Elto Electronic Timer Manual :: Industrial Electronic Repair

Links Menu

  Home
About Us
Repair Lab
Job Opportunities
Customer Feedback
Manufacture's Repaired
Forum
Credit Application Fair Estimate Credit Application
Repair Service Form
1-336-773-9665

Get Repair Pricing

 
Manufacture:

Part #:

 

Contact Menu

  Email Sales
Email Shop
Email Parts
Contact Info
1-336-773-9665

Recent Units in for Repair


  
Elto Electronic Timer Manual

  Posted by rikki on Friday, May 23 2008

OPERATING INSTRUCTIONS – ELTO ELECTRONIC TIMER MANUAL

Please read the following instructions carefully before connecting this timer to electrical appliances.
IMPORTANT
Don’t plug in an appliance where the load exceeds 10 Amp. Always ensure the plug of any appliance is fully inserted into the timer outlet. If cleaning of the timer is required. Remove from mains power and wiper timer with a dry cloth.

Do not immerse timer in water or any other liquid.

Heaters and similar appliances should never be left unattended during operation. The manufacturer recommends such appliances not be connected to timers.

KEYBOARD DEFINITION
1. MASTER CLEAR; Clear all data in memory including current time and all programs.
2. UP: Set current time combined with buttons UP, DOWN: set programs combined with buttons SET, DOWN; Set CD combined with buttons SET, DOWN: Press UP and DOWN buttons simultaneously to enter CLOCK mode under PROGRAM setting mode or CD setting mode.
3. SET; Set current time combined with buttons UP, DOWN; Set programs combined with buttons UP, DOWN; Set CD combined with buttons UP, DOWN.
4. DOWN; Set current time combined with buttons SET,UP: Set programs combined with buttons SET,UP; Set CD combined with buttons SET,UP.
5. RANDOM; Set or cancel RANDOM function.
6. CD (COUNT DOWN); Set or cancel CD function.
7. MANUAL; Select operating modes (ON,AUTO,OFF) of timer; Override programs or recall the overridden programs in setting programs.
GENERAL FEATURES
1. 10 ON/OFF programs with 1 minute sleep
2. MANUAL ON/AUTO/MANUAL OFF selectable.
3. 12/24 hour mode selectable.
4. LCD display with second.
5. Summer time function available
6. Random function with a random advance of 10-31 minutes between 6:00 PM and 6:00 AM.
7. 16 combinations of day or blocks of days available as follows:
MO
TU
WE
TH
FR
SA
SU
MO, TU, WE, TH, FR, SA, SU
MO, TU, WE, TH, FR
SA, SU
MO, TU, WE, TH, FR, SA
MO, WE, FR
TU, TH, SA
MO, TU, WE
TH, FR, SA
MO, WE, FR, SU
8. Maximum of 99 hours 59 minutes 59 seconds CD (COUNT DOWN) function.
INITIAL OPERATION
1 Plug timer into a regular 250 Volts power outlet and turn the power on. Leave for approximately 14 hours to charge the memory back up battery.
2 Clear all current information by pressing MASTER CLEAR button with sharp object such as a pen or pencil after charging.
3 The timer is now ready to be setup for use.
SETTING CURRENT TIME
Press UP button or DOWN button until CLOCK displays in LCD.
2. Press SET button 2 seconds at least, the SET will display in LCD and flash. The WEEK DAY will flash at the same time the time change to SET mode you can set the current time now.
3. Press UP button or DOWN button to set the WEEK DAY.
4. Press SET button once time and release the HOUR will flash the WEEK DAY will stop flashing and keep display.
5. Press UP and DOWN button to set the HOUR.
6. Press SET button once time and release the MINUTE will flash the HOUR will stop flashing and keep display.
7. Press UP button or DOWN button to set the MINUTE.
8. Press SET button once time and release, the time change to CLOCK mode.
9. To reset incorrect time, repeat above steps.
SETTING PROGRAMS
TIP: When verifying your programs ensure that the settings do not overlap, especially when using the block option. If there are program settings overlapping, the timer ON or OFF will be executed according to the program time, not by program number. Program OFF has the priority over program ON. Please verify the timers operation mode if you want to arm the programs the timer must be in AUTO mode and the RANDOM and CD function must be cancelled.
1. Press UP button or DOWN button until LCD shows ON_1. The first ON setting can be made now.
2. Press SET button once and release the SET will display in LCD and flash. The WEEK DAY will flash at the same time.
3. Press UP button or DOWN button to set the WEEK DAY.
4. Press SET button once time and release the HOUR will flash the WEEK DAY will stop flashing and keep display.
5. Press UP button or DOWN button to set the HOUR.
6. Press SET button once time and release. The MINUTE will flash the HOUR will stop flashing and keep display.
7. Press UP button or DOWN button to set the MINUTE.

