NSK Service & Repair Forum

I\'d like to get a manual for nsk that is ESB014CFI-01A.I\'VE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY I\'M NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

—> Purchase or Repair: Ticket Image

— Posted by mansuk hong on 2008-04-09

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "NSK"

If you need your NSK unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 96 Comments

#NSK by Mcguinness on 2014-12-23 15:06
Please provide me with detailed information about the NSK ESA 4-34018-700 Drive. We are looking into the possibility of finding replacement parts or repair options for this unit. Could you please confirm if it is still supported or if any parts are available for it? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#NSK by Mark Proctor on 2007-04-03 10:08
NSK ES3040K23-03 Servo DriveHi, We have an NSK ES3040K23-03 servo drive that requires repair.Do you have a fixed price repair on this unit?Please advise as soon as possible.ThanksMark Proctor

—> Purchase or Repair:
#NSK by Volker Schmidt on 2009-01-07 10:26
We hava some drivers with the PN ESA-BO14CFD-21 or ESA-BO14CF3-11I can communicate over hyper terminal but not all command work, TS, TC, IO0/RB but some commands do not work like TT, MN.Do you have any idear?Thanks for help Volker

—> Purchase or Repair:
#NSK by yasser on 2009-12-05 13:34
good evening .i hope all stuff ok. plz i have proplem, in my netestal machine about robot moving hand .this problem come from servo drive give me error f4 and i read in book its friom emergency switch but i check all emergency ok. i try another drive it work and give letter C but problem difference …Purchase or Repair: Ticket Image...
Show More
#NSK by Marhaeni Tambrin on 2009-05-29 06:06
Dear Sir / MadamWe need repair or buy servo drive M-ESA-Y2020 G23have you an office or desk manager in Indonesia or Singapore ?We will appreciate for your immediately reply.Best Regards,MarhaeniPurchasing of PT. Akeda Multi MediaJl. KH. Moh. Mansyur No. 11 Blok B 8-12Jakarta 10140 - INDONESIA.Telp. …Purchase or Repair: Ticket Image...
Show More
#NSK by Chansac on 2014-02-13 07:58
NSK ESA 4-34018-700 is showing error code E403 and not responding. Need urgent assistance to troubleshoot and restore operation.

—> Purchase or Repair:
#NSK by Anand on 2009-06-27 11:07
Dear repair center,We need to repairing NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!Warm regardsAnand

—> Purchase or Repair:
#NSK by James Park on 2010-10-20 00:24
Hello,We have a upper and lower driver we need to get repaired. The type is ESA-B014CFC-21 and the NO. is B-13004-700. They both are not accurate so we were wondering if we can send them to you guys and have the calibrated. Please give me a call back or shoot me an email and hopefully we can figure …Purchase or Repair: Ticket Image...
Show More
#NSK by mansuk hong on 2008-04-09 05:20
I\'d like to get a manual for nsk that is ESB014CFI-01A.I\'VE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY I\'M NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

—> Purchase or Repair:
#NSK by Rodolfo Vargas Santamaria on 2009-09-04 19:07
I have Motor Drive Type ESA-0810A35-21.1 NO. 0812484This device sent to display the code letter P - 1 and put the power light yellow color.My question is what is this code

—> Purchase or Repair:
#NSK by Tafheem on 2013-04-30 00:00
NSK ESA-Y3008A25-21 power supply unit is not turning on despite being plugged in. Need immediate repair assistance.

—> Purchase or Repair:
#NSK by Singletary on 2014-12-05 00:23
Do you have an NSK ESA 4-65006-700 drive available for sale or repair? Need it urgently to keep production running smoothly. Thank you.

—> Purchase or Repair:
#NSK by Chester Yong on 2010-08-12 09:15
dear sir,I would to check that do you able to repair this NSK driver model: ESA 23?

—> Purchase or Repair:
#NSK by Leo Solomon on 2016-11-15 09:13
Gud DayThe NSK ESA-Y2003A23-21 driver that we have is having a big trouble on its communication , it wont make the motor to initialize, it only goes on one side of initialization and does not goes to its original position, but when we try to manually rotate it using handy controller configuration, i…Purchase or Repair: Ticket Image...
Show More
#NSK by BesterPreisvergleich on 2011-12-04 10:31
Hallo, ich habe eine tolle Seite entdeckt,bei der man einfach den billigsten Preis für allerlei Dinge suchen kann. Hier ist der link Bester Preisvergleich Ach ja, ausserdem findet man dort jede Menge Gutscheine, was natürlich toll ist!.

