAPA1-002 for sale..

β€”> Purchase or Repair: Ticket Image

β€” Posted by Brian Tam on 2007-05-21

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "NSK"

If you need your NSK unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 96 Comments

#NSK by KUMARADEVAN SANTANADEWAN on 2009-06-08 10:55
I have one unit of NSK motor controller model NSK AMD EXC3 for repair.I would like to have advice, the frequent faulty of this module during production. Most of the fauly is burn IC of M1050 at Y and X- axis motor. Pls advice!

β€”> Purchase or Repair:
#NSK by TOMAS MARIN on 2010-07-02 23:25
I GOT A PROBLEM BUT I DONT KNOW WHERE COULD BE IF IN MOTOR OR IN DRIVE MY DRIVE IS AN NSK ESA Y3040TF120 AND THE MOTOR THE FAULT ON THE DRIVE IS F-1 AND A- 4 AND THE MAIN PROBLEM IS ON THE TOURRET INDEXING SO I CAN NOT SEE ON DYSPLAY THE NUMBER OF THE TOOL

β€”> Purchase or Repair:
#NSK by Henri on 2014-01-05 10:53
Hello, I'm in the purchasing department and a colleague needs a replacement for an NSK ESA 4-65006-700 Drive. We can't locate one. Could you provide repair information? Thanks!

β€”> Purchase or Repair:
#NSK by Navjot Singh on 2007-09-24 11:06
plz email the detail Manual and Software for NSK Servo ESA B045Af3-21 . with Regard Navjot Singh

β€”> Purchase or Repair:
#NSK by mansuk hong on 2008-04-09 05:20
I\'d like to get a manual for nsk that is ESB014CFI-01A.I\'VE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY I\'M NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

β€”> Purchase or Repair:
#NSK by Chitfreerve on 2014-10-31 22:57
The NSK ESA 4-65006-700 drive unit experienced a malfunction earlier today, causing downtime from 130 PM to 300 PM. We need to address this issue

β€”> Purchase or Repair:
#NSK by Sergio Rodriguez on 2012-06-14 22:38
NSK Servo Drive Repair Model: EM1010A15-05 We have a NSK Servo Drive in bad conditions, when we turn on the machine light leds.I appreciate your comments, in case that you can to repair my servo drive.Best Regards Sergio Rodriguez Plant chiefProduction DepartmentAv. Los pinos #7 A Col. Los pinosGuad…Purchase or Repair: Ticket Image...
Show More
#NSK by Doreen Rogers on 2010-11-18 18:01
Hello, I am looking for the following bearing for NSK RW1410FN523 servo motor.The part number is 150DXR007DD / NRXT15025 C8P5 sealed bearing outer race / inner race Is this something you may have available for sale ?

β€”> Purchase or Repair:
#NSK by Alex Cheong on 2012-02-17 04:24
Dear Sir,We are trading company located in Malaysia looking for the possibility to repairing several type of OEM NSK DD motor and Driver as below,DD Motor type,1) M-JSB015FA503DD motor Drivers,2) M-ESA-D017-CF13) ESA-JB015CF3-204) M-EDC-PS3015CB5F5-01Kindly advise the possibility, prices, lead time,…Purchase or Repair: Ticket Image...
Show More
#NSK by ANIL KUMAR P on 2008-08-21 09:05
Dear sir Please send english vertion manual of K20093-01-01 . PDF manual belongs to NSK servo drive model no. = β€šdβ€šwβ€šdβ€š`β€šP|β€šOβ€šOβ€šPβ€šOβ€š`β€šOβ€šO|β€šOβ€šRRegardsAnil

β€”> Purchase or Repair:
#NSK by Kevin Lim on 2011-05-24 01:23
My Scanray X-ray systems having the problem to activite X-ray operation, every time I\'m switched on the X-ray operation and it turn down immediately, and the control panel can not adjust the Ma setting. it is always fixed at 2Ma.

β€”> Purchase or Repair:
#NSK by valerio hernandez on 2024-08-20 13:55
The NSK ELA-B014CFC-03 unit in the warehouse is displaying unusual behavior; it's not functioning as it normally does. Please investigate the issue further to determine the cause and potential solution.

β€”> Purchase or Repair:
#NSK by Marcell on 2014-07-29 21:24
The NSK ESA 4-65006-700 drive seems to be experiencing some issues, as something has stopped working. I apologize for not being able to provide a more detailed description, but we'll do our best to get it sorted out for you. Thank you for your understanding.