EXAMPLE; Timer ON at 17.15 and OFF at 22.30 everyday.
a. Press UP button or DOWN button until LCD shows ON_1.
b. Press SET button once and release the SET will display in LCD and flash the WEEK DAY will flash at the same time.
c. Press UP button or DOWN button till the LCD displays MO,TU,WE,TH,FR,SA,SU.
d. Press SET button once time and release The HOUR will flash the WEEKDAY will stop flashing and keep display.
e. Press UP button or DOWN button till LCD displays 5:00PM or 17:00.
f. Press SET button once time and release. The MINUTE will flash. The HOUR will stop flashing and keep display.
g. Press UP button or DOWN button till LCD displays 5:15PM or 17:15.
h. Press UP button once and release. LCD displays OFF_1.
i. Repeat the above b,c,d,e,f and g till LCD displays 10:30PM or 22:30.
j. Press MANUAL button till LCD displays AUTO.

MANUAL ON/AUTO/MANUAL OFF SETTINGS
Operating modes cant be changed during program settings.
1. Press MANUAL button to revert the three modes in turn.
2. The programs can only be executed in AUTO mode. When AUTO is selected, the timer operates as the programs. In MANUAL ON or MANUAL OFF mode all programs are ignored and the timer doesn’t operate. When MANUAL ON mode is selected power output is permanently off.
3. When the mode is turned from MANUAL ON to AUTO, the timer will keep the setting on MANUAL ON until to the next timer setting.

RANDOM FUNCTION
1. Press RANDOM button. LCD displays R(RANDOM). RANDOM function is activated.
2. When this function in ON, the settings will be executed with a random advance of 10-31 minutes between 6:00PM and 6:00am.
3. Press the RANDOM button once again to cancel this function. RANDOM function cant be set during PROGRAM an CD setting.
4. The RANDOM function can only be executed in AUTO mode between 6:00PM and 6:00AM
CD (COUNT DOWN) FUNCTION
1. Press UP button or DOWN button until LCD shows CD, you cant set the CD time now.
2. Press SET button once and release the set will display in LCD and flash, The ON or OFF will flash at the same time.
3. Press UP button or DOWN button set ON or OFF mode which you want.
4. Press SET button once and release the HOUR will flash the ON or OFF will stop flashing and keep display.
5. Press UP button or DOWN button to set the HOUR.
6. Press SET button once and release the MINUTE will flash the HOUR will stop flashing and keep display.
7. Press UP button or DOWN button to set the MINUTE.
8. Press SET button once and release the SECOND will flash the MINUTE will stop flashing and keep display.
9. Press UP button or DOWN button to set the SECOND. Press SET button the SECOND will stop flashing and keep display.
10. Press CD button the COUNT DOWN time will reduce with one second if the current operation mode is in AUTO mode.
11. Press CD button once again the COUNT DOWN time will stop and comeback the primary COUNT DOWN time.
12. Maximum COUNT DOWN time is 99 hours 59 minutes 59 seconds.
13. The CD function can only be executed in AUTO mode and the RANDOM function must be cancelled.
14. The CD will flash in LCD when press CD button in clock mode it means the CD function is executed.

12/24 HOUR MODE
Press CD button and SET button simultaneously to turn the time display between 12 and 24 hour mode.
SUMMERTIME FUNCTION
1. Press MANUAL button and SET (or RANDOM) button simultaneously LCD shows S(summertime). Clock advances 1 hour.
2. To revert to winter setting, press the two buttons again. Clock moves backward 1 hour. S disappears in LCD.
OPERATION GRADUATION
Please notice the operation graduation when you set the timer it will operate as follows graduation;
1 MANUAL ON OR MANUAL OFF – 2 RANDOM – 3 CD – 4 PROGRAM –
It executes the MANUAL ON OR MANUAL OFF setting first, RANDOM setting second, CD setting third and PROGRAM setting last when the timer runs. Please set the right operation mode.






  Current thread:

Elto back up battery
  back up batter
elto timer
Tajima IC5102000000 Console1 Card

View Parent Message

Return Home
to Elto


Need to get your
Elto Repaired?
Quickly Hire our Service Dept
to do the work for you!

Credit Application Form
Fair Estimate


Contact Sales

1-336-773-9665

Reply to the Message Below!
OLD Topic: Elto Electronic Timer Manual
Your name:
Valid Email Address Required:
Your Location:
Subject:
No HTML tags allowed!
Elto:
Forum for Industrial and Commercial Customers



A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  
Disclaimer: This website is not sanctioned or approved by any manufacturer listed.
"Industrial Electronic Recycling" is not an authorized distributor or representative
for the listed manufacturers or tradenames.

Home
Repair Lab
Manufactures Repaired
Manufactures List
Onsite Field Repair
Electronic Repair in the News
CNC Monitor Repair Lab
Get Quote
Job Opportunities
Proud to NOT be a
BBB Accredited Business!
BBB
BBB Pay for play scheme
BBB Running a Racketeering Scam
BBB A For-Profit Extortion Group



Hosted by

Christ Servers
Christian Web Hosting




Powered by IERNC Content Management System CMS 1.1 2006
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
1-336-773-9665
New Server