NSK Service & Repair Forum

Dear Sir / MadamWe need repair or buy servo drive M-ESA-Y2020 G23have you an office or desk manager in Indonesia or Singapore ?We will appreciate for your immediately reply.Best Regards,MarhaeniPurchasing of PT. Akeda Multi MediaJl. KH. Moh. Mansyur No. 11 Blok B 8-12Jakarta 10140 - INDONESIA.Telp. 6221 - 63862651 / 52Fax. 6221 - 63862653skype : marhaeni19

β€”> Purchase or Repair: Ticket Image

β€” Posted by Marhaeni Tambrin on 2009-05-29

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "NSK"

If you need your NSK unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 96 Comments

#NSK by Moises Tovar on 2009-06-03 21:56
I need a Nsk driverEE0608A05-24.2 or substituteThank you

β€”> Purchase or Repair:
#NSK by James Park on 2010-10-20 00:24
Hello,We have a upper and lower driver we need to get repaired. The type is ESA-B014CFC-21 and the NO. is B-13004-700. They both are not accurate so we were wondering if we can send them to you guys and have the calibrated. Please give me a call back or shoot me an email and hopefully we can figure …Purchase or Repair: Ticket Image...
Show More
#NSK by Hans van der Hoorn on 2025-06-01 18:27
The NSK EM1010A15-05 drive unit is not working. Please check and repair.

β€”> Purchase or Repair:
#NSK by Sergio Rodriguez on 2012-06-14 22:38
NSK Servo Drive Repair Model: EM1010A15-05 We have a NSK Servo Drive in bad conditions, when we turn on the machine light leds.I appreciate your comments, in case that you can to repair my servo drive.Best Regards Sergio Rodriguez Plant chiefProduction DepartmentAv. Los pinos #7 A Col. Los pinosGuad…Purchase or Repair: Ticket Image...
Show More
#NSK by Virgil on 2014-12-28 10:06
NSK ESA 4-65006-700 drive just failed, need urgent attention. Moving to next machine now to continue rounds.

β€”> Purchase or Repair:
#NSK by HOVANEC on 2025-06-07 00:25
Can the NSK ESB014CF1-01A drive be repaired or replaced? I'm trying to check this off my to-do list. Thank you!

β€”> Purchase or Repair:
#NSK by ScottHug on 2017-10-14 02:46
#NSK by Mrs Mohan on 2007-05-24 13:41
The above mentioned drive needs repair.

β€”> Purchase or Repair:
#NSK by Amal Raj on 2009-04-27 16:31
Dear sirPlz send pdf ofesa-b045af3-21RegardsS.Amal Raj

β€”> Purchase or Repair:
#NSK by dao on 2023-09-30 00:00
The Nsk esa-j1003af2-11 ESA Servo Drive is malfunctioning, causing a production line downtime. Urgent repair is needed to restore operations

β€”> Purchase or Repair:
#NSK by Mcguinness on 2014-12-23 15:06
Please provide me with detailed information about the NSK ESA 4-34018-700 Drive. We are looking into the possibility of finding replacement parts or repair options for this unit. Could you please confirm if it is still supported or if any parts are available for it? Thank you. β€”> …Purchase or Repair: Ticket Image...
Show More
#NSK by Dave Allen on 2009-01-19 14:09
We have a problem with ALL of our Tacumi toolchanger magazine carousels, when the magazine 1st homes the position is ALWAYS different.This is the SAME problem on EVERY machine.They all use the same NSK drive and motor.Drive type: ESA-Y3040T25-21 Motor type: YS3040FN501, No. 3Y31019Can you offer ANY …Purchase or Repair: Ticket Image...
Show More
#NSK by Marcell on 2014-07-29 21:24
The NSK ESA 4-65006-700 drive seems to be experiencing some issues, as something has stopped working. I apologize for not being able to provide a more detailed description, but we'll do our best to get it sorted out for you. Thank you for your understanding.

β€”> Purchase or Repair:
#NSK by BesterPreisvergleich on 2011-12-04 10:31
Hallo, ich habe eine tolle Seite entdeckt,bei der man einfach den billigsten Preis fΓΌr allerlei Dinge suchen kann. Hier ist der link Bester Preisvergleich Ach ja, ausserdem findet man dort jede Menge Gutscheine, was natΓΌrlich toll ist!.

β€”> Purchase or Repair:
#NSK by Victor sciarrillo( delta steel) on 2012-01-23 16:36
We have a couple machines that use NSK drivesType:EM1010A15-05No. 103554-591The machine manufacturer said they are obsolete and can\'t sell us one. We willbuy new or rebuilt if you have either.

