Procond Elettronica Service & Repair Forum

Hello, can zou give me a price for follow boardType P. 451510050Type E. 12430392/4SW Ver. W2C01202ThanksbrMarc Schmuck

—> Purchase or Repair: Ticket Image

— Posted by marc schmuck on 2010-03-29

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 569 Comments

#Procond Elettronica by Detlef Rinke on 2010-04-13 20:58
Hello,I am search with the condensator unit.as the delivery terms are for Germany?ThanksD.RinkeIn German:Hallo,ich such dieses besagte Kondensatoreinheit.Was für Lieferkonditionnen haben Sie für Deutschland?DankeD.Rinke

—> Purchase or Repair:
#Procond Elettronica by villain on 2011-05-17 07:30
Cherche module Brandt C 3220X/1

—> Purchase or Repair:
#Procond Elettronica by David Richardson on 2006-11-08 12:57
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Urgent repair service is needed to quickly get the line back up and running efficiently.

—> Purchase or Repair:
#Procond Elettronica by Ruben Sousa on 2012-12-15 21:17
Hi there.I want to ask if you have this part supply on stock?!The reference is 132400 / 413 26 005.If you do, just tell me how much is the price in total with shipping to Portugal.Thank you very much.

—> Purchase or Repair:
#Procond Elettronica by karim on 2006-12-08 21:16
The board in the Procond Elettronica MC-70 124438 treadmill controller has failed, needs replacement ASAP. Please order a new one to ensure timely repair.

—> Purchase or Repair:
#Procond Elettronica by Sally Chen on 2006-06-22 15:34
The treadmill controller for the Procond Elettronica MC-70 124438 is malfunctioning, impacting production. Urgent attention and repair service are needed to resolve this issue swiftly.

—> Purchase or Repair:
#Procond Elettronica by Esparza on 2007-04-05 00:56
I am following up on my previous message regarding the Procond Elettronica MC-70 124438 treadmill controller. The unit is still not functioning. Please provide assistance

—> Purchase or Repair:
#Procond Elettronica by A. Redd on 2007-12-22 19:29
Proform 725si (PFTL 72560) board ID 170-0518 rev. 2.Do you have replacement board (new or refurb.)? What is the cost to repair?

—> Purchase or Repair:
#Procond Elettronica by allermann on 2007-06-01 04:50
One of the Procond Elettronica MC-70 124438 treadmill controllers is displaying unusual behavior in the warehouse.

—> Purchase or Repair:
#Procond Elettronica by johnny on 2007-10-18 20:17
where to buy these diodes?Thanks,

—> Purchase or Repair:
#Procond Elettronica by rodrigo alliende on 2005-12-14 17:39
The Procond Elettronica MC-70 124438 treadmill board is displaying abnormal behavior in the warehouse. It is not functioning as it usually does, acting weird and not performing its usual operations.

—> Purchase or Repair:
#Procond Elettronica by Ben Hinx on 2011-04-21 10:10
Is it possible to purchase the control unit for an AEG Oko Lavamat 72630 update:GE Procond Elettronicatype P - 451510051 F:4875Type E - 12430392/5SW Ver - W2C01250 26/00

—> Purchase or Repair:
#Procond Elettronica by Joseph Krug on 2005-11-23 01:08
I received the MC-70 motor controller board back today. It works perfectly, and I wish to thank you for your one-day turn around time and quick return shipping. Your service is better than you advertise, which is unusual and greatly appreciated.Thank You again!!!A very satisfied customer!!—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by MALIK RIAZ on 2011-05-18 08:18
I HAVE MC-70 MOTOR CONTROLLER CARD, PLEAS I WANT TO KNOW SOME PARTS VALUES OF THESE LOCATION ,R57,DZ1,DZ4 ITS BURNED WITH OVER VOLTS

—> Purchase or Repair:
#Procond Elettronica by David Phillips on 2005-12-29 23:51
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, halting production. Urgent repair service needed to restore operations

—> Purchase or Repair:
#Procond Elettronica by Fred Santizo on 2006-01-29 05:40
Dear Sir/Madam:I need a device with tree switches. It must create the PWM to control the speed of a treadmill motor controller. One of the switch will turn on/off the treadmill the other two will be use to increase/decrease the speed of the motor or the treadmill. I want to eliminate the console of …Purchase or Repair: Ticket Image...
Show More
module doesnt work,no output

—> Purchase or Repair:
#Procond Elettronica by Gerry Miller on 2006-12-24 04:00
Hello, do you have a Procond Elettronica 452200190 KK88102678 board available for sale or repair? Our unit is down, and we need to keep production running. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Dodds on 2007-09-18 22:05
Do you have a Procond Elettronica MC-70 124438 treadmill controller available for sale? Production is currently down, and we need to get it running again. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Shovers on 2007-11-02 23:28
MC-70 124438 treadmill controller not responding to power.

—> Purchase or Repair:
#Procond Elettronica by WILDKATmln on 2022-03-07 20:36
manuscripts held onto

—> Purchase or Repair:
#Procond Elettronica by mr m ibrar on 2013-11-25 15:15
The red light is all the time flashing, when the the compressor first comes on it stays on for good 5-10 min and goes to standby and then when it comes back on after a while it stays on for round about 3 min and there about . The supper freeze dose not come on as well, so i will be very great full i…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by JUGIE on 2019-02-05 19:38
HiI need schematic of this board Procond Elettronica 3560101029thanks

—> Purchase or Repair:
#Procond Elettronica by Zsohár Imre on 2013-03-30 16:21
Please help me!AEG LAVATHERM Dryer turns off after 10 seconds.PNC: 91601416300S / N: 34285616I do not know what is wrong!

