Procond Elettronica Service & Repair Forum

The Procond Elettronica MC-70 treadmill controller is displaying error code E5, and the treadmill belt stops abruptly during use. Please advise on troubleshooting and repair options. Thank you.

—> Purchase or Repair: Ticket Image

— Posted by shinos on 2007-08-21

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 569 Comments

#Procond Elettronica by Blenderdwt on 2022-01-23 04:42
Of his works, he is especially famous

—> Purchase or Repair:
#Procond Elettronica by sarwar alam on 2006-06-10 21:11
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, leading to a disruption in the production line. We need immediate repair service to address this issue and resume operations swiftly.

—> Purchase or Repair:
#Procond Elettronica by WILDKATpvt on 2021-11-22 10:41
Europe, and in Ancient Russia

—> Purchase or Repair:
#Procond Elettronica by Peter Cronje on 2006-06-23 00:34
The treadmill board on the Procond Elettronica MC-70 124438 is malfunctioning, disrupting the production line. Please expedite service to address and rectify the issue

—> Purchase or Repair:
#Procond Elettronica by oliver sardo on 2005-06-01 14:56
The Procond Elettronica MC-70 124438 treadmill board unit is displaying abnormal behavior, not functioning as it typically does. Further troubleshooting or inspection may be necessary to determine the issue.

—> Purchase or Repair:
#Procond Elettronica by Ben Hinx on 2011-04-21 10:10
Is it possible to purchase the control unit for an AEG Oko Lavamat 72630 update:GE Procond Elettronicatype P - 451510051 F:4875Type E - 12430392/5SW Ver - W2C01250 26/00

—> Purchase or Repair:
#Procond Elettronica by Randy Engle on 2007-10-24 14:18
Do you have a replacement Procond Elettronica MC-70 124438 treadmill board available for sale or repair? Our unit is down, and we need to keep production running.

—> Purchase or Repair:
#Procond Elettronica by Deremer on 2007-09-29 00:09
The Procond Elettronica MC-70 124438 treadmill controller is displaying Error Code E3, which suggests a potential issue with the speed sensor. Resetting the system did not resolve the problem, and the treadmill is currently not operational. Please advise on next steps for troubleshooting and repair.…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by ADNAN HRNJIC on 2011-11-23 21:31
Hello,I would like to order part no.411312431 and how much it cost

—> Purchase or Repair:
#Procond Elettronica by Dan Baldauf on 2008-06-20 23:44
I have a treadmill that when turned on starts slowly for about 1 minute and then shuts down. it displays an Er2 error message. Any thoughts on what is wrong the cost it might be to fix it.????Dan

—> Purchase or Repair:
#Procond Elettronica by Moskovich on 2007-09-18 21:05
Hello, I'm interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you!

—> Purchase or Repair:
#Procond Elettronica by Belmont on 2006-05-29 20:42
The Procond Elettronica MC-70 124438 treadmill controller board is malfunctioning, halting our production line. Urgent repair service required to get operations back on track swiftly.

—> Purchase or Repair:
#Procond Elettronica by JOHN BUSCHER on 2018-05-02 20:00
Machine error Error code E5 displayed on Procond Elettronica MC-70 124438 treadmill board.

—> Purchase or Repair:
#Procond Elettronica by Gerry Miller on 2006-12-24 04:00
Hello, do you have a Procond Elettronica 452200190 KK88102678 board available for sale or repair? Our unit is down, and we need to keep production running. Thank you.

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller board is malfunctioning, affecting our production line. We need immediate repair service to ensure operations resume smoothly.

—> Purchase or Repair:
#Procond Elettronica by lajcsi on 2010-11-23 13:27
please service manual

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is not working.

—> Purchase or Repair:
#Procond Elettronica by Usman on 2007-10-03 10:07
The Procond Elettronica MC-70 treadmill controller is displaying error code E2. The treadmill is not responding to speed adjustments and abruptly stops after a few seconds. Looking for immediate assistance to diagnose and resolve the issue.

—> Purchase or Repair:
#Procond Elettronica by Mukesh Mahato on 2007-04-24 21:20
Please provide an update on the status of my Procond Elettronica MC-70 124438 treadmill controller. It is still not working, and I need a response

—> Purchase or Repair:
#Procond Elettronica by WILDKATmln on 2022-03-07 20:36
manuscripts held onto

—> Purchase or Repair:
#Procond Elettronica by Angelo on 2006-06-20 15:32
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, affecting the production line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:
#Procond Elettronica by Stan may on 2007-04-04 19:56
Hello, I'm interested in the Procond Elettronica MC-70 124438 treadmill board. Could you please provide information on pricing and availability? I'm hoping to source one quickly. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Tamadite on 2015-11-04 22:02
Can you please give me the value of component C34 of PCB Procond 3560144029?

—> Purchase or Repair:
My dishwasher Ariston LSI 61 E has broken down.Please How Much cost the board sended to Italy in Reggio Calabria.Thanks

—> Purchase or Repair:
#Procond Elettronica by Lind on 2005-12-30 14:51
The Procond Elettronica MC-70 control board on the treadmill line is malfunctioning, causing repeated shutdowns during operation. This issue is impacting productivity and needs urgent attention from the repair service to minimize downtime.

