Anilam Service & Repair Forum
we got a new cnc lathe in our shope with an anilam crusader II control but if we try to jog the axis in manual mode you get an error code 18 we know what the book says about it but we do not know what to do to fix it any help would be greatly appreciatedThanks,David
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "Anilam"
- Anilam → Anilam WIZARD 350 A1920001 ↗
- Anilam → Anilam WIZARD 111 A1480111 ↗
- Anilam → Anilam error code 18 ↗
- Anilam → Anilam MINI WIZARD A163-20000 ↗
- Anilam → cmos memory ↗
- Anilam → Anilam Crusader II Model # A225-102113 ↗
- Anilam → touch pad membrane for Anilam Crusader M ↗
- Anilam → Anilam anilam crusader m ↗
- Anilam → i have also problem +x or -x limit ↗
- Anilam → Anilam 1100 control ↗
- Anilam → Anilam crusader 2 l ↗
- Anilam → Anilam Crusader II 3Axis Z axis problems ↗
- Anilam → anilam error code 18 ↗
- Anilam → Anilam Cursador II ↗
- Anilam → Anilam : +X OR -X LIMIT ANILAM. ↗
- Anilam → ANILAM CRUSADER-2 ↗
- Anilam → ANILAM CRUSADER-2 WIRING DIAGRAM ↗
- Anilam → 1100 Software ↗
- Anilam → Anilam Anilam Crusader II wiring Diagram ↗
If you need your Anilam unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 397 Comments
Hi there, could you please provide repair information for a non-working Anilam Electronics Corp. Series 1100 31900394 Control Unit? We need a quick resolution. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
I need repairs for my Anilam Wizzard A1662000000 digital readout unit. It's not displaying any information properly and seems to be malfunctioning. Please let me know if you can help fix it.
—> Purchase or Repair:
—> Purchase or Repair:
i have a milling machine with a anilam crusader when i start up the machine he gives a error 18 after 3 seconds and the x as moves 0.5 mm the machine have indramat servos please can you help me
—> Purchase or Repair:
—> Purchase or Repair:
The ANILAM WIZARD 450 A245300 in the warehouse is exhibiting unusual behavior. It's not functioning as it normally does, behaving erratically, but I am unsure of the exact issue.
—> Purchase or Repair:
—> Purchase or Repair:
The screen on the Anilam Wizard 450L A245210 unit in the warehouse is displaying erratic behavior, not functioning as usual.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 350 Plus A1920001 is displaying error code E301. Equipment is not responding to commands and appears to be frozen. Please advise on next steps for troubleshooting and repair.
—> Purchase or Repair:
—> Purchase or Repair:
I am experiencing some issues with the Anilam Patriot A1480001 digital readout system. It seems like a part of the machine has stopped working properly. Would you be able to provide some guidance or assistance?
—> Purchase or Repair:
—> Purchase or Repair:
The XY Axis Controller (Anilam mini wizard A163-20000) just failed on one of the machines. Need to get this fixed ASAP for smooth operation.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if the Anilam Wizzard A1662000000 is still supported and if replacement parts are available for this digital readout unit?
—> Purchase or Repair:
—> Purchase or Repair:
The ANILAM WIZARD 450 A245300 unit is described as an encoder and is currently not functioning properly.
—> Purchase or Repair:
—> Purchase or Repair:
Hi john I called you earlier about connectors for servo driver card. We had cmos setting problems and fixed them on the 1100 by replacing the cpu board bios chip which contains internal batteries. We can walk you throughit if you need help. Interesting how your post about this problem poppedup in fr…Purchase or Repair: 
...
Show More
Show More
Can the Anilam A1920001 controller be repaired or bought? I'm trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 450L A245210 screen is blank, with no display showing up. Need urgent assistance to diagnose and resolve this issue to get the equipment back up and running.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am interested in purchasing the Anilam Electronics Corp. Wizard 350+ A1920001 Display Unit. Could you please provide me with information on pricing and availability? I am looking to source one quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I need assistance with my Anilam A1920001 controller. The unit is still down. Please respond
—> Purchase or Repair:
—> Purchase or Repair:
The unit ANILAM WIZARD 450 A245300 is labeled as an "ENCODER" but I'm not completely sure what its function is. It seems to be malfunctioning and requires maintenance.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizzard A1662000000 is displaying error code E-345. Machine is not detecting tool changes and prevents operation. Need immediate assistance to troubleshoot and resolve the issue.
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, we need repair info for our Anilam Patriot A1480001 digital readout, can you provide assistance or recommend a repair shop? Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Patriot A1480001 digital readout unit in the warehouse is exhibiting unusual behavior. It is not functioning as it typically does, although I'm not certain what this electronic device is called.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please assist in verifying if the Anilam Wizard 450L A245210 is still supported for repairs or if replacement parts are available? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
just found a failed drive/board on the Anilam 1100M A7010000 motor controller. Needs immediate attention. I'll be moving onto the next machine for now.