—> Purchase or Repair:
#NSK by ANIL KUMAR P on 2008-08-21 09:05
Dear sir Please send english vertion manual of K20093-01-01 . PDF manual belongs to NSK servo drive model no. = ‚d‚w‚d‚`‚P|‚O‚O‚P‚O‚`‚O‚O|‚O‚RRegardsAnil

—> Purchase or Repair:
#NSK by Cacho on 2014-09-07 17:20
Hello, we are in urgent need of repair info for our NSK ESA 4-65006-700 Drive. Can you please provide guidance on how we can proceed with fixing this issue? Thank you.

—> Purchase or Repair:
#NSK by azadeh on 2014-05-01 22:20
Hello, our NSK ESA 4-65006-700 drive is down with error code E302. Urgent assistance needed to troubleshoot and resolve the issue. Thank you.

—> Purchase or Repair:
#NSK by dao on 2023-09-30 00:00
The Nsk esa-j1003af2-11 ESA Servo Drive is malfunctioning, causing a production line downtime. Urgent repair is needed to restore operations

—> Purchase or Repair:
#NSK by Behr on 2014-02-16 17:58
The NSK ESA 4-65006-700 unit is not functioning. It is a drive unit.

—> Purchase or Repair:
#NSK by NormanLew on 2022-03-02 05:25
Hello. And Bye.

—> Purchase or Repair:
#NSK by Dave Allen on 2009-01-19 14:09
We have a problem with ALL of our Tacumi toolchanger magazine carousels, when the magazine 1st homes the position is ALWAYS different.This is the SAME problem on EVERY machine.They all use the same NSK drive and motor.Drive type: ESA-Y3040T25-21 Motor type: YS3040FN501, No. 3Y31019Can you offer ANY …Purchase or Repair: Ticket Image...
Show More
#NSK by Andy on 2007-10-08 13:13
I from Russia.We do not have service NSK.I have read through the message I wish to ask. Service a manual is necessary to me.At me has deteriorated ESK-Y4080FT1-20 the driver.The ballast resistor 200 Ohms and the field transistor 2SK2662 burns down.I want the scheme or consultation.—> …Purchase or Repair: Ticket Image...
Show More
#NSK by BIOTECH on 2014-12-03 23:23
Can this NSK ESA 4-65006-700 Drive be repaired or bought? I am looking to check this off my to-do list.

—> Purchase or Repair:
#NSK by MARIO BALANDRAN on 2013-02-06 23:44
we are look9ing for KSK drive EE1010A98-25

—> Purchase or Repair:
#NSK by Doreen Rogers on 2010-11-18 18:01
Hello, I am looking for the following bearing for NSK RW1410FN523 servo motor.The part number is 150DXR007DD / NRXT15025 C8P5 sealed bearing outer race / inner race Is this something you may have available for sale ?

—> Purchase or Repair:
#NSK by SABINUS on 2025-05-23 13:43
Hello, do you have an NSK ESA-B014CFD-21 driver available for sale or repair? Need it urgently for production. Thank you.

—> Purchase or Repair:
#NSK by Andy on 2012-11-29 23:34
I can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive? Thanks for any Ideas. Andy

—> Purchase or Repair:
#NSK by Chitfreerve on 2014-10-31 22:57
The NSK ESA 4-65006-700 drive unit experienced a malfunction earlier today, causing downtime from 130 PM to 300 PM. We need to address this issue

—> Purchase or Repair:
#NSK by Mendieta on 2014-12-17 00:44
Hello, the NSK ESA 4-34018-700 Drive unit is still down. Please provide an update

—> Purchase or Repair:
#NSK by Vishnumurthy on 2010-04-16 14:46
Please send me the PDF for type ESA-B045AF3-21 number B-2X011-700.And also provide the service center name/ details in Bengaluru, Karnataka, India.RegardsVishnumurthy