β€”> Purchase or Repair:
#NSK by Jim Bianchi on 2014-12-29 13:54
I am following up on the previous message regarding the NSK ESA 4-65006-700 Drive unit. The unit is still down. Please ensure someone gets back to me

β€”> Purchase or Repair:
#NSK by BIOTECH on 2014-12-03 23:23
Can this NSK ESA 4-65006-700 Drive be repaired or bought? I am looking to check this off my to-do list.

β€”> Purchase or Repair:
#NSK by Andy on 2007-10-08 13:13
I from Russia.We do not have service NSK.I have read through the message I wish to ask. Service a manual is necessary to me.At me has deteriorated ESK-Y4080FT1-20 the driver.The ballast resistor 200 Ohms and the field transistor 2SK2662 burns down.I want the scheme or consultation.β€”> …Purchase or Repair: Ticket Image...
Show More
#NSK by BesterPreisvergleich on 2011-12-04 10:31
Hallo, ich habe eine tolle Seite entdeckt,bei der man einfach den billigsten Preis fΓΌr allerlei Dinge suchen kann. Hier ist der link Bester Preisvergleich Ach ja, ausserdem findet man dort jede Menge Gutscheine, was natΓΌrlich toll ist!.

β€”> Purchase or Repair:
#NSK by Eric Ronnebaum on 2015-10-28 15:15
Dear sales I need a repair on a nsk RW1410FN523 motor. My customer is stating it making loader then normal noises and it harder to rotated by hand. The NSK amplifier is M-EP1410A15-05We would like to have a estimate if possible to go through it. I don\'t know if this is possible without looking at t…Purchase or Repair: Ticket Image...
Show More
#NSK by Gilberto Saraiva on 2008-03-14 00:18
Good Morning:I need the manual of servo drive EM0608A05-05 NSK. Could you help-me please?.Thanks a lot

β€”> Purchase or Repair:
#NSK by Elkowich on 2014-02-13 04:58
The NSK ESA 4-65006-700 Drive unit is currently not functioning. Please investigate and provide a status update. Thank you.

β€”> Purchase or Repair:
#NSK by James Park on 2010-10-20 00:24
Hello,We have a upper and lower driver we need to get repaired. The type is ESA-B014CFC-21 and the NO. is B-13004-700. They both are not accurate so we were wondering if we can send them to you guys and have the calibrated. Please give me a call back or shoot me an email and hopefully we can figure …Purchase or Repair: Ticket Image...
Show More
#NSK by ZIJLMANS on 2014-05-01 17:20
The NSK ESA 4-34018-700 drive is displaying Error Code E567. Equipment is not responding and motor is making a loud grinding noise. Urgent issue, please advise on next steps.

β€”> Purchase or Repair:
#NSK by DAVID CONTRERAS on 2014-12-06 06:23
The NSK ESA 4-34018-700 drive unit isn't working.

β€”> Purchase or Repair:
#NSK by Behr on 2014-02-16 17:58
The NSK ESA 4-65006-700 unit is not functioning. It is a drive unit.

β€”> Purchase or Repair:
#NSK by Hans van der Hoorn on 2025-06-01 18:27
The NSK EM1010A15-05 drive unit is not working. Please check and repair.

β€”> Purchase or Repair:
#NSK by Chansac on 2014-02-13 07:58
NSK ESA 4-34018-700 is showing error code E403 and not responding. Need urgent assistance to troubleshoot and restore operation.

β€”> Purchase or Repair:
#NSK by Volker Schmidt on 2009-01-07 10:26
We hava some drivers with the PN ESA-BO14CFD-21 or ESA-BO14CF3-11I can communicate over hyper terminal but not all command work, TS, TC, IO0/RB but some commands do not work like TT, MN.Do you have any idear?Thanks for help Volker

β€”> Purchase or Repair:
#NSK by Todd Havinga on 2008-02-21 21:30
Is there a reason why we have to constantly recalibrate the Home position on these drives, We are usins the ESA-Y3040T25-21

β€”> Purchase or Repair:
#NSK by Andy on 2012-11-29 23:34
I can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive? Thanks for any Ideas. Andy

β€”> Purchase or Repair:
#NSK by Tafheem on 2013-04-30 00:00
NSK ESA-Y3008A25-21 power supply unit is not turning on despite being plugged in. Need immediate repair assistance.

β€”> Purchase or Repair:
#NSK by Vacev on 2014-12-27 00:06
Could you please provide me with information on pricing and availability for the NSK ESA 4-65006-700 Drive? I am interested in sourcing one quickly. Thank you.