—> Purchase or Repair:
Me gustaria tener el diagrama electrico de su tarjeta con numero de parte 124438. Es posible conseguirla?

—> Purchase or Repair:
#Procond Elettronica by James Kollaja on 2006-06-22 18:29
The treadmill board on the Procond Elettronica MC-7012 124438 is malfunctioning, affecting the production line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:
#Procond Elettronica by hodovanic on 2020-08-10 15:32
Board failure on Procond Elettronica NTTL1407, need immediate replacement. Initiating troubleshooting steps, will update with a progress report soon.

—> Purchase or Repair:
#Procond Elettronica by Guenat on 2011-08-22 14:52
Bonjour je recherche le module Procond elettronica 3560089039 pour un lave vaisselle FAGOR et le prixMerci

—> Purchase or Repair:
#Procond Elettronica by SELVARAJ on 2006-01-12 19:49
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, disrupting the production line. Please address this issue immediately to ensure operations can resume smoothly.

—> Purchase or Repair:
#Procond Elettronica by Frank on 2011-02-06 07:06
Does anyone know where I can get the circuit diagram for Procond Elettronica board n. 3560033089 or at least the value of RV8?Many thanks

—> Purchase or Repair:
#Procond Elettronica by brusselle on 2015-06-21 10:48
Hello, I need where to buy or repair a Procond elettronica 3560089039 module and the price.

—> Purchase or Repair:
#Procond Elettronica by Jim Cox on 2008-08-22 01:18
There is no resistor in R17 and JP1 and JP2 should be jumpered. What value do you have for R57?

—> Purchase or Repair:
i need repair a module 170-0518 rev.2 im live in mexico

—> Purchase or Repair:
#Procond Elettronica by vdandapani on 2007-08-15 02:10
The Procond Elettronica MC-70 124438 treadmill controller in the warehouse is behaving oddly. It is not functioning as it usually does and seems to have some unusual behavior.

—> Purchase or Repair:
#Procond Elettronica by Kosiecki on 2007-10-31 03:37
I'm sorry to hear that your Procond Elettronica MC-70 124438 treadmill controller is not functioning properly. It seems like there is an issue with the machine, but I'm uncertain about the exact problem. I recommend contacting a professional technician to diagnose and fix the problem for you.—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Jeff Spriggs on 2007-11-01 22:15
Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Procond Elettronica by suparjo on 2012-03-20 11:32
My LUX washing machine was in problem. According to the technision the CPU is not working properly. He remove the CPU but he did not sure.The CPU written as below:GE Procond ElettronicaType P451510093 F:6473Type E.124303983SW Ver.W2C01551 24/giu./05My questions are:1. Can that unit be repair2. if it…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by MARTIN Alain on 2007-09-09 14:48
HelloIs it possible to have a schematic or technical datasheet of this module :Type P 451510061 F:6210Type E 12430392/7SW ver W2C013T2 31/01BEST REGARDS

—> Purchase or Repair:
#Procond Elettronica by MAnuel Osegueda on 2006-01-07 22:04
Procond Elettronica MC-70 124438 treadmill controller malfunctioning, halting production. Urgent repair service needed to rectify issue

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, affecting the production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#Procond Elettronica by Josephfug on 2022-01-12 00:21
I just want to say thank you for this great forum. I found a solution here on computer-cnc-repair.info for my issue.

—> Purchase or Repair:
#Procond Elettronica by philip on 2007-04-04 00:19
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a significant disruption to the production line. Urgent repair service is required to address this critical issue

—> Purchase or Repair:
#Procond Elettronica by Joseph on 2007-02-03 22:39
Can you please advise what it would cost to repair a MC-70 board for my Nordic Track treadmill? The power supply board has all the LED\'s lit (the PWM flashes only when it calls for speed). The motor works (I\'ve used a 12 vdc power supply to test). I\'ve also checked to make sure that 120Vac is sup…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Willie Jimenez on 2005-12-08 07:52
The Procond Elettronica MC-70 124438 treadmill board is displaying unusual behavior in the warehouse.

—> Purchase or Repair:
#Procond Elettronica by kenneth Anderson on 2006-02-04 02:00
I would like to thank the people and Industrial Electronic Repair for repairing a mc-70 motor control boad. I was working on an elderly couples treadmill and found the control board defective, when I contacted Industrial I explained how they were elderly and didn\'t have a lot of money. Industrial o…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Jimmy Paragh on 2008-11-11 12:02
Hello , please send me the prize of the controll board Procond Electtronica Type Procond 451513003 Type E.Z. 132120000 SW Ver. W1D00109 07/03 I have been around to ask on several places here in Holland and found that the prize that i have to pay here is so high that if you put a € 100 on top of the …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Doris Reveron on 2007-09-13 08:54
Hello, we're looking for repair information for a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide details on how to fix or replace the controller? Thanks.

—> Purchase or Repair:
#Procond Elettronica by Jimmy Paragh on 2008-11-10 09:10
Hello , i am looking for a washing machine Electronic part, please let me know the prize and how to get it as quick as possible? Procond Elettronica Type Procond 451513003 Type E.Z 132120000 SW Ver. W1D00109 07/03

—> Purchase or Repair:
#Procond Elettronica by Doug Taylor on 2006-12-01 18:16
The Procond Elettronica MC-70 124438 treadmill controller unit is exhibiting abnormal behavior in the warehouse.

—> Purchase or Repair:
#Procond Elettronica by Dan Baldauf on 2008-06-20 23:44
I have a treadmill that when turned on starts slowly for about 1 minute and then shuts down. it displays an Er2 error message. Any thoughts on what is wrong the cost it might be to fix it.????Dan

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.