Troubleshooting NSK: Common problems and repair info

Nsk Manual | NSK Repair

NSK Service & Repair Forum

plz email the detail Manual and Software for NSK Servo ESA B045Af3-21 . with Regard Navjot Singh

—> Purchase or Repair:

— Posted by Navjot Singh on 2007-09-24

Reply🗨️Ask a New Question Below❓

Recent 96 Comments

#NSK by karim on 2006-03-06 00:00

NSK 4083141 showing no power or response when turned on. Need immediate repair service to diagnose and fix issue.

—> Purchase or Repair:

➡️ Reply

#NSK by Virgil on 2014-12-28 10:06

NSK ESA 4-65006-700 drive just failed, need urgent attention. Moving to next machine now to continue rounds.

—> Purchase or Repair:

➡️ Reply

#NSK by Mcguinness on 2014-12-23 15:06

Please provide me with detailed information about the NSK ESA 4-34018-700 Drive. We are looking into the possibility of finding replacement parts or repair options for this unit. Could you please confirm if it is still supported or if any parts are available for it? Thank you. —> …Purchase or Repair:

➡️ Reply

#NSK by George Morrow on 2025-05-30 06:07

I'm interested in purchasing an NSK B014CF7-02 Servo Drive. Do you have one available for sale or repair?

—> Purchase or Repair:

➡️ Reply

#NSK by Behr on 2014-02-16 17:58

The NSK ESA 4-65006-700 unit is not functioning. It is a drive unit.

—> Purchase or Repair:

➡️ Reply

#NSK by Tafheem on 2013-04-30 00:00

NSK ESA-Y3008A25-21 power supply unit is not turning on despite being plugged in. Need immediate repair assistance.

—> Purchase or Repair:

➡️ Reply

#NSK by brecea on 2014-02-10 21:04

Could you please provide repair information for NSK ESA 4-34018-700 Drive? It's urgent, and we're on-site trying to get it fixed quickly. Thank you!

—> Purchase or Repair:

➡️ Reply

#NSK by Peter Hamvai on 2009-05-11 13:34

Dear repair center,I\'m searching for a used(repaired) NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!If you haven\'t from this modul, please let me know around what is the repairing time with delivery if the wrong one is on Hungary now?!kind regardsPeter Hamvai—> …Purchase or Repair:

➡️ Reply

#NSK by Leo Solomon on 2016-11-15 09:13

Gud DayThe NSK ESA-Y2003A23-21 driver that we have is having a big trouble on its communication , it wont make the motor to initialize, it only goes on one side of initialization and does not goes to its original position, but when we try to manually rotate it using handy controller configuration, i…Purchase or Repair:

➡️ Reply

#NSK by Curtis Indy on 2011-01-31 14:34

We are running an NSK ESA-Y2020A25-21 drive. On startup it displays an error code of E0A4. What is this error and is it a repair situation?

—> Purchase or Repair:

➡️ Reply

#NSK by edward on 2024-11-06 00:00

NSK ESA-B014CF3-11 servo drive not responding. Production halted. Need immediate assistance to troubleshoot and repair.

—> Purchase or Repair:

➡️ Reply

#NSK by Eric Enloe on 2014-02-14 11:58

Hello, I'm reaching out on behalf of a client who needs assistance with an NSK ESA 4-65006-700 drive. Can you please provide information on repair services available for this part? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Ray Paden on 2014-12-17 05:44

The NSK ESA 4-65006-700 drive unit malfunctioned today at 1045 AM, causing unexpected downtime on the production line. Can you quickly check the issue and provide a solution before the next shift starts? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by James Park on 2010-10-20 00:24

Hello,We have a upper and lower driver we need to get repaired. The type is ESA-B014CFC-21 and the NO. is B-13004-700. They both are not accurate so we were wondering if we can send them to you guys and have the calibrated. Please give me a call back or shoot me an email and hopefully we can figure …Purchase or Repair:

➡️ Reply

#NSK by Olaf Rekman on 2010-03-24 16:51

Dear sir,I am looking for a new or rebuilded NSK driver TYPE EMB014AF-2-05Please let me know.Regards - Olaf

—> Purchase or Repair:

➡️ Reply

#NSK by Todd Havinga on 2008-02-21 21:30

Is there a reason why we have to constantly recalibrate the Home position on these drives, We are usins the ESA-Y3040T25-21

—> Purchase or Repair:

➡️ Reply

#NSK by Des on 2014-05-03 07:20

Hello, I am interested in purchasing the NSK ESA 4-34018-700 Drive. I am looking to source one quickly and wanted to inquire about pricing and availability. Thank you!