β€”> Purchase or Repair:
#NSK by Cheol Min Part on 2009-06-25 14:17
Dear Sir.I wonder whether you can fix this driver or not.(M-ELC-JG014VF1)If you can, let me know estimates and delivery time.If you need picture, I\'ll send you some pictures.Thanks.

β€”> Purchase or Repair:
#NSK by Chester Yong on 2010-08-12 09:15
dear sir,I would to check that do you able to repair this NSK driver model: ESA 23?

β€”> Purchase or Repair:
#NSK by Andy on 2012-11-29 23:44
We are working on our study thesis and our problem is we can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive and how we could possible sol…Purchase or Repair: Ticket Image...
Show More
#NSK by Anand on 2009-06-27 11:07
Dear repair center,We need to repairing NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!Warm regardsAnand

β€”> Purchase or Repair:
#NSK by azadeh on 2014-05-01 22:20
Hello, our NSK ESA 4-65006-700 drive is down with error code E302. Urgent assistance needed to troubleshoot and resolve the issue. Thank you.

β€”> Purchase or Repair:
#NSK by suresh on 2009-02-16 17:39
we bought RF TX and RX encoder decoder kits from nsk electronics.but when we use our modules there is no output.if we come to u whether u test it

β€”> Purchase or Repair:
#NSK by Ray Paden on 2014-12-17 05:44
The NSK ESA 4-65006-700 drive unit malfunctioned today at 1045 AM, causing unexpected downtime on the production line. Can you quickly check the issue and provide a solution before the next shift starts? Thank you.

β€”> Purchase or Repair:
#NSK by Vishnumurthy on 2010-04-16 14:46
Please send me the PDF for type ESA-B045AF3-21 number B-2X011-700.And also provide the service center name/ details in Bengaluru, Karnataka, India.RegardsVishnumurthy

β€”> Purchase or Repair:
#NSK by marjan cresnar on 2008-04-08 06:53
we have a problem whit NSK servo drive Type ESA-Y2020T23-11Nr. Z-85192 -700Fault on electronic plate NSK Eo43SACB1-001Pleace give as offer for repaire or a new one.Best RegardsMarjan

β€”> Purchase or Repair:
#NSK by dao on 2023-09-30 00:00
The Nsk esa-j1003af2-11 ESA Servo Drive is malfunctioning, causing a production line downtime. Urgent repair is needed to restore operations

β€”> Purchase or Repair:
#NSK by ScottHug on 2017-10-14 02:46
#NSK by Dave Allen on 2009-01-19 14:09
We have a problem with ALL of our Tacumi toolchanger magazine carousels, when the magazine 1st homes the position is ALWAYS different.This is the SAME problem on EVERY machine.They all use the same NSK drive and motor.Drive type: ESA-Y3040T25-21 Motor type: YS3040FN501, No. 3Y31019Can you offer ANY …Purchase or Repair: Ticket Image...
Show More
#NSK by Thoma on 2014-02-17 07:58
Hello, I'm interested in the NSK ESA 4-65006-700 drive. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you!

β€”> Purchase or Repair:
#NSK by Amal Raj on 2009-04-27 16:31
Dear sirPlz send pdf ofesa-b045af3-21RegardsS.Amal Raj

β€”> Purchase or Repair:
#NSK by Eric Enloe on 2014-02-14 11:58
Hello, I'm reaching out on behalf of a client who needs assistance with an NSK ESA 4-65006-700 drive. Can you please provide information on repair services available for this part? Thank you.

β€”> Purchase or Repair:
#NSK by Animesh on 2008-09-25 15:52
I have got a problem that the servo motor is getting fault.How could I repair when I get P1,P2 such kind of warning.

β€”> Purchase or Repair:
#NSK by SABINUS on 2025-05-23 13:43
Hello, do you have an NSK ESA-B014CFD-21 driver available for sale or repair? Need it urgently for production. Thank you.

β€”> Purchase or Repair:
#NSK by HEDI on 2011-11-09 08:40
Hello,We need a servo drive NSK Ref: EM040BK13-05/NSK Machine NETSTAL injection (injection of CD-R), No. :04-2323-65.Thank you for sending me your best price offer

β€”> Purchase or Repair:
#NSK by RAFAEL LOYA on 2008-08-03 19:35
I HAVE A PROBLEM WHIT A SERVO DRIVE AMP ESA_Y3040T25-21, I NEED A CATALOG OF ITEM PLEASE THANKS ALL

β€”> Purchase or Repair:

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.