Procond Elettronica Service & Repair Forum

I am having trouble with my powertread nordictrack treadmill PT 6.0 and have traced power into the controller. I checked the DC motor by hooking it up to a drill battery and it works fine. What part usually fails on these things? If I need to a replacement, what will it cost? Is it cheaper to send you this part and let you repair it? I noted the DZ1 and DZ4 parts were discolored and replaced them but without any luck. The problem may be in the logic chip. What is the best way to send in the part for repair ?orIf I decide to buy the part, how much would it cost ? Include shipping and handling. Thanks, Keith

—> Purchase or Repair: Ticket Image

— Posted by Keith Haufler on 2006-05-19

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 569 Comments

#Procond Elettronica by Rodriguez. on 2006-11-27 14:20
Please provide an update on the status of the repair for my Procond Elettronica MC-70 124438 treadmill board. It is still not functioning, and I require assistance immediately.

—> Purchase or Repair:
#Procond Elettronica by BOULIANNE on 2007-03-14 01:18
The Procond Elettronica MC-70 124438 treadmill controller in the warehouse is exhibiting abnormal behavior - it is not functioning as usual.

—> Purchase or Repair:
#Procond Elettronica by Sergio Dratwa on 2007-11-13 06:23
Elevation motor is working properly, drive motor does not starts.There are 2 diods that are burn: DZ1 and DZ4 (in between the relay and what look like to be 2 ceramic resistors). There is an overheat area on PCB under these diods, but PCB still OK.Would you sell me just the diods?If not, how should …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by ALEMU on 2006-12-08 15:16
Just had a board failure on Procond Elettronica MC-70 124438 treadmill controller. Will investigate further once this round is done.

—> Purchase or Repair:
Dear, I have a electronic card from a electrolux clothes washer , and i think it out of order.Part number : elettronica GE procond 12430381/6 356084806Could you test it and repair for witch prize ? Thanks for your feed back.Best RegardsO. Boulmier

—> Purchase or Repair:
#Procond Elettronica by Herbert2Caure on 2022-03-02 08:27
Are you an American who is upon looking notwithstanding exigency loans ? Do you think you clout need to drift compete for a accommodation soon? Are you on tap to drop of engaging normal loans that appear along with a tombola of hassle? Whatever your setting is, we are here to skedaddle! We be underg…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Chuck Berls on 2006-11-04 00:22
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a production line disruption. Immediate repair service is needed to restore functionality and resume operations

—> Purchase or Repair:
#Procond Elettronica by freddy on 2009-01-30 03:07
Tengo problema con mi treadmill. aparece en la pantalla E2 lo que no permite que funcione mi treamill. Que debo hacer, por favcor ayudenme.gracias. espero su respuesta

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a production line halt. Immediate repair service needed to resume operations.

—> Purchase or Repair:
Hi,COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 356071101 - LABEL NO 452650111 - FOR Ariston dishwasher LSI 66 A. AND ALSO THE PRICE FOR A TRANSPORTATION TO ITALY.With regards, GIANFRANCO MANUNTA, via M. Macchi 87 - 20124 Milano - ItalyTHANK YOU

—> Purchase or Repair:
#Procond Elettronica by hclm2 on 2006-06-21 08:34
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, affecting the production line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:
#Procond Elettronica by Muller on 2013-10-11 14:42
Hello, we have a Procond Elettronica 356033305 47-90 circuit board that stopped working and we need repair information. Could you please provide guidance as soon as possible? Thank you.

—> Purchase or Repair:
#Procond Elettronica by Glassuth on 2022-02-27 02:48
At the same time, many antique

—> Purchase or Repair:
#Procond Elettronica by Marilyn on 2006-01-03 01:57
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Immediate repair service is needed to get the line moving again swiftly.

