Elektronikon Service & Repair Forum

Could you please confirm if the Elektronikon Atlas Copco 1900070008 is still supported, and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair: Ticket Image

— Posted by United on 2009-11-13

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Elektronikon"

If you need your Elektronikon unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 462 Comments

#Elektronikon by Dave sinclair on 2015-03-28 13:59
Looking for repair services for my Elektronikon Atlas Copco 1900 0700 05 controller as it is malfunctioning. Need assistance as soon as possible to get it back up and running at our industrial site.

—> Purchase or Repair:
#Elektronikon by Bob Scott on 2009-10-08 11:22
Can you please provide repair information for an Elektronikon Atlas Copco 1900070008 digital readout unit? It has stopped working and we need to get it fixed as soon as possible. Thank you!

—> Purchase or Repair:
#Elektronikon by Mr Kenneth Opoku on 2008-03-16 07:28
Hello, I'm in the purchasing department and I need repair information for an Elektronikon 1900-0590-16 master control module. It stopped working and we need a replacement. Can you please provide assistance quickly on this matter? Thank you.

—> Purchase or Repair:
#Elektronikon by mukund on 2008-03-08 07:19
Can the Elektronikon 4900-0590-26 support control module be repaired or purchased? I'm looking to check this off my to-do list.

—> Purchase or Repair:
#Elektronikon by Haggins on 2009-03-12 07:11
I'm experiencing an issue with the Elektronikon Atlas Copco 1900070008. The digital readout seems to have stopped working. I will need assistance to troubleshoot and resolve this problem.

—> Purchase or Repair:
#Elektronikon by Gava on 2015-02-23 04:47
Hey there, can you please provide us with repair info for the Elektronikon Atlas Copco 1900 0700 05 controller unit? It's currently not working and we need a replacement. Your urgent assistance would be greatly appreciated.

—> Purchase or Repair:
#Elektronikon by Eric Libermann on 2009-06-12 23:28
the Elektronikon Atlas Copco 1900070008 unit went down mid-shift. Digital readout isn't working. Please have someone check it out in the morning. Thanks!

—> Purchase or Repair:
#Elektronikon by Relays on 2015-08-08 22:20
alarm on Elektronikon Atlas Copco 1900 0700 05 controller, unit down. Please check it out in the morning shift. Thanks!

—> Purchase or Repair:
#Elektronikon by Eduardo camargo on 2015-07-08 01:32
The Elektronikon Atlas Copco 1900 0700 05 controller unit is not powering on.

—> Purchase or Repair:
#Elektronikon by douglas j coombs on 2009-08-17 20:09
The Elektronikon Atlas Copco 1900070008 is not functioning properly. The unit has a digital readout, but I am not entirely sure about its function.

—> Purchase or Repair:
#Elektronikon by R.Baskaran on 2009-12-14 08:48
I need to fix my Elektronikon Atlas Copco 1900070008 unit - the digital readout is not functioning properly. Looking for a technician who can repair industrial equipment.

—> Purchase or Repair:
#Elektronikon by Meenakshi on 2008-10-13 04:37
My client has an Elektronikon 4900-0590-26 support control module that needs repair. Please provide information on how to proceed with the repair process. Thank you.

—> Purchase or Repair:
#Elektronikon by San on 2013-08-11 02:35
My Elektronikon Atlas Copco (1900070007) controller seems to be malfunctioning. It's not displaying any data readings or responding to input commands. Looking for a technician who can repair this industrial unit

—> Purchase or Repair:
#Elektronikon by Glen LaBar on 2008-05-01 15:33
Hello, I hope this message finds you well. I am inquiring about the pricing and availability of the Elektronikon 1900-0590-16 master control module. I am interested in sourcing one quickly and would appreciate any information you can provide. Thank you.

—> Purchase or Repair:
#Elektronikon by esteban on 2015-08-13 13:20
The Elektronikon Atlas Copco 1900 0700 05 is not working properly. Please check and troubleshoot the issue.