β€”> Purchase or Repair:
#NSK by Chester Yong on 2010-08-12 09:15
dear sir,I would to check that do you able to repair this NSK driver model: ESA 23?

β€”> Purchase or Repair:
#NSK by Cheol Min Part on 2009-06-25 14:17
Dear Sir.I wonder whether you can fix this driver or not.(M-ELC-JG014VF1)If you can, let me know estimates and delivery time.If you need picture, I\'ll send you some pictures.Thanks.

β€”> Purchase or Repair:
#NSK by Des on 2014-05-03 07:20
Hello, I am interested in purchasing the NSK ESA 4-34018-700 Drive. I am looking to source one quickly and wanted to inquire about pricing and availability. Thank you!

β€”> Purchase or Repair:
#NSK by Singletary on 2014-12-05 00:23
Do you have an NSK ESA 4-65006-700 drive available for sale or repair? Need it urgently to keep production running smoothly. Thank you.

β€”> Purchase or Repair:
#NSK by marjan cresnar on 2008-04-08 06:53
we have a problem whit NSK servo drive Type ESA-Y2020T23-11Nr. Z-85192 -700Fault on electronic plate NSK Eo43SACB1-001Pleace give as offer for repaire or a new one.Best RegardsMarjan

β€”> Purchase or Repair:
#NSK by Kevin Lim on 2011-05-24 01:23
My Scanray X-ray systems having the problem to activite X-ray operation, every time I\'m switched on the X-ray operation and it turn down immediately, and the control panel can not adjust the Ma setting. it is always fixed at 2Ma.

β€”> Purchase or Repair:
#NSK by TOMAS MARIN on 2010-07-02 23:25
I GOT A PROBLEM BUT I DONT KNOW WHERE COULD BE IF IN MOTOR OR IN DRIVE MY DRIVE IS AN NSK ESA Y3040TF120 AND THE MOTOR THE FAULT ON THE DRIVE IS F-1 AND A- 4 AND THE MAIN PROBLEM IS ON THE TOURRET INDEXING SO I CAN NOT SEE ON DYSPLAY THE NUMBER OF THE TOOL

β€”> Purchase or Repair:
#NSK by valerio hernandez on 2024-08-20 13:55
The NSK ELA-B014CFC-03 unit in the warehouse is displaying unusual behavior; it's not functioning as it normally does. Please investigate the issue further to determine the cause and potential solution.

β€”> Purchase or Repair:
#NSK by Curtis Indy on 2011-01-31 14:34
We are running an NSK ESA-Y2020A25-21 drive. On startup it displays an error code of E0A4. What is this error and is it a repair situation?

β€”> Purchase or Repair:
#NSK by Jesus Escobedo on 2009-10-02 17:48
We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,JesΓΊs EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuada…Purchase or Repair: Ticket Image...
Show More
#NSK by Henri on 2014-01-05 10:53
Hello, I'm in the purchasing department and a colleague needs a replacement for an NSK ESA 4-65006-700 Drive. We can't locate one. Could you provide repair information? Thanks!

β€”> Purchase or Repair:
#NSK by KUMARADEVAN SANTANADEWAN on 2009-06-08 10:55
I have one unit of NSK motor controller model NSK AMD EXC3 for repair.I would like to have advice, the frequent faulty of this module during production. Most of the fauly is burn IC of M1050 at Y and X- axis motor. Pls advice!

β€”> Purchase or Repair:
#NSK by Mark Proctor on 2007-04-03 10:08
NSK ES3040K23-03 Servo DriveHi, We have an NSK ES3040K23-03 servo drive that requires repair.Do you have a fixed price repair on this unit?Please advise as soon as possible.ThanksMark Proctor

β€”> Purchase or Repair:
#NSK by karim on 2006-03-06 00:00
NSK 4083141 showing no power or response when turned on. Need immediate repair service to diagnose and fix issue.

β€”> Purchase or Repair:
#NSK by Navjot Singh on 2007-09-24 11:06
plz email the detail Manual and Software for NSK Servo ESA B045Af3-21 . with Regard Navjot Singh

β€”> Purchase or Repair:
#NSK by SABINUS on 2025-05-23 13:43
Hello, do you have an NSK ESA-B014CFD-21 driver available for sale or repair? Need it urgently for production. Thank you.

β€”> Purchase or Repair:
#NSK by Animesh on 2008-09-25 15:52
I have got a problem that the servo motor is getting fault.How could I repair when I get P1,P2 such kind of warning.

