Procond Elettronica Service & Repair Forum

My dishwasher Ariston LSI 61 E has broken down.Please How Much cost the board sended to Italy in caserta.Thanks

—> Purchase or Repair: Ticket Image

— Posted by Pasquale Martusciello on 2008-03-25

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 569 Comments

#Procond Elettronica by Uwe Jungbauer on 2007-05-21 09:30
Dear Sir In our Electrolux dishwasher W60, we have the printed circut, typ: 356083206. My question is, if we can get this part checked in Hungary or in Austria?With regardsUwe Jungbauer

—> Purchase or Repair:
#Procond Elettronica by Numambsurka on 2006-06-22 13:34
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Immediate repair service is needed to restore the line's operation swiftly.

—> Purchase or Repair:
#Procond Elettronica by Peter CHE NGWA on 2013-05-16 16:54
Could you please confirm if the Procond Elettronica 356033305 47-90 is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:
#Procond Elettronica by PAUL MITCHELL on 2007-10-05 15:57
HI THERE COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 411122430 OUT OF A ZANNUSI WASHING MACHINE.MANY REGARDS PAUL.

—> Purchase or Repair:
#Procond Elettronica by Kunasegar on 2007-03-22 09:51
I'm currently experiencing issues with the Procond Elettronica MC-70 124438 treadmill controller. It seems like something has stopped working, but I'm not exactly sure what the problem is. Any assistance you can provide would be greatly appreciated.

—> Purchase or Repair:
#Procond Elettronica by Ron Ledwell on 2011-07-29 17:27
NTE Part #\'s NTE145A and NTE5137A (about $2 each at a local Electronis Suppy Store. Fixed my Problem.

—> Purchase or Repair:
#Procond Elettronica by Jacques Erades on 2013-01-17 02:17
Would be glad if you couldt help me with a schematic diagram for my ESAM4200.Cod.Procond: 454010272Cod.De Longhi: 5232121200Wk: 49/08 Op:0043 SW:7.2For your effort many thks in advanceWith kind regardsJacques Erades

—> Purchase or Repair:
NEED BOARD MACHINE INSTALLED IN A CARRIER AIR CONDITIONER BRAND MODEL:GE ELECTRONIC PROCOND 356,068,908.YOU CAN DELIVER IN THE U.S. EVEN VIA FEDEX?OUR CUSTOMER WILL BE IN THE USA next week.PLS WAIT RETURN.CLÓVIS HIROSHI KUNII

—> Purchase or Repair:
Tengo una cafetera de Nespresso el cual tiene dos tarjetas:Procond Electtronica #3560102109Procond Electtronica #3560102059Desearia informacion que me puede ayudar, ya que controla el cafe, pero no la leche.Espero que me ayude e informe de los costos por reparacion .

—> Purchase or Repair:
HI ThereI need a schematic over the above PCB. It is siiting in a Atlas NFS242 frezer

—> Purchase or Repair:
#Procond Elettronica by julien on 2018-10-27 12:59
I need to replace (or repair) the electeonic card of my dryer Faure. The Start button donnot work any more.Thanks,Michel Julien

—> Purchase or Repair:
#Procond Elettronica by davor prizmic on 2009-11-03 10:34
To whom it may be concern!please advice me as soon as possible if any opportunity exist for buying356084601 Circuit Board for Ariston LSI62 dishwash machine.I will pay by bank or by amEX OR VISA.Pls give me some advice or help me in any way-pls include all charges for shipping.—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Chansac on 2016-03-03 16:41
BonjourJe recherche le schéma pour une platine Procond électronica 356O1029 montée sur un réfrigérateur Brandt 1153HBien à vous

—> Purchase or Repair:
#Procond Elettronica by RAMIRO VEGA H on 2007-08-21 20:18
Do you have a Procond Elettronica MC-70 124438 treadmill controller available for sale or repair? Urgent for production needs.