—> Purchase or Repair:
#Procond Elettronica by SCHROETTER on 2011-04-01 16:10
Hello,Could you tell me the price for the Procond Elettronica Part no 3560066303 for a congelator SIEMENS .I only need the electronical cart .I am also ready to do a standard exchange if possible . Best RegardsMr SCHROETTER

—> Purchase or Repair:
#Procond Elettronica by de on 2006-06-03 19:22
The Procond Elettronica MC-70 124438 treadmill controller board is malfunctioning, causing a complete stoppage of the production line. Urgent repair service is required to rectify this issue

—> Purchase or Repair:
hi i have a amana stainless steel side by side fridge freezer model XRSS687BB.IM AFTER A CIRCUIT BOARD new,reco,or mine tested onboard it has hv international 451011010 ..122544-01------------------------------------amfel V18.hex B590-------------------------------------------GE PROCOND ELETTRONICA …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by jivat on 2007-03-07 18:14
The treadmill IMAGE 10.6Q has the KEY missing.Can you please provide us the Key or recommendwhere I will be able to get it.Thanks

—> Purchase or Repair:
#Procond Elettronica by feri setiawan on 2009-09-28 04:07
mesin cuci saya klo d nyalakan aliran listrik k mana2(semua body nyetrum).saya kasih tau service center nya daerah mana?

—> Purchase or Repair:
#Procond Elettronica by PAUL MITCHELL on 2007-10-05 15:57
HI THERE COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 411122430 OUT OF A ZANNUSI WASHING MACHINE.MANY REGARDS PAUL.

—> Purchase or Repair:
#Procond Elettronica by Ketan J Bhatt on 2007-02-08 18:32
Hi there, we have a Procond Elettronica MC-70 124438 treadmill controller that needs repair. Can you provide repair information or suggest where we can find a replacement part? Thank you.

—> Purchase or Repair:
#Procond Elettronica by Belmont on 2006-05-29 20:42
The Procond Elettronica MC-70 124438 treadmill controller board is malfunctioning, halting our production line. Urgent repair service required to get operations back on track swiftly.

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Urgent repair service is needed to resolve the issue swiftly.

—> Purchase or Repair:
#Procond Elettronica by Mitch Gryboski on 2006-06-20 00:32
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, disrupting our production line. Urgent repair service is needed to get the line back up and running efficiently. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Abdul Halim on 2007-08-09 14:55
Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am trying to source one quickly. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Geo Suchora on 2006-03-29 01:09
I am a business customer contacting you regarding my Procond Elettronica 356033305 circuit board. The unit seems to be malfunctioning as it is unable to power on or function properly. There are no visible signs of damage or any other external issues that may have caused this problem. I suspect there…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by amin moradi on 2017-06-01 23:37
HiI need schematic of this board Procond Elettronica 3560101029thanks

—> Purchase or Repair:
Bonjour Dže recherche le modul de PROCOND elettronica 3560089039 Pour Un umývat vaisselle FAGOR. pouvez-vous me communiquer le prix de cette pièce? merci

—> Purchase or Repair:
#Procond Elettronica by Gary Diamond on 2012-05-01 06:34
ARE YOU GUYS BUY USED BOARDS PULLED FROM TREADMILLSIF SO HOW MUCH NOT TESTED? OR REPAIRED, UNLESS YOU WANTED THEM REPAIRED

—> Purchase or Repair:
#Procond Elettronica by Ruben Sousa on 2012-12-15 21:17
Hi there.I want to ask if you have this part supply on stock?!The reference is 132400 / 413 26 005.If you do, just tell me how much is the price in total with shipping to Portugal.Thank you very much.

—> Purchase or Repair:
#Procond Elettronica by Orukwo Amaechi on 2012-03-24 09:17
Please get me quote urgently for a Procond Ellectronica capacitor/switch of 0.25 micro farad with part no 411135901 for dish washing machine. We need it to replace the faulty one on our dish washing machine with the following specification:ELX Model: LS9PPN: 9CGX50502215EL: AC 400 V3 N AC 230V/3/50H…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Velazquez on 2009-02-05 19:54
I have some problems with my dishwasher Ariston LSI 66A, it seems the elettronic control does not work 45650110.It\'s possible to buy it on line? How does it cost?