β€”> Purchase or Repair:
#NSK by Jim Bianchi on 2014-12-29 13:54
I am following up on the previous message regarding the NSK ESA 4-65006-700 Drive unit. The unit is still down. Please ensure someone gets back to me

β€”> Purchase or Repair:
#NSK by Ray Paden on 2014-12-17 05:44
The NSK ESA 4-65006-700 drive unit malfunctioned today at 1045 AM, causing unexpected downtime on the production line. Can you quickly check the issue and provide a solution before the next shift starts? Thank you.

β€”> Purchase or Repair:
#NSK by Alain David on 2014-01-17 15:55
I am a business customer inquiring about repair service for my NSK FMDI 01 MDI Pendant. The unit is not turning on at all, despite multiple attempts to power it up. I have checked the power source and cables, and they seem to be in proper working condition. The estimated replacement cost for a new N…Purchase or Repair: Ticket Image...
Show More
#NSK by Kohlbrenner Chris on 2008-02-11 08:31
Hello, we have a Problem with an NSK \"ESA Y2020 TF6-20\", No: 2-05407-700. It shows \"F 4\" on the Display and we don\'t know, what that means. Please send us an Answer as soon as possible.Please send us also a list of every possible Alarm, which could be shown on the Display.The Adress is above, p…Purchase or Repair: Ticket Image...
Show More
#NSK by Olaf Rekman on 2010-03-24 16:51
Dear sir,I am looking for a new or rebuilded NSK driver TYPE EMB014AF-2-05Please let me know.Regards - Olaf

β€”> Purchase or Repair:
#NSK by Pelc on 2014-12-28 15:06
Hello, I'm reaching out on behalf of a client who has an NSK ESA 4-65006-700 Drive that needs repair. Can you please provide information on how we can proceed with the repair process and obtain a quote? Thank you.

β€”> Purchase or Repair:
#NSK by yasser on 2009-12-05 13:34
good evening .i hope all stuff ok. plz i have proplem, in my netestal machine about robot moving hand .this problem come from servo drive give me error f4 and i read in book its friom emergency switch but i check all emergency ok. i try another drive it work and give letter C but problem difference …Purchase or Repair: Ticket Image...
Show More
#NSK by Maher Amara on 2011-11-16 11:48
If it\'s possible to repqir the SERVO DRIVE NSK type EMOAOBK13-05SPR-T4/Z-NS

β€”> Purchase or Repair:
#NSK by MARIO BALANDRAN on 2013-02-06 23:44
we are look9ing for KSK drive EE1010A98-25

β€”> Purchase or Repair:
#NSK by Mendieta on 2014-12-17 00:44
Hello, the NSK ESA 4-34018-700 Drive unit is still down. Please provide an update

β€”> Purchase or Repair:
#NSK by mdali on 2014-12-25 07:44
Hello, I am inquiring about part number NSK ESA 4-34018-700 described as a drive. My client is experiencing an issue with it. Can you please provide information on how we can proceed with repair or troubleshooting? Thank you.

β€”> Purchase or Repair:
#NSK by ANIL KUMAR P on 2008-08-21 09:05
Dear sir Please send english vertion manual of K20093-01-01 . PDF manual belongs to NSK servo drive model no. = β€šdβ€šwβ€šdβ€š`β€šP|β€šOβ€šOβ€šPβ€šOβ€š`β€šOβ€šO|β€šOβ€šRRegardsAnil

β€”> Purchase or Repair:
#NSK by azadeh on 2014-05-01 22:20
Hello, our NSK ESA 4-65006-700 drive is down with error code E302. Urgent assistance needed to troubleshoot and resolve the issue. Thank you.

β€”> Purchase or Repair:
#NSK by Gilberto Saraiva on 2008-03-14 00:18
Good Morning:I need the manual of servo drive EM0608A05-05 NSK. Could you help-me please?.Thanks a lot

β€”> Purchase or Repair:
#NSK by Thoma on 2014-02-17 07:58
Hello, I'm interested in the NSK ESA 4-65006-700 drive. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you!

β€”> Purchase or Repair:
#NSK by Andy on 2012-11-29 23:44
We are working on our study thesis and our problem is we can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive and how we could possible sol…Purchase or Repair: Ticket Image...
Show More
#NSK by Tafheem on 2013-04-30 00:00
NSK ESA-Y3008A25-21 power supply unit is not turning on despite being plugged in. Need immediate repair assistance.

β€”> Purchase or Repair:
#NSK by Eric Enloe on 2014-02-14 11:58
Hello, I'm reaching out on behalf of a client who needs assistance with an NSK ESA 4-65006-700 drive. Can you please provide information on repair services available for this part? Thank you.

β€”> Purchase or Repair:

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.