—> Purchase or Repair:
#Procond Elettronica by Jeff Haag on 2006-06-16 02:00
I believe my MC-70 controller board may be bad. Do you repair these boards? Is this board manufactured by Procond Elettronica?Thanks.

—> Purchase or Repair:
#Procond Elettronica by DOENLEN on 2009-07-05 09:32
BONJOUR,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 356066303-FOR SIEMENS REFRIGERATOR REF KI24L451FF/01?BEST REGARDSGUY DOENLEN

—> Purchase or Repair:
#Procond Elettronica by Jaro Laine on 2007-02-08 20:32
I'm following up again regarding my Procond Elettronica MC-70 124438 treadmill controller issue. It's still not working. I need assistance with this as soon as possible.

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, affecting the production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#Procond Elettronica by Nathalal on 2007-06-01 08:50
Looking for repair for Procond Elettronica MC-70, treadmill controller unit not functioning. Need assistance from qualified technician for industrial equipment repair.

—> Purchase or Repair:
#Procond Elettronica by ramon on 2010-08-05 13:18
Hola, esta maquina con nº prod. 914602703-00 no hace el programa de secado, cuando acaba de lavar activa un relé gira el tambor unas vueltas y para, no llega tension al motor de secado ni a la resistencia.Sospechamos de la placa 451510238 type E.132156823, el Servicio Oficial ha dicho que no hay rec…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Manuel on 2009-05-25 17:30
HelloIm also would like to test this my module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this module*******Waht is the cost for repair? What is the cost for a new one?GE Procond ElettronicaType P. 451510050Type E. 12430392/4SW Ver. W2C01202THAN…Purchase or Repair: Ticket Image...
Show More
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a halt in the production line. Urgent repair service is required to resume operations without further delay.

—> Purchase or Repair:
#Procond Elettronica by Maurice on 2007-06-01 07:50
The Procond Elettronica MC-70 124438 treadmill controller in the warehouse is experiencing unusual behavior - it's not functioning as expected.

—> Purchase or Repair:
#Procond Elettronica by BRIDET on 2013-08-01 17:32
Could you please confirm if the Procond Elettronica 356033305 47-90 circuit board is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:
My dishwasher Ariston LSI 61 E has broken down.Please How Much cost the board sended to Italy in Reggio Calabria.Thanks

—> Purchase or Repair:
#Procond Elettronica by mr m ibrar on 2013-11-25 15:15
The red light is all the time flashing, when the the compressor first comes on it stays on for good 5-10 min and goes to standby and then when it comes back on after a while it stays on for round about 3 min and there about . The supper freeze dose not come on as well, so i will be very great full i…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by I Globerman on 2007-08-15 16:35
Dear team, there was a downtime incident involving the Procond Elettronica MC-70 124438, which is a treadmill controller. The issue occurred earlier today and I need a quick response before the next shift begins. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Dwight Holder on 2006-06-20 22:34
I need DZ-1 and DZ-2 diodes or their values.Or what is the repair cost of this item.Thanks

—> Purchase or Repair:
#Procond Elettronica by Marco Gualengi on 2007-07-19 20:25
Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am trying to source one quickly. Thank you.

—> Purchase or Repair:
#Procond Elettronica by EDDY MEDINA on 2006-03-01 21:15
I have an MC-70 motor controller that is not working from a Reebok ACD2 treadmill and I would like to know how do I get this part repair or replace. Please call me at your earliest convenience at (1917)662-2892 or email me asap. Thanks EDDY MEDINA

—> Purchase or Repair:
#Procond Elettronica by MEYERS on 2006-11-16 05:57
Experiencing issues with Procond Elettronica MC-70 124438 treadmill board. Need a skilled technician to repair an industrial unit immediately. Thank you.

—> Purchase or Repair:
#Procond Elettronica by CHIRPpdm on 2022-01-27 01:09
antiquities. These are the Egyptian papyri

—> Purchase or Repair:
#Procond Elettronica by dan lucas on 2007-10-03 20:27
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning - it is not functioning as usual and is showing erratic behavior.