—> Purchase or Repair:
#NSK by Jesus Escobedo on 2009-10-02 17:48
We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,Jesús EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuada…Purchase or Repair: Ticket Image...
Show More
#NSK by HOVANEC on 2025-06-07 00:25
Can the NSK ESB014CF1-01A drive be repaired or replaced? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#NSK by Moises Tovar on 2008-07-09 14:51
I need a NSK driver part no. EE0608A05-25 SERIE. 065221

—> Purchase or Repair:
#NSK by RAFAEL LOYA on 2008-08-03 19:35
I HAVE A PROBLEM WHIT A SERVO DRIVE AMP ESA_Y3040T25-21, I NEED A CATALOG OF ITEM PLEASE THANKS ALL

—> Purchase or Repair:
#NSK by ScottHug on 2017-10-14 02:46
#NSK by TOMAS MARIN on 2010-07-02 23:25
I GOT A PROBLEM BUT I DONT KNOW WHERE COULD BE IF IN MOTOR OR IN DRIVE MY DRIVE IS AN NSK ESA Y3040TF120 AND THE MOTOR THE FAULT ON THE DRIVE IS F-1 AND A- 4 AND THE MAIN PROBLEM IS ON THE TOURRET INDEXING SO I CAN NOT SEE ON DYSPLAY THE NUMBER OF THE TOOL

—> Purchase or Repair:
#NSK by Mrs Mohan on 2007-05-24 13:41
The above mentioned drive needs repair.

—> Purchase or Repair:
#NSK by edward on 2024-11-06 00:00
NSK ESA-B014CF3-11 servo drive not responding. Production halted. Need immediate assistance to troubleshoot and repair.

—> Purchase or Repair:
#NSK by Schwaertzel on 2014-04-14 20:32
NSK ESA 4-65006-700 drive is malfunctioning, halting the production line. Urgent repair service needed to fix the issue immediately.

—> Purchase or Repair:
#NSK by Jesus Escobedo on 2009-10-02 17:52
We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,Jesús EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuada…Purchase or Repair: Ticket Image...
Show More
#NSK by Mfg on 2014-12-26 03:06
Could you please confirm if the NSK ESA 4-34018-700 is still supported or if replacement parts are available for this drive unit? Thank you.

—> Purchase or Repair:
#NSK by Virgil on 2014-12-28 10:06
NSK ESA 4-65006-700 drive just failed, need urgent attention. Moving to next machine now to continue rounds.

—> Purchase or Repair:
#NSK by Gilberto Saraiva on 2008-03-14 00:18
Good Morning:I need the manual of servo drive EM0608A05-05 NSK. Could you help-me please?.Thanks a lot

—> Purchase or Repair:
#NSK by Alain David on 2014-01-17 15:55
I am a business customer inquiring about repair service for my NSK FMDI 01 MDI Pendant. The unit is not turning on at all, despite multiple attempts to power it up. I have checked the power source and cables, and they seem to be in proper working condition. The estimated replacement cost for a new N…Purchase or Repair: Ticket Image...
Show More
#NSK by DAVID CONTRERAS on 2014-12-06 06:23
The NSK ESA 4-34018-700 drive unit isn't working.

—> Purchase or Repair:
#NSK by Des on 2014-05-03 07:20
Hello, I am interested in purchasing the NSK ESA 4-34018-700 Drive. I am looking to source one quickly and wanted to inquire about pricing and availability. Thank you!

—> Purchase or Repair:
#NSK by Eric Ronnebaum on 2015-10-28 15:15
Dear sales I need a repair on a nsk RW1410FN523 motor. My customer is stating it making loader then normal noises and it harder to rotated by hand. The NSK amplifier is M-EP1410A15-05We would like to have a estimate if possible to go through it. I don\'t know if this is possible without looking at t…Purchase or Repair: Ticket Image...
Show More
#NSK by Animesh on 2008-09-25 15:52
I have got a problem that the servo motor is getting fault.How could I repair when I get P1,P2 such kind of warning.

—> Purchase or Repair:
#NSK by Tom on 2007-03-03 02:20
Can you repair a ESLZ10CF1-01 drive and what is the turn around time? We have been sending these to another repair facility but we get about 20% of them back saying unable to repair. Can you help us ?ThanksTom

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.