—> Purchase or Repair:
#Procond Elettronica by Shovers on 2007-11-02 23:28
MC-70 124438 treadmill controller not responding to power.

—> Purchase or Repair:
#Procond Elettronica by THINH NGUYEN on 2006-02-22 16:57
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, halting production on the line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:
#Procond Elettronica by Niels Sylvest on 2020-09-04 14:35
I have a printcard it is mounted in AEG Electrolux Lavatherm TN95670is it possible to repair, so that machine can be used again, there is no light in the panel at all, and the repair man told me that the failure is in the computer/print.please inform me adress for repair of the card in Denmark—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by elsisura on 2013-02-07 20:18
The circuit board on Procond Elettronica 356033305 47-90 is malfunctioning, causing a major disruption on the production line. Urgent repair service needed to resolve this issue immediately.

—> Purchase or Repair:
Ronco Scrivia, 06/09/2011Vi sarei grato se poteste inviarmi preventivo di spesa ed eventuale indirizzo di spedizione per la riparazione della scheda in oggetto.Ringrazio anticipatamente.Gian Piero Traverso

—> Purchase or Repair:
#Procond Elettronica by marco azevedo on 2011-05-11 10:42
hi all. if possible give us a schema of procond electronica bord 35600a1139 of washing machine from electrolux ewf 1035 models.all regraetsMarco azevedo

—> Purchase or Repair:
#Procond Elettronica by mark on 2007-03-08 23:48
DZ4 A and B are both the same which turn out to be 12 volt 5 watt. for an upgrade you can only go so high on the voltage and from what NTE says 13 volts keeps the diodes cool enough. Also if you solder them in, don\'t push them to the board. Let them sit up some to allow total venting around the dio…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by mehmet on 2007-04-04 02:19
The Procond Elettronica MC-70 124438 is not working.

—> Purchase or Repair:
#Procond Elettronica by ennikl on 2013-08-12 11:35
The Procond Elettronica 356033305 47-90 circuit board is displaying Error Code E304 intermittently, preventing the equipment from powering up. Please advise on troubleshooting steps ASAP. Thank you.

—> Purchase or Repair:
#Procond Elettronica by volta on 2006-12-08 14:16
Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or purchased? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:
#Procond Elettronica by MEYERS on 2006-11-16 05:57
Experiencing issues with Procond Elettronica MC-70 124438 treadmill board. Need a skilled technician to repair an industrial unit immediately. Thank you.

—> Purchase or Repair:
#Procond Elettronica by marc schmuck on 2010-03-29 16:20
Hello, can zou give me a price for follow boardType P. 451510050Type E. 12430392/4SW Ver. W2C01202ThanksbrMarc Schmuck

—> Purchase or Repair:
#Procond Elettronica by karim on 2006-12-08 21:16
The board in the Procond Elettronica MC-70 124438 treadmill controller has failed, needs replacement ASAP. Please order a new one to ensure timely repair.

—> Purchase or Repair:
#Procond Elettronica by Rajeev Nanda on 2006-06-22 10:34
The treadmill controller for the Procond Elettronica MC-70 124438 is malfunctioning, affecting the entire production line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:
#Procond Elettronica by patrick on 2012-04-18 17:19
This Procond elettronica is bad because no responces!!!

—> Purchase or Repair:
#Procond Elettronica by Marceta Predrag on 2013-09-11 08:28
Hello, I am reaching out regarding the Procond Elettronica 356033305 circuit board. We are requesting information regarding the availability of support, repairs, or replacement parts for this unit. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Beattie on 2007-05-03 00:25
I noticed that the Procond Elettronica MC-70 124438 treadmill controller seems to be malfunctioning. It appears that something has stopped working, but I would recommend having it checked by a professional for a proper diagnosis and repair.

—> Purchase or Repair:
#Procond Elettronica by Tebbutt on 2007-10-04 13:28
I require urgent assistance with the Procond Elettronica MC-70 124438 treadmill controller. The unit is still not functioning, and I need someone to address the issue

—> Purchase or Repair:
#Procond Elettronica by PARACHA on 2007-07-12 03:28
The Procond Elettronica MC-70 124438 is not working and needs attention.

—> Purchase or Repair:
#Procond Elettronica by MAnuel Osegueda on 2006-01-07 22:04
Procond Elettronica MC-70 124438 treadmill controller malfunctioning, halting production. Urgent repair service needed to rectify issue

—> Purchase or Repair:
#Procond Elettronica by jeff on 2008-06-01 16:13
what are the values? i assume they are zener diodes, since the other diodes are labeled d10, d15, etc without the Z

—> Purchase or Repair:
#Procond Elettronica by Telecasterkds on 2021-11-20 12:32
only a few survived.

—> Purchase or Repair:
#Procond Elettronica by Jeff Spriggs on 2007-11-01 22:15
Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Procond Elettronica by Datexpro on 2007-07-19 19:25
The Procond Elettronica MC-70 124438 treadmill controller unit is not working.

—> Purchase or Repair:
#Procond Elettronica by GANESH PM on 2007-10-25 04:50
We experienced downtime with the Procond Elettronica MC-70 124438 treadmill board earlier today during the morning shift. Can you provide some insights on what may have caused the issue? Thank you!

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.