—> Purchase or Repair:
#Procond Elettronica by John McGeady on 2011-03-09 22:12
think we need a new transformer, which has procond eletrrronica written on itcan you assist ?

—> Purchase or Repair:
#Procond Elettronica by Marlene Duval on 2012-09-09 20:53
Would be glad if you couldt help me with a schematic diagram for my ESAM4200.Cod.Procond: 454010272Cod.De Longhi: 5232121200Wk: 49/08 Op:0043 SW:7.2For your effort many thks in advanceWith kind regardsMarleneDuval

—> Purchase or Repair:
#Procond Elettronica by NAJI on 2006-01-02 23:57
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a production line disruption. Urgent repair service is needed to resolve the issue and resume operations

—> Purchase or Repair:
#Procond Elettronica by kutsal on 2007-03-24 04:38
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Urgent repair service is needed to resolve this issue

—> Purchase or Repair:
#Procond Elettronica by tamgho kevin on 2012-09-13 08:08
j\'ai besoin de savoir combien coute cette carte

—> Purchase or Repair:
#Procond Elettronica by E on 2007-10-05 18:05
the Procond Elettronica MC-70 124438 treadmill board on unit X is malfunctioning. Needs attention ASAP. Please check it out first thing in the morning. Thanks!

—> Purchase or Repair:
#Procond Elettronica by Rohan Navaratnam on 2012-11-06 09:36
0203050000230Ge procond elettronicaProcond 452750010 M1B V1.0.3 1535-0940 18/05Hello there I need this product immediately to my fridge-freezer(make BRANDT)complete component print-plate - sectionhow much it cost totally to send it to Denmark?

—> Purchase or Repair:
HelloI would like to enquire the undermentioned washing machine from the available of a component and the data of technical:Procond Elettronika411 625 431kWith thanks :Gergõ

—> Purchase or Repair:
#Procond Elettronica by Locke on 2005-09-22 23:37
The unit that appears to be causing trouble is the treadmill board within the Procond Elettronica MC-70 124438 equipment. It is behaving unusually and not functioning as it typically does.

—> Purchase or Repair:
#Procond Elettronica by jeff on 2008-06-01 16:13
what are the values? i assume they are zener diodes, since the other diodes are labeled d10, d15, etc without the Z

—> Purchase or Repair:
#Procond Elettronica by paul wasson on 2007-04-21 02:47
The Procond Elettronica MC-70 124438 treadmill controller is not working.

—> Purchase or Repair:
#Procond Elettronica by Howard Karloff on 2009-06-26 03:21
I have two broken Proform MC60 motor controllers. How much wouldit cost to fix them?

—> Purchase or Repair:
#Procond Elettronica by Dorothy on 2007-05-14 19:19
I have a Procond Elettronica MC-70 124438 treadmill controller that needs repair. The treadmill is not responding when turned on. Looking for a qualified technician to fix it as soon as possible.

—> Purchase or Repair:
#Procond Elettronica by Dodds on 2007-09-18 22:05
Do you have a Procond Elettronica MC-70 124438 treadmill controller available for sale? Production is currently down, and we need to get it running again. Thank you.

—> Purchase or Repair:
#Procond Elettronica by nguyentanvu on 2006-06-21 02:34
Procond Elettronica MC-70 124438 treadmill controller experiencing frequent power fluctuations, affecting production line efficiency. Urgent repair service needed to resolve issue

—> Purchase or Repair:
#Procond Elettronica by Ilijanich on 2007-09-01 10:56
The Procond Elettronica MC-70 124438 treadmill controller is displaying error code E2, indicating a motor speed sensor problem.

—> Purchase or Repair:
#Procond Elettronica by Jamie Smith on 2006-12-18 10:04
The Procond Elettronica MC-70 124438 treadmill controller is not functioning properly.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.