—> Purchase or Repair:
#Procond Elettronica by Eric Tibbits on 2008-01-05 21:41
I have been having problems adjusting the maximum speed potentiometer for my treadmill. I am not an electrical guy. Could you send me a drawing showing the location of this part so I can fix my treadmill. Thanks

—> Purchase or Repair:
#Procond Elettronica by Kazmarcik on 2011-10-25 17:32
Ich benötige eine neue Elektronik

—> Purchase or Repair:
#Procond Elettronica by nguyentanvu on 2006-06-21 02:34
Procond Elettronica MC-70 124438 treadmill controller experiencing frequent power fluctuations, affecting production line efficiency. Urgent repair service needed to resolve issue

—> Purchase or Repair:
#Procond Elettronica by Jim Cox on 2008-08-22 01:18
There is no resistor in R17 and JP1 and JP2 should be jumpered. What value do you have for R57?

—> Purchase or Repair:
#Procond Elettronica by Gisenobby on 2022-01-19 06:19
noclegi augustow bon turystyczny noclegi pracownicze augustow w augustowie www.noclegi-pracownicze-augustow.online stx21

—> Purchase or Repair:
#Procond Elettronica by Marco Garcia on 2007-02-03 04:46
I need schematics for the MC-70 for Proform 985 CD treamill. Where can I get a copy?

—> Purchase or Repair:
#Procond Elettronica by FRANCESCO PARI on 2009-01-14 10:21
Dear Sir In my Ariston dishwasher LSI 41, we have the printed circut, typ: GE Precond Elettronica 356084601. My question is, if i can SEND YOU THIS CIRCUIT TO A CONTROL, CAUSE I DON\'T KNOW IF IT WORKS OR NO, AND HOW MUCH IT COSTS THE CONSIGNMENT + THE JOBWith regardsFRANCESCO

—> Purchase or Repair:
#Procond Elettronica by mahyar on 2006-06-10 20:11
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Urgent repair service needed to restore operation

—> Purchase or Repair:
#Procond Elettronica by Orlando on 2009-04-28 17:53
i need schematic diagram for control board MC-70 AW P/n124438 or

—> Purchase or Repair:
#Procond Elettronica by Foronda on 2007-10-05 17:05
The Procond Elettronica MC-70 124438 is a treadmill controller. It's currently not working and needs attention from the maintenance team.

—> Purchase or Repair:
#Procond Elettronica by Stan may on 2007-04-04 19:56
Hello, I'm interested in the Procond Elettronica MC-70 124438 treadmill board. Could you please provide information on pricing and availability? I'm hoping to source one quickly. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Seltz on 2006-06-22 17:34
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a critical halt in production. Urgent repair service needed to resolve issue swiftly and resume operation as soon as possible.

—> Purchase or Repair:
#Procond Elettronica by villain on 2011-05-17 07:30
Cherche module Brandt C 3220X/1

—> Purchase or Repair:
Good afternoon, I`m looking for a module Procond Elettronica 3560089039 for a washdisher Fagor, and also the price.Thank you very much.

—> Purchase or Repair:
#Procond Elettronica by Ray Hazard on 2006-11-08 10:57
The treadmill controller (Procond Elettronica MC-70 124438) is malfunctioning, causing a halt in production. Urgent repair service is required to resume operations immediately.

—> Purchase or Repair:
#Procond Elettronica by sanjay on 2008-11-21 22:35
R57 resistance value is 1k ohms wire wound around 5watts. presently i am looking for the value of R68. can you help?sanjay

—> Purchase or Repair:
#Procond Elettronica by Mustafa Çolak on 2006-12-18 03:04
I'm sorry to hear that your Procond Elettronica MC-70 124438 treadmill board is acting up. It seems like something has stopped working, but I'm not exactly sure which part of the machine is affected. I recommend contacting a professional technician to diagnose the issue and provide a suitable soluti…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Reimert on 2007-09-30 14:53
HelloIm also would like to test this my module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this module *******Waht is the cost for repair? What is the cost for a new one?GE Procond ElettronicaType P. 451510051 Type E. 12430392/5SW Ver. W2C01250 2…Purchase or Repair: Ticket Image...
Show More

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.