—> Purchase or Repair:

➡️ Reply

#NSK by Henri on 2014-01-05 10:53

Hello, I'm in the purchasing department and a colleague needs a replacement for an NSK ESA 4-65006-700 Drive. We can't locate one. Could you provide repair information? Thanks!

—> Purchase or Repair:

➡️ Reply

#NSK by ANIL KUMAR P on 2008-08-21 09:05

Dear sir Please send english vertion manual of K20093-01-01 . PDF manual belongs to NSK servo drive model no. = ‚d‚w‚d‚`‚P|‚O‚O‚P‚O‚`‚O‚O|‚O‚RRegardsAnil

—> Purchase or Repair:

➡️ Reply

#NSK by SABINUS on 2025-05-23 13:43

Hello, do you have an NSK ESA-B014CFD-21 driver available for sale or repair? Need it urgently for production. Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Vacev on 2014-12-27 00:06

Could you please provide me with information on pricing and availability for the NSK ESA 4-65006-700 Drive? I am interested in sourcing one quickly. Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Tom on 2007-03-03 02:20

Can you repair a ESLZ10CF1-01 drive and what is the turn around time? We have been sending these to another repair facility but we get about 20% of them back saying unable to repair. Can you help us ?ThanksTom

—> Purchase or Repair:

➡️ Reply

#NSK by Dave Allen on 2009-01-19 14:09

We have a problem with ALL of our Tacumi toolchanger magazine carousels, when the magazine 1st homes the position is ALWAYS different.This is the SAME problem on EVERY machine.They all use the same NSK drive and motor.Drive type: ESA-Y3040T25-21 Motor type: YS3040FN501, No. 3Y31019Can you offer ANY …Purchase or Repair:

➡️ Reply

#NSK by Anand on 2009-06-27 11:07

Dear repair center,We need to repairing NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!Warm regardsAnand

—> Purchase or Repair:

➡️ Reply

#NSK by Andy on 2007-10-08 13:13

I from Russia.We do not have service NSK.I have read through the message I wish to ask. Service a manual is necessary to me.At me has deteriorated ESK-Y4080FT1-20 the driver.The ballast resistor 200 Ohms and the field transistor 2SK2662 burns down.I want the scheme or consultation.—> …Purchase or Repair:

➡️ Reply

#NSK by Brian Tam on 2007-05-21 22:40

Hi :we need repair some parts NSK servodrive or servo motor Do you have NSK E043SAPA1-002 for sale..

—> Purchase or Repair:

➡️ Reply

#NSK by Cheol Min Part on 2009-06-25 14:17

Dear Sir.I wonder whether you can fix this driver or not.(M-ELC-JG014VF1)If you can, let me know estimates and delivery time.If you need picture, I\'ll send you some pictures.Thanks.

—> Purchase or Repair:

➡️ Reply

#NSK by Rodolfo Vargas Santamaria on 2009-09-04 19:07

I have Motor Drive Type ESA-0810A35-21.1 NO. 0812484This device sent to display the code letter P - 1 and put the power light yellow color.My question is what is this code

—> Purchase or Repair:

➡️ Reply

#NSK by TOMAS MARIN on 2010-07-02 23:25

I GOT A PROBLEM BUT I DONT KNOW WHERE COULD BE IF IN MOTOR OR IN DRIVE MY DRIVE IS AN NSK ESA Y3040TF120 AND THE MOTOR THE FAULT ON THE DRIVE IS F-1 AND A- 4 AND THE MAIN PROBLEM IS ON THE TOURRET INDEXING SO I CAN NOT SEE ON DYSPLAY THE NUMBER OF THE TOOL

—> Purchase or Repair:

➡️ Reply

#NSK by Andy on 2012-11-29 23:34

I can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive? Thanks for any Ideas. Andy

—> Purchase or Repair:

➡️ Reply

#NSK by Animesh on 2008-09-25 15:52

I have got a problem that the servo motor is getting fault.How could I repair when I get P1,P2 such kind of warning.

—> Purchase or Repair:

➡️ Reply

#NSK by Sergio Rodriguez on 2012-06-14 22:38

NSK Servo Drive Repair Model: EM1010A15-05 We have a NSK Servo Drive in bad conditions, when we turn on the machine light leds.I appreciate your comments, in case that you can to repair my servo drive.Best Regards Sergio Rodriguez Plant chiefProduction DepartmentAv. Los pinos #7 A Col. Los pinosGuad…Purchase or Repair:

➡️ Reply

#NSK by Chansac on 2014-02-13 07:58

NSK ESA 4-34018-700 is showing error code E403 and not responding. Need urgent assistance to troubleshoot and restore operation.