—> Purchase or Repair:
—> Purchase or Repair:
One of the PCB boards in the controller came off it\'s mountings during transport and was damaged. The servos do not power up and the release for Spindle operation is not enabled (even in Spindle manual). Do you need the electrical schematics that I have to make the repair?
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an Anilam mini wizard A163-20000 XY Axis Controller available for sale or repair? Our unit is down, and we need to keep production running. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I believe there might be an issue with the display unit on the Anilam Miniwizard A163-2000. It seems like it has stopped functioning properly. I recommend reaching out to a technician for further assistance to address this problem.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam A1920001 controller just went down, drive or board issue need to swap it out ASAP to get back online.
—> Purchase or Repair:
—> Purchase or Repair:
I'm having trouble with the ANILAM WIZARD 450 A245300. It's related to the encoder, but I'm not quite sure what the issue is. Would you be able to provide some guidance on how to troubleshoot this problem?
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing trouble with the Anilam Wizard 111 A1480111 digital readout. It seems like something has stopped working, but I'm not sure what exactly. Any assistance you can provide would be greatly appreciated.
—> Purchase or Repair:
—> Purchase or Repair:
Our Anilam Wizard 350 Plus A1920001's Digital Display Module is malfunctioning, impacting production line efficiency. Please schedule urgent repair to minimize downtime and resume operations
—> Purchase or Repair:
—> Purchase or Repair:
Hello, our Anilam Wizard 111 A1480111 digital readout is displaying Error Code 302. The machine is not responding and seems to be stuck. Please advise on troubleshooting steps or repairs needed. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Miniwizard A163-2000 display unit is not functioning. Maintenance team needs assistance.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am interested in purchasing an Anilam Wizard 450 A245200 unit for the screen. Could you please provide me with information regarding its pricing and availability? I'm looking to source one quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I would like to inquire about the pricing and availability of the Anilam Wizard 111 A1480111. I'm trying to source one quickly but am not 100% sure if this is the right model. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an ANILAM 3000 TOUCH A7334029 in stock for sale? Our unit went down, and we need to get production up and running.
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with my Anilam Wizard 111 A1480111 DRO unit. Need a technician to diagnose and repair
—> Purchase or Repair:
—> Purchase or Repair:
I'm having trouble with the Anilam A1920001 controller. It seems like something has stopped working, and I'm unsure what the issue may be. Any assistance or guidance would be greatly appreciated.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Electronics Corp. Wizaed 350+ A1920001 is not working. Please check.
—> Purchase or Repair:
—> Purchase or Repair:
We need immediate assistance with the ANILAM WIZARD 450 A245300. The unit is still down and we require support ASAP. Kindly prioritize this issue and provide a
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am interested in purchasing an ANILAM WIZARD 450 A245300 encoder. Could you please provide me with information regarding pricing and availability? I am looking to source this unit quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Sir, We have purchased 1 used Ernault Samoua milling Machine model ZHV-1.travels of the machine x,y,z are 710*270*400. Machine has been retrofittedwith Anilam Microprocessor model CRUSADER-2.problem with the machine isthat when machine is switched on, the display on the monitor is showingERROR-18 an…Purchase or Repair: 
...
Show More
Show More
I have an Anilam 1100 control that wont keep the cmos settings. The control starts to boot up but then tells me to push F2 to enter setup. I enter setup then save the changes but when I reboot the control does the same thing. What can be done to fix my problem?
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Electronics Corp. Series 1100 31900394 Control Unit experienced a malfunction earlier today, causing downtime from 1000 AM to 1230 PM. Need quick insights before the next shift starts.
—> Purchase or Repair:
—> Purchase or Repair:
DEAR SIRORDNANCE FACTORY, MINISTRY OF DEFENCE, TIRUCHIRAPALLI- 620 016, (TAMILNADU STATE), SEARCHING FOR CNC SYSTEM AND DRIVE SERVICING AGENCY, WHO CAN REPAIR KIRLOSKAR CRUSADER MARK-II SYSTEM FITTED ON BFW VERTICAL MILLING MACHINE . KINDLY INTIMATE THE FEASIBILITY OF REAPAIRS OF THE SAME AT YOUR WO…Purchase or Repair: 
...
Show More
Show More
Anilam Wizard 450L A245210 is experiencing a screen malfunction disrupting production. Please address urgently to restore operations
—> Purchase or Repair:
—> Purchase or Repair:
the ANILAM WIZARD 450 A245300 is down. Issue seems to be with the encoder. Please check it out first thing in the morning. Thanks.
—> Purchase or Repair:
—> Purchase or Repair:
i have anilam 1100 control with bridge port i have change Battery but now i have start machine y axis go to Negative direction and message Y axis lag over.
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: