Atlas Copco Service & Repair Forum

Dear Sir,Atlas Copco is an excellent Compressor with inbuilt dryer, but we have a problem in starting up the system as it went to remote control in electronikon controller and since we do not have manual of this compressor with us, we need your assistance to start this compressor and kindly send us the complete manual (We purchased this GA30 old compressor from UK)

—> Purchase or Repair: Ticket Image

— Posted by K.MAGESH on 2007-10-26

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Atlas Copco"

If you need your Atlas Copco unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 1316 Comments

#Atlas Copco by Abdussamad on 2012-03-15 19:22
hello, our atlas copco G15 installed in Tebisti oil field does not start, there was the temperature lamp on but I fixed this problem, I connected the temperature sensor a jumper but though it does not start, and there was the oil level lamp on too but it is gone now, this atlas copco driving me craz…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Atlas Copco by Michael on 2011-08-04 04:27
I have a GA10. 1998 model. The elektronikon board has a fault code 102 on the board. What does this mean as the machine will not run.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by mourad on 2016-09-13 09:40
J\'ai deux compresseur atlas copco GA 75 FF + ET j\'ai besoin du schéma electrique pour COMPRESSEUR GA 75 FF+

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Ahmad Ridwan on 2010-03-30 01:18
Dear Sir/MadamI have Atlas Copco GA55 compressor. Now Elektronikon Master Control doesn\'t display anything except 100400000000. The compressor cannot be started for operational. PN : 1900070106SN : 0005054400001 What\'s wrong with the Control? Please Give me information. Thank You—> …Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Atlas Copco by Clint Turoldo on 2011-10-05 21:05
Hi there, our Atlas Copco Elektronikon II controller has stopped working, and we can't seem to find a replacement. Can you provide repair information or recommend a repair shop? We need a quick solution. Thanks!

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Dejan Cvetkovic on 2011-11-21 14:08
Dear sirs,We have Atlas Copco compressors:GA37 PNA 510756GA55GA75GA75ff-PNA 510744Please on the last one differential pressure exceed 4bar in LOAD regime and become***** till unload phase when falling to 0,8 Bars.Service suppose to have changed month ago Oil separator filters.Is it possible that sep…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Atlas Copco by Lucio Roman on 2010-11-06 12:05
GA 160-10A

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Zenda on 2013-08-16 06:32
Experiencing issues with Elektronikon 1900070008 control panel on an Atlas Copco screw compressor, looking for repair services. Unit failing to power up, no display showing despite power supply being functional. Any leads appreciated.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by waleed ALKHATEEB on 2010-04-30 12:14
DEAR SIR I am working in JORDAN PHOSPHATE COMPANY JPMC We used GA-90.compressor year of manuf. in 2001 Now, we have a problem on the Elektronikon Control Module we have massage error 104 system fault we don\'t have document \" manual of Electronikon\". You can hepl me, send for me document.and help …Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Atlas Copco by George Lupascu on 2012-09-12 11:30
Hi Sir,I would like to know if you repair MLVA head for Noritsu QSS 2901 I will appreciate your soonest reply.Thank You. All the best George

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by RAMP PRAKASH RAI on 2012-01-16 12:07
It is a efficent stationary air compressor with good control, in my section it is installed at at FTA crane.Please send me the trouble shoot manual for Elektronic-I controller with fault diagnostic

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by cicero campos on 2017-07-14 14:04
I have a controller 1900 0701 24, it is with an alarm 110200000000, I would like to know the following from alarm.thanks in advance.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by dany on 2010-10-01 08:29
Hello, I am contacting you on behalf of a client who is experiencing issues with an Atlas Copco Elektronikon with the part number 1900070124. The device is a controller, and they are seeking assistance with troubleshooting and repair. Could you please provide details on the services you offer for th…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Atlas Copco by Ian Graves on 2007-06-29 07:29
HiCan you help??GA18 - 1998 message is system failure 104 what this mean? and how do we rectify the problem. At 1st error code 11 came up but now just the 104 message is shown.Can you help??RegardsIan

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by agus fiantony on 2011-02-24 16:03
we have compresor atlas copco GA37FF++and not available manual book with catalog sparepartplease thank you

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by mohammed gomaa on 2015-09-17 21:31
it is good commpressor

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by hadi shahbazi on 2010-10-21 11:21
hellowe have a ga55 atlas copco compressor with electronicon controller.on the display appear 100300000000 .please help us thanks

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Scott Fallon on 2007-12-06 16:06
We have an Atlas Copco GA-75 that is about 12 years old. It has an Electronikon Controller that will not reset. Do you do diagonostics, repairs, replacements, etc.??

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by sahaya bosco on 2011-01-19 15:17
GA37 make compressor running time convertor failure fault came also comprerssor totally tripped, why this fault came and how to rectify that fault?