—> Purchase or Repair:
#Elektronikon by Riccardo on 2013-04-17 00:56
I need urgent help with my Elektronikon Atlas Copco 1900 0700 05 controller as it's not powering on and unresponsive. Looking for a reliable technician for repairs.

—> Purchase or Repair:
#Elektronikon by George Gorsky on 2009-06-09 03:01
I believe there may be an issue with the Elektronikon Atlas Copco 1900070008 digital readout. The machine seems to have stopped working properly. We should have it looked at by a technician to determine the cause of the problem.

—> Purchase or Repair:
#Elektronikon by Jeff Thoma on 2015-07-11 18:32
Dear ,I have an Elektronikon Atlas Copco 1900 0700 07 control unit that needs to be fixed or replaced. Can you confirm if it can be repaired or if I need to purchase a new one? I'd appreciate your

—> Purchase or Repair:
#Elektronikon by Larry Beattie on 2009-10-16 19:31
Hello, I'm interested in purchasing the Elektronikon Atlas Copco 1900070008 digital readout unit. I'm trying to source one quickly and would like to inquire about pricing and availability. Thank you!

—> Purchase or Repair:
#Elektronikon by boluso on 2015-07-27 10:20
the Elektronikon Atlas Copco 1900 0700 07 control unit went down mid-shift. Need someone to check it out ASAP. Thanks!

—> Purchase or Repair:
#Elektronikon by Burdge on 2015-01-10 08:41
The Elektronikon Atlas Copco 1900 0700 07 Control Unit is failing, affecting the production line. Need immediate repair service to minimize downtime. Swift action is required.

—> Purchase or Repair:
#Elektronikon by Mundo on 2013-04-30 20:33
Can you please confirm if the Elektronikon Atlas Copco 1900 0700 05 controller is still supported or if replacement parts are available for it?

—> Purchase or Repair:
#Elektronikon by Christoph Scholtes on 2009-01-24 02:59
The Elektronikon Atlas Copco 1900070008 is showing error code E123. Equipment is not powering on. Need urgent assistance to troubleshoot and resolve. Thank you.

—> Purchase or Repair:
#Elektronikon by Venkat on 2009-10-16 20:31
The Elektronikon Atlas Copco 1900070008 digital readout unit is not working.

—> Purchase or Repair:
#Elektronikon by herb rusaw on 2009-03-11 12:11
We experienced downtime with the Elektronikon Atlas Copco 1900070008 unit today at 230 pm. The digital readout stopped displaying data, which led to a halt in operations. Need a quick resolution before the next shift.

—> Purchase or Repair:
#Elektronikon by j.sivasankaran on 2009-10-23 10:15
Please provide an update on the status of the Elektronikon Atlas Copco 1900070008 unit as it is still down. Your

—> Purchase or Repair:
#Elektronikon by Steve Pickel on 2008-01-09 07:12
I will reach out and inquire about the support and availability of parts for your Elektronikon 4900-0590-26 control module.

—> Purchase or Repair:
#Elektronikon by andy varenhorst on 2009-04-28 23:42
The Elektronikon unit with digital readout (1900070008) is not working.

—> Purchase or Repair:
#Elektronikon by magnien on 2008-05-20 19:29
We are still experiencing issues with the Elektronikon Atlas Copco 1900 0598 02 master control module. Please provide an update on the situation

—> Purchase or Repair:
#Elektronikon by marlon mejala on 2015-07-27 00:20
The Elektronikon Atlas Copco 1900 0700 07 controller is displaying unusual behavior in the warehouse. It is not performing its normal functions.

—> Purchase or Repair:
#Elektronikon by Mike kunkel on 2013-12-25 13:17
Could you please confirm if the Elektronikon Atlas Copco 1900070007 controller is still supported, and if parts are available for repair or replacement?

—> Purchase or Repair:
#Elektronikon by ana on 2009-03-13 16:59
The Elektronikon Atlas Copco 1900070008 experienced a digital readout issue which led to downtime. This occurred today during the night shift please advise on how to resolve this before the next shift starts. Thank you.