—> Purchase or Repair:

➡️ Reply

#NSK by yasser on 2009-12-05 13:34

good evening .i hope all stuff ok. plz i have proplem, in my netestal machine about robot moving hand .this problem come from servo drive give me error f4 and i read in book its friom emergency switch but i check all emergency ok. i try another drive it work and give letter C but problem difference …Purchase or Repair:

➡️ Reply

#NSK by Schwaertzel on 2014-04-14 20:32

NSK ESA 4-65006-700 drive is malfunctioning, halting the production line. Urgent repair service needed to fix the issue immediately.

—> Purchase or Repair:

➡️ Reply

#NSK by elyamini on 2014-12-22 20:44

Hello, I am interested in purchasing the NSK ESA 4-65006-700 Drive unit. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Scott Boynton on 2008-04-14 22:16

Hello, I have a NSK ESA Y2020 drive that appears a blown optoisolator on the quadrature encoder output. The A, B, B*, Z and Z* channels work normaly, with a zero to five volt throw, but the A* channel only has about a half volt thow. Of course this is preventing it from working properly. Can you off…Purchase or Repair:

➡️ Reply

#NSK by Alex Cheong on 2012-02-17 04:24

Dear Sir,We are trading company located in Malaysia looking for the possibility to repairing several type of OEM NSK DD motor and Driver as below,DD Motor type,1) M-JSB015FA503DD motor Drivers,2) M-ESA-D017-CF13) ESA-JB015CF3-204) M-EDC-PS3015CB5F5-01Kindly advise the possibility, prices, lead time,…Purchase or Repair:

➡️ Reply

#NSK by Francesco Baldassa on 2010-09-17 09:10

Hello ,we need repair some parts NSK servodrive have you an office or desk manager in italy ?best regards Mr Francesco Baldassa

—> Purchase or Repair:

➡️ Reply

#NSK by ZIJLMANS on 2014-05-01 17:20

The NSK ESA 4-34018-700 drive is displaying Error Code E567. Equipment is not responding and motor is making a loud grinding noise. Urgent issue, please advise on next steps.

—> Purchase or Repair:

➡️ Reply

#NSK by Eric Ronnebaum on 2015-10-28 15:15

Dear sales I need a repair on a nsk RW1410FN523 motor. My customer is stating it making loader then normal noises and it harder to rotated by hand. The NSK amplifier is M-EP1410A15-05We would like to have a estimate if possible to go through it. I don\'t know if this is possible without looking at t…Purchase or Repair:

➡️ Reply

#NSK by Gilberto Saraiva on 2008-03-14 00:18

Good Morning:I need the manual of servo drive EM0608A05-05 NSK. Could you help-me please?.Thanks a lot

—> Purchase or Repair:

➡️ Reply

#NSK by dao on 2023-09-30 00:00

The Nsk esa-j1003af2-11 ESA Servo Drive is malfunctioning, causing a production line downtime. Urgent repair is needed to restore operations

—> Purchase or Repair:

➡️ Reply

#NSK by Marleen Schepens on 2014-08-10 09:10

Looking for a technician to repair my NSK ESA 4-34018-700 industrial drive unit. It's currently not powering on and is affecting production. Need urgent assistance to get it back up and running. Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Kohlbrenner Chris on 2008-02-11 08:31

Hello, we have a Problem with an NSK \"ESA Y2020 TF6-20\", No: 2-05407-700. It shows \"F 4\" on the Display and we don\'t know, what that means. Please send us an Answer as soon as possible.Please send us also a list of every possible Alarm, which could be shown on the Display.The Adress is above, p…Purchase or Repair:

➡️ Reply

#NSK by Jesus Escobedo on 2009-10-02 17:52

We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,Jesús EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuada…Purchase or Repair:

➡️ Reply

#NSK by NormanLew on 2022-03-02 05:25

Hello. And Bye.

—> Purchase or Repair:

➡️ Reply

#NSK by KUMARADEVAN SANTANADEWAN on 2009-06-08 10:55

I have one unit of NSK motor controller model NSK AMD EXC3 for repair.I would like to have advice, the frequent faulty of this module during production. Most of the fauly is burn IC of M1050 at Y and X- axis motor. Pls advice!

—> Purchase or Repair:

➡️ Reply

#NSK by Pelc on 2014-12-28 15:06

Hello, I'm reaching out on behalf of a client who has an NSK ESA 4-65006-700 Drive that needs repair. Can you please provide information on how we can proceed with the repair process and obtain a quote? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Singletary on 2014-12-05 00:23

Do you have an NSK ESA 4-65006-700 drive available for sale or repair? Need it urgently to keep production running smoothly. Thank you.

—> Purchase or Repair:

➡️ Reply

NSK Service & Repair Forum

Reply🗨️Ask a New Question Below❓

Recent 96 Comments

Contact Us

🚑Shop Location🛠️

📞Phone

📦Mailing Address🚛