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Wyngarden on 2015-03-08 16:13
Atlas Copco Elektronikon II 1900071012 displaying error code E-XXXX. Compressor not starting up, only showing "No Load" status. Urgent assistance needed to resolve issue.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by kevin schofield on 2014-12-10 21:24
Please send the operation manual for the ElektroniconII on our 2006 compressor. type GA11VSDNr AP1160620I am in need of the manual for the Elektronikon II only.Thank you,kevi schofield

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by charles camilleri on 2010-02-23 16:09
do you repair modules is for a mercedes it on the drivers door it works all the conrols on the drivers side door panel if you do repair have you please got idea of cost thanks

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by TOMMY LIKUBO on 2008-01-15 14:35
The Atlas Copco 1900 0701 02 unit with Elektronikon is not working. Maintenance team needs assistance.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Serdar on 2010-09-20 12:04
Dear Sir/Madam ;we have GA7 and GA7FF Compressors. We need this units\' documents as soon as possible. Please send me GA7 and GA7FF Compressors\' Installation Operation and Maintenance Manuals.Waiting for your reply as soon as possibleBest Regards,Serdar Mechanical Engineer

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by KESAVAN on 2012-02-11 17:30
need this atlas copco compressor ga75 & ga90 (vfd) electrical drawing.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Gary Wysocki on 2011-06-09 11:05
Atlas Copco Elektronikon II 1900 0710 12 not displaying any data or responding to inputs.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by tamer on 2012-03-18 08:13
electrical connect of atlas copco elektronikon 1900 0701 04 ,ga50 vsd

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Atul Kanakdande on 2011-01-04 08:48
i need engineering manual of Electronikon controller.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Orobona on 2014-10-31 07:57
Atlas Copco Elektronikon II 1900071011 control module is displaying error code E-XXXX and machine is not turning on.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by lahcene meskine on 2013-02-28 12:50
Dear Sirs,I need technical manual(s) of Elektronikon P/N:1900070122 or 1900070125.Thanks for your attention

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Gianni on 2008-02-22 14:01
the number of module is not correct,or obsolete,pleas seriel number compressor,only this I can help yuo!I have a connect whith atlas copco

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by v.saravanan on 2013-12-24 09:30
sir, we are using the GA37 KW VFD system , so at mean time alaram falut is convert time out, so what is the problem, so u can suggest the remedies is earliear,thanking you,v.saravanan+919940850119

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by nikhil on 2011-02-14 16:22
we r using atlas copco compressor from last 10 years.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Hoang Thanh Tung on 2011-08-12 03:29
Dear Sir/Madam ;we are using yours GA7FF Compressors. We need this units\' documents as soon as possible. Please send me GA7FF Compressors\' Installation Operation and Maintenance Manuals.Thanks and best regard.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by ahmed aly on 2009-06-29 14:16
Dear Sir,I would like to request the technical detailed catalogue for your compressor type GA5 FF S/N: AII 158303 as we need the technical catalogue for it (including troubleshooting procedures) thank youAhmed A. Aly | Chief EngineerIHG Port Ghalib | PO Box 23, Port Ghalib, Marsa Alam, Red Sea, Egyp…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Atlas Copco by ruban on 2011-08-01 20:16
we have ga 15 atlas compresser. please sent a service manual.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Muhammad Sadiq on 2008-10-28 10:20
Dear Sir,Kindly Sand Atlas Copco Compressors model no GA7 Maintenance Manual for Spair Parts indenting purpose etc.My Plant name is Riyadh Cement & co.thanks.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by BENJAMIN EDEN on 2013-04-03 07:31
The Atlas Copco Elektronikon 1900070008 control panel for one of our screw compressors malfunctioned earlier today, causing unexpected downtime. I need a quick answer before the next shift starts. Any insights would be greatly appreciated.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by MUHAMMAD JAMIL AKHTER on 2010-07-09 14:58
COULD U PLEASE SEND ELECTRIC DIAGRAM OF GA75 ATLAS COPCO AIR COMPRESSOR FOR REPAIRING AND MAINTENANCE

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Gert Smith on 2010-01-02 10:28
We have the same problem. Can not use any key on the keyboard. Can not reset any alarms or use the uo and down keys. The display shows temperature element outut. The setting is 120 DegC and the real vakue is 36 DegC. The alarm led and the power led is flashing.Please help.Gert

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by v.saravanan on 2013-12-24 09:23
sir, we want the electrical drawing for GA37KW VFD COMPRESSOR , so u pls send the drawing is earliear,

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Holtmeyer on 2010-09-01 08:31
I'm experiencing issues with my Atlas Copco Electronikon 1900059812 controller and need assistance to fix it. Looking for a technician who specializes in industrial unit repairs.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by nguyen tan vu on 2010-09-19 06:33
I want you company sen to you diagram elektronikon because my machine have problem.i hope you help me to do that thank you

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by benmerkhi on 2011-02-11 06:48
Please send us the regulator electric wiring diabgram of GA75.Kind regards

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by sidy sarr on 2022-02-21 15:25
Bonjour mon compresseur atlas copco ne demarre pas quand je le met sous tension il affice une defaut 110300000000. veuillez m'informer de la signification de cette alarme (110300000000) et comment supprimer

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by m asghar77s on 2010-11-30 10:01
Dear Sir,We are using our stanter machine, a three nos. of your GA75air compressors for air delivery to our plants equipment.I have face more difficulties due to without trouble shooting user manual of klektronikon regulator. COPCO part no 1900-0700-03 CONTROL MODULE the it show passward plz tell me…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Atlas Copco by Nathaniel Edeoghon on 2009-09-11 15:49
my Elektronikon II regulator for FD410A dryer Serial number APF138783is shut down alarm that has refuse to reset.the alarm is PDP not normal and sensor fault.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Ghulam Mustafa on 2010-03-31 06:13
I want to request user manual elektronikon II panel control of air compressor model GA30 VSD FF.thanks & Pls, feedback to me as soon as.Thanks and best regards.

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Nitis Pooasa on 2009-12-16 09:56
my electronikon could not display the charactor

—> Purchase or Repair:
➡️ Reply
#Atlas Copco by Daniel Goarnisson on 2011-08-28 11:02
Please, can you send me the spare parts and maintenance manuals for compressors Atlas copco Type GA 75 P, S/N AP1610227 to 229. Thanks and best regardsDaniel

—> Purchase or Repair:
➡️ Reply

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.