—> Purchase or Repair:
#Elektronikon by Brice w Holmes on 2015-08-11 01:20
Please provide information and possible solutions for Elektronikon Atlas Copco 1900 0700 07 Control Unit. Thank you.

—> Purchase or Repair:
#Elektronikon by SELIM on 2009-12-04 04:00
The Elektronikon Atlas Copco 1900070008 unit has a digital readout malfunction. Requires attention and troubleshooting, possibly a sensor issue. Please check and diagnose during the day shift. Thanks!

—> Purchase or Repair:
#Elektronikon by SHAMIM aHMAD on 2009-12-31 23:02
The Elektronikon Atlas Copco 1900070008 digital readout is not functioning.

—> Purchase or Repair:
#Elektronikon by Kevin McKenzie on 2009-10-30 15:08
I'm currently experiencing issues with our Elektronikon Atlas Copco 1900070008. The digital readout seems to have stopped working. I will need to get this checked out by a technician.

—> Purchase or Repair:
#Elektronikon by Rafael Pichardo on 2009-07-16 09:46
just a heads up that the Elektronikon on Atlas Copco 1900070008 is down - looks like a failed drive or board. Heading over to check it out now.

—> Purchase or Repair:
#Elektronikon by michael channell on 2009-03-03 20:53
Elektronikon Atlas Copco 1900070008 is displaying error code 1234.

—> Purchase or Repair:
#Elektronikon by GEORGE LARA GEORGE on 2013-06-01 01:45
We experienced downtime due to an issue with Elektronikon 19000598 control unit. It occurred today during our shift. Need solution before next shift.

—> Purchase or Repair:
#Elektronikon by Eubanks on 2008-03-21 21:53
unit 1900 0598 02, Elektronikon Atlas Copco master control module is down. Needs attention. See you in the morning!

—> Purchase or Repair:
#Elektronikon by Witold on 2009-08-20 20:29
Elektronikon Atlas Copco 1900070008 digital readout displaying error code 7.

—> Purchase or Repair:
#Elektronikon by Kulpa on 2009-11-17 22:47
Experiencing issues with Elektronikon Atlas Copco 1900070008 digital readout, not displaying data. Need repair service urgently.

—> Purchase or Repair:
#Elektronikon by John E Wieler on 2015-03-09 14:13
Received alarm Elektronikon Atlas Copco 1900 0700 07 - Control Unit failure. Board/drive replacement needed ASAP. Continuing rounds to assess other machines.

—> Purchase or Repair:
#Elektronikon by Michelle Hurley on 2015-07-24 06:43
The Elektronikon Atlas Copco 1900 0700 05 controller unit malfunctioned today during our shift, causing unexpected downtime for the production line from 230 PM to 415 PM. Can you quickly investigate the issue and provide a solution before the next shift starts? Thank you!

—> Purchase or Repair:
#Elektronikon by Myron Archambeau on 2008-12-30 04:20
Hey there, we're in need of repair info for an Elektronikon 1900-0590-16 master control module. Could you please provide details on how we can get it fixed? Thanks!

—> Purchase or Repair:
#Elektronikon by Guy Hampton on 2009-08-16 08:54
The Elektronikon Atlas Copco 1900070008 digital readout unit is not working correctly and needs attention from the maintenance team.

—> Purchase or Repair:
#Elektronikon by kevin thomas on 2008-07-31 18:10
Hello, I'm interested in the Elektronikon 1900 0701 24 controller. I would like to inquire about pricing and availability as I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Elektronikon by Bellora on 2015-03-08 14:13
Do you have an Elektronikon Atlas Copco 1900 0700 05 controller available for sale or repair? Our unit went down and we need to keep production running.

—> Purchase or Repair:
#Elektronikon by fabiio on 2013-06-07 16:40
Having issues with Elektronikon Atlas Copco 1900 0700 05 controller. Needs repair ASAP. Contact if you can fix industrial unit, thanks.

—> Purchase or Repair:
#Elektronikon by Prado on 2013-09-11 04:28
The Elektronikon Atlas Copco 1900 0700 05 is a controller unit that the maintenance team is having trouble with. They need assistance in troubleshooting or